Re: [PATCH v3 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL

[Andre Przywara <andre.przywara@arm.com>]

On Wed, 23 Oct 2024 20:56:57 +1300
Ryan Walklin <ryan@testtoast.com> wrote:

Hi Ryan,

> Allwinner has previously released a H616 audio driver which also
> provides sigma-delta modulation for the audio PLL clocks. This approach
> is used in other Allwinner SoCs, including the H3 and A64.
> 
> The manual-provided clock values are:
> PLL_AUDIO(hs) = 24 MHz*N/M1
> PLL_AUDIO(4X) = 24 MHz*N/M0/M1/P
> PLL_AUDIO(2X) = 24 MHz*N/M0/M1/P/2
> PLL_AUDIO(1X) = 24 MHz*N/M0/M1/P/4
> 
> A fixed post-divider of 2 is used to account for a M0 divider of
> 2, which cannot be modelled by the existing macros and ccu_nm struct.
> 
> Add SDM to the H616 clock control unit driver.

Thanks for the changes in the comments, that looks all good to me. I am
still scratching my head on why Allwinner promotes odd dividers, when
they somewhat warn about them in the manual, but I trust the wisdom of the
BSP here, and it certainly works. If any issues arise, we can always fix
that later.

> Signed-off-by: Ryan Walklin <ryan@testtoast.com>

Confirmed that the registers and bits match the manual, and the SDM values
also add up to reach those frequencies:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> 
> ---
> Changelog v1..v2:
> - Add fixed_post_div to high-speed audio clock to correct M0 value to 1 (ie divide by 2) based on manual
> - Correct PLL_AUDIO_(4/2/1)X clocks to manual-provided values
> - Add/correct inline comments for the above.
> - add CCU_FEATURE_FIXED_POSTDIV to pll_audio_hs_clk.common.features
> 
> Changelog v2..v3:
> - Update comments and commit message to more accurately reflect SDM changes and rationale
> ---
>  drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 46 +++++++++++++++++---------
>  1 file changed, 30 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> index 6c7623d4c59ea..05727fa1ee46e 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> @@ -215,20 +215,30 @@ static struct ccu_nkmp pll_de_clk = {
>  	},
>  };
>  
> -/*
> - * TODO: Determine SDM settings for the audio PLL. The manual suggests
> - * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b
> - * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2,
> - * pattern=0xe001288c for 22.5792 MHz.
> - * This clashes with our fixed PLL_POST_DIV_P.
> +/* 
> + * Sigma-delta modulation settings table obtained from the vendor SDK driver.
> + * There are additional M0 and M1 divider bits not modelled here, so forced to
> + * fixed values in the probe routine. Sigma-delta modulation allows providing a
> + * fractional-N divider in the PLL, to help reaching those specific
> + * frequencies with less error.
>   */
> +static struct ccu_sdm_setting pll_audio_sdm_table[] = {
> +	{ .rate = 90316800, .pattern = 0xc001288d, .m = 3, .n = 22 },
> +	{ .rate = 98304000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
> +};
> +
>  #define SUN50I_H616_PLL_AUDIO_REG	0x078
>  static struct ccu_nm pll_audio_hs_clk = {
>  	.enable		= BIT(31),
>  	.lock		= BIT(28),
>  	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
> -	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
> +	.m		= _SUNXI_CCU_DIV(16, 6),
> +	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table,
> +					 BIT(24), 0x178, BIT(31)),
> +	.fixed_post_div = 2,
>  	.common		= {
> +		.features	= CCU_FEATURE_FIXED_POSTDIV | 
> +				  CCU_FEATURE_SIGMA_DELTA_MOD,
>  		.reg		= 0x078,
>  		.hw.init	= CLK_HW_INIT("pll-audio-hs", "osc24M",
>  					      &ccu_nm_ops,
> @@ -701,18 +711,20 @@ static const struct clk_hw *clk_parent_pll_audio[] = {
>  };
>  
>  /*
> - * The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
> - * rates can be set exactly in conjunction with sigma-delta modulation.
> + * The PLL_AUDIO_4X clock defaults to 24.5714 MHz according to the manual, with 
> + * a final divider of 1. The 2X and 1X clocks use 2 and 4 respectively. The 1x 
> + * clock is set to either 24576000 or 22579200 for 48Khz and 44.1Khz (and 
> + * multiples).
>   */
>  static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
>  			    clk_parent_pll_audio,
> -			    96, 1, CLK_SET_RATE_PARENT);
> +			    4, 1, CLK_SET_RATE_PARENT);
>  static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
>  			    clk_parent_pll_audio,
> -			    48, 1, CLK_SET_RATE_PARENT);
> +			    2, 1, CLK_SET_RATE_PARENT);
>  static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
>  			    clk_parent_pll_audio,
> -			    24, 1, CLK_SET_RATE_PARENT);
> +			    1, 1, CLK_SET_RATE_PARENT);
>  
>  static const struct clk_hw *pll_periph0_parents[] = {
>  	&pll_periph0_clk.common.hw
> @@ -1162,12 +1174,14 @@ static int sun50i_h616_ccu_probe(struct platform_device *pdev)
>  	}
>  
>  	/*
> -	 * Force the post-divider of pll-audio to 12 and the output divider
> -	 * of it to 2, so 24576000 and 22579200 rates can be set exactly.
> +	 * Set the output-divider for the pll-audio clocks (M0) to 2 and the
> +	 * input divider (M1) to 1 as recommended by the manual when using 
> +	 * SDM. 
>  	 */
>  	val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
> -	val &= ~(GENMASK(21, 16) | BIT(0));
> -	writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG);
> +	val &= ~BIT(1);
> +	val |= BIT(0);
> +	writel(val, reg + SUN50I_H616_PLL_AUDIO_REG);
>  
>  	/*
>  	 * First clock parent (osc32K) is unusable for CEC. But since there