[PATCH AUTOSEL 6.6 02/15] ASoC: amd: yc: Add quirk for ASUS Vivobook S15 M3502RA

[PATCH AUTOSEL 6.6 02/15] ASoC: amd: yc: Add quirk for ASUS Vivobook S15 M3502RA

[Sasha Levin]

From: Christian Heusel <christian@heusel.eu>

[ Upstream commit 182fff3a2aafe4e7f3717a0be9df2fe2ed1a77de ]

As reported the builtin microphone doesn't work on the ASUS Vivobook
model S15 OLED M3502RA. Therefore add a quirk for it to make it work.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219345
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20241010-bugzilla-219345-asus-vivobook-v1-1-3bb24834e2c3@heusel.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 248e3bcbf386b..d03e95844c3a8 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -339,6 +339,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "M7600RE"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M3502RA"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.6 03/15] ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 54c805c1eb264c839fa3027d0073bb7f323b0722 ]

Irq handler need to be executed as fast as possible, so
the log in irq handler is better to use dev_dbg which needs
to be enabled when debugging.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/1728622433-2873-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_esai.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index d0d8a01da9bdd..0cf9484183d43 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -119,10 +119,10 @@ static irqreturn_t esai_isr(int irq, void *devid)
 		dev_dbg(&pdev->dev, "isr: Transmission Initialized\n");
 
 	if (esr & ESAI_ESR_RFF_MASK)
-		dev_warn(&pdev->dev, "isr: Receiving overrun\n");
+		dev_dbg(&pdev->dev, "isr: Receiving overrun\n");
 
 	if (esr & ESAI_ESR_TFE_MASK)
-		dev_warn(&pdev->dev, "isr: Transmission underrun\n");
+		dev_dbg(&pdev->dev, "isr: Transmission underrun\n");
 
 	if (esr & ESAI_ESR_TLS_MASK)
 		dev_dbg(&pdev->dev, "isr: Just transmitted the last slot\n");
-- 
2.43.0

[PATCH AUTOSEL 6.6 04/15] ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA

[Sasha Levin]

From: Ilya Dudikov <ilyadud@mail.ru>

[ Upstream commit b0867999e3282378a0b26a7ad200233044d31eca ]

ASUS Vivobook E1404FA needs a quirks-table entry for the internal microphone to function properly.

Signed-off-by: Ilya Dudikov <ilyadud@mail.ru>
Link: https://patch.msgid.link/20241016034038.13481-1-ilyadud25@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index d03e95844c3a8..859161194af10 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -325,6 +325,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "M6500RC"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1404FA"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.6 10/15] ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue

[Sasha Levin]

From: Jack Yu <jack.yu@realtek.com>

[ Upstream commit 038fa6ddf5d22694f61ff7a7a53c8887c6b08c45 ]

clk_stop_timeout should be increased to 900ms to fix clock stop issue.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/cd26275d9fc54374a18dc016755cb72d@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt722-sdca-sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c
index 32578a212642e..91314327d9eee 100644
--- a/sound/soc/codecs/rt722-sdca-sdw.c
+++ b/sound/soc/codecs/rt722-sdca-sdw.c
@@ -253,7 +253,7 @@ static int rt722_sdca_read_prop(struct sdw_slave *slave)
 	}
 
 	/* set the timeout values */
-	prop->clk_stop_timeout = 200;
+	prop->clk_stop_timeout = 900;
 
 	/* wake-up event */
 	prop->wake_capable = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.6 13/15] ASoC: fsl_micfil: Add sample rate constraint

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit b9a8ecf81066e01e8a3de35517481bc5aa0439e5 ]

On some platforms, for example i.MX93, there is only one
audio PLL source, so some sample rate can't be supported.
If the PLL source is used for 8kHz series rates, then 11kHz
series rates can't be supported.

So add constraints according to the frequency of available
clock sources, then alsa-lib will help to convert the
unsupported rate for the driver.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1728884313-6778-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_micfil.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 0d37edb70261c..551c49ed375ef 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -28,6 +28,13 @@
 
 #define MICFIL_OSR_DEFAULT	16
 
+#define MICFIL_NUM_RATES	7
+#define MICFIL_CLK_SRC_NUM	3
+/* clock source ids */
+#define MICFIL_AUDIO_PLL1	0
+#define MICFIL_AUDIO_PLL2	1
+#define MICFIL_CLK_EXT3		2
+
 enum quality {
 	QUALITY_HIGH,
 	QUALITY_MEDIUM,
@@ -45,9 +52,12 @@ struct fsl_micfil {
 	struct clk *mclk;
 	struct clk *pll8k_clk;
 	struct clk *pll11k_clk;
+	struct clk *clk_src[MICFIL_CLK_SRC_NUM];
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 	struct sdma_peripheral_config sdmacfg;
 	struct snd_soc_card *card;
+	struct snd_pcm_hw_constraint_list constraint_rates;
+	unsigned int constraint_rates_list[MICFIL_NUM_RATES];
 	unsigned int dataline;
 	char name[32];
 	int irq[MICFIL_IRQ_LINES];
@@ -449,12 +459,34 @@ static int fsl_micfil_startup(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
 	struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai);
+	unsigned int rates[MICFIL_NUM_RATES] = {8000, 11025, 16000, 22050, 32000, 44100, 48000};
+	int i, j, k = 0;
+	u64 clk_rate;
 
 	if (!micfil) {
 		dev_err(dai->dev, "micfil dai priv_data not set\n");
 		return -EINVAL;
 	}
 
+	micfil->constraint_rates.list = micfil->constraint_rates_list;
+	micfil->constraint_rates.count = 0;
+
+	for (j = 0; j < MICFIL_NUM_RATES; j++) {
+		for (i = 0; i < MICFIL_CLK_SRC_NUM; i++) {
+			clk_rate = clk_get_rate(micfil->clk_src[i]);
+			if (clk_rate != 0 && do_div(clk_rate, rates[j]) == 0) {
+				micfil->constraint_rates_list[k++] = rates[j];
+				micfil->constraint_rates.count++;
+				break;
+			}
+		}
+	}
+
+	if (micfil->constraint_rates.count > 0)
+		snd_pcm_hw_constraint_list(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_RATE,
+					   &micfil->constraint_rates);
+
 	return 0;
 }
 
@@ -1124,6 +1156,12 @@ static int fsl_micfil_probe(struct platform_device *pdev)
 	fsl_asoc_get_pll_clocks(&pdev->dev, &micfil->pll8k_clk,
 				&micfil->pll11k_clk);
 
+	micfil->clk_src[MICFIL_AUDIO_PLL1] = micfil->pll8k_clk;
+	micfil->clk_src[MICFIL_AUDIO_PLL2] = micfil->pll11k_clk;
+	micfil->clk_src[MICFIL_CLK_EXT3] = devm_clk_get(&pdev->dev, "clkext3");
+	if (IS_ERR(micfil->clk_src[MICFIL_CLK_EXT3]))
+		micfil->clk_src[MICFIL_CLK_EXT3] = NULL;
+
 	/* init regmap */
 	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(regs))
-- 
2.43.0