Linux Sound subsystem development
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	nuno.sa@analog.com, Shenghao Ding <shenghao-ding@ti.com>,
	Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>, Sen Wang <sen@ti.com>,
	Steven Eckhoff <steven.eckhoff.opensource@gmail.com>,
	Srinivas Kandagatla <srini@kernel.org>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Linus Walleij <linusw@kernel.org>,
	u.kleine-koenig@baylibre.com,
	Thorsten Blum <thorsten.blum@linux.dev>,
	Kees Cook <kees@kernel.org>, Chen Ni <nichen@iscas.ac.cn>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
	Pengpeng Hou <pengpeng@iscas.ac.cn>,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
	linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 12/26] ASoC: codecs: wcd934x: Use guard() for mutex locks
Date: Thu, 23 Jul 2026 11:53:13 +0700	[thread overview]
Message-ID: <20260723045327.28260-13-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260723045327.28260-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/codecs/wcd934x.c | 42 ++++++++++++++------------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index bc41a1466c70..11108c37648f 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -1265,13 +1265,10 @@ static int wcd934x_set_sido_input_src(struct wcd934x_codec *wcd, int sido_src)
 
 static int wcd934x_enable_ana_bias_and_sysclk(struct wcd934x_codec *wcd)
 {
-	mutex_lock(&wcd->sysclk_mutex);
-
-	if (++wcd->sysclk_users != 1) {
-		mutex_unlock(&wcd->sysclk_mutex);
-		return 0;
+	scoped_guard(mutex, &wcd->sysclk_mutex) {
+		if (++wcd->sysclk_users != 1)
+			return 0;
 	}
-	mutex_unlock(&wcd->sysclk_mutex);
 
 	regmap_update_bits(wcd->regmap, WCD934X_ANA_BIAS,
 			   WCD934X_ANA_BIAS_EN_MASK,
@@ -1328,12 +1325,10 @@ static int wcd934x_enable_ana_bias_and_sysclk(struct wcd934x_codec *wcd)
 
 static int wcd934x_disable_ana_bias_and_syclk(struct wcd934x_codec *wcd)
 {
-	mutex_lock(&wcd->sysclk_mutex);
-	if (--wcd->sysclk_users != 0) {
-		mutex_unlock(&wcd->sysclk_mutex);
-		return 0;
+	scoped_guard(mutex, &wcd->sysclk_mutex) {
+		if (--wcd->sysclk_users != 0)
+			return 0;
 	}
-	mutex_unlock(&wcd->sysclk_mutex);
 
 	regmap_update_bits(wcd->regmap, WCD934X_CLK_SYS_MCLK_PRG,
 			   WCD934X_EXT_CLK_BUF_EN_MASK |
@@ -2384,7 +2379,7 @@ static int wcd934x_micbias_control(struct snd_soc_component *component,
 			__func__, micb_num);
 		return -EINVAL;
 	}
-	mutex_lock(&wcd934x->micb_lock);
+	guard(mutex)(&wcd934x->micb_lock);
 
 	switch (req) {
 	case MICB_PULLUP_ENABLE:
@@ -2446,8 +2441,6 @@ static int wcd934x_micbias_control(struct snd_soc_component *component,
 		break;
 	}
 
-	mutex_unlock(&wcd934x->micb_lock);
-
 	return 0;
 }
 
@@ -2488,7 +2481,7 @@ static int wcd934x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
 					    int req_volt, int micb_num)
 {
 	struct wcd934x_codec *wcd934x = snd_soc_component_get_drvdata(component);
-	int cur_vout_ctl, req_vout_ctl, micb_reg, micb_en, ret = 0;
+	int cur_vout_ctl, req_vout_ctl, micb_reg, micb_en;
 
 	switch (micb_num) {
 	case MIC_BIAS_1:
@@ -2506,7 +2499,7 @@ static int wcd934x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
 	default:
 		return -EINVAL;
 	}
-	mutex_lock(&wcd934x->micb_lock);
+	guard(mutex)(&wcd934x->micb_lock);
 	/*
 	 * If requested micbias voltage is same as current micbias
 	 * voltage, then just return. Otherwise, adjust voltage as
@@ -2521,15 +2514,11 @@ static int wcd934x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
 						    WCD934X_MICB_VAL_MASK);
 
 	req_vout_ctl = wcd_get_micb_vout_ctl_val(component->dev, req_volt);
-	if (req_vout_ctl < 0) {
-		ret = -EINVAL;
-		goto exit;
-	}
+	if (req_vout_ctl < 0)
+		return -EINVAL;
 
-	if (cur_vout_ctl == req_vout_ctl) {
-		ret = 0;
-		goto exit;
-	}
+	if (cur_vout_ctl == req_vout_ctl)
+		return 0;
 
 	if (micb_en == WCD934X_MICB_ENABLE)
 		snd_soc_component_write_field(component, micb_reg,
@@ -2550,9 +2539,8 @@ static int wcd934x_mbhc_micb_adjust_voltage(struct snd_soc_component *component,
 		 */
 		usleep_range(2000, 2100);
 	}
-exit:
-	mutex_unlock(&wcd934x->micb_lock);
-	return ret;
+
+	return 0;
 }
 
 static int wcd934x_mbhc_micb_ctrl_threshold_mic(struct snd_soc_component *component,
-- 
2.43.0


  parent reply	other threads:[~2026-07-23  4:55 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-23  4:53 [PATCH 00/26] ASoC: codecs: Use guard() for mutex & spin locks - part 3 phucduc.bui
2026-07-23  4:53 ` [PATCH 01/26] ASoC: codecs: sigmadsp: Use guard() for mutex locks phucduc.bui
2026-07-23  4:53 ` [PATCH 02/26] ASoC: codecs: sta350: " phucduc.bui
2026-07-23  4:53 ` [PATCH 03/26] ASoC: codecs: sta32x: " phucduc.bui
2026-07-23  4:53 ` [PATCH 04/26] ASoC: codecs: tas2781: " phucduc.bui
2026-07-23  4:53 ` [PATCH 05/26] ASoC: codecs: tas2783: " phucduc.bui
2026-07-23  4:53 ` [PATCH 06/26] ASoC: codecs: tas5805m: " phucduc.bui
2026-07-23  4:53 ` [PATCH 07/26] ASoC: codecs: tlv320dac33: Use guard() for mutex & spin locks phucduc.bui
2026-07-23  4:53 ` [PATCH 08/26] ASoC: codecs: tscs42xx: Use guard() for mutex locks phucduc.bui
2026-07-23  4:53 ` [PATCH 09/26] ASoC: codecs: tscs454: " phucduc.bui
2026-07-23  4:53 ` [PATCH 10/26] ASoC: codecs: twl6040: " phucduc.bui
2026-07-23  4:53 ` [PATCH 11/26] ASoC: codecs: wcd-mbhc: " phucduc.bui
2026-07-23  4:53 ` phucduc.bui [this message]
2026-07-23  4:53 ` [PATCH 13/26] ASoC: codecs: wcd937x: " phucduc.bui
2026-07-23  4:53 ` [PATCH 14/26] ASoC: codecs: wcd938x: " phucduc.bui
2026-07-23  4:53 ` [PATCH 15/26] ASoC: codecs: wcd939x: " phucduc.bui
2026-07-23  4:53 ` [PATCH 16/26] ASoC: codecs: wm0010: Use guard() for mutex & spin locks phucduc.bui
2026-07-23  4:53 ` [PATCH 17/26] ASoC: codecs: wm2000: Use guard() for mutex locks phucduc.bui
2026-07-23  4:53 ` [PATCH 18/26] ASoC: codecs: wm5102: " phucduc.bui
2026-07-23  4:53 ` [PATCH 19/26] ASoC: codecs: wm8731: " phucduc.bui
2026-07-23  4:53 ` [PATCH 20/26] ASoC: codecs: wm8903: " phucduc.bui
2026-07-23  4:53 ` [PATCH 21/26] ASoC: codecs: wm8958: " phucduc.bui
2026-07-23  4:53 ` [PATCH 22/26] ASoC: codecs: wm8962: " phucduc.bui
2026-07-23  4:53 ` [PATCH 23/26] ASoC: codecs: wm8994: " phucduc.bui
2026-07-23  4:53 ` [PATCH 24/26] ASoC: codecs: wm971x: " phucduc.bui
2026-07-23  4:53 ` [PATCH 25/26] ASoC: codecs: wm_adsp: " phucduc.bui
2026-07-23  4:53 ` [PATCH 26/26] ASoC: codecs: wsa88xx: " phucduc.bui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260723045327.28260-13-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=baojun.xu@ti.com \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=kees@kernel.org \
    --cc=kevin-lu@ti.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=nichen@iscas.ac.cn \
    --cc=nuno.sa@analog.com \
    --cc=patches@opensource.cirrus.com \
    --cc=pengpeng@iscas.ac.cn \
    --cc=perex@perex.cz \
    --cc=rf@opensource.cirrus.com \
    --cc=sebastian.krzyszkowiak@puri.sm \
    --cc=sen@ti.com \
    --cc=shenghao-ding@ti.com \
    --cc=shengjiu.wang@nxp.com \
    --cc=srini@kernel.org \
    --cc=steven.eckhoff.opensource@gmail.com \
    --cc=thorsten.blum@linux.dev \
    --cc=tiwai@suse.com \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox