Linux Sound subsystem development
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: peter.ujfalusi@gmail.com, broonie@kernel.org
Cc: lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
	jarkko.nikula@bitmer.com, linux-sound@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 2/7] ASoC: ti: omap-dmic: Use guard() for mutex locks
Date: Fri,  8 May 2026 17:38:32 +0700	[thread overview]
Message-ID: <20260508103837.138142-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260508103837.138142-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Replace open-coded mutex_lock()/mutex_unlock() pairs with guard(mutex)()
and scoped_guard() helpers.

This also simplifies the control flow by removing temporary return
variables and unnecessary goto-based cleanup paths.

No functional change intended.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/ti/omap-dmic.c | 44 ++++++++++++++++------------------------
 1 file changed, 18 insertions(+), 26 deletions(-)

diff --git a/sound/soc/ti/omap-dmic.c b/sound/soc/ti/omap-dmic.c
index fb92bb88eb5c..dc92fdb89a0f 100644
--- a/sound/soc/ti/omap-dmic.c
+++ b/sound/soc/ti/omap-dmic.c
@@ -91,18 +91,14 @@ static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
 	struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
-	int ret = 0;
-
-	mutex_lock(&dmic->mutex);
 
-	if (!snd_soc_dai_active(dai))
-		dmic->active = 1;
-	else
-		ret = -EBUSY;
+	guard(mutex)(&dmic->mutex);
 
-	mutex_unlock(&dmic->mutex);
+	if (snd_soc_dai_active(dai))
+		return -EBUSY;
 
-	return ret;
+	dmic->active = 1;
+	return 0;
 }
 
 static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
@@ -110,14 +106,12 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
 {
 	struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
 
-	mutex_lock(&dmic->mutex);
+	guard(mutex)(&dmic->mutex);
 
 	cpu_latency_qos_remove_request(&dmic->pm_qos_req);
 
 	if (!snd_soc_dai_active(dai))
 		dmic->active = 0;
-
-	mutex_unlock(&dmic->mutex);
 }
 
 static int omap_dmic_select_divider(struct omap_dmic *dmic, int sample_rate)
@@ -334,26 +328,24 @@ static int omap_dmic_select_fclk(struct omap_dmic *dmic, int clk_id,
 		return -ENODEV;
 	}
 
-	mutex_lock(&dmic->mutex);
-	if (dmic->active) {
-		/* disable clock while reparenting */
-		pm_runtime_put_sync(dmic->dev);
-		ret = clk_set_parent(mux, parent_clk);
-		pm_runtime_get_sync(dmic->dev);
-	} else {
-		ret = clk_set_parent(mux, parent_clk);
+	scoped_guard(mutex, &dmic->mutex) {
+		if (dmic->active) {
+			/* disable clock while reparenting */
+			pm_runtime_put_sync(dmic->dev);
+			ret = clk_set_parent(mux, parent_clk);
+			pm_runtime_get_sync(dmic->dev);
+		} else {
+			ret = clk_set_parent(mux, parent_clk);
+		}
 	}
-	mutex_unlock(&dmic->mutex);
 
 	if (ret < 0) {
 		dev_err(dmic->dev, "re-parent failed\n");
-		goto err_busy;
+	} else {
+		dmic->sysclk = clk_id;
+		dmic->fclk_freq = freq;
 	}
 
-	dmic->sysclk = clk_id;
-	dmic->fclk_freq = freq;
-
-err_busy:
 	clk_put(mux);
 	clk_put(parent_clk);
 
-- 
2.43.0


  parent reply	other threads:[~2026-05-08 10:39 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-08 10:38 [PATCH 0/7] ASoC: ti: Cleanup locking code using guard() helpers phucduc.bui
2026-05-08 10:38 ` [PATCH 1/7] ASoC: ti: j721e-evm: Use guard() for mutex locks phucduc.bui
2026-05-08 10:38 ` phucduc.bui [this message]
2026-05-08 10:38 ` [PATCH 3/7] ASoC: ti: omap-hdmi: " phucduc.bui
2026-05-08 10:38 ` [PATCH 4/7] ASoC: ti: omap-mcpdm: " phucduc.bui
2026-05-08 10:38 ` [PATCH 5/7] ASoC: ti: ams-delta: Use guard() for spin locks phucduc.bui
2026-05-08 10:38 ` [PATCH 6/7] ASoC: ti: omap-mcbsp-st: " phucduc.bui
2026-05-09 12:26   ` Jarkko Nikula
2026-05-08 10:38 ` [PATCH 7/7] ASoC: ti: omap-mcbsp: Simplify lock and resource handling phucduc.bui
2026-05-10  1:35   ` Mark Brown
2026-05-11  4:44     ` Bui Duc Phuc
2026-05-09 12:28 ` [PATCH 0/7] ASoC: ti: Cleanup locking code using guard() helpers Jarkko Nikula
2026-05-11  0:58 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260508103837.138142-3-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=broonie@kernel.org \
    --cc=jarkko.nikula@bitmer.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=peter.ujfalusi@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox