From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Lars-Peter Clausen <lars@metafoo.de>,
nuno.sa@analog.com, Shenghao Ding <shenghao-ding@ti.com>,
Kevin Lu <kevin-lu@ti.com>
Cc: Baojun Xu <baojun.xu@ti.com>, Sen Wang <sen@ti.com>,
Steven Eckhoff <steven.eckhoff.opensource@gmail.com>,
Srinivas Kandagatla <srini@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Linus Walleij <linusw@kernel.org>,
u.kleine-koenig@baylibre.com,
Thorsten Blum <thorsten.blum@linux.dev>,
Kees Cook <kees@kernel.org>, Chen Ni <nichen@iscas.ac.cn>,
Bartosz Golaszewski <brgl@kernel.org>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Pengpeng Hou <pengpeng@iscas.ac.cn>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 07/26] ASoC: codecs: tlv320dac33: Use guard() for mutex & spin locks
Date: Thu, 23 Jul 2026 11:53:08 +0700 [thread overview]
Message-ID: <20260723045327.28260-8-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260723045327.28260-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/codecs/tlv320dac33.c | 87 ++++++++++++++--------------------
1 file changed, 36 insertions(+), 51 deletions(-)
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 223c49dfc450..9bd2ddd8dacd 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -7,6 +7,7 @@
* Copyright: (C) 2009 Nokia Corporation
*/
+#include <linux/cleanup.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
@@ -236,13 +237,10 @@ static int dac33_write_locked(struct snd_soc_component *component, unsigned int
unsigned int value)
{
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
- int ret;
- mutex_lock(&dac33->mutex);
- ret = dac33_write(component, reg, value);
- mutex_unlock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
- return ret;
+ return dac33_write(component, reg, value);
}
#define DAC33_I2C_ADDR_AUTOINC 0x80
@@ -365,13 +363,13 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
int ret = 0;
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
/* Safety check */
if (unlikely(power == dac33->chip_power)) {
dev_dbg(component->dev, "Trying to set the same power state: %s\n",
power ? "ON" : "OFF");
- goto exit;
+ return ret;
}
if (power) {
@@ -380,7 +378,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret != 0) {
dev_err(component->dev,
"Failed to enable supplies: %d\n", ret);
- goto exit;
+ return ret;
}
if (dac33->reset_gpiod) {
@@ -388,7 +386,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret < 0) {
dev_err(&dac33->i2c->dev,
"Failed to set reset GPIO: %d\n", ret);
- goto exit;
+ return ret;
}
}
@@ -400,7 +398,7 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret < 0) {
dev_err(&dac33->i2c->dev,
"Failed to set reset GPIO: %d\n", ret);
- goto exit;
+ return ret;
}
}
@@ -409,14 +407,12 @@ static int dac33_hard_power(struct snd_soc_component *component, int power)
if (ret != 0) {
dev_err(component->dev,
"Failed to disable supplies: %d\n", ret);
- goto exit;
+ return ret;
}
dac33->chip_power = 0;
}
-exit:
- mutex_unlock(&dac33->mutex);
return ret;
}
@@ -659,7 +655,6 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_component *component = dac33->component;
unsigned int delay;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
@@ -667,10 +662,10 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
DAC33_THRREG(dac33->nsample));
/* Take the timestamps */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp2 = ktime_to_us(ktime_get());
- dac33->t_stamp1 = dac33->t_stamp2;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ dac33->t_stamp2 = ktime_to_us(ktime_get());
+ dac33->t_stamp1 = dac33->t_stamp2;
+ }
dac33_write16(component, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
@@ -682,11 +677,11 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
break;
case DAC33_FIFO_MODE7:
/* Take the timestamp */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp1 = ktime_to_us(ktime_get());
- /* Move back the timestamp with drain time */
- dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ dac33->t_stamp1 = ktime_to_us(ktime_get());
+ /* Move back the timestamp with drain time */
+ dac33->t_stamp1 -= dac33->mode7_us_to_lthr;
+ }
dac33_write16(component, DAC33_PREFILL_MSB,
DAC33_THRREG(DAC33_MODE7_MARGIN));
@@ -704,14 +699,12 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_component *component = dac33->component;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
/* Take the timestamp */
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp2 = ktime_to_us(ktime_get());
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock)
+ dac33->t_stamp2 = ktime_to_us(ktime_get());
dac33_write16(component, DAC33_NSAMPLE_MSB,
DAC33_THRREG(dac33->nsample));
@@ -735,7 +728,7 @@ static void dac33_work(struct work_struct *work)
dac33 = container_of(work, struct tlv320dac33_priv, work);
component = dac33->component;
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
switch (dac33->state) {
case DAC33_PREFILL:
dac33->state = DAC33_PLAYBACK;
@@ -757,18 +750,15 @@ static void dac33_work(struct work_struct *work)
dac33_write(component, DAC33_FIFO_CTRL_A, reg);
break;
}
- mutex_unlock(&dac33->mutex);
}
static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
{
struct snd_soc_component *component = dev;
struct tlv320dac33_priv *dac33 = snd_soc_component_get_drvdata(component);
- unsigned long flags;
- spin_lock_irqsave(&dac33->lock, flags);
- dac33->t_stamp1 = ktime_to_us(ktime_get());
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock)
+ dac33->t_stamp1 = ktime_to_us(ktime_get());
/* Do not schedule the workqueue in Mode7 */
if (dac33->fifo_mode != DAC33_FIFO_MODE7)
@@ -902,14 +892,13 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream,
return -EINVAL;
}
- mutex_lock(&dac33->mutex);
+ guard(mutex)(&dac33->mutex);
if (!dac33->chip_power) {
/*
* Chip is not powered yet.
* Do the init in the dac33_set_bias_level later.
*/
- mutex_unlock(&dac33->mutex);
return 0;
}
@@ -1053,8 +1042,6 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream,
break;
}
- mutex_unlock(&dac33->mutex);
-
return 0;
}
@@ -1156,21 +1143,20 @@ static snd_pcm_sframes_t dac33_dai_delay(
unsigned int time_delta, uthr;
int samples_out, samples_in, samples;
snd_pcm_sframes_t delay = 0;
- unsigned long flags;
switch (dac33->fifo_mode) {
case DAC33_FIFO_BYPASS:
break;
case DAC33_FIFO_MODE1:
- spin_lock_irqsave(&dac33->lock, flags);
- t0 = dac33->t_stamp1;
- t1 = dac33->t_stamp2;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ t0 = dac33->t_stamp1;
+ t1 = dac33->t_stamp2;
+ }
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t1)
- goto out;
+ return 0;
if (t0 > t1) {
/*
@@ -1230,23 +1216,22 @@ static snd_pcm_sframes_t dac33_dai_delay(
}
break;
case DAC33_FIFO_MODE7:
- spin_lock_irqsave(&dac33->lock, flags);
- t0 = dac33->t_stamp1;
- uthr = dac33->uthr;
- spin_unlock_irqrestore(&dac33->lock, flags);
+ scoped_guard(spinlock_irqsave, &dac33->lock) {
+ t0 = dac33->t_stamp1;
+ uthr = dac33->uthr;
+ }
t_now = ktime_to_us(ktime_get());
/* We have not started to fill the FIFO yet, delay is 0 */
if (!t0)
- goto out;
+ return 0;
if (t_now <= t0) {
/*
* Either the timestamps are messed or equal. Report
* maximum delay
*/
- delay = uthr;
- goto out;
+ return uthr;
}
time_delta = t_now - t0;
@@ -1287,7 +1272,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
dac33->fifo_mode);
break;
}
-out:
+
return delay;
}
--
2.43.0
next prev parent reply other threads:[~2026-07-23 4:54 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 4:53 [PATCH 00/26] ASoC: codecs: Use guard() for mutex & spin locks - part 3 phucduc.bui
2026-07-23 4:53 ` [PATCH 01/26] ASoC: codecs: sigmadsp: Use guard() for mutex locks phucduc.bui
2026-07-23 4:53 ` [PATCH 02/26] ASoC: codecs: sta350: " phucduc.bui
2026-07-23 4:53 ` [PATCH 03/26] ASoC: codecs: sta32x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 04/26] ASoC: codecs: tas2781: " phucduc.bui
2026-07-23 4:53 ` [PATCH 05/26] ASoC: codecs: tas2783: " phucduc.bui
2026-07-23 4:53 ` [PATCH 06/26] ASoC: codecs: tas5805m: " phucduc.bui
2026-07-23 4:53 ` phucduc.bui [this message]
2026-07-23 4:53 ` [PATCH 08/26] ASoC: codecs: tscs42xx: " phucduc.bui
2026-07-23 4:53 ` [PATCH 09/26] ASoC: codecs: tscs454: " phucduc.bui
2026-07-23 4:53 ` [PATCH 10/26] ASoC: codecs: twl6040: " phucduc.bui
2026-07-23 4:53 ` [PATCH 11/26] ASoC: codecs: wcd-mbhc: " phucduc.bui
2026-07-23 4:53 ` [PATCH 12/26] ASoC: codecs: wcd934x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 13/26] ASoC: codecs: wcd937x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 14/26] ASoC: codecs: wcd938x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 15/26] ASoC: codecs: wcd939x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 16/26] ASoC: codecs: wm0010: Use guard() for mutex & spin locks phucduc.bui
2026-07-23 9:30 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 17/26] ASoC: codecs: wm2000: Use guard() for mutex locks phucduc.bui
2026-07-23 9:50 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 18/26] ASoC: codecs: wm5102: " phucduc.bui
2026-07-23 9:51 ` Richard Fitzgerald
2026-07-23 10:46 ` Mark Brown
2026-07-23 4:53 ` [PATCH 19/26] ASoC: codecs: wm8731: " phucduc.bui
2026-07-23 9:55 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 20/26] ASoC: codecs: wm8903: " phucduc.bui
2026-07-23 9:56 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 21/26] ASoC: codecs: wm8958: " phucduc.bui
2026-07-23 9:54 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 22/26] ASoC: codecs: wm8962: " phucduc.bui
2026-07-23 9:53 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 23/26] ASoC: codecs: wm8994: " phucduc.bui
2026-07-23 9:48 ` Richard Fitzgerald
2026-07-23 4:53 ` [PATCH 24/26] ASoC: codecs: wm971x: " phucduc.bui
2026-07-23 4:53 ` [PATCH 25/26] ASoC: codecs: wm_adsp: " phucduc.bui
2026-07-23 9:42 ` Richard Fitzgerald
2026-07-23 9:50 ` Bui Duc Phuc
2026-07-23 4:53 ` [PATCH 26/26] ASoC: codecs: wsa88xx: " phucduc.bui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723045327.28260-8-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=baojun.xu@ti.com \
--cc=brgl@kernel.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=kees@kernel.org \
--cc=kevin-lu@ti.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nichen@iscas.ac.cn \
--cc=nuno.sa@analog.com \
--cc=patches@opensource.cirrus.com \
--cc=pengpeng@iscas.ac.cn \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=shengjiu.wang@nxp.com \
--cc=srini@kernel.org \
--cc=steven.eckhoff.opensource@gmail.com \
--cc=thorsten.blum@linux.dev \
--cc=tiwai@suse.com \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox