* [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files [not found] <20260908152808.3928630-1-arnd@kernel.org> @ 2026-09-08 15:27 ` Arnd Bergmann 2026-09-08 15:34 ` Mark Brown ` (7 more replies) 0 siblings, 8 replies; 9+ messages in thread From: Arnd Bergmann @ 2026-09-08 15:27 UTC (permalink / raw) To: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio From: Arnd Bergmann <arnd@arndb.de> The 'orion' platform is the predecessor to what linux now calls the 'mvebu' line of Marvell SoCs, and originally covered orion5x, mv78xx0, kirkwood, dove and a few others that do not have any upstream support at the moment. Only a few board files remain here, these are the ones left in 2022 board file purge because they had some level of support in Debian or OpenWRT, mostly for commercial NAS or router boxes. This distro support is now gone, and nobody has converted the board files to devicetree, though the orion5x and dove platforms also come with devicetree support for some other machines. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Jeremy J. Peper <jeremy@jeremypeper.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Niklas Cassel <cassel@kernel.org> Cc: Ulf Hansson <ulfh@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Cc: Linus Walleij <linusw@kernel.org> Cc: Bartosz Golaszewski <brgl@kernel.org> Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-rtc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Cc: linux-sound@vger.kernel.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- MAINTAINERS | 2 - arch/arm/Kconfig | 2 - arch/arm/Kconfig.debug | 2 +- arch/arm/Makefile | 2 - arch/arm/configs/dove_defconfig | 134 --- arch/arm/configs/mv78xx0_defconfig | 120 --- arch/arm/mach-dove/Kconfig | 32 - arch/arm/mach-dove/Makefile | 7 - arch/arm/mach-dove/bridge-regs.h | 50 -- arch/arm/mach-dove/cm-a510.c | 94 -- arch/arm/mach-dove/common.c | 449 ---------- arch/arm/mach-dove/common.h | 46 - arch/arm/mach-dove/dove.h | 185 ---- arch/arm/mach-dove/irq.c | 81 -- arch/arm/mach-dove/irqs.h | 89 -- arch/arm/mach-dove/mpp.c | 159 ---- arch/arm/mach-dove/mpp.h | 197 ----- arch/arm/mach-dove/pcie.c | 226 ----- arch/arm/mach-dove/pm.h | 58 -- arch/arm/mach-mv78xx0/Kconfig | 27 - arch/arm/mach-mv78xx0/Makefile | 5 - arch/arm/mach-mv78xx0/bridge-regs.h | 31 - arch/arm/mach-mv78xx0/buffalo-wxl-setup.c | 183 ---- arch/arm/mach-mv78xx0/common.c | 444 ---------- arch/arm/mach-mv78xx0/common.h | 54 -- arch/arm/mach-mv78xx0/irq.c | 69 -- arch/arm/mach-mv78xx0/irqs.h | 87 -- arch/arm/mach-mv78xx0/mpp.c | 34 - arch/arm/mach-mv78xx0/mpp.h | 337 ------- arch/arm/mach-mv78xx0/mv78xx0.h | 134 --- arch/arm/mach-mv78xx0/pcie.c | 280 ------ arch/arm/mach-orion5x/Kconfig | 95 -- arch/arm/mach-orion5x/Makefile | 9 - arch/arm/mach-orion5x/board-dt.c | 3 +- arch/arm/mach-orion5x/common.c | 238 +---- arch/arm/mach-orion5x/common.h | 15 - arch/arm/mach-orion5x/dns323-setup.c | 757 ---------------- arch/arm/mach-orion5x/kurobox_pro-setup.c | 407 --------- arch/arm/mach-orion5x/mv2120-setup.c | 256 ------ arch/arm/mach-orion5x/net2big-setup.c | 444 ---------- arch/arm/mach-orion5x/pci.c | 1 - .../arm/mach-orion5x/terastation_pro2-setup.c | 366 -------- arch/arm/mach-orion5x/ts209-setup.c | 331 ------- arch/arm/mach-orion5x/ts409-setup.c | 329 ------- arch/arm/mach-orion5x/ts78xx-fpga.h | 42 - arch/arm/mach-orion5x/ts78xx-setup.c | 574 ------------ arch/arm/mach-orion5x/tsx09-common.c | 129 --- arch/arm/mach-orion5x/tsx09-common.h | 21 - arch/arm/mm/Kconfig | 2 +- arch/arm/plat-orion/Makefile | 2 +- arch/arm/plat-orion/common.c | 826 ------------------ arch/arm/plat-orion/include/plat/addr-map.h | 54 -- arch/arm/plat-orion/include/plat/common.h | 104 --- arch/arm/plat-orion/include/plat/time.h | 20 - arch/arm/plat-orion/pcie.c | 1 - arch/arm/plat-orion/time.c | 238 ----- drivers/ata/Kconfig | 3 +- drivers/mmc/host/Kconfig | 2 +- drivers/pci/controller/Kconfig | 2 +- drivers/phy/marvell/Kconfig | 2 +- drivers/rtc/Kconfig | 2 +- drivers/soc/Makefile | 1 - drivers/thermal/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- sound/soc/kirkwood/Kconfig | 2 +- 65 files changed, 14 insertions(+), 8888 deletions(-) delete mode 100644 arch/arm/configs/dove_defconfig delete mode 100644 arch/arm/configs/mv78xx0_defconfig delete mode 100644 arch/arm/mach-dove/Kconfig delete mode 100644 arch/arm/mach-dove/Makefile delete mode 100644 arch/arm/mach-dove/bridge-regs.h delete mode 100644 arch/arm/mach-dove/cm-a510.c delete mode 100644 arch/arm/mach-dove/common.c delete mode 100644 arch/arm/mach-dove/common.h delete mode 100644 arch/arm/mach-dove/dove.h delete mode 100644 arch/arm/mach-dove/irq.c delete mode 100644 arch/arm/mach-dove/irqs.h delete mode 100644 arch/arm/mach-dove/mpp.c delete mode 100644 arch/arm/mach-dove/mpp.h delete mode 100644 arch/arm/mach-dove/pcie.c delete mode 100644 arch/arm/mach-dove/pm.h delete mode 100644 arch/arm/mach-mv78xx0/Kconfig delete mode 100644 arch/arm/mach-mv78xx0/Makefile delete mode 100644 arch/arm/mach-mv78xx0/bridge-regs.h delete mode 100644 arch/arm/mach-mv78xx0/buffalo-wxl-setup.c delete mode 100644 arch/arm/mach-mv78xx0/common.c delete mode 100644 arch/arm/mach-mv78xx0/common.h delete mode 100644 arch/arm/mach-mv78xx0/irq.c delete mode 100644 arch/arm/mach-mv78xx0/irqs.h delete mode 100644 arch/arm/mach-mv78xx0/mpp.c delete mode 100644 arch/arm/mach-mv78xx0/mpp.h delete mode 100644 arch/arm/mach-mv78xx0/mv78xx0.h delete mode 100644 arch/arm/mach-mv78xx0/pcie.c delete mode 100644 arch/arm/mach-orion5x/dns323-setup.c delete mode 100644 arch/arm/mach-orion5x/kurobox_pro-setup.c delete mode 100644 arch/arm/mach-orion5x/mv2120-setup.c delete mode 100644 arch/arm/mach-orion5x/net2big-setup.c delete mode 100644 arch/arm/mach-orion5x/terastation_pro2-setup.c delete mode 100644 arch/arm/mach-orion5x/ts209-setup.c delete mode 100644 arch/arm/mach-orion5x/ts409-setup.c delete mode 100644 arch/arm/mach-orion5x/ts78xx-fpga.h delete mode 100644 arch/arm/mach-orion5x/ts78xx-setup.c delete mode 100644 arch/arm/mach-orion5x/tsx09-common.c delete mode 100644 arch/arm/mach-orion5x/tsx09-common.h delete mode 100644 arch/arm/plat-orion/common.c delete mode 100644 arch/arm/plat-orion/include/plat/addr-map.h delete mode 100644 arch/arm/plat-orion/include/plat/common.h delete mode 100644 arch/arm/plat-orion/include/plat/time.h delete mode 100644 arch/arm/plat-orion/time.c diff --git a/MAINTAINERS b/MAINTAINERS index 6e8fe7640064..028db7ad15ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3080,8 +3080,6 @@ F: Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml F: Documentation/devicetree/bindings/soc/dove/ F: arch/arm/boot/dts/marvell/dove* F: arch/arm/boot/dts/marvell/orion5x* -F: arch/arm/mach-dove/ -F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ F: drivers/bus/mvebu-mbus.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5770deca136d..da29afce309f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -393,8 +393,6 @@ source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-mstar/Kconfig" -source "arch/arm/mach-mv78xx0/Kconfig" - source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-mxs/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 56c090840c5a..e2fc89055463 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -583,7 +583,7 @@ choice config DEBUG_MVEBU_UART0_ALTERNATE bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" - depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X + depends on ARCH_MVEBU || ARCH_ORION5X select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f5bc9ad7f6f5..5421a3ec3825 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor -machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank @@ -190,7 +189,6 @@ machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp -machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MEDIATEK) += mediatek diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig deleted file mode 100644 index 917a864fec74..000000000000 --- a/arch/arm/configs/dove_defconfig +++ /dev/null @@ -1,134 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_DOVE=y -CONFIG_MACH_CM_A510=y -CONFIG_HIGHMEM=y -CONFIG_ATAGS=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_VFP=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=1 -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_ATA=y -CONFIG_SATA_MV=y -CONFIG_NETDEVICES=y -CONFIG_MV643XX_ETH=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_MOUSE_PS2 is not set -# CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -CONFIG_SPI=y -CONFIG_SPI_ORION=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_DOVE_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_ORION_WATCHDOG=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_DOVE=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MV=y -CONFIG_DMADEVICES=y -CONFIG_MV_XOR=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -# CONFIG_EXT4_FS_XATTR is not set -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_UTF8=y -CONFIG_TIMER_STATS=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_PRINTK_TIME=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig deleted file mode 100644 index e3cc8de7c1c2..000000000000 --- a/arch/arm/configs/mv78xx0_defconfig +++ /dev/null @@ -1,120 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_PROFILING=y -CONFIG_ARCH_MULTI_V5=y -# CONFIG_ARCH_MULTI_V6 is not set -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_MV78XX0=y -CONFIG_MACH_TERASTATION_WXL=y -CONFIG_HIGHMEM=y -CONFIG_ATAGS=y -CONFIG_VFP=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_ORION=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ATA=y -CONFIG_SATA_MV=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_NET_PCI=y -CONFIG_MV643XX_ETH=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_MARVELL_PHY=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_RS5C372=y -CONFIG_RTC_DRV_M41T80=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -# CONFIG_EXT4_FS_XATTR is not set -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SLUB_DEBUG is not set -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig deleted file mode 100644 index f547120e223e..000000000000 --- a/arch/arm/mach-dove/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menuconfig ARCH_DOVE - bool "Marvell Dove (DEPRECATED)" if ARCH_MULTI_V7 - depends on ATAGS - select CPU_PJ4 - select GPIOLIB - select MVEBU_MBUS - select PINCTRL - select PINCTRL_DOVE - select PLAT_ORION_LEGACY - select PM_GENERIC_DOMAINS if PM - select PCI_QUIRKS if PCI - help - Support for the Marvell Dove SoC 88AP510 using board files. - - Support for this machine will be removed in early 2027, unless - there is a strong reason to keep it. Users should migrate to - the devicetree-enabled version (CONFIG_MACH_DOVE) instead. - -if ARCH_DOVE - -config DOVE_LEGACY - bool - -config MACH_CM_A510 - bool "CompuLab CM-A510 Board" - select DOVE_LEGACY - help - Say 'Y' here if you want your kernel to support the - CompuLab CM-A510 Board. - -endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile deleted file mode 100644 index 0d31390be069..000000000000 --- a/arch/arm/mach-dove/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -ccflags-y := -I$(srctree)/arch/arm/plat-orion/include - -obj-y += common.o -obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o -obj-$(CONFIG_PCI) += pcie.o -obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/bridge-regs.h b/arch/arm/mach-dove/bridge-regs.h deleted file mode 100644 index 6fbc152d0950..000000000000 --- a/arch/arm/mach-dove/bridge-regs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* Mbus-L to Mbus Bridge Registers */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include "dove.h" - -#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) - -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) -#define CPU_CTRL_PCIE0_LINK 0x00000001 -#define CPU_RESET 0x00000002 -#define CPU_CTRL_PCIE1_LINK 0x00000008 - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) -#define BRIDGE_INT_TIMER1_CLR (~0x0004) - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define FIQ_MASK_LOW_OFF 0x0008 -#define ENDPOINT_MASK_LOW_OFF 0x000c -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define FIQ_MASK_HIGH_OFF 0x0018 -#define ENDPOINT_MASK_HIGH_OFF 0x001c -#define PCIE_INTERRUPT_MASK_OFF 0x0020 - -#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF) -#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF) -#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF) -#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF) -#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF) -#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) -#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) - -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) - -#endif diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c deleted file mode 100644 index beb532537c22..000000000000 --- a/arch/arm/mach-dove/cm-a510.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-dove/cm-a510.c - * - * Copyright (C) 2010 CompuLab, Ltd. - * Konstantin Sinyuk <kostyas@compulab.co.il> - * - * Based on Marvell DB-MV88AP510-BP Development Board Setup - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "dove.h" -#include "common.h" - -static struct mv643xx_eth_platform_data cm_a510_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, -}; - -static struct mv_sata_platform_data cm_a510_sata_data = { - .n_ports = 1, -}; - -/* - * SPI Devices: - * SPI0: 1M Flash Winbond w25q32bv - */ -static const struct flash_platform_data cm_a510_spi_flash_data = { - .type = "w25q32bv", -}; - -static struct spi_board_info __initdata cm_a510_spi_flash_info[] = { - { - .modalias = "m25p80", - .platform_data = &cm_a510_spi_flash_data, - .irq = -1, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static int __init cm_a510_pci_init(void) -{ - if (machine_is_cm_a510()) - dove_pcie_init(1, 1); - - return 0; -} - -subsys_initcall(cm_a510_pci_init); - -/* Board Init */ -static void __init cm_a510_init(void) -{ - /* - * Basic Dove setup. Needs to be called early. - */ - dove_init(); - - dove_ge00_init(&cm_a510_ge00_data); - dove_ehci0_init(); - dove_ehci1_init(); - dove_sata_init(&cm_a510_sata_data); - dove_sdio0_init(); - dove_sdio1_init(); - dove_spi0_init(); - dove_spi1_init(); - dove_uart0_init(); - dove_uart1_init(); - dove_i2c_init(); - spi_register_board_info(cm_a510_spi_flash_info, - ARRAY_SIZE(cm_a510_spi_flash_info)); -} - -MACHINE_START(CM_A510, "Compulab CM-A510 Board") - .atag_offset = 0x100, - .nr_irqs = DOVE_NR_IRQS, - .init_machine = cm_a510_init, - .map_io = dove_map_io, - .init_early = dove_init_early, - .init_irq = dove_init_irq, - .init_time = dove_timer_init, - .restart = dove_restart, -MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c deleted file mode 100644 index 35e978514591..000000000000 --- a/arch/arm/mach-dove/common.c +++ /dev/null @@ -1,449 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-dove/common.c - * - * Core functions for Marvell Dove 88AP510 System On Chip - */ - -#include <linux/clk-provider.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/platform_data/dma-mv_xor.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <linux/platform_device.h> -#include <linux/soc/dove/pmu.h> -#include <asm/hardware/cache-tauros2.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <plat/common.h> -#include <plat/irq.h> -#include <plat/time.h> -#include "bridge-regs.h" -#include "pm.h" -#include "common.h" - -/* These can go away once Dove uses the mvebu-mbus DT binding */ -#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4 -#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8 -#define DOVE_MBUS_PCIE0_IO_TARGET 0x4 -#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0 -#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8 -#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8 -#define DOVE_MBUS_PCIE1_IO_TARGET 0x8 -#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0 -#define DOVE_MBUS_CESA_TARGET 0x3 -#define DOVE_MBUS_CESA_ATTR 0x1 -#define DOVE_MBUS_BOOTROM_TARGET 0x1 -#define DOVE_MBUS_BOOTROM_ATTR 0xfd -#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd -#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0 - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc __maybe_unused dove_io_desc[] __initdata = { - { - .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), - .length = DOVE_SB_REGS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), - .length = DOVE_NB_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init dove_map_io(void) -{ - iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc)); -} - -/***************************************************************************** - * CLK tree - ****************************************************************************/ -static int dove_tclk; - -static DEFINE_SPINLOCK(gating_lock); -static struct clk *tclk; - -static struct clk __init *dove_register_gate(const char *name, - const char *parent, u8 bit_idx) -{ - return clk_register_gate(NULL, name, parent, 0, - (void __iomem *)CLOCK_GATING_CONTROL, - bit_idx, 0, &gating_lock); -} - -static void __init dove_clk_init(void) -{ - struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; - struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; - struct clk *xor0, *xor1, *ge; - - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk); - - usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); - usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); - sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); - pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); - pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); - sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); - sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); - nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); - camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); - i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); - i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); - crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); - ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); - pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); - xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); - xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); - dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); - ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); - - orion_clkdev_add(NULL, "orion_spi.0", tclk); - orion_clkdev_add(NULL, "orion_spi.1", tclk); - orion_clkdev_add(NULL, "orion_wdt", tclk); - orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); - - orion_clkdev_add(NULL, "orion-ehci.0", usb0); - orion_clkdev_add(NULL, "orion-ehci.1", usb1); - orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge); - orion_clkdev_add(NULL, "sata_mv.0", sata); - orion_clkdev_add("0", "pcie", pex0); - orion_clkdev_add("1", "pcie", pex1); - orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); - orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); - orion_clkdev_add(NULL, "orion_nand", nand); - orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); - orion_clkdev_add(NULL, "mvebu-audio.0", i2s0); - orion_clkdev_add(NULL, "mvebu-audio.1", i2s1); - orion_clkdev_add(NULL, "mv_crypto", crypto); - orion_clkdev_add(NULL, "dove-ac97", ac97); - orion_clkdev_add(NULL, "dove-pdma", pdma); - orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0); - orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); -} - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -void __init dove_ehci0_init(void) -{ - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); -} - -/***************************************************************************** - * EHCI1 - ****************************************************************************/ -void __init dove_ehci1_init(void) -{ - orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); -} - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, - 1600); -} - -/***************************************************************************** - * SoC RTC - ****************************************************************************/ -static void __init dove_rtc_init(void) -{ - orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC); -} - -/***************************************************************************** - * SATA - ****************************************************************************/ -void __init dove_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); - -} - -/***************************************************************************** - * UART0 - ****************************************************************************/ -void __init dove_uart0_init(void) -{ - orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE, - IRQ_DOVE_UART_0, tclk); -} - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init dove_uart1_init(void) -{ - orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE, - IRQ_DOVE_UART_1, tclk); -} - -/***************************************************************************** - * UART2 - ****************************************************************************/ -void __init dove_uart2_init(void) -{ - orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE, - IRQ_DOVE_UART_2, tclk); -} - -/***************************************************************************** - * UART3 - ****************************************************************************/ -void __init dove_uart3_init(void) -{ - orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE, - IRQ_DOVE_UART_3, tclk); -} - -/***************************************************************************** - * SPI - ****************************************************************************/ -void __init dove_spi0_init(void) -{ - orion_spi_init(DOVE_SPI0_PHYS_BASE); -} - -void __init dove_spi1_init(void) -{ - orion_spi_1_init(DOVE_SPI1_PHYS_BASE); -} - -/***************************************************************************** - * I2C - ****************************************************************************/ -void __init dove_i2c_init(void) -{ - orion_i2c_init(DOVE_I2C_PHYS_BASE, IRQ_DOVE_I2C, 10); -} - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init dove_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); - mvebu_mbus_init("marvell,dove-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); -} - -static int __init dove_find_tclk(void) -{ - return 166666667; -} - -void __init dove_timer_init(void) -{ - dove_tclk = dove_find_tclk(); - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_DOVE_BRIDGE, dove_tclk); -} - -/***************************************************************************** - * XOR 0 - ****************************************************************************/ -static void __init dove_xor0_init(void) -{ - orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, - IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01); -} - -/***************************************************************************** - * XOR 1 - ****************************************************************************/ -static void __init dove_xor1_init(void) -{ - orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE, - IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11); -} - -/***************************************************************************** - * SDIO - ****************************************************************************/ -static u64 sdio_dmamask = DMA_BIT_MASK(32); - -static struct resource dove_sdio0_resources[] = { - { - .start = DOVE_SDIO0_PHYS_BASE, - .end = DOVE_SDIO0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_SDIO0, - .end = IRQ_DOVE_SDIO0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_sdio0 = { - .name = "sdhci-dove", - .id = 0, - .dev = { - .dma_mask = &sdio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = dove_sdio0_resources, - .num_resources = ARRAY_SIZE(dove_sdio0_resources), -}; - -void __init dove_sdio0_init(void) -{ - platform_device_register(&dove_sdio0); -} - -static struct resource dove_sdio1_resources[] = { - { - .start = DOVE_SDIO1_PHYS_BASE, - .end = DOVE_SDIO1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_DOVE_SDIO1, - .end = IRQ_DOVE_SDIO1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dove_sdio1 = { - .name = "sdhci-dove", - .id = 1, - .dev = { - .dma_mask = &sdio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = dove_sdio1_resources, - .num_resources = ARRAY_SIZE(dove_sdio1_resources), -}; - -void __init dove_sdio1_init(void) -{ - platform_device_register(&dove_sdio1); -} - -void __init dove_setup_cpu_wins(void) -{ - /* - * The PCIe windows will no longer be statically allocated - * here once Dove is migrated to the pci-mvebu driver. The - * non-PCIe windows will no longer be created here once Dove - * fully moves to DT. - */ - mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET, - DOVE_MBUS_PCIE0_IO_ATTR, - DOVE_PCIE0_IO_PHYS_BASE, - DOVE_PCIE0_IO_SIZE, - DOVE_PCIE0_IO_BUS_BASE); - mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET, - DOVE_MBUS_PCIE1_IO_ATTR, - DOVE_PCIE1_IO_PHYS_BASE, - DOVE_PCIE1_IO_SIZE, - DOVE_PCIE1_IO_BUS_BASE); - mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET, - DOVE_MBUS_PCIE0_MEM_ATTR, - DOVE_PCIE0_MEM_PHYS_BASE, - DOVE_PCIE0_MEM_SIZE); - mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET, - DOVE_MBUS_PCIE1_MEM_ATTR, - DOVE_PCIE1_MEM_PHYS_BASE, - DOVE_PCIE1_MEM_SIZE); - mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET, - DOVE_MBUS_CESA_ATTR, - DOVE_CESA_PHYS_BASE, - DOVE_CESA_SIZE); - mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET, - DOVE_MBUS_BOOTROM_ATTR, - DOVE_BOOTROM_PHYS_BASE, - DOVE_BOOTROM_SIZE); - mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET, - DOVE_MBUS_SCRATCHPAD_ATTR, - DOVE_SCRATCHPAD_PHYS_BASE, - DOVE_SCRATCHPAD_SIZE); -} - -static struct resource orion_wdt_resource[] = { - DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), - DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), -}; - -static struct platform_device orion_wdt_device = { - .name = "orion_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(orion_wdt_resource), - .resource = orion_wdt_resource, -}; - -static void __init __maybe_unused orion_wdt_init(void) -{ - platform_device_register(&orion_wdt_device); -} - -static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = { - { - .pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK, - .rst_mask = PMU_SW_RST_VIDEO_MASK, - .iso_mask = PMU_ISO_VIDEO_MASK, - .name = "vpu-domain", - }, { - .pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK, - .rst_mask = PMU_SW_RST_GPU_MASK, - .iso_mask = PMU_ISO_GPU_MASK, - .name = "gpu-domain", - }, { - /* sentinel */ - }, -}; - -static const struct dove_pmu_initdata pmu_data __initconst = { - .pmc_base = DOVE_PMU_VIRT_BASE, - .pmu_base = DOVE_PMU_VIRT_BASE + 0x8000, - .irq = IRQ_DOVE_PMU, - .irq_domain_start = IRQ_DOVE_PMU_START, - .domains = pmu_domains, -}; - -void __init dove_init(void) -{ - pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", - (dove_tclk + 499999) / 1000000); - -#ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(0); -#endif - dove_setup_cpu_wins(); - - /* Setup root of clk tree */ - dove_clk_init(); - - /* internal devices that every board has */ - dove_init_pmu_legacy(&pmu_data); - dove_rtc_init(); - dove_xor0_init(); - dove_xor1_init(); -} - -void dove_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h deleted file mode 100644 index 57ebc413d68c..000000000000 --- a/arch/arm/mach-dove/common.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-dove/common.h - * - * Core functions for Marvell Dove 88AP510 System On Chip - */ - -#ifndef __ARCH_DOVE_COMMON_H -#define __ARCH_DOVE_COMMON_H - -#include <linux/reboot.h> - -struct mv643xx_eth_platform_data; -struct mv_sata_platform_data; - -extern void dove_timer_init(void); - -/* - * Basic Dove init functions used early by machine-setup. - */ -void dove_map_io(void); -void dove_init(void); -void dove_init_early(void); -void dove_init_irq(void); -void dove_setup_cpu_wins(void); -void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); -void dove_sata_init(struct mv_sata_platform_data *sata_data); -#ifdef CONFIG_PCI -void dove_pcie_init(int init_port0, int init_port1); -#else -static inline void dove_pcie_init(int init_port0, int init_port1) { } -#endif -void dove_ehci0_init(void); -void dove_ehci1_init(void); -void dove_uart0_init(void); -void dove_uart1_init(void); -void dove_uart2_init(void); -void dove_uart3_init(void); -void dove_spi0_init(void); -void dove_spi1_init(void); -void dove_i2c_init(void); -void dove_sdio0_init(void); -void dove_sdio1_init(void); -void dove_restart(enum reboot_mode, const char *); - -#endif diff --git a/arch/arm/mach-dove/dove.h b/arch/arm/mach-dove/dove.h deleted file mode 100644 index e5054e3b0b78..000000000000 --- a/arch/arm/mach-dove/dove.h +++ /dev/null @@ -1,185 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* Generic definitions for Marvell Dove 88AP510 SoC */ - -#ifndef __ASM_ARCH_DOVE_H -#define __ASM_ARCH_DOVE_H - -#include "irqs.h" - -/* - * Marvell Dove address maps. - * - * phys virt size - * c8000000 fdb00000 1M Cryptographic SRAM - * e0000000 @runtime 128M PCIe-0 Memory space - * e8000000 @runtime 128M PCIe-1 Memory space - * f1000000 fec00000 1M on-chip south-bridge registers - * f1800000 fe400000 8M on-chip north-bridge registers - * f2000000 fee00000 1M PCIe-0 I/O space - * f2100000 fef00000 1M PCIe-1 I/O space - */ - -#define DOVE_CESA_PHYS_BASE 0xc8000000 -#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) -#define DOVE_CESA_SIZE SZ_1M - -#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 -#define DOVE_PCIE0_MEM_SIZE SZ_128M - -#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define DOVE_PCIE1_MEM_SIZE SZ_128M - -#define DOVE_BOOTROM_PHYS_BASE 0xf8000000 -#define DOVE_BOOTROM_SIZE SZ_128M - -#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 -#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) -#define DOVE_SCRATCHPAD_SIZE SZ_1M - -#define DOVE_SB_REGS_PHYS_BASE 0xf1000000 -#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfec00000) -#define DOVE_SB_REGS_SIZE SZ_1M - -#define DOVE_NB_REGS_PHYS_BASE 0xf1800000 -#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe400000) -#define DOVE_NB_REGS_SIZE SZ_8M - -#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 -#define DOVE_PCIE0_IO_BUS_BASE 0x00000000 -#define DOVE_PCIE0_IO_SIZE SZ_64K - -#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 -#define DOVE_PCIE1_IO_BUS_BASE 0x00010000 -#define DOVE_PCIE1_IO_SIZE SZ_64K - -/* - * Dove Core Registers Map - */ - -/* SPI, I2C, UART */ -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) - -/* North-South Bridge */ -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) -#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) -#define BRIDGE_WINS_SZ (0x80) - -/* Cryptographic Engine */ -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) - -/* PCIe 0 */ -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) - -/* USB */ -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) - -/* XOR 0 Engine */ -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) - -/* XOR 1 Engine */ -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) - -/* Gigabit Ethernet */ -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) - -/* PCIe 1 */ -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) - -/* CAFE */ -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) - -/* SATA */ -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) - -/* I2S/SPDIF */ -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) - -/* NAND Flash Controller */ -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) - -/* MPP, GPIO, Reset Sampling */ -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) -#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) -#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) -#define DOVE_NAND_GPIO_EN (1 << 0) -#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) -#define DOVE_SPI_GPIO_SEL (1 << 5) -#define DOVE_UART1_GPIO_SEL (1 << 4) -#define DOVE_AU1_GPIO_SEL (1 << 3) -#define DOVE_CAM_GPIO_SEL (1 << 2) -#define DOVE_SD1_GPIO_SEL (1 << 1) -#define DOVE_SD0_GPIO_SEL (1 << 0) - -/* Power Management */ -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) -#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) - -/* Real Time Clock */ -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) - -/* AC97 */ -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) - -/* Peripheral DMA */ -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) - -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) -#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) -#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) -#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) -#define DOVE_TWSI_OPTION3_GPIO (1 << 22) -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) -#define DOVE_SSP_ON_AU1 (1 << 0) -#define DOVE_SSP_CLOCK_ENABLE (1 << 1) -#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) -/* Memory Controller */ -#define DOVE_MC_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x00000) -#define DOVE_MC_WINS_BASE (DOVE_MC_PHYS_BASE + 0x100) -#define DOVE_MC_WINS_SZ (0x8) -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) - -/* LCD Controller */ -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) - -/* Graphic Engine */ -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) - -/* Video Engine */ -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) - -#endif diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c deleted file mode 100644 index 027a8f87bc2e..000000000000 --- a/arch/arm/mach-dove/irq.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-dove/irq.c - * - * Dove IRQ handling. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/exception.h> - -#include <plat/irq.h> -#include <plat/orion-gpio.h> - -#include "pm.h" -#include "bridge-regs.h" -#include "common.h" - -static int __initdata gpio0_irqs[4] = { - IRQ_DOVE_GPIO_0_7, - IRQ_DOVE_GPIO_8_15, - IRQ_DOVE_GPIO_16_23, - IRQ_DOVE_GPIO_24_31, -}; - -static int __initdata gpio1_irqs[4] = { - IRQ_DOVE_HIGH_GPIO, - 0, - 0, - 0, -}; - -static int __initdata gpio2_irqs[4] = { - 0, - 0, - 0, - 0, -}; - -static void __iomem *dove_irq_base = IRQ_VIRT_BASE; - -static asmlinkage void -__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = 1 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 33 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} - -void __init dove_init_irq(void) -{ - orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); - - set_handle_irq(dove_legacy_handle_irq); - - /* - * Initialize gpiolib for GPIOs 0-71. - */ - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START, gpio0_irqs); - - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, - IRQ_DOVE_GPIO_START + 64, gpio2_irqs); -} diff --git a/arch/arm/mach-dove/irqs.h b/arch/arm/mach-dove/irqs.h deleted file mode 100644 index 5467098c7042..000000000000 --- a/arch/arm/mach-dove/irqs.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* IRQ definitions for Marvell Dove 88AP510 SoC */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* - * Dove Low Interrupt Controller - */ -#define IRQ_DOVE_BRIDGE (1 + 0) -#define IRQ_DOVE_H2C (1 + 1) -#define IRQ_DOVE_C2H (1 + 2) -#define IRQ_DOVE_NAND (1 + 3) -#define IRQ_DOVE_PDMA (1 + 4) -#define IRQ_DOVE_SPI1 (1 + 5) -#define IRQ_DOVE_SPI0 (1 + 6) -#define IRQ_DOVE_UART_0 (1 + 7) -#define IRQ_DOVE_UART_1 (1 + 8) -#define IRQ_DOVE_UART_2 (1 + 9) -#define IRQ_DOVE_UART_3 (1 + 10) -#define IRQ_DOVE_I2C (1 + 11) -#define IRQ_DOVE_GPIO_0_7 (1 + 12) -#define IRQ_DOVE_GPIO_8_15 (1 + 13) -#define IRQ_DOVE_GPIO_16_23 (1 + 14) -#define IRQ_DOVE_PCIE0_ERR (1 + 15) -#define IRQ_DOVE_PCIE0 (1 + 16) -#define IRQ_DOVE_PCIE1_ERR (1 + 17) -#define IRQ_DOVE_PCIE1 (1 + 18) -#define IRQ_DOVE_I2S0 (1 + 19) -#define IRQ_DOVE_I2S0_ERR (1 + 20) -#define IRQ_DOVE_I2S1 (1 + 21) -#define IRQ_DOVE_I2S1_ERR (1 + 22) -#define IRQ_DOVE_USB_ERR (1 + 23) -#define IRQ_DOVE_USB0 (1 + 24) -#define IRQ_DOVE_USB1 (1 + 25) -#define IRQ_DOVE_GE00_RX (1 + 26) -#define IRQ_DOVE_GE00_TX (1 + 27) -#define IRQ_DOVE_GE00_MISC (1 + 28) -#define IRQ_DOVE_GE00_SUM (1 + 29) -#define IRQ_DOVE_GE00_ERR (1 + 30) -#define IRQ_DOVE_CRYPTO (1 + 31) - -/* - * Dove High Interrupt Controller - */ -#define IRQ_DOVE_AC97 (1 + 32) -#define IRQ_DOVE_PMU (1 + 33) -#define IRQ_DOVE_CAM (1 + 34) -#define IRQ_DOVE_SDIO0 (1 + 35) -#define IRQ_DOVE_SDIO1 (1 + 36) -#define IRQ_DOVE_SDIO0_WAKEUP (1 + 37) -#define IRQ_DOVE_SDIO1_WAKEUP (1 + 38) -#define IRQ_DOVE_XOR_00 (1 + 39) -#define IRQ_DOVE_XOR_01 (1 + 40) -#define IRQ_DOVE_XOR0_ERR (1 + 41) -#define IRQ_DOVE_XOR_10 (1 + 42) -#define IRQ_DOVE_XOR_11 (1 + 43) -#define IRQ_DOVE_XOR1_ERR (1 + 44) -#define IRQ_DOVE_LCD_DCON (1 + 45) -#define IRQ_DOVE_LCD1 (1 + 46) -#define IRQ_DOVE_LCD0 (1 + 47) -#define IRQ_DOVE_GPU (1 + 48) -#define IRQ_DOVE_PERFORM_MNTR (1 + 49) -#define IRQ_DOVE_VPRO_DMA1 (1 + 51) -#define IRQ_DOVE_SSP_TIMER (1 + 54) -#define IRQ_DOVE_SSP (1 + 55) -#define IRQ_DOVE_MC_L2_ERR (1 + 56) -#define IRQ_DOVE_CRYPTO_ERR (1 + 59) -#define IRQ_DOVE_GPIO_24_31 (1 + 60) -#define IRQ_DOVE_HIGH_GPIO (1 + 61) -#define IRQ_DOVE_SATA (1 + 62) - -/* - * DOVE General Purpose Pins - */ -#define IRQ_DOVE_GPIO_START 65 -#define NR_GPIO_IRQS 64 - -/* - * PMU interrupts - */ -#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS) -#define NR_PMU_IRQS 7 -#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5) - -#define DOVE_NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) - - -#endif diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c deleted file mode 100644 index e41bd473abe9..000000000000 --- a/arch/arm/mach-dove/mpp.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-dove/mpp.c - * - * MPP functions for Marvell Dove SoCs - */ - -#include <linux/kernel.h> -#include <linux/gpio/consumer.h> -#include <linux/io.h> -#include <plat/mpp.h> -#include <plat/orion-gpio.h> -#include "dove.h" -#include "mpp.h" - -struct dove_mpp_grp { - int start; - int end; -}; - -/* Map a group to a range of GPIO pins in that group */ -static const struct dove_mpp_grp dove_mpp_grp[] = { - [MPP_24_39] = { - .start = 24, - .end = 39, - }, - [MPP_40_45] = { - .start = 40, - .end = 45, - }, - [MPP_46_51] = { - .start = 46, - .end = 51, - }, - [MPP_58_61] = { - .start = 58, - .end = 61, - }, - [MPP_62_63] = { - .start = 62, - .end = 63, - }, -}; - -/* Enable gpio for a range of pins. mode should be a combination of - GPIO_OUTPUT_OK | GPIO_INPUT_OK */ -static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode) -{ - int i; - - for (i = start; i <= end; i++) - orion_gpio_set_valid(i, gpio_mode); -} - -/* Dump all the extra MPP registers. The platform code will dump the - registers for pins 0-23. */ -static void __init dove_mpp_dump_regs(void) -{ - pr_debug("PMU_CTRL4_CTRL: %08x\n", - readl(DOVE_MPP_CTRL4_VIRT_BASE)); - - pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", - readl(DOVE_PMU_MPP_GENERAL_CTRL)); - - pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE)); -} - -static void __init dove_mpp_cfg_nfc(int sel) -{ - u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE); - - mpp_gen_cfg &= ~0x1; - mpp_gen_cfg |= sel; - writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE); - - dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK); -} - -static void __init dove_mpp_cfg_au1(int sel) -{ - u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); - u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1); - u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE); - u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2); - - mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL); - ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1); - mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN); - global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO); - - if (!sel || sel == 0x2) - dove_mpp_gpio_mode(52, 57, 0); - else - dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); - - if (sel & 0x1) { - global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO; - dove_mpp_gpio_mode(56, 57, 0); - } - if (sel & 0x2) { - mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN; - dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); - } - if (sel & 0x4) { - ssp_ctrl1 |= DOVE_SSP_ON_AU1; - dove_mpp_gpio_mode(52, 55, 0); - } - if (sel & 0x8) - mpp_ctrl4 |= DOVE_AU1_GPIO_SEL; - - writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); - writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1); - writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE); - writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2); -} - -/* Configure the group registers, enabling GPIO if sel indicates the - pin is to be used for GPIO */ -static void __init dove_mpp_conf_grp(unsigned int *mpp_grp_list) -{ - u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); - int gpio_mode; - - for ( ; *mpp_grp_list; mpp_grp_list++) { - unsigned int num = MPP_NUM(*mpp_grp_list); - unsigned int sel = MPP_SEL(*mpp_grp_list); - - if (num > MPP_GRP_MAX) { - pr_err("dove: invalid MPP GRP number (%u)\n", num); - continue; - } - - mpp_ctrl4 &= ~(0x1 << num); - mpp_ctrl4 |= sel << num; - - gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0; - dove_mpp_gpio_mode(dove_mpp_grp[num].start, - dove_mpp_grp[num].end, gpio_mode); - } - writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); -} - -/* Configure the various MPP pins on Dove */ -void __init dove_mpp_conf(unsigned int *mpp_list, - unsigned int *mpp_grp_list, - unsigned int grp_au1_52_57, - unsigned int grp_nfc_64_71) -{ - dove_mpp_dump_regs(); - - /* Use platform code for pins 0-23 */ - orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE); - - dove_mpp_conf_grp(mpp_grp_list); - dove_mpp_cfg_au1(grp_au1_52_57); - dove_mpp_cfg_nfc(grp_nfc_64_71); - - dove_mpp_dump_regs(); -} diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h deleted file mode 100644 index 2e4b89c86ca8..000000000000 --- a/arch/arm/mach-dove/mpp.h +++ /dev/null @@ -1,197 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ARCH_DOVE_MPP_CODED_H -#define __ARCH_DOVE_MPP_CODED_H - -#define MPP(_num, _sel, _in, _out) ( \ - /* MPP number */ ((_num) & 0xff) | \ - /* MPP select value */ (((_sel) & 0xf) << 8) | \ - /* may be input signal */ ((!!(_in)) << 12) | \ - /* may be output signal */ ((!!(_out)) << 13)) - -#define MPP0_GPIO0 MPP(0, 0x0, 1, 1) -#define MPP0_UA2_RTSn MPP(0, 0x2, 0, 0) -#define MPP0_SDIO0_CD MPP(0, 0x3, 0, 0) -#define MPP0_LCD0_PWM MPP(0, 0xf, 0, 0) - -#define MPP1_GPIO1 MPP(1, 0x0, 1, 1) -#define MPP1_UA2_CTSn MPP(1, 0x2, 0, 0) -#define MPP1_SDIO0_WP MPP(1, 0x3, 0, 0) -#define MPP1_LCD1_PWM MPP(1, 0xf, 0, 0) - -#define MPP2_GPIO2 MPP(2, 0x0, 1, 1) -#define MPP2_SATA_PRESENT MPP(2, 0x1, 0, 0) -#define MPP2_UA2_TXD MPP(2, 0x2, 0, 0) -#define MPP2_SDIO0_BUS_POWER MPP(2, 0x3, 0, 0) -#define MPP2_UA_RTSn1 MPP(2, 0x4, 0, 0) - -#define MPP3_GPIO3 MPP(3, 0x0, 1, 1) -#define MPP3_SATA_ACT MPP(3, 0x1, 0, 0) -#define MPP3_UA2_RXD MPP(3, 0x2, 0, 0) -#define MPP3_SDIO0_LED_CTRL MPP(3, 0x3, 0, 0) -#define MPP3_UA_CTSn1 MPP(3, 0x4, 0, 0) -#define MPP3_SPI_LCD_CS1 MPP(3, 0xf, 0, 0) - -#define MPP4_GPIO4 MPP(4, 0x0, 1, 1) -#define MPP4_UA3_RTSn MPP(4, 0x2, 0, 0) -#define MPP4_SDIO1_CD MPP(4, 0x3, 0, 0) -#define MPP4_SPI_1_MISO MPP(4, 0x4, 0, 0) - -#define MPP5_GPIO5 MPP(5, 0x0, 1, 1) -#define MPP5_UA3_CTSn MPP(5, 0x2, 0, 0) -#define MPP5_SDIO1_WP MPP(5, 0x3, 0, 0) -#define MPP5_SPI_1_CS MPP(5, 0x4, 0, 0) - -#define MPP6_GPIO6 MPP(6, 0x0, 1, 1) -#define MPP6_UA3_TXD MPP(6, 0x2, 0, 0) -#define MPP6_SDIO1_BUS_POWER MPP(6, 0x3, 0, 0) -#define MPP6_SPI_1_MOSI MPP(6, 0x4, 0, 0) - -#define MPP7_GPIO7 MPP(7, 0x0, 1, 1) -#define MPP7_UA3_RXD MPP(7, 0x2, 0, 0) -#define MPP7_SDIO1_LED_CTRL MPP(7, 0x3, 0, 0) -#define MPP7_SPI_1_SCK MPP(7, 0x4, 0, 0) - -#define MPP8_GPIO8 MPP(8, 0x0, 1, 1) -#define MPP8_WD_RST_OUT MPP(8, 0x1, 0, 0) - -#define MPP9_GPIO9 MPP(9, 0x0, 1, 1) -#define MPP9_PEX1_CLKREQn MPP(9, 0x5, 0, 0) - -#define MPP10_GPIO10 MPP(10, 0x0, 1, 1) -#define MPP10_SSP_SCLK MPP(10, 0x5, 0, 0) - -#define MPP11_GPIO11 MPP(11, 0x0, 1, 1) -#define MPP11_SATA_PRESENT MPP(11, 0x1, 0, 0) -#define MPP11_SATA_ACT MPP(11, 0x2, 0, 0) -#define MPP11_SDIO0_LED_CTRL MPP(11, 0x3, 0, 0) -#define MPP11_SDIO1_LED_CTRL MPP(11, 0x4, 0, 0) -#define MPP11_PEX0_CLKREQn MPP(11, 0x5, 0, 0) - -#define MPP12_GPIO12 MPP(12, 0x0, 1, 1) -#define MPP12_SATA_ACT MPP(12, 0x1, 0, 0) -#define MPP12_UA2_RTSn MPP(12, 0x2, 0, 0) -#define MPP12_AD0_I2S_EXT_MCLK MPP(12, 0x3, 0, 0) -#define MPP12_SDIO1_CD MPP(12, 0x4, 0, 0) - -#define MPP13_GPIO13 MPP(13, 0x0, 1, 1) -#define MPP13_UA2_CTSn MPP(13, 0x2, 0, 0) -#define MPP13_AD1_I2S_EXT_MCLK MPP(13, 0x3, 0, 0) -#define MPP13_SDIO1WP MPP(13, 0x4, 0, 0) -#define MPP13_SSP_EXTCLK MPP(13, 0x5, 0, 0) - -#define MPP14_GPIO14 MPP(14, 0x0, 1, 1) -#define MPP14_UA2_TXD MPP(14, 0x2, 0, 0) -#define MPP14_SDIO1_BUS_POWER MPP(14, 0x4, 0, 0) -#define MPP14_SSP_RXD MPP(14, 0x5, 0, 0) - -#define MPP15_GPIO15 MPP(15, 0x0, 1, 1) -#define MPP15_UA2_RXD MPP(15, 0x2, 0, 0) -#define MPP15_SDIO1_LED_CTRL MPP(15, 0x4, 0, 0) -#define MPP15_SSP_SFRM MPP(15, 0x5, 0, 0) - -#define MPP16_GPIO16 MPP(16, 0x0, 1, 1) -#define MPP16_UA3_RTSn MPP(16, 0x2, 0, 0) -#define MPP16_SDIO0_CD MPP(16, 0x3, 0, 0) -#define MPP16_SPI_LCD_CS1 MPP(16, 0x4, 0, 0) -#define MPP16_AC97_SDATA_IN1 MPP(16, 0x5, 0, 0) - -#define MPP17_GPIO17 MPP(17, 0x0, 1, 1) -#define MPP17_AC97_SYSCLK_OUT MPP(17, 0x1, 0, 0) -#define MPP17_UA3_CTSn MPP(17, 0x2, 0, 0) -#define MPP17_SDIO0_WP MPP(17, 0x3, 0, 0) -#define MPP17_TW_SDA2 MPP(17, 0x4, 0, 0) -#define MPP17_AC97_SDATA_IN2 MPP(17, 0x5, 0, 0) - -#define MPP18_GPIO18 MPP(18, 0x0, 1, 1) -#define MPP18_UA3_TXD MPP(18, 0x2, 0, 0) -#define MPP18_SDIO0_BUS_POWER MPP(18, 0x3, 0, 0) -#define MPP18_LCD0_PWM MPP(18, 0x4, 0, 0) -#define MPP18_AC_SDATA_IN3 MPP(18, 0x5, 0, 0) - -#define MPP19_GPIO19 MPP(19, 0x0, 1, 1) -#define MPP19_UA3_RXD MPP(19, 0x2, 0, 0) -#define MPP19_SDIO0_LED_CTRL MPP(19, 0x3, 0, 0) -#define MPP19_TW_SCK2 MPP(19, 0x4, 0, 0) - -#define MPP20_GPIO20 MPP(20, 0x0, 1, 1) -#define MPP20_AC97_SYSCLK_OUT MPP(20, 0x1, 0, 0) -#define MPP20_SPI_LCD_MISO MPP(20, 0x2, 0, 0) -#define MPP20_SDIO1_CD MPP(20, 0x3, 0, 0) -#define MPP20_SDIO0_CD MPP(20, 0x5, 0, 0) -#define MPP20_SPI_1_MISO MPP(20, 0x6, 0, 0) - -#define MPP21_GPIO21 MPP(21, 0x0, 1, 1) -#define MPP21_UA1_RTSn MPP(21, 0x1, 0, 0) -#define MPP21_SPI_LCD_CS0 MPP(21, 0x2, 0, 0) -#define MPP21_SDIO1_WP MPP(21, 0x3, 0, 0) -#define MPP21_SSP_SFRM MPP(21, 0x4, 0, 0) -#define MPP21_SDIO0_WP MPP(21, 0x5, 0, 0) -#define MPP21_SPI_1_CS MPP(21, 0x6, 0, 0) - -#define MPP22_GPIO22 MPP(22, 0x0, 1, 1) -#define MPP22_UA1_CTSn MPP(22, 0x1, 0, 0) -#define MPP22_SPI_LCD_MOSI MPP(22, 0x2, 0, 0) -#define MPP22_SDIO1_BUS_POWER MPP(22, 0x3, 0, 0) -#define MPP22_SSP_TXD MPP(22, 0x4, 0, 0) -#define MPP22_SDIO0_BUS_POWER MPP(22, 0x5, 0, 0) -#define MPP22_SPI_1_MOSI MPP(22, 0x6, 0, 0) - -#define MPP23_GPIO23 MPP(23, 0x0, 1, 1) -#define MPP23_SPI_LCD_SCK MPP(23, 0x2, 0, 0) -#define MPP23_SDIO1_LED_CTRL MPP(23, 0x3, 0, 0) -#define MPP23_SSP_SCLK MPP(23, 0x4, 0, 0) -#define MPP23_SDIO0_LED_CTRL MPP(23, 0x5, 0, 0) -#define MPP23_SPI_1_SCK MPP(23, 0x6, 0, 0) - -#define MPP_MAX 23 - -#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 0) - -/* for MPP groups _num is a group index */ -enum dove_mpp_grp_idx { - MPP_24_39 = 2, - MPP_40_45 = 0, - MPP_46_51 = 1, - MPP_58_61 = 5, - MPP_62_63 = 4, - MPP_GRP_MAX = 5, -}; - -#define MPP_GRP_24_39_GPIO MPP_GRP(MPP_24_39, 0x1) -#define MPP_GRP_24_39_CAM MPP_GRP(MPP_24_39, 0x0) - -#define MPP_GRP_40_45_GPIO MPP_GRP(MPP_40_45, 0x1) -#define MPP_GRP_40_45_SD0 MPP_GRP(MPP_40_45, 0x0) - -#define MPP_GRP_46_51_GPIO MPP_GRP(MPP_46_51, 0x1) -#define MPP_GRP_46_51_SD1 MPP_GRP(MPP_46_51, 0x0) - -#define MPP_GRP_58_61_GPIO MPP_GRP(MPP_58_61, 0x1) -#define MPP_GRP_58_61_SPI MPP_GRP(MPP_58_61, 0x0) - -#define MPP_GRP_62_63_GPIO MPP_GRP(MPP_62_63, 0x1) -#define MPP_GRP_62_63_UA1 MPP_GRP(MPP_62_63, 0x0) - -/* The MPP[64:71] control differs from other groups */ -#define MPP_GRP_NFC_64_71_GPO 0x1 -#define MPP_GRP_NFC_64_71_NFC 0x0 - -/* - * The MPP[52:57] functionality is encoded by 4 bits in different - * registers. The _num field in this case encodes those bits in - * correspodence with Table 135 of 88AP510 Functional specification - */ -#define MPP_GRP_AU1_52_57_AU1 0x0 -#define MPP_GRP_AU1_52_57_AU1_GPIO57 0x2 -#define MPP_GRP_AU1_52_57_GPIO 0xa -#define MPP_GRP_AU1_52_57_TW_GPIO 0xb -#define MPP_GRP_AU1_52_57_AU1_SSP 0xc -#define MPP_GRP_AU1_52_57_SSP_GPIO 0xe -#define MPP_GRP_AU1_52_57_SSP_TW 0xf - -void dove_mpp_conf(unsigned int *mpp_list, - unsigned int *mpp_grp_list, - unsigned int grp_au1_52_57, - unsigned int grp_nfc_64_71); - -#endif /* __ARCH_DOVE_MPP_CODED_H */ diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c deleted file mode 100644 index 3044b7e03890..000000000000 --- a/arch/arm/mach-dove/pcie.c +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-dove/pcie.c - * - * PCIe functions for Marvell Dove 88AP510 SoC - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/clk.h> -#include <video/vga.h> -#include <asm/mach/pci.h> -#include <asm/mach/arch.h> -#include <asm/setup.h> -#include <asm/delay.h> -#include <plat/pcie.h> -#include <plat/addr-map.h> -#include "irqs.h" -#include "bridge-regs.h" -#include "common.h" - -struct pcie_port { - u8 index; - u8 root_bus_nr; - void __iomem *base; - spinlock_t conf_lock; - char mem_space_name[16]; - struct resource res; -}; - -static struct pcie_port pcie_port[2]; -static int num_pcie_ports; - - -static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct pcie_port *pp; - struct resource realio; - - if (nr >= num_pcie_ports) - return 0; - - pp = &pcie_port[nr]; - sys->private_data = pp; - pp->root_bus_nr = sys->busnr; - - /* - * Generic PCIe unit setup. - */ - orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - - orion_pcie_setup(pp->base); - - realio.start = sys->busnr * SZ_64K; - realio.end = realio.start + SZ_64K - 1; - pci_remap_iospace(&realio, pp->index == 0 ? DOVE_PCIE0_IO_PHYS_BASE : - DOVE_PCIE1_IO_PHYS_BASE); - - /* - * IORESOURCE_MEM - */ - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), - "PCIe %d MEM", pp->index); - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res.name = pp->mem_space_name; - if (pp->index == 0) { - pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE; - pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1; - } else { - pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE; - pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1; - } - pp->res.flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res)) - panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); - - return 1; -} - -static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) -{ - /* - * Don't go out when trying to access nonexisting devices - * on the local bus. - */ - if (bus == pp->root_bus_nr && dev > 1) - return 0; - - return 1; -} - -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static struct pci_ops pcie_ops = { - .read = pcie_rd_conf, - .write = pcie_wr_conf, -}; - -/* - * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it - * is operating as a root complex this needs to be switched to - * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on - * the device. Decoding setup is handled by the orion code. - */ -static void rc_pci_fixup(struct pci_dev *dev) -{ - if (dev->bus->parent == NULL && dev->devfn == 0) { - struct resource *r; - - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - pci_dev_for_each_resource(dev, r) { - r->start = 0; - r->end = 0; - r->flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); - -static int __init -dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge) -{ - struct pci_sys_data *sys = pci_host_bridge_priv(bridge); - - if (nr >= num_pcie_ports) { - BUG(); - return -EINVAL; - } - - list_splice_init(&sys->resources, &bridge->windows); - bridge->dev.parent = NULL; - bridge->sysdata = sys; - bridge->busnr = sys->busnr; - bridge->ops = &pcie_ops; - - return pci_scan_root_bus_bridge(bridge); -} - -static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - struct pci_sys_data *sys = dev->sysdata; - struct pcie_port *pp = sys->private_data; - - return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0; -} - -static struct hw_pci dove_pci __initdata = { - .nr_controllers = 2, - .setup = dove_pcie_setup, - .scan = dove_pcie_scan_bus, - .map_irq = dove_pcie_map_irq, -}; - -static void __init add_pcie_port(int index, void __iomem *base) -{ - printk(KERN_INFO "Dove PCIe port %d: ", index); - - if (orion_pcie_link_up(base)) { - struct pcie_port *pp = &pcie_port[num_pcie_ports++]; - struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0")); - - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - printk(KERN_INFO "link up\n"); - - pp->index = index; - pp->root_bus_nr = -1; - pp->base = base; - spin_lock_init(&pp->conf_lock); - memset(&pp->res, 0, sizeof(pp->res)); - } else { - printk(KERN_INFO "link down, ignoring\n"); - } -} - -void __init dove_pcie_init(int init_port0, int init_port1) -{ - vga_base = DOVE_PCIE0_MEM_PHYS_BASE; - - if (init_port0) - add_pcie_port(0, DOVE_PCIE0_VIRT_BASE); - - if (init_port1) - add_pcie_port(1, DOVE_PCIE1_VIRT_BASE); - - pci_common_init(&dove_pci); -} diff --git a/arch/arm/mach-dove/pm.h b/arch/arm/mach-dove/pm.h deleted file mode 100644 index a4c3aba1e2d0..000000000000 --- a/arch/arm/mach-dove/pm.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef __ASM_ARCH_PM_H -#define __ASM_ARCH_PM_H - -#include <asm/errno.h> -#include "irqs.h" - -#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) -#define CLOCK_GATING_BIT_USB0 0 -#define CLOCK_GATING_BIT_USB1 1 -#define CLOCK_GATING_BIT_GBE 2 -#define CLOCK_GATING_BIT_SATA 3 -#define CLOCK_GATING_BIT_PCIE0 4 -#define CLOCK_GATING_BIT_PCIE1 5 -#define CLOCK_GATING_BIT_SDIO0 8 -#define CLOCK_GATING_BIT_SDIO1 9 -#define CLOCK_GATING_BIT_NAND 10 -#define CLOCK_GATING_BIT_CAMERA 11 -#define CLOCK_GATING_BIT_I2S0 12 -#define CLOCK_GATING_BIT_I2S1 13 -#define CLOCK_GATING_BIT_CRYPTO 15 -#define CLOCK_GATING_BIT_AC97 21 -#define CLOCK_GATING_BIT_PDMA 22 -#define CLOCK_GATING_BIT_XOR0 23 -#define CLOCK_GATING_BIT_XOR1 24 -#define CLOCK_GATING_BIT_GIGA_PHY 30 -#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) -#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) -#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) -#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) -#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) -#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) -#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) -#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) -#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) -#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) -#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) -#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) -#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) -#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) -#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) -#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) -#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) -#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) - -#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) - -#define PMU_SW_RST_VIDEO_MASK BIT(16) -#define PMU_SW_RST_GPU_MASK BIT(18) - -#define PMU_PWR_GPU_PWR_DWN_MASK BIT(2) -#define PMU_PWR_VPU_PWR_DWN_MASK BIT(3) - -#define PMU_ISO_VIDEO_MASK BIT(0) -#define PMU_ISO_GPU_MASK BIT(1) - -#endif diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig deleted file mode 100644 index 98b35f5d05ba..000000000000 --- a/arch/arm/mach-mv78xx0/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_MV78XX0 - bool "Marvell MV78xx0 (DEPRECATED)" - depends on ARCH_MULTI_V5 - depends on CPU_LITTLE_ENDIAN - depends on ATAGS - select CPU_FEROCEON - select GPIOLIB - select GPIOLIB_LEGACY - select MVEBU_MBUS - select FORCE_PCI - select PLAT_ORION_LEGACY - help - Support for the following Marvell MV78xx0 series SoCs: - MV781x0, MV782x0. - - This platform is scheduled for removal in early 2027. - -if ARCH_MV78XX0 - -config MACH_TERASTATION_WXL - bool "Buffalo WLX (Terastation Duo) NAS" - help - Say 'Y' here if you want your kernel to support the - Buffalo WXL Nas. - -endif diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile deleted file mode 100644 index ddee6ae501bb..000000000000 --- a/arch/arm/mach-mv78xx0/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -ccflags-y := -I$(srctree)/arch/arm/plat-orion/include - -obj-y += common.o mpp.o irq.o pcie.o -obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o diff --git a/arch/arm/mach-mv78xx0/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h deleted file mode 100644 index d57ac967c4b3..000000000000 --- a/arch/arm/mach-mv78xx0/bridge-regs.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include "mv78xx0.h" - -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) -#define L2_WRITETHROUGH 0x00020000 - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_INT_TIMER1_CLR (~0x0004) - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) - -#endif diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c deleted file mode 100644 index 3b2e381b7383..000000000000 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c - * - * Buffalo WXL (Terastation Duo) Setup routines - * - * sebastien requiem <sebastien@requiem.fr> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <linux/ethtool.h> -#include <linux/i2c.h> -#include <linux/gpio/legacy.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "mv78xx0.h" -#include "common.h" -#include "mpp.h" - - -#define TSWXL_AUTO_SWITCH 15 -#define TSWXL_USB_POWER1 30 -#define TSWXL_USB_POWER2 31 - - -/* This arch has 2 Giga Ethernet */ - -static struct mv643xx_eth_platform_data db78x00_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data db78x00_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - - -/* 2 SATA controller supporting HotPlug */ - -static struct mv_sata_platform_data db78x00_sata_data = { - .n_ports = 2, -}; - -static struct i2c_board_info __initdata db78x00_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - - -static unsigned int wxl_mpp_config[] __initdata = { - MPP0_GE1_TXCLK, - MPP1_GE1_TXCTL, - MPP2_GE1_RXCTL, - MPP3_GE1_RXCLK, - MPP4_GE1_TXD0, - MPP5_GE1_TXD1, - MPP6_GE1_TXD2, - MPP7_GE1_TXD3, - MPP8_GE1_RXD0, - MPP9_GE1_RXD1, - MPP10_GE1_RXD2, - MPP11_GE1_RXD3, - MPP12_GPIO, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_GPIO, - MPP19_GPIO, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_UA2_TXD, - MPP25_UA2_RXD, - MPP26_UA2_CTSn, - MPP27_UA2_RTSn, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 -}; - -static struct gpio_keys_button tswxl_buttons[] = { - { - .code = KEY_OPTION, - .gpio = TSWXL_AUTO_SWITCH, - .desc = "Power-auto Switch", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data tswxl_button_data = { - .buttons = tswxl_buttons, - .nbuttons = ARRAY_SIZE(tswxl_buttons), -}; - -static struct platform_device tswxl_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &tswxl_button_data, - }, -}; - -static void __init wxl_init(void) -{ - /* - * Basic MV78xx0 setup. Needs to be called early. - */ - mv78xx0_init(); - mv78xx0_mpp_conf(wxl_mpp_config); - - /* - * Partition on-chip peripherals between the two CPU cores. - */ - mv78xx0_ehci0_init(); - mv78xx0_ehci1_init(); - mv78xx0_ge00_init(&db78x00_ge00_data); - mv78xx0_ge01_init(&db78x00_ge01_data); - mv78xx0_sata_init(&db78x00_sata_data); - mv78xx0_uart0_init(); - mv78xx0_uart1_init(); - mv78xx0_uart2_init(); - mv78xx0_uart3_init(); - mv78xx0_xor_init(); - mv78xx0_crypto_init(); - mv78xx0_i2c_init(); - i2c_register_board_info(0, &db78x00_i2c_rtc, 1); - - //enable both usb ports - gpio_direction_output(TSWXL_USB_POWER1, 1); - gpio_direction_output(TSWXL_USB_POWER2, 1); - - //enable rear switch - platform_device_register(&tswxl_button_device); -} - -static int __init wxl_pci_init(void) -{ - if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0) - mv78xx0_pcie_init(1, 1); - - return 0; -} -subsys_initcall(wxl_pci_init); - -MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") - /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ - .atag_offset = 0x100, - .nr_irqs = MV78XX0_NR_IRQS, - .init_machine = wxl_init, - .map_io = mv78xx0_map_io, - .init_early = mv78xx0_init_early, - .init_irq = mv78xx0_init_irq, - .init_time = mv78xx0_timer_init, - .restart = mv78xx0_restart, -MACHINE_END diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c deleted file mode 100644 index 679753fcc0ef..000000000000 --- a/arch/arm/mach-mv78xx0/common.c +++ /dev/null @@ -1,444 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-mv78xx0/common.c - * - * Core functions for Marvell MV78xx0 SoCs - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/ata_platform.h> -#include <linux/clk-provider.h> -#include <linux/ethtool.h> -#include <asm/hardware/cache-feroceon-l2.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <linux/platform_data/mtd-orion_nand.h> -#include <plat/time.h> -#include <plat/common.h> -#include <plat/addr-map.h> -#include "mv78xx0.h" -#include "bridge-regs.h" -#include "common.h" - -static int get_tclk(void); - -/***************************************************************************** - * Common bits - ****************************************************************************/ -int mv78xx0_core_index(void) -{ - u32 extra; - - /* - * Read Extra Features register. - */ - __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra)); - - return !!(extra & 0x00004000); -} - -static int get_hclk(void) -{ - int hclk; - - /* - * HCLK tick rate is configured by DEV_D[7:5] pins. - */ - switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) { - case 0: - hclk = 166666667; - break; - case 1: - hclk = 200000000; - break; - case 2: - hclk = 266666667; - break; - case 3: - hclk = 333333333; - break; - case 4: - hclk = 400000000; - break; - default: - panic("unknown HCLK PLL setting: %.8x\n", - readl(SAMPLE_AT_RESET_LOW)); - } - - return hclk; -} - -static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk) -{ - u32 cfg; - - /* - * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1 - * PCLK/L2CLK by bits [19:14]. - */ - if (core_index == 0) { - cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f; - } else { - cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f; - } - - /* - * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK - * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6). - */ - *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1; - - /* - * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK - * ratio (1, 2, 3). - */ - *l2clk = *pclk / (((cfg >> 4) & 3) + 1); -} - -static int get_tclk(void) -{ - int tclk_freq; - - /* - * TCLK tick rate is configured by DEV_A[2:0] strap pins. - */ - switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) { - case 1: - tclk_freq = 166666667; - break; - case 3: - tclk_freq = 200000000; - break; - default: - panic("unknown TCLK PLL setting: %.8x\n", - readl(SAMPLE_AT_RESET_HIGH)); - } - - return tclk_freq; -} - - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc mv78xx0_io_desc[] __initdata = { - { - .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, - .pfn = 0, - .length = MV78XX0_CORE_REGS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), - .length = MV78XX0_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init mv78xx0_map_io(void) -{ - unsigned long phys; - - /* - * Map the right set of per-core registers depending on - * which core we are running on. - */ - if (mv78xx0_core_index() == 0) { - phys = MV78XX0_CORE0_REGS_PHYS_BASE; - } else { - phys = MV78XX0_CORE1_REGS_PHYS_BASE; - } - mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys); - - iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc)); -} - - -/***************************************************************************** - * CLK tree - ****************************************************************************/ -static struct clk *tclk; - -static void __init clk_init(void) -{ - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk()); - - orion_clkdev_init(tclk); -} - -/***************************************************************************** - * EHCI - ****************************************************************************/ -void __init mv78xx0_ehci0_init(void) -{ - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); -} - - -/***************************************************************************** - * EHCI1 - ****************************************************************************/ -void __init mv78xx0_ehci1_init(void) -{ - orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); -} - - -/***************************************************************************** - * EHCI2 - ****************************************************************************/ -void __init mv78xx0_ehci2_init(void) -{ - orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge00_init(eth_data, - GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR, - MV643XX_TX_CSUM_DEFAULT_LIMIT); -} - - -/***************************************************************************** - * GE01 - ****************************************************************************/ -void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge01_init(eth_data, - GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - MV643XX_TX_CSUM_DEFAULT_LIMIT); -} - - -/***************************************************************************** - * GE10 - ****************************************************************************/ -void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) -{ - u32 dev, rev; - - /* - * On the Z0, ge10 and ge11 are internally connected back - * to back, and not brought out. - */ - mv78xx0_pcie_id(&dev, &rev); - if (dev == MV78X00_Z0_DEV_ID) { - eth_data->phy_addr = MV643XX_ETH_PHY_NONE; - eth_data->speed = SPEED_1000; - eth_data->duplex = DUPLEX_FULL; - } - - orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM); -} - - -/***************************************************************************** - * GE11 - ****************************************************************************/ -void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) -{ - u32 dev, rev; - - /* - * On the Z0, ge10 and ge11 are internally connected back - * to back, and not brought out. - */ - mv78xx0_pcie_id(&dev, &rev); - if (dev == MV78X00_Z0_DEV_ID) { - eth_data->phy_addr = MV643XX_ETH_PHY_NONE; - eth_data->speed = SPEED_1000; - eth_data->duplex = DUPLEX_FULL; - } - - orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM); -} - -/***************************************************************************** - * I2C - ****************************************************************************/ -void __init mv78xx0_i2c_init(void) -{ - orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); - orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); -} - -/***************************************************************************** - * SATA - ****************************************************************************/ -void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ -void __init mv78xx0_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_MV78XX0_UART_0, tclk); -} - - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init mv78xx0_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_MV78XX0_UART_1, tclk); -} - - -/***************************************************************************** - * UART2 - ****************************************************************************/ -void __init mv78xx0_uart2_init(void) -{ - orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, - IRQ_MV78XX0_UART_2, tclk); -} - -/***************************************************************************** - * UART3 - ****************************************************************************/ -void __init mv78xx0_uart3_init(void) -{ - orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, - IRQ_MV78XX0_UART_3, tclk); -} - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init mv78xx0_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); - if (mv78xx0_core_index() == 0) - mvebu_mbus_init("marvell,mv78xx0-mbus", - BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); - else - mvebu_mbus_init("marvell,mv78xx0-mbus", - BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); -} - -void __ref mv78xx0_timer_init(void) -{ - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_MV78XX0_TIMER_1, get_tclk()); -} - -/**************************************************************************** -* XOR engine -****************************************************************************/ -void __init mv78xx0_xor_init(void) -{ - orion_xor0_init(XOR_PHYS_BASE, - XOR_PHYS_BASE + 0x200, - IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1); -} - -/**************************************************************************** - * Cryptographic Engines and Security Accelerator (CESA) -****************************************************************************/ -void __init mv78xx0_crypto_init(void) -{ - mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET, - MV78XX0_MBUS_SRAM_ATTR, - MV78XX0_SRAM_PHYS_BASE, - MV78XX0_SRAM_SIZE); - orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE, - SZ_8K, IRQ_MV78XX0_CRYPTO); -} - - -/***************************************************************************** - * General - ****************************************************************************/ -static char * __init mv78xx0_id(void) -{ - u32 dev, rev; - - mv78xx0_pcie_id(&dev, &rev); - - if (dev == MV78X00_Z0_DEV_ID) { - if (rev == MV78X00_REV_Z0) - return "MV78X00-Z0"; - else - return "MV78X00-Rev-Unsupported"; - } else if (dev == MV78100_DEV_ID) { - if (rev == MV78100_REV_A0) - return "MV78100-A0"; - else if (rev == MV78100_REV_A1) - return "MV78100-A1"; - else - return "MV78100-Rev-Unsupported"; - } else if (dev == MV78200_DEV_ID) { - if (rev == MV78100_REV_A0) - return "MV78200-A0"; - else - return "MV78200-Rev-Unsupported"; - } else { - return "Device-Unknown"; - } -} - -static int __init is_l2_writethrough(void) -{ - return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); -} - -void __init mv78xx0_init(void) -{ - int core_index; - int hclk; - int pclk; - int l2clk; - - core_index = mv78xx0_core_index(); - hclk = get_hclk(); - get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); - - printk(KERN_INFO "%s ", mv78xx0_id()); - printk("core #%d, ", core_index); - printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); - printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); - printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); - printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); - - if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) - feroceon_l2_init(is_l2_writethrough()); - - /* Setup root of clk tree */ - clk_init(); -} - -void mv78xx0_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h deleted file mode 100644 index 9f1dfd595003..000000000000 --- a/arch/arm/mach-mv78xx0/common.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-mv78xx0/common.h - * - * Core functions for Marvell MV78xx0 SoCs - */ - -#ifndef __ARCH_MV78XX0_COMMON_H -#define __ARCH_MV78XX0_COMMON_H - -#include <linux/reboot.h> - -struct mv643xx_eth_platform_data; -struct mv_sata_platform_data; - -/* - * Basic MV78xx0 init functions used early by machine-setup. - */ -int mv78xx0_core_index(void); -void mv78xx0_map_io(void); -void mv78xx0_init(void); -void mv78xx0_init_early(void); -void mv78xx0_init_irq(void); - -void mv78xx0_setup_cpu_mbus(void); -void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, - int maj, int min); -void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, - int maj, int min); - -void mv78xx0_pcie_id(u32 *dev, u32 *rev); - -void mv78xx0_ehci0_init(void); -void mv78xx0_ehci1_init(void); -void mv78xx0_ehci2_init(void); -void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data); -void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data); -void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data); -void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data); -void mv78xx0_pcie_init(int init_port0, int init_port1); -void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data); -void mv78xx0_uart0_init(void); -void mv78xx0_uart1_init(void); -void mv78xx0_uart2_init(void); -void mv78xx0_uart3_init(void); -void mv78xx0_xor_init(void); -void mv78xx0_crypto_init(void); -void mv78xx0_i2c_init(void); -void mv78xx0_restart(enum reboot_mode, const char *); - -extern void mv78xx0_timer_init(void); - - -#endif diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c deleted file mode 100644 index 6e42f6446637..000000000000 --- a/arch/arm/mach-mv78xx0/irq.c +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-mv78xx0/irq.c - * - * MV78xx0 IRQ handling. - */ -#include <linux/gpio/consumer.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/exception.h> -#include <plat/orion-gpio.h> -#include <plat/irq.h> -#include "bridge-regs.h" -#include "common.h" - -static int __initdata gpio0_irqs[4] = { - IRQ_MV78XX0_GPIO_0_7, - IRQ_MV78XX0_GPIO_8_15, - IRQ_MV78XX0_GPIO_16_23, - IRQ_MV78XX0_GPIO_24_31, -}; - -static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE; - -static asmlinkage void -__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF); - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF); - if (stat) { - unsigned int hwirq = 64 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} - -void __init mv78xx0_init_irq(void) -{ - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); - orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF); - - set_handle_irq(mv78xx0_legacy_handle_irq); - - /* - * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask - * registers for core #1 are at an offset of 0x18 from those of - * core #0.) - */ - orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, - IRQ_MV78XX0_GPIO_START, gpio0_irqs); -} diff --git a/arch/arm/mach-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/irqs.h deleted file mode 100644 index 12b357d383d8..000000000000 --- a/arch/arm/mach-mv78xx0/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* IRQ definitions for Marvell MV78xx0 SoCs */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* - * MV78xx0 Low Interrupt Controller - */ -#define IRQ_MV78XX0_ERR 0 -#define IRQ_MV78XX0_SPI 1 -#define IRQ_MV78XX0_I2C_0 2 -#define IRQ_MV78XX0_I2C_1 3 -#define IRQ_MV78XX0_IDMA_0 4 -#define IRQ_MV78XX0_IDMA_1 5 -#define IRQ_MV78XX0_IDMA_2 6 -#define IRQ_MV78XX0_IDMA_3 7 -#define IRQ_MV78XX0_TIMER_0 8 -#define IRQ_MV78XX0_TIMER_1 9 -#define IRQ_MV78XX0_TIMER_2 10 -#define IRQ_MV78XX0_TIMER_3 11 -#define IRQ_MV78XX0_UART_0 12 -#define IRQ_MV78XX0_UART_1 13 -#define IRQ_MV78XX0_UART_2 14 -#define IRQ_MV78XX0_UART_3 15 -#define IRQ_MV78XX0_USB_0 16 -#define IRQ_MV78XX0_USB_1 17 -#define IRQ_MV78XX0_USB_2 18 -#define IRQ_MV78XX0_CRYPTO 19 -#define IRQ_MV78XX0_SDIO_0 20 -#define IRQ_MV78XX0_SDIO_1 21 -#define IRQ_MV78XX0_XOR_0 22 -#define IRQ_MV78XX0_XOR_1 23 -#define IRQ_MV78XX0_I2S_0 24 -#define IRQ_MV78XX0_I2S_1 25 -#define IRQ_MV78XX0_SATA 26 -#define IRQ_MV78XX0_TDMI 27 - -/* - * MV78xx0 High Interrupt Controller - */ -#define IRQ_MV78XX0_PCIE_00 32 -#define IRQ_MV78XX0_PCIE_01 33 -#define IRQ_MV78XX0_PCIE_02 34 -#define IRQ_MV78XX0_PCIE_03 35 -#define IRQ_MV78XX0_PCIE_10 36 -#define IRQ_MV78XX0_PCIE_11 37 -#define IRQ_MV78XX0_PCIE_12 38 -#define IRQ_MV78XX0_PCIE_13 39 -#define IRQ_MV78XX0_GE00_SUM 40 -#define IRQ_MV78XX0_GE00_RX 41 -#define IRQ_MV78XX0_GE00_TX 42 -#define IRQ_MV78XX0_GE00_MISC 43 -#define IRQ_MV78XX0_GE01_SUM 44 -#define IRQ_MV78XX0_GE01_RX 45 -#define IRQ_MV78XX0_GE01_TX 46 -#define IRQ_MV78XX0_GE01_MISC 47 -#define IRQ_MV78XX0_GE10_SUM 48 -#define IRQ_MV78XX0_GE10_RX 49 -#define IRQ_MV78XX0_GE10_TX 50 -#define IRQ_MV78XX0_GE10_MISC 51 -#define IRQ_MV78XX0_GE11_SUM 52 -#define IRQ_MV78XX0_GE11_RX 53 -#define IRQ_MV78XX0_GE11_TX 54 -#define IRQ_MV78XX0_GE11_MISC 55 -#define IRQ_MV78XX0_GPIO_0_7 56 -#define IRQ_MV78XX0_GPIO_8_15 57 -#define IRQ_MV78XX0_GPIO_16_23 58 -#define IRQ_MV78XX0_GPIO_24_31 59 -#define IRQ_MV78XX0_DB_IN 60 -#define IRQ_MV78XX0_DB_OUT 61 - -/* - * MV78xx0 Error Interrupt Controller - */ -#define IRQ_MV78XX0_GE_ERR 70 - -/* - * MV78XX0 General Purpose Pins - */ -#define IRQ_MV78XX0_GPIO_START 96 -#define NR_GPIO_IRQS 32 - -#define MV78XX0_NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c deleted file mode 100644 index 32bf590d79fe..000000000000 --- a/arch/arm/mach-mv78xx0/mpp.c +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-mv78x00/mpp.c - * - * MPP functions for Marvell MV78x00 SoCs - */ -#include <linux/gpio/consumer.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <plat/mpp.h> -#include "mv78xx0.h" -#include "common.h" -#include "mpp.h" - -static unsigned int __init mv78xx0_variant(void) -{ - u32 dev, rev; - - mv78xx0_pcie_id(&dev, &rev); - - if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0) - return MPP_78100_A0_MASK; - - printk(KERN_ERR "MPP setup: unknown mv78x00 variant " - "(dev %#x rev %#x)\n", dev, rev); - return 0; -} - -void __init mv78xx0_mpp_conf(unsigned int *mpp_list) -{ - orion_mpp_conf(mpp_list, mv78xx0_variant(), - MPP_MAX, DEV_BUS_VIRT_BASE); -} diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h deleted file mode 100644 index 47db52f45546..000000000000 --- a/arch/arm/mach-mv78xx0/mpp.h +++ /dev/null @@ -1,337 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins - * - * sebastien requiem <sebastien@requiem.fr> - */ - -#ifndef __MV78X00_MPP_H -#define __MV78X00_MPP_H - -#define MPP(_num, _sel, _in, _out, _78100_A0) (\ - /* MPP number */ ((_num) & 0xff) | \ - /* MPP select value */ (((_sel) & 0xf) << 8) | \ - /* may be input signal */ ((!!(_in)) << 12) | \ - /* may be output signal */ ((!!(_out)) << 13) | \ - /* available on A0 */ ((!!(_78100_A0)) << 14)) - - /* num sel i o 78100_A0 */ - -#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) - -#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) -#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) -#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) - -#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) -#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) -#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) - -#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) -#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) -#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) -#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) - -#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) -#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) -#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) - -#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) -#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) - -#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) -#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) - -#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) -#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) - -#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) -#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) - -#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) -#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) -#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) -#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) - -#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) -#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) -#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) -#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) - -#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) -#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) -#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) -#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) - -#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) -#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) -#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) -#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) - -#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) -#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) -#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) -#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) - -#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) -#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) - -#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) -#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) -#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) - -#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) -#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) -#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) - -#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) -#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) -#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) - - -#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) -#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) -#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) - - -#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) -#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) -#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) - - - -#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) -#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) - - -#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) -#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) -#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) -#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) - - - -#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) -#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) -#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) - - - -#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) -#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) -#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) - - - -#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) -#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) -#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) - - -#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) -#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) -#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) - - -#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) -#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) -#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) - - -#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) -#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) -#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) -#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) - - -#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) -#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) -#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) - - -#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) -#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) -#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) - -#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) -#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) -#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) - -#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) -#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) -#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) - -#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) -#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) - - -#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) -#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) - - -#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) -#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) -#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) - - - -#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) -#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) - - - -#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) -#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) -#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) - -#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) -#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) -#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) - - -#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) -#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) -#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) - - - - -#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) -#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) -#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) - - - - -#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) -#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) -#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) -#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) - - - -#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) -#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) -#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) - - - -#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) -#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) - - - -#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) -#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) -#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) - - - -#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) -#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) -#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) - - - -#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) -#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) -#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) - - - -#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) -#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) - - -#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) -#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) - - -#define MPP47_GPIO MPP(47, 0x1, 1, 1, 1) -#define MPP47_UNUSED MPP(47, 0x0, 0, 0, 1) - - - -#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) -#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) - - - -#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) -#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) -#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) - - -#define MPP_MAX 49 - -void mv78xx0_mpp_conf(unsigned int *mpp_list); - -#endif diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h deleted file mode 100644 index 88efb1e44142..000000000000 --- a/arch/arm/mach-mv78xx0/mv78xx0.h +++ /dev/null @@ -1,134 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Generic definitions for Marvell MV78xx0 SoC flavors: - * MV781x0 and MV782x0. - */ - -#ifndef __ASM_ARCH_MV78XX0_H -#define __ASM_ARCH_MV78XX0_H - -#include "irqs.h" - -/* - * Marvell MV78xx0 address maps. - * - * phys - * c0000000 PCIe Memory space - * f0800000 PCIe #0 I/O space - * f0900000 PCIe #1 I/O space - * f0a00000 PCIe #2 I/O space - * f0b00000 PCIe #3 I/O space - * f0c00000 PCIe #4 I/O space - * f0d00000 PCIe #5 I/O space - * f0e00000 PCIe #6 I/O space - * f0f00000 PCIe #7 I/O space - * f1000000 on-chip peripheral registers - * - * virt phys size - * fe400000 f102x000 16K core-specific peripheral registers - * fee00000 f0800000 64K PCIe #0 I/O space - * fee10000 f0900000 64K PCIe #1 I/O space - * fee20000 f0a00000 64K PCIe #2 I/O space - * fee30000 f0b00000 64K PCIe #3 I/O space - * fee40000 f0c00000 64K PCIe #4 I/O space - * fee50000 f0d00000 64K PCIe #5 I/O space - * fee60000 f0e00000 64K PCIe #6 I/O space - * fee70000 f0f00000 64K PCIe #7 I/O space - * fec00000 f1000000 1M on-chip peripheral registers - */ -#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 -#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 -#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000) -#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 -#define MV78XX0_CORE_REGS_SIZE SZ_16K - -#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_SIZE SZ_1M - -#define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfec00000) -#define MV78XX0_REGS_SIZE SZ_1M - -#define MV78XX0_SRAM_PHYS_BASE (0xf2200000) -#define MV78XX0_SRAM_SIZE SZ_8K - -#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 -#define MV78XX0_PCIE_MEM_SIZE 0x30000000 - -#define MV78XX0_MBUS_SRAM_TARGET 0x09 -#define MV78XX0_MBUS_SRAM_ATTR 0x00 - -/* - * Core-specific peripheral registers. - */ -#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) -#define BRIDGE_WINS_CPU0_BASE (MV78XX0_CORE0_REGS_PHYS_BASE) -#define BRIDGE_WINS_CPU1_BASE (MV78XX0_CORE1_REGS_PHYS_BASE) -#define BRIDGE_WINS_SZ (0xA000) - -/* - * Register Map - */ -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_PHYS_BASE + 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_PHYS_BASE + 0x1570) -#define DDR_WINDOW_CPU_SZ (0x20) - -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030) -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034) -#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) -#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) -#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200) -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200) -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300) -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300) - -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000) -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000) - -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000) -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000) -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000) -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000) - -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000) -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000) -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000) - -#define XOR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x60900) - -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000) -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000) - -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000) -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000) -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000) -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000) - -#define CRYPTO_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x90000) - -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 -#define MV78100_REV_A1 2 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 - -#endif diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c deleted file mode 100644 index 533cb7856943..000000000000 --- a/arch/arm/mach-mv78xx0/pcie.c +++ /dev/null @@ -1,280 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-mv78xx0/pcie.c - * - * PCIe functions for Marvell MV78xx0 SoCs - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/mbus.h> -#include <video/vga.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <plat/pcie.h> -#include "mv78xx0.h" -#include "common.h" - -#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4) -#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane))) -#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4) -#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane))) - -struct pcie_port { - u8 maj; - u8 min; - u8 root_bus_nr; - void __iomem *base; - spinlock_t conf_lock; - char mem_space_name[20]; - struct resource res; -}; - -static struct pcie_port pcie_port[8]; -static int num_pcie_ports; -static struct resource pcie_io_space; - -void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) -{ - *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE); - *rev = orion_pcie_rev(PCIE00_VIRT_BASE); -} - -u32 pcie_port_size[8] = { - 0, - 0x20000000, - 0x10000000, - 0x10000000, - 0x08000000, - 0x08000000, - 0x08000000, - 0x04000000, -}; - -static void __init mv78xx0_pcie_preinit(void) -{ - int i; - u32 size_each; - u32 start; - - pcie_io_space.name = "PCIe I/O Space"; - pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); - pcie_io_space.end = - MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1; - pcie_io_space.flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pcie_io_space)) - panic("can't allocate PCIe I/O space"); - - if (num_pcie_ports > 7) - panic("invalid number of PCIe ports"); - - size_each = pcie_port_size[num_pcie_ports]; - - start = MV78XX0_PCIE_MEM_PHYS_BASE; - for (i = 0; i < num_pcie_ports; i++) { - struct pcie_port *pp = pcie_port + i; - - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), - "PCIe %d.%d MEM", pp->maj, pp->min); - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res.name = pp->mem_space_name; - pp->res.flags = IORESOURCE_MEM; - pp->res.start = start; - pp->res.end = start + size_each - 1; - start += size_each; - - if (request_resource(&iomem_resource, &pp->res)) - panic("can't allocate PCIe MEM sub-space"); - - mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min), - MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min), - pp->res.start, resource_size(&pp->res)); - mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min), - MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min), - i * SZ_64K, SZ_64K, 0); - } -} - -static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct pcie_port *pp; - struct resource realio; - - if (nr >= num_pcie_ports) - return 0; - - pp = &pcie_port[nr]; - sys->private_data = pp; - pp->root_bus_nr = sys->busnr; - - /* - * Generic PCIe unit setup. - */ - orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base); - - realio.start = nr * SZ_64K; - realio.end = realio.start + SZ_64K - 1; - pci_remap_iospace(&realio, MV78XX0_PCIE_IO_PHYS_BASE(nr)); - - pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); - - return 1; -} - -static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) -{ - /* - * Don't go out when trying to access nonexisting devices - * on the local bus. - */ - if (bus == pp->root_bus_nr && dev > 1) - return 0; - - return 1; -} - -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - struct pci_sys_data *sys = bus->sysdata; - struct pcie_port *pp = sys->private_data; - unsigned long flags; - int ret; - - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&pp->conf_lock, flags); - ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); - spin_unlock_irqrestore(&pp->conf_lock, flags); - - return ret; -} - -static struct pci_ops pcie_ops = { - .read = pcie_rd_conf, - .write = pcie_wr_conf, -}; - -/* - * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it - * is operating as a root complex this needs to be switched to - * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on - * the device. Decoding setup is handled by the orion code. - */ -static void rc_pci_fixup(struct pci_dev *dev) -{ - if (dev->bus->parent == NULL && dev->devfn == 0) { - struct resource *r; - - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - pci_dev_for_each_resource(dev, r) { - r->start = 0; - r->end = 0; - r->flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); - -static int __init mv78xx0_pcie_scan_bus(int nr, struct pci_host_bridge *bridge) -{ - struct pci_sys_data *sys = pci_host_bridge_priv(bridge); - - if (nr >= num_pcie_ports) { - BUG(); - return -EINVAL; - } - - list_splice_init(&sys->resources, &bridge->windows); - bridge->dev.parent = NULL; - bridge->sysdata = sys; - bridge->busnr = sys->busnr; - bridge->ops = &pcie_ops; - - return pci_scan_root_bus_bridge(bridge); -} - -static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - struct pci_sys_data *sys = dev->bus->sysdata; - struct pcie_port *pp = sys->private_data; - - return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min; -} - -static struct hw_pci mv78xx0_pci __initdata = { - .nr_controllers = 8, - .preinit = mv78xx0_pcie_preinit, - .setup = mv78xx0_pcie_setup, - .scan = mv78xx0_pcie_scan_bus, - .map_irq = mv78xx0_pcie_map_irq, -}; - -static void __init add_pcie_port(int maj, int min, void __iomem *base) -{ - printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); - - if (orion_pcie_link_up(base)) { - struct pcie_port *pp = &pcie_port[num_pcie_ports++]; - - printk("link up\n"); - - pp->maj = maj; - pp->min = min; - pp->root_bus_nr = -1; - pp->base = base; - spin_lock_init(&pp->conf_lock); - memset(&pp->res, 0, sizeof(pp->res)); - } else { - printk("link down, ignoring\n"); - } -} - -void __init mv78xx0_pcie_init(int init_port0, int init_port1) -{ - vga_base = MV78XX0_PCIE_MEM_PHYS_BASE; - - if (init_port0) { - add_pcie_port(0, 0, PCIE00_VIRT_BASE); - if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) { - add_pcie_port(0, 1, PCIE01_VIRT_BASE); - add_pcie_port(0, 2, PCIE02_VIRT_BASE); - add_pcie_port(0, 3, PCIE03_VIRT_BASE); - } - } - - if (init_port1) { - add_pcie_port(1, 0, PCIE10_VIRT_BASE); - if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) { - add_pcie_port(1, 1, PCIE11_VIRT_BASE); - add_pcie_port(1, 2, PCIE12_VIRT_BASE); - add_pcie_port(1, 3, PCIE13_VIRT_BASE); - } - } - - pci_common_init(&mv78xx0_pci); -} diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c61999d01c80..78b8d59d7cc1 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -37,60 +37,6 @@ config MACH_RD88F5182_DT Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2, Flattened Device Tree. -config MACH_KUROBOX_PRO - bool "KuroBox Pro (DEPRECATED)" - select I2C_BOARDINFO if I2C - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - KuroBox Pro platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_DNS323 - bool "D-Link DNS-323 (DEPRECATED)" - select I2C_BOARDINFO if I2C - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - D-Link DNS-323 platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_TS209 - bool "QNAP TS-109/TS-209 (DEPRECATED)" - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - QNAP TS-109/TS-209 platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_TERASTATION_PRO2 - bool "Buffalo Terastation Pro II/Live (DEPRECATED)" - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - Buffalo Terastation Pro II/Live platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_LINKSTATION_PRO - bool "Buffalo Linkstation Pro/Live (DEPRECATED)" - depends on ATAGS - select I2C_BOARDINFO if I2C - help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation Pro/Live platform. Both v1 and - v2 devices are supported. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - config MACH_LINKSTATION_MINI bool "Buffalo Linkstation Mini (Flattened Device Tree)" select ARCH_ORION5X_DT @@ -98,36 +44,6 @@ config MACH_LINKSTATION_MINI Say 'Y' here if you want your kernel to support the Buffalo Linkstation Mini (LS-WSGL) platform. -config MACH_TS409 - bool "QNAP TS-409 (DEPRECATED)" - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - QNAP TS-409 platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_TS78XX - bool "Technologic Systems TS-78xx (DEPRECATED)" - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - Technologic Systems TS-78xx platform. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - -config MACH_MV2120 - bool "HP Media Vault mv2120 (DEPRECATED)" - depends on ATAGS - help - Say 'Y' here if you want your kernel to support the - HP Media Vault mv2120 or mv5100. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - config MACH_D2NET_DT bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" select ARCH_ORION5X_DT @@ -135,17 +51,6 @@ config MACH_D2NET_DT Say 'Y' here if you want your kernel to support the LaCie d2 Network NAS. -config MACH_NET2BIG - bool "LaCie 2Big Network (DEPRECATED)" - depends on ATAGS - select I2C_BOARDINFO if I2C - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big Network NAS. - - Support for this machine will go away in early 2027, - unless it gets converted to device tree. - config MACH_MSS2_DT bool "Maxtor Shared Storage II (Flattened Device Tree)" select ARCH_ORION5X_DT diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 6f54d7fef27a..7e9634e04318 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -2,15 +2,6 @@ ccflags-y := -I$(srctree)/arch/arm/plat-orion/include obj-y += common.o pci.o irq.o mpp.o -obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o -obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_DNS323) += dns323-setup.o -obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o -obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o -obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o -obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index be47492c6640..2614213e2cbc 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -18,7 +18,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <plat/irq.h> -#include <plat/time.h> #include "orion5x.h" #include "bridge-regs.h" #include "common.h" @@ -39,7 +38,7 @@ static void __init orion5x_dt_init(void) u32 dev, rev; orion5x_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + printk(KERN_INFO "Orion ID: %s.\n", dev_name); BUG_ON(mvebu_mbus_dt_init(false)); diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index df056d60b675..050a95af2bbf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -7,27 +7,16 @@ * Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ +#include <linux/delay.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/serial_8250.h> -#include <linux/mv643xx_i2c.h> -#include <linux/ata_platform.h> -#include <linux/delay.h> -#include <linux/clk-provider.h> -#include <linux/cpu.h> +#include <linux/mbus.h> #include <asm/page.h> #include <asm/setup.h> -#include <asm/system_misc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <linux/platform_data/mtd-orion_nand.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <plat/time.h> -#include <plat/common.h> #include "bridge-regs.h" #include "common.h" @@ -55,167 +44,6 @@ void __init orion5x_map_io(void) iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); } - -/***************************************************************************** - * CLK tree - ****************************************************************************/ -static struct clk *tclk; - -void __init clk_init(void) -{ - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, orion5x_tclk); - - orion_clkdev_init(tclk); -} - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -void __init orion5x_ehci0_init(void) -{ - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, - EHCI_PHY_ORION); -} - - -/***************************************************************************** - * EHCI1 - ****************************************************************************/ -void __init orion5x_ehci1_init(void) -{ - orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_ge00_init(eth_data, - ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR, - MV643XX_TX_CSUM_DEFAULT_LIMIT); -} - - -/***************************************************************************** - * I2C - ****************************************************************************/ -void __init orion5x_i2c_init(void) -{ - orion_i2c_init(I2C_PHYS_BASE, IRQ_ORION5X_I2C, 8); - -} - - -/***************************************************************************** - * SATA - ****************************************************************************/ -void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) -{ - orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); -} - - -/***************************************************************************** - * SPI - ****************************************************************************/ -void __init orion5x_spi_init(void) -{ - orion_spi_init(SPI_PHYS_BASE); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ -void __init orion5x_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_ORION5X_UART0, tclk); -} - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init orion5x_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_ORION5X_UART1, tclk); -} - -/***************************************************************************** - * XOR engine - ****************************************************************************/ -void __init orion5x_xor_init(void) -{ - orion_xor0_init(ORION5X_XOR_PHYS_BASE, - ORION5X_XOR_PHYS_BASE + 0x200, - IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1); -} - -/***************************************************************************** - * Cryptographic Engines and Security Accelerator (CESA) - ****************************************************************************/ -static void __init orion5x_crypto_init(void) -{ - mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET, - ORION_MBUS_SRAM_ATTR, - ORION5X_SRAM_PHYS_BASE, - ORION5X_SRAM_SIZE); - orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, - SZ_8K, IRQ_ORION5X_CESA); -} - -/***************************************************************************** - * Watchdog - ****************************************************************************/ -static struct resource orion_wdt_resource[] = { - DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), - DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), -}; - -static struct platform_device orion_wdt_device = { - .name = "orion_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(orion_wdt_resource), - .resource = orion_wdt_resource, -}; - -static void __init orion5x_wdt_init(void) -{ - platform_device_register(&orion_wdt_device); -} - - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init orion5x_init_early(void) -{ - u32 rev, dev; - const char *mbus_soc_name; - - orion_time_set_base(TIMER_VIRT_BASE); - - /* Initialize the MBUS driver */ - orion5x_pcie_id(&dev, &rev); - if (dev == MV88F5281_DEV_ID) - mbus_soc_name = "marvell,orion5x-88f5281-mbus"; - else if (dev == MV88F5182_DEV_ID) - mbus_soc_name = "marvell,orion5x-88f5182-mbus"; - else if (dev == MV88F5181_DEV_ID) - mbus_soc_name = "marvell,orion5x-88f5181-mbus"; - else if (dev == MV88F6183_DEV_ID) - mbus_soc_name = "marvell,orion5x-88f6183-mbus"; - else - mbus_soc_name = NULL; - mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE, - ORION5X_BRIDGE_WINS_SZ, - ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ); -} - void orion5x_setup_wins(void) { /* @@ -242,29 +70,6 @@ void orion5x_setup_wins(void) ORION5X_PCI_MEM_SIZE); } -int orion5x_tclk; - -static int __init orion5x_find_tclk(void) -{ - u32 dev, rev; - - orion5x_pcie_id(&dev, &rev); - if (dev == MV88F6183_DEV_ID && - (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0) - return 133333333; - - return 166666667; -} - -void __init orion5x_timer_init(void) -{ - orion5x_tclk = orion5x_find_tclk(); - - orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_ORION5X_BRIDGE, orion5x_tclk); -} - - /***************************************************************************** * General ****************************************************************************/ @@ -310,45 +115,6 @@ void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) } } -void __init orion5x_init(void) -{ - char *dev_name; - u32 dev, rev; - - orion5x_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); - - /* - * Setup Orion address map - */ - orion5x_setup_wins(); - - /* Setup root of clk tree */ - clk_init(); - - /* - * Don't issue "Wait for Interrupt" instruction if we are - * running on D0 5281 silicon. - */ - if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { - printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); - cpu_idle_poll_ctrl(true); - } - - /* - * The 5082/5181l/5182/6082/6082l/6183 have crypto - * while 5180n/5181/5281 don't have crypto. - */ - if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) || - dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID) - orion5x_crypto_init(); - - /* - * Register watchdog driver - */ - orion5x_wdt_init(); -} - void orion5x_restart(enum reboot_mode mode, const char *cmd) { /* diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 8df70e23aa82..4dc6c59bde99 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -4,9 +4,6 @@ #include <linux/reboot.h> -struct mv643xx_eth_platform_data; -struct mv_sata_platform_data; - #define ORION_MBUS_PCIE_MEM_TARGET 0x04 #define ORION_MBUS_PCIE_MEM_ATTR 0x59 #define ORION_MBUS_PCIE_IO_TARGET 0x04 @@ -32,21 +29,9 @@ void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); void orion5x_id(u32 *dev, u32 *rev, char **dev_name); -void clk_init(void); -extern int orion5x_tclk; -extern void orion5x_timer_init(void); void orion5x_setup_wins(void); -void orion5x_ehci0_init(void); -void orion5x_ehci1_init(void); -void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); -void orion5x_i2c_init(void); -void orion5x_sata_init(struct mv_sata_platform_data *sata_data); -void orion5x_spi_init(void); -void orion5x_uart0_init(void); -void orion5x_uart1_init(void); -void orion5x_xor_init(void); void orion5x_restart(enum reboot_mode, const char *); /* diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c deleted file mode 100644 index 7b81b08b0dda..000000000000 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ /dev/null @@ -1,757 +0,0 @@ -/* - * arch/arm/mach-orion5x/dns323-setup.c - * - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * Support for HW Rev C1: - * - * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ -#include <linux/gpio/legacy.h> -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/phy.h> -#include <linux/marvell_phy.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/system_info.h> -#include <plat/orion-gpio.h> -#include "orion5x.h" -#include "common.h" -#include "mpp.h" - -/* Rev A1 and B1 */ -#define DNS323_GPIO_LED_RIGHT_AMBER 1 -#define DNS323_GPIO_LED_LEFT_AMBER 2 -#define DNS323_GPIO_SYSTEM_UP 3 -#define DNS323_GPIO_LED_POWER1 4 -#define DNS323_GPIO_LED_POWER2 5 -#define DNS323_GPIO_OVERTEMP 6 -#define DNS323_GPIO_RTC 7 -#define DNS323_GPIO_POWER_OFF 8 -#define DNS323_GPIO_KEY_POWER 9 -#define DNS323_GPIO_KEY_RESET 10 - -/* Rev C1 */ -#define DNS323C_GPIO_KEY_POWER 1 -#define DNS323C_GPIO_POWER_OFF 2 -#define DNS323C_GPIO_LED_RIGHT_AMBER 8 -#define DNS323C_GPIO_LED_LEFT_AMBER 9 -#define DNS323C_GPIO_LED_POWER 17 -#define DNS323C_GPIO_FAN_BIT1 18 -#define DNS323C_GPIO_FAN_BIT0 19 - -/* Exposed to userspace, do not change */ -enum { - DNS323_REV_A1, /* 0 */ - DNS323_REV_B1, /* 1 */ - DNS323_REV_C1, /* 2 */ -}; - - -/**************************************************************************** - * PCI setup - */ - -static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci dns323_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = dns323_pci_map_irq, -}; - -static int __init dns323_pci_init(void) -{ - /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI - * gets in the way of initialising the SATA controller. - */ - if (machine_is_dns323() && system_rev == DNS323_REV_A1) - pci_common_init(&dns323_pci); - - return 0; -} - -subsys_initcall(dns323_pci_init); - -/**************************************************************************** - * 8MiB NOR flash (Spansion S29GL064M90TFIR4) - * - * Layout as used by D-Link: - * 0x00000000-0x00010000 : "MTD1" - * 0x00010000-0x00020000 : "MTD2" - * 0x00020000-0x001a0000 : "Linux Kernel" - * 0x001a0000-0x007d0000 : "File System" - * 0x007d0000-0x00800000 : "u-boot" - */ - -#define DNS323_NOR_BOOT_BASE 0xf4000000 -#define DNS323_NOR_BOOT_SIZE SZ_8M - -static struct mtd_partition dns323_partitions[] = { - { - .name = "MTD1", - .size = 0x00010000, - .offset = 0, - }, { - .name = "MTD2", - .size = 0x00010000, - .offset = 0x00010000, - }, { - .name = "Linux Kernel", - .size = 0x00180000, - .offset = 0x00020000, - }, { - .name = "File System", - .size = 0x00630000, - .offset = 0x001A0000, - }, { - .name = "u-boot", - .size = 0x00030000, - .offset = 0x007d0000, - }, -}; - -static struct physmap_flash_data dns323_nor_flash_data = { - .width = 1, - .parts = dns323_partitions, - .nr_parts = ARRAY_SIZE(dns323_partitions) -}; - -static struct resource dns323_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DNS323_NOR_BOOT_BASE, - .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device dns323_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &dns323_nor_flash_data, - }, - .resource = &dns323_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * Ethernet - */ - -static struct mv643xx_eth_platform_data dns323_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these - * functions be kept somewhere? - */ -static int __init dns323_parse_hex_nibble(char n) -{ - if (n >= '0' && n <= '9') - return n - '0'; - - if (n >= 'A' && n <= 'F') - return n - 'A' + 10; - - if (n >= 'a' && n <= 'f') - return n - 'a' + 10; - - return -1; -} - -static int __init dns323_parse_hex_byte(const char *b) -{ - int hi; - int lo; - - hi = dns323_parse_hex_nibble(b[0]); - lo = dns323_parse_hex_nibble(b[1]); - - if (hi < 0 || lo < 0) - return -1; - - return (hi << 4) | lo; -} - -static int __init dns323_read_mac_addr(void) -{ - u_int8_t addr[6]; - int i; - char *mac_page; - - /* MAC address is stored as a regular ol' string in /dev/mtdblock4 - * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). - */ - mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); - if (!mac_page) - return -ENOMEM; - - /* Sanity check the string we're looking at */ - for (i = 0; i < 5; i++) { - if (*(mac_page + (i * 3) + 2) != ':') { - goto error_fail; - } - } - - for (i = 0; i < 6; i++) { - int byte; - - byte = dns323_parse_hex_byte(mac_page + (i * 3)); - if (byte < 0) { - goto error_fail; - } - - addr[i] = byte; - } - - iounmap(mac_page); - printk("DNS-323: Found ethernet MAC address: %pM\n", addr); - - memcpy(dns323_eth_data.mac_addr, addr, 6); - - return 0; - -error_fail: - iounmap(mac_page); - return -EINVAL; -} - -/**************************************************************************** - * GPIO LEDs (simple - doesn't use hardware blinking support) - */ - -static struct gpio_led dns323ab_leds[] = { - { - .name = "power:blue", - .default_trigger = "default-on", - }, { - .name = "right:amber", - }, { - .name = "left:amber", - }, -}; - -static struct gpiod_lookup_table dns323a1_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, - 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, - 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, - 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -/* B1 is the same but power LED is active high */ -static struct gpiod_lookup_table dns323b1_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, - 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, - 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, - 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpio_led dns323c_leds[] = { - { - .name = "power:blue", - .default_trigger = "timer", - }, { - .name = "right:amber", - }, { - .name = "left:amber", - }, -}; - -static struct gpiod_lookup_table dns323c_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL, - 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL, - 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL, - 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpio_led_platform_data dns323ab_led_data = { - .num_leds = ARRAY_SIZE(dns323ab_leds), - .leds = dns323ab_leds, - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct gpio_led_platform_data dns323c_led_data = { - .num_leds = ARRAY_SIZE(dns323c_leds), - .leds = dns323c_leds, - .gpio_blink_set = orion_gpio_led_blink_set, -}; - -static struct platform_device dns323_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns323ab_led_data, - }, -}; - -/**************************************************************************** - * GPIO Attached Keys - */ - -static struct gpio_keys_button dns323ab_buttons[] = { - { - .code = KEY_RESTART, - .gpio = DNS323_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, { - .code = KEY_POWER, - .gpio = DNS323_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dns323ab_button_data = { - .buttons = dns323ab_buttons, - .nbuttons = ARRAY_SIZE(dns323ab_buttons), -}; - -static struct gpio_keys_button dns323c_buttons[] = { - { - .code = KEY_POWER, - .gpio = DNS323C_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dns323c_button_data = { - .buttons = dns323c_buttons, - .nbuttons = ARRAY_SIZE(dns323c_buttons), -}; - -static struct platform_device dns323_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dns323ab_button_data, - }, -}; - -/***************************************************************************** - * SATA - */ -static struct mv_sata_platform_data dns323_sata_data = { - .n_ports = 2, -}; - -/**************************************************************************** - * General Setup - */ -static unsigned int dns323a_mpp_modes[] __initdata = { - MPP0_PCIE_RST_OUTn, - MPP1_GPIO, /* right amber LED (sata ch0) */ - MPP2_GPIO, /* left amber LED (sata ch1) */ - MPP3_UNUSED, - MPP4_GPIO, /* power button LED */ - MPP5_GPIO, /* power button LED */ - MPP6_GPIO, /* GMT G751-2f overtemp */ - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ - MPP8_GPIO, /* triggers power off */ - MPP9_GPIO, /* power button switch */ - MPP10_GPIO, /* reset button switch */ - MPP11_UNUSED, - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_UNUSED, - MPP15_UNUSED, - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static unsigned int dns323b_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_GPIO, /* right amber LED (sata ch0) */ - MPP2_GPIO, /* left amber LED (sata ch1) */ - MPP3_GPIO, /* system up flag */ - MPP4_GPIO, /* power button LED */ - MPP5_GPIO, /* power button LED */ - MPP6_GPIO, /* GMT G751-2f overtemp */ - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ - MPP8_GPIO, /* triggers power off */ - MPP9_GPIO, /* power button switch */ - MPP10_GPIO, /* reset button switch */ - MPP11_UNUSED, - MPP12_SATA_LED, - MPP13_SATA_LED, - MPP14_SATA_LED, - MPP15_SATA_LED, - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static unsigned int dns323c_mpp_modes[] __initdata = { - MPP0_GPIO, /* ? input */ - MPP1_GPIO, /* input power switch (0 = pressed) */ - MPP2_GPIO, /* output power off */ - MPP3_UNUSED, /* ? output */ - MPP4_UNUSED, /* ? output */ - MPP5_UNUSED, /* ? output */ - MPP6_UNUSED, /* ? output */ - MPP7_UNUSED, /* ? output */ - MPP8_GPIO, /* i/o right amber LED */ - MPP9_GPIO, /* i/o left amber LED */ - MPP10_GPIO, /* input */ - MPP11_UNUSED, - MPP12_SATA_LED, - MPP13_SATA_LED, - MPP14_SATA_LED, - MPP15_SATA_LED, - MPP16_UNUSED, - MPP17_GPIO, /* power button LED */ - MPP18_GPIO, /* fan speed bit 0 */ - MPP19_GPIO, /* fan speed bit 1 */ - 0, -}; - -/* Rev C1 Fan speed notes: - * - * The fan is controlled by 2 GPIOs on this board. The settings - * of the bits is as follow: - * - * GPIO 18 GPIO 19 Fan - * - * 0 0 stopped - * 0 1 low speed - * 1 0 high speed - * 1 1 don't do that (*) - * - * (*) I think the two bits control two feed-in resistors into a fixed - * PWN circuit, setting both bits will basically go a 'bit' faster - * than high speed, but d-link doesn't do it and you may get out of - * HW spec so don't do it. - */ - -/* - * On the DNS-323 A1 and B1 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x3e | GMT G760Af | fan speed PWM controller - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323ab_i2c_devices[] = { - { - I2C_BOARD_INFO("g760a", 0x3e), - }, { - I2C_BOARD_INFO("lm75", 0x48), - }, { - I2C_BOARD_INFO("m41t80", 0x68), - }, -}; - -/* - * On the DNS-323 C1 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323c_i2c_devices[] = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, { - I2C_BOARD_INFO("m41t80", 0x68), - }, -}; - -/* DNS-323 rev. A specific power off method */ -static void dns323a_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); -} - -/* DNS-323 rev B specific power off method */ -static void dns323b_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - /* Pin has to be changed to 1 and back to 0 to do actual power off. */ - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); - mdelay(100); - gpio_set_value(DNS323_GPIO_POWER_OFF, 0); -} - -/* DNS-323 rev. C specific power off method */ -static void dns323c_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - gpio_set_value(DNS323C_GPIO_POWER_OFF, 1); -} - -static int dns323c_phy_fixup(struct phy_device *phy) -{ - phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS; - - return 0; -} - -static int __init dns323_identify_rev(void) -{ - u32 dev, rev, i, reg; - - pr_debug("DNS-323: Identifying board ... \n"); - - /* Rev A1 has a 5181 */ - orion5x_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID) { - pr_debug("DNS-323: 5181 found, board is A1\n"); - return DNS323_REV_A1; - } - pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n"); - - /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is - * a bit gross but we want to do that without links into the eth - * driver so let's poke at it directly. We default to rev B1 in - * case the accesses fail - */ - -#define ETH_SMI_REG (ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004) -#define SMI_BUSY 0x10000000 -#define SMI_READ_VALID 0x08000000 -#define SMI_OPCODE_READ 0x04000000 -#define SMI_OPCODE_WRITE 0x00000000 - - for (i = 0; i < 1000; i++) { - reg = readl(ETH_SMI_REG); - if (!(reg & SMI_BUSY)) - break; - } - if (i >= 1000) { - pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n"); - return DNS323_REV_B1; - } - writel((3 << 21) /* phy ID reg */ | - (8 << 16) /* phy addr */ | - SMI_OPCODE_READ, ETH_SMI_REG); - for (i = 0; i < 1000; i++) { - reg = readl(ETH_SMI_REG); - if (reg & SMI_READ_VALID) - break; - } - if (i >= 1000) { - pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n"); - return DNS323_REV_B1; - } - pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff); - - /* Note: the Marvell tools mask the ID with 0x3f0 before comparison - * but I don't see that making a difference here, at least with - * any known Marvell PHY ID - */ - switch(reg & 0xfff0) { - case 0x0cc0: /* MV88E1111 */ - return DNS323_REV_B1; - case 0x0e10: /* MV88E1118 */ - return DNS323_REV_C1; - default: - pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", - reg & 0xffff); - } - return DNS323_REV_B1; -} - -static void __init dns323_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - /* Identify revision */ - system_rev = dns323_identify_rev(); - pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev); - - /* Just to be tricky, the 5182 has a completely different - * set of MPP modes to the 5181. - */ - switch(system_rev) { - case DNS323_REV_A1: - orion5x_mpp_conf(dns323a_mpp_modes); - writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ - break; - case DNS323_REV_B1: - orion5x_mpp_conf(dns323b_mpp_modes); - break; - case DNS323_REV_C1: - orion5x_mpp_conf(dns323c_mpp_modes); - break; - } - - /* setup flash mapping - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 - */ - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - DNS323_NOR_BOOT_BASE, - DNS323_NOR_BOOT_SIZE); - platform_device_register(&dns323_nor_flash); - - /* Sort out LEDs, Buttons and i2c devices */ - switch(system_rev) { - case DNS323_REV_A1: - /* The 5181 power LED is active low and requires - * DNS323_GPIO_LED_POWER1 to also be low. - */ - gpiod_add_lookup_table(&dns323a1_leds_gpio_table); - gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); - gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); - i2c_register_board_info(0, dns323ab_i2c_devices, - ARRAY_SIZE(dns323ab_i2c_devices)); - - break; - case DNS323_REV_B1: - gpiod_add_lookup_table(&dns323b1_leds_gpio_table); - i2c_register_board_info(0, dns323ab_i2c_devices, - ARRAY_SIZE(dns323ab_i2c_devices)); - break; - case DNS323_REV_C1: - /* Hookup LEDs & Buttons */ - gpiod_add_lookup_table(&dns323c_leds_gpio_table); - dns323_gpio_leds.dev.platform_data = &dns323c_led_data; - dns323_button_device.dev.platform_data = &dns323c_button_data; - - /* Hookup i2c devices and fan driver */ - i2c_register_board_info(0, dns323c_i2c_devices, - ARRAY_SIZE(dns323c_i2c_devices)); - platform_device_register_simple("dns323c-fan", 0, NULL, 0); - - /* Register fixup for the PHY LEDs */ - if (!IS_BUILTIN(CONFIG_PHYLIB)) - break; - phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, - MARVELL_PHY_ID_MASK, - dns323c_phy_fixup); - } - - platform_device_register(&dns323_gpio_leds); - platform_device_register(&dns323_button_device); - - /* - * Configure peripherals. - */ - if (dns323_read_mac_addr() < 0) - printk("DNS-323: Failed to read MAC address\n"); - orion5x_ehci0_init(); - orion5x_eth_init(&dns323_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - /* Remaining GPIOs */ - switch(system_rev) { - case DNS323_REV_A1: - /* Poweroff GPIO */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - register_platform_power_off(dns323a_power_off); - break; - case DNS323_REV_B1: - /* 5182 built-in SATA init */ - orion5x_sata_init(&dns323_sata_data); - - /* The DNS323 rev B1 has flag to indicate the system is up. - * Without this flag set, power LED will flash and cannot be - * controlled via leds-gpio. - */ - if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0) - gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1); - - /* Poweroff GPIO */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - register_platform_power_off(dns323b_power_off); - break; - case DNS323_REV_C1: - /* 5182 built-in SATA init */ - orion5x_sata_init(&dns323_sata_data); - - /* Poweroff GPIO */ - if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - register_platform_power_off(dns323c_power_off); - - /* Now, -this- should theoretically be done by the sata_mv driver - * once I figure out what's going on there. Maybe the behaviour - * of the LEDs should be somewhat passed via the platform_data. - * for now, just whack the register and make the LEDs happy - * - * Note: AFAIK, rev B1 needs the same treatment but I'll let - * somebody else test it. - */ - writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); - break; - } -} - -/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ -MACHINE_START(DNS323, "D-Link DNS-323") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = dns323_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c deleted file mode 100644 index e61b9ab06943..000000000000 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ /dev/null @@ -1,407 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-orion5x/kurobox_pro-setup.c - * - * Maintainer: Ronen Shitrit <rshitrit@marvell.com> - */ -#include <linux/gpio/consumer.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/rawnand.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <linux/platform_data/mtd-orion_nand.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" - -/***************************************************************************** - * KUROBOX-PRO Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 -#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K - -/* - * 256M NAND flash on Device bus chip select 1 - */ - -#define KUROBOX_PRO_NAND_BASE 0xfc000000 -#define KUROBOX_PRO_NAND_SIZE SZ_2M - -/***************************************************************************** - * 256MB NAND Flash on Device bus CS0 - ****************************************************************************/ - -static struct mtd_partition kurobox_pro_nand_parts[] = { - { - .name = "uImage", - .offset = 0, - .size = SZ_4M, - }, { - .name = "rootfs", - .offset = SZ_4M, - .size = SZ_64M, - }, { - .name = "extra", - .offset = SZ_4M + SZ_64M, - .size = SZ_256M - (SZ_4M + SZ_64M), - }, -}; - -static struct resource kurobox_pro_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NAND_BASE, - .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, -}; - -static struct orion_nand_data kurobox_pro_nand_data = { - .parts = kurobox_pro_nand_parts, - .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device kurobox_pro_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &kurobox_pro_nand_data, - }, - .resource = &kurobox_pro_nand_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data kurobox_pro_nor_flash_data = { - .width = 1, -}; - -static struct resource kurobox_pro_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NOR_BOOT_BASE, - .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device kurobox_pro_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &kurobox_pro_nor_flash_data, - }, - .num_resources = 1, - .resource = &kurobox_pro_nor_flash_resource, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - /* - * PCI isn't used on the Kuro - */ - return -1; -} - -static struct hw_pci kurobox_pro_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = kurobox_pro_pci_map_irq, -}; - -static int __init kurobox_pro_pci_init(void) -{ - if (machine_is_kurobox_pro()) { - orion5x_pci_disable(); - pci_common_init(&kurobox_pro_pci); - } - - return 0; -} - -subsys_initcall(kurobox_pro_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data kurobox_pro_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * Kurobox Pro specific power off method via UART1-attached microcontroller - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -static int kurobox_pro_miconread(unsigned char *buf, int count) -{ - int i; - int timeout; - - for (i = 0; i < count; i++) { - timeout = 10; - - while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) { - if (--timeout == 0) - break; - udelay(1000); - } - - if (timeout == 0) - break; - buf[i] = readl(UART1_REG(RX)); - } - - /* return read bytes */ - return i; -} - -static int kurobox_pro_miconwrite(const unsigned char *buf, int count) -{ - int i = 0; - - while (count--) { - while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE)) - barrier(); - writel(buf[i++], UART1_REG(TX)); - } - - return 0; -} - -static int kurobox_pro_miconsend(const unsigned char *data, int count) -{ - int i; - unsigned char checksum = 0; - unsigned char recv_buf[40]; - unsigned char send_buf[40]; - unsigned char correct_ack[3]; - int retry = 2; - - /* Generate checksum */ - for (i = 0; i < count; i++) - checksum -= data[i]; - - do { - /* Send data */ - kurobox_pro_miconwrite(data, count); - - /* send checksum */ - kurobox_pro_miconwrite(&checksum, 1); - - if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) { - printk(KERN_ERR ">%s: receive failed.\n", __func__); - - /* send preamble to clear the receive buffer */ - memset(&send_buf, 0xff, sizeof(send_buf)); - kurobox_pro_miconwrite(send_buf, sizeof(send_buf)); - - /* make dummy reads */ - mdelay(100); - kurobox_pro_miconread(recv_buf, sizeof(recv_buf)); - } else { - /* Generate expected ack */ - correct_ack[0] = 0x01; - correct_ack[1] = data[1]; - correct_ack[2] = 0x00; - - /* checksum Check */ - if ((recv_buf[0] + recv_buf[1] + recv_buf[2] + - recv_buf[3]) & 0xFF) { - printk(KERN_ERR ">%s: Checksum Error : " - "Received data[%02x, %02x, %02x, %02x]" - "\n", __func__, recv_buf[0], - recv_buf[1], recv_buf[2], recv_buf[3]); - } else { - /* Check Received Data */ - if (correct_ack[0] == recv_buf[0] && - correct_ack[1] == recv_buf[1] && - correct_ack[2] == recv_buf[2]) { - /* Interval for next command */ - mdelay(10); - - /* Receive ACK */ - return 0; - } - } - /* Received NAK or illegal Data */ - printk(KERN_ERR ">%s: Error : NAK or Illegal Data " - "Received\n", __func__); - } - } while (retry--); - - /* Interval for next command */ - mdelay(10); - - return -1; -} - -static void kurobox_pro_power_off(void) -{ - const unsigned char watchdogkill[] = {0x01, 0x35, 0x00}; - const unsigned char shutdownwait[] = {0x00, 0x0c}; - const unsigned char poweroff[] = {0x00, 0x06}; - /* 38400 baud divisor */ - const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (38400,8n1,even parity) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x1b, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x07, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* Send the commands to shutdown the Kurobox Pro */ - kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ; - kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ; - kurobox_pro_miconsend(poweroff, sizeof(poweroff)); -} - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int kurobox_pro_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_GPIO, /* GPIO Micon */ - MPP3_GPIO, /* GPIO Rtc */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_NAND, /* NAND Flash REn */ - MPP7_NAND, /* NAND Flash WEn */ - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UART, /* UART1 RXD */ - MPP17_UART, /* UART1 TXD */ - MPP18_UART, /* UART1 CTSn */ - MPP19_UART, /* UART1 RTSn */ - 0, -}; - -static void __init kurobox_pro_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(kurobox_pro_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&kurobox_pro_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&kurobox_pro_sata_data); - orion5x_uart0_init(); - orion5x_uart1_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE); - platform_device_register(&kurobox_pro_nor_flash); - - if (machine_is_kurobox_pro()) { - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), - ORION_MBUS_DEVBUS_ATTR(0), - KUROBOX_PRO_NAND_BASE, - KUROBOX_PRO_NAND_SIZE); - platform_device_register(&kurobox_pro_nand_flash); - } - - i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); - - /* register Kurobox Pro specific power-off method */ - register_platform_power_off(kurobox_pro_power_off); -} - -#ifdef CONFIG_MACH_KUROBOX_PRO -MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") - /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = kurobox_pro_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_LINKSTATION_PRO -MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = kurobox_pro_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c deleted file mode 100644 index b15fe5b7a0f9..000000000000 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - */ -#include <linux/gpio/legacy.h> -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" - -#define MV2120_NOR_BOOT_BASE 0xf4000000 -#define MV2120_NOR_BOOT_SIZE SZ_512K - -#define MV2120_GPIO_RTC_IRQ 3 -#define MV2120_GPIO_KEY_RESET 17 -#define MV2120_GPIO_KEY_POWER 18 -#define MV2120_GPIO_POWER_OFF 19 - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ -static struct mv643xx_eth_platform_data mv2120_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static struct mv_sata_platform_data mv2120_sata_data = { - .n_ports = 2, -}; - -static struct mtd_partition mv2120_partitions[] = { - { - .name = "firmware", - .size = 0x00080000, - .offset = 0, - }, -}; - -static struct physmap_flash_data mv2120_nor_flash_data = { - .width = 1, - .parts = mv2120_partitions, - .nr_parts = ARRAY_SIZE(mv2120_partitions) -}; - -static struct resource mv2120_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MV2120_NOR_BOOT_BASE, - .end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mv2120_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mv2120_nor_flash_data, - }, - .resource = &mv2120_nor_flash_resource, - .num_resources = 1, -}; - -static struct gpio_keys_button mv2120_buttons[] = { - { - .code = KEY_RESTART, - .gpio = MV2120_GPIO_KEY_RESET, - .desc = "reset", - .active_low = 1, - }, { - .code = KEY_POWER, - .gpio = MV2120_GPIO_KEY_POWER, - .desc = "power", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mv2120_button_data = { - .buttons = mv2120_buttons, - .nbuttons = ARRAY_SIZE(mv2120_buttons), -}; - -static struct platform_device mv2120_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &mv2120_button_data, - }, -}; - - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mv2120_mpp_modes[] __initdata = { - MPP0_GPIO, /* Sys status LED */ - MPP1_GPIO, /* Sys error LED */ - MPP2_GPIO, /* OverTemp interrupt */ - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* V_LED 5V */ - MPP5_GPIO, /* V_LED 3.3V */ - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_GPIO, /* SATA 0 fail LED */ - MPP9_GPIO, /* SATA 1 fail LED */ - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_GPIO, /* Reset button */ - MPP18_GPIO, /* Power button */ - MPP19_GPIO, /* Power off */ - 0, -}; - -static struct i2c_board_info __initdata mv2120_i2c_rtc = { - I2C_BOARD_INFO("pcf8563", 0x51), - .irq = 0, -}; - -static struct gpio_led mv2120_led_pins[] = { - { - .name = "mv2120:blue:health", - }, - { - .name = "mv2120:red:health", - }, - { - .name = "mv2120:led:bright", - .default_trigger = "default-on", - }, - { - .name = "mv2120:led:dimmed", - }, - { - .name = "mv2120:red:sata0", - }, - { - .name = "mv2120:red:sata1", - }, - -}; - -static struct gpiod_lookup_table mv2120_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL, - 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL, - 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, - 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, - 3, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL, - 4, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL, - 5, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpio_led_platform_data mv2120_led_data = { - .leds = mv2120_led_pins, - .num_leds = ARRAY_SIZE(mv2120_led_pins), -}; - -static struct platform_device mv2120_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mv2120_led_data, - } -}; - -static void mv2120_power_off(void) -{ - pr_info("%s: triggering power-off...\n", __func__); - gpio_set_value(MV2120_GPIO_POWER_OFF, 0); -} - -static void __init mv2120_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mv2120_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mv2120_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mv2120_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MV2120_NOR_BOOT_BASE, - MV2120_NOR_BOOT_SIZE); - platform_device_register(&mv2120_nor_flash); - - platform_device_register(&mv2120_button_device); - - if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0) - mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ); - else - gpio_free(MV2120_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mv2120_i2c_rtc, 1); - gpiod_add_lookup_table(&mv2120_leds_gpio_table); - platform_device_register(&mv2120_leds); - - /* register mv2120 specific power-off method */ - if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0) - pr_err("mv2120: failed to setup power-off GPIO\n"); - register_platform_power_off(mv2120_power_off); -} - -/* Warning: HP uses a wrong mach-type (=526) in their bootloader */ -MACHINE_START(MV2120, "HP Media Vault mv2120") - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = mv2120_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c deleted file mode 100644 index f04571e79805..000000000000 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ /dev/null @@ -1,444 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-orion5x/net2big-setup.c - * - * LaCie 2Big Network NAS setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio/legacy.h> -#include <linux/gpio/machine.h> -#include <linux/delay.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <plat/orion-gpio.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" - -/***************************************************************************** - * LaCie 2Big Network Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define NET2BIG_NOR_BOOT_BASE 0xfff80000 -#define NET2BIG_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on Boot Device - ****************************************************************************/ - -/* - * TODO: Check write support on flash MX29LV400CBTC-70G - */ - -static struct mtd_partition net2big_partitions[] = { - { - .name = "Full512kb", - .size = MTDPART_SIZ_FULL, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data net2big_nor_flash_data = { - .width = 1, - .parts = net2big_partitions, - .nr_parts = ARRAY_SIZE(net2big_partitions), -}; - -static struct resource net2big_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = NET2BIG_NOR_BOOT_BASE, - .end = NET2BIG_NOR_BOOT_BASE - + NET2BIG_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device net2big_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &net2big_nor_flash_data, - }, - .num_resources = 1, - .resource = &net2big_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data net2big_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -/* - * i2c addr | chip | description - * 0x32 | Ricoh 5C372b | RTC - * 0x50 | HT24LC08 | eeprom (1kB) - */ -static struct i2c_board_info __initdata net2big_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, { - I2C_BOARD_INFO("24c08", 0x50), - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data net2big_sata_data = { - .n_ports = 2, -}; - -#define NET2BIG_GPIO_SATA_POWER_REQ 19 -#define NET2BIG_GPIO_SATA0_POWER 23 -#define NET2BIG_GPIO_SATA1_POWER 25 - -static void __init net2big_sata_power_init(void) -{ - int err; - - /* Configure GPIOs over MPP max number. */ - orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1); - orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1); - - err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status"); - if (err == 0) { - err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER); - if (err) - gpio_free(NET2BIG_GPIO_SATA0_POWER); - } - if (err) { - pr_err("net2big: failed to setup SATA0 power GPIO\n"); - return; - } - - err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status"); - if (err == 0) { - err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER); - if (err) - gpio_free(NET2BIG_GPIO_SATA1_POWER); - } - if (err) { - pr_err("net2big: failed to setup SATA1 power GPIO\n"); - goto err_free_1; - } - - err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request"); - if (err == 0) { - err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0); - if (err) - gpio_free(NET2BIG_GPIO_SATA_POWER_REQ); - } - if (err) { - pr_err("net2big: failed to setup SATA power request GPIO\n"); - goto err_free_2; - } - - if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) && - gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) { - return; - } - - /* - * SATA power up on both disk is done by pulling high the CPLD power - * request line. The 300ms delay is related to the CPLD clock and is - * needed to be sure that the CPLD has take into account the low line - * status. - */ - msleep(300); - gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1); - pr_info("net2big: power up SATA hard disks\n"); - - return; - -err_free_2: - gpio_free(NET2BIG_GPIO_SATA1_POWER); -err_free_1: - gpio_free(NET2BIG_GPIO_SATA0_POWER); - - return; -} - -/***************************************************************************** - * GPIO LEDs - ****************************************************************************/ - -/* - * The power front LEDs (blue and red) and SATA red LEDs are controlled via a - * single GPIO line and are compatible with the leds-gpio driver. - * - * The SATA blue LEDs have some hardware blink capabilities which are detailed - * in the following array: - * - * SATAx blue LED | SATAx activity | LED state - * | | - * 0 | 0 | blink (rate 300ms) - * 1 | 0 | off - * ? | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Blue LED have priority. - */ - -#define NET2BIG_GPIO_PWR_RED_LED 6 -#define NET2BIG_GPIO_PWR_BLUE_LED 16 -#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7 - -#define NET2BIG_GPIO_SATA0_RED_LED 11 -#define NET2BIG_GPIO_SATA1_RED_LED 10 - -#define NET2BIG_GPIO_SATA0_BLUE_LED 17 -#define NET2BIG_GPIO_SATA1_BLUE_LED 13 - -static struct gpio_led net2big_leds[] = { - { - .name = "net2big:red:power", - }, - { - .name = "net2big:blue:power", - }, - { - .name = "net2big:red:sata0", - }, - { - .name = "net2big:red:sata1", - }, -}; - -static struct gpiod_lookup_table net2big_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL, - 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL, - 1, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL, - 2, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL, - 3, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpio_led_platform_data net2big_led_data = { - .num_leds = ARRAY_SIZE(net2big_leds), - .leds = net2big_leds, -}; - -static struct platform_device net2big_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &net2big_led_data, - }, -}; - -static void __init net2big_gpio_leds_init(void) -{ - int err; - - /* Stop initial CPLD slow red/blue blinking on power LED. */ - err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP, - "Power LED blink stop"); - if (err == 0) { - err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1); - if (err) - gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP); - } - if (err) - pr_err("net2big: failed to setup power LED blink GPIO\n"); - - /* - * Configure SATA0 and SATA1 blue LEDs to blink in relation with the - * hard disk activity. - */ - err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED, - "SATA0 blue LED control"); - if (err == 0) { - err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1); - if (err) - gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED); - } - if (err) - pr_err("net2big: failed to setup SATA0 blue LED GPIO\n"); - - err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED, - "SATA1 blue LED control"); - if (err == 0) { - err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1); - if (err) - gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED); - } - if (err) - pr_err("net2big: failed to setup SATA1 blue LED GPIO\n"); - - gpiod_add_lookup_table(&net2big_leds_gpio_table); - platform_device_register(&net2big_gpio_leds); -} - -/**************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define NET2BIG_GPIO_PUSH_BUTTON 18 -#define NET2BIG_GPIO_POWER_SWITCH_ON 8 -#define NET2BIG_GPIO_POWER_SWITCH_OFF 9 - -#define NET2BIG_SWITCH_POWER_ON 0x1 -#define NET2BIG_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button net2big_buttons[] = { - { - .type = EV_SW, - .code = NET2BIG_SWITCH_POWER_OFF, - .gpio = NET2BIG_GPIO_POWER_SWITCH_OFF, - .desc = "Power rocker switch (auto|off)", - .active_low = 0, - }, - { - .type = EV_SW, - .code = NET2BIG_SWITCH_POWER_ON, - .gpio = NET2BIG_GPIO_POWER_SWITCH_ON, - .desc = "Power rocker switch (on|auto)", - .active_low = 0, - }, - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = NET2BIG_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data net2big_button_data = { - .buttons = net2big_buttons, - .nbuttons = ARRAY_SIZE(net2big_buttons), -}; - -static struct platform_device net2big_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &net2big_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int net2big_mpp_modes[] __initdata = { - MPP0_GPIO, /* Raid mode (bit 0) */ - MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ - MPP2_GPIO, /* Raid mode (bit 1) */ - MPP3_GPIO, /* Board ID (bit 0) */ - MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */ - MPP5_GPIO, /* Fan fail detection */ - MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */ - MPP7_GPIO, /* Disable initial blinking on front LED */ - MPP8_GPIO, /* Rear power switch (on|auto) */ - MPP9_GPIO, /* Rear power switch (auto|off) */ - MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */ - MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */ - MPP12_GPIO, /* Board ID (bit 1) */ - MPP13_GPIO, /* SATA 1 blue LED blink control */ - MPP14_SATA_LED, - MPP15_SATA_LED, - MPP16_GPIO, /* Blue front LED control */ - MPP17_GPIO, /* SATA 0 blue LED blink control */ - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ - MPP19_GPIO, /* SATA{0,1} power On/Off request */ - 0, - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ - /* 23: SATA 0 power status */ - /* 24: Board power off */ - /* 25: SATA 1 power status */ -}; - -#define NET2BIG_GPIO_POWER_OFF 24 - -static void net2big_power_off(void) -{ - gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1); -} - -static void __init net2big_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(net2big_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&net2big_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - orion5x_xor_init(); - - net2big_sata_power_init(); - orion5x_sata_init(&net2big_sata_data); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - NET2BIG_NOR_BOOT_BASE, - NET2BIG_NOR_BOOT_SIZE); - platform_device_register(&net2big_nor_flash); - - platform_device_register(&net2big_gpio_buttons); - net2big_gpio_leds_init(); - - i2c_register_board_info(0, net2big_i2c_devices, - ARRAY_SIZE(net2big_i2c_devices)); - - orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1); - - if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 && - gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0) - register_platform_power_off(net2big_power_off); - else - pr_err("net2big: failed to configure power-off GPIO\n"); - - pr_notice("net2big: Flash writing is not yet supported.\n"); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(NET2BIG, "LaCie 2Big Network") - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = net2big_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 06f5320036b1..3d1e6ad0e14b 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -15,7 +15,6 @@ #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> -#include <plat/addr-map.h> #include "common.h" #include "orion5x.h" diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c deleted file mode 100644 index c3db3376950a..000000000000 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ /dev/null @@ -1,366 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Buffalo Terastation Pro II/Live Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - */ -#include <linux/gpio/legacy.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" - -/***************************************************************************** - * Terastation Pro 2/Live Info - ****************************************************************************/ - -/* - * Terastation Pro 2 hardware : - * - Marvell 88F5281-D0 - * - Marvell 88SX6042 SATA controller (PCI) - * - Marvell 88E1118 Gigabit Ethernet PHY - * - 256KB NOR flash - * - 128MB of DDR RAM - * - PCIe port (not equipped) - */ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define TSP2_NOR_BOOT_BASE 0xf4000000 -#define TSP2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data tsp2_nor_flash_data = { - .width = 1, -}; - -static struct resource tsp2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = TSP2_NOR_BOOT_BASE, - .end = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device tsp2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &tsp2_nor_flash_data, - }, - .num_resources = 1, - .resource = &tsp2_nor_flash_resource, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ -#define TSP2_PCI_SLOT0_OFFS 7 -#define TSP2_PCI_SLOT0_IRQ_PIN 11 - -static void __init tsp2_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = TSP2_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); - } else { - printk(KERN_ERR "tsp2_pci_preinit failed " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "tsp2_pci_preinit failed to " - "gpio_request %d\n", pin); - } -} - -static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - /* - * PCI IRQs are connected via GPIOs. - */ - if (slot == TSP2_PCI_SLOT0_OFFS) - return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN); - - return -1; -} - -static struct hw_pci tsp2_pci __initdata = { - .nr_controllers = 2, - .preinit = tsp2_pci_preinit, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = tsp2_pci_map_irq, -}; - -static int __init tsp2_pci_init(void) -{ - if (machine_is_terastation_pro2()) - pci_common_init(&tsp2_pci); - - return 0; -} - -subsys_initcall(tsp2_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data tsp2_eth_data = { - .phy_addr = 0, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define TSP2_RTC_GPIO 9 - -static struct i2c_board_info __initdata tsp2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - -/***************************************************************************** - * Terastation Pro II specific power off method via UART1-attached - * microcontroller - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -static int tsp2_miconread(unsigned char *buf, int count) -{ - int i; - int timeout; - - for (i = 0; i < count; i++) { - timeout = 10; - - while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) { - if (--timeout == 0) - break; - udelay(1000); - } - - if (timeout == 0) - break; - buf[i] = readl(UART1_REG(RX)); - } - - /* return read bytes */ - return i; -} - -static int tsp2_miconwrite(const unsigned char *buf, int count) -{ - int i = 0; - - while (count--) { - while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE)) - barrier(); - writel(buf[i++], UART1_REG(TX)); - } - - return 0; -} - -static int tsp2_miconsend(const unsigned char *data, int count) -{ - int i; - unsigned char checksum = 0; - unsigned char recv_buf[40]; - unsigned char send_buf[40]; - unsigned char correct_ack[3]; - int retry = 2; - - /* Generate checksum */ - for (i = 0; i < count; i++) - checksum -= data[i]; - - do { - /* Send data */ - tsp2_miconwrite(data, count); - - /* send checksum */ - tsp2_miconwrite(&checksum, 1); - - if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) { - printk(KERN_ERR ">%s: receive failed.\n", __func__); - - /* send preamble to clear the receive buffer */ - memset(&send_buf, 0xff, sizeof(send_buf)); - tsp2_miconwrite(send_buf, sizeof(send_buf)); - - /* make dummy reads */ - mdelay(100); - tsp2_miconread(recv_buf, sizeof(recv_buf)); - } else { - /* Generate expected ack */ - correct_ack[0] = 0x01; - correct_ack[1] = data[1]; - correct_ack[2] = 0x00; - - /* checksum Check */ - if ((recv_buf[0] + recv_buf[1] + recv_buf[2] + - recv_buf[3]) & 0xFF) { - printk(KERN_ERR ">%s: Checksum Error : " - "Received data[%02x, %02x, %02x, %02x]" - "\n", __func__, recv_buf[0], - recv_buf[1], recv_buf[2], recv_buf[3]); - } else { - /* Check Received Data */ - if (correct_ack[0] == recv_buf[0] && - correct_ack[1] == recv_buf[1] && - correct_ack[2] == recv_buf[2]) { - /* Interval for next command */ - mdelay(10); - - /* Receive ACK */ - return 0; - } - } - /* Received NAK or illegal Data */ - printk(KERN_ERR ">%s: Error : NAK or Illegal Data " - "Received\n", __func__); - } - } while (retry--); - - /* Interval for next command */ - mdelay(10); - - return -1; -} - -static void tsp2_power_off(void) -{ - const unsigned char watchdogkill[] = {0x01, 0x35, 0x00}; - const unsigned char shutdownwait[] = {0x00, 0x0c}; - const unsigned char poweroff[] = {0x00, 0x06}; - /* 38400 baud divisor */ - const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (38400,8n1,even parity) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x1b, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x07, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* Send the commands to shutdown the Terastation Pro II */ - tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ; - tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ; - tsp2_miconsend(poweroff, sizeof(poweroff)); -} - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int tsp2_mpp_modes[] __initdata = { - MPP0_PCIE_RST_OUTn, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_UNUSED, - MPP4_NAND, /* BOOT NAND Flash REn */ - MPP5_NAND, /* BOOT NAND Flash WEn */ - MPP6_NAND, /* BOOT NAND Flash HREn[0] */ - MPP7_NAND, /* BOOT NAND Flash WEn[0] */ - MPP8_GPIO, /* MICON int */ - MPP9_GPIO, /* RTC int */ - MPP10_UNUSED, - MPP11_GPIO, /* PCI Int A */ - MPP12_UNUSED, - MPP13_GPIO, /* UPS on UART0 enable */ - MPP14_GPIO, /* UPS low battery detection */ - MPP15_UNUSED, - MPP16_UART, /* UART1 RXD */ - MPP17_UART, /* UART1 TXD */ - MPP18_UART, /* UART1 CTSn */ - MPP19_UART, /* UART1 RTSn */ - 0, -}; - -static void __init tsp2_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(tsp2_mpp_modes); - - /* - * Configure peripherals. - */ - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - TSP2_NOR_BOOT_BASE, - TSP2_NOR_BOOT_SIZE); - platform_device_register(&tsp2_nor_flash); - - orion5x_ehci0_init(); - orion5x_eth_init(&tsp2_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - orion5x_uart1_init(); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TSP2_RTC_GPIO) == 0) - tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO); - else - gpio_free(TSP2_RTC_GPIO); - } - if (tsp2_i2c_rtc.irq == 0) - pr_warn("tsp2_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &tsp2_i2c_rtc, 1); - - /* register Terastation Pro II specific power-off method */ - register_platform_power_off(tsp2_power_off); -} - -MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = tsp2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c deleted file mode 100644 index 25cd50306c65..000000000000 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ /dev/null @@ -1,331 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * QNAP TS-109/TS-209 Board Setup - * - * Maintainer: Byron Bradley <byron.bbradley@gmail.com> - */ -#include <linux/gpio/legacy.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/rawnand.h> -#include <linux/mv643xx_eth.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <linux/ata_platform.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" -#include "tsx09-common.h" - -#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 -#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M - -/**************************************************************************** - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatibility with - * existing QNAP firmware. - * - * Layout as used by QNAP: - * [2] 0x00000000-0x00200000 : "Kernel" - * [3] 0x00200000-0x00600000 : "RootFS1" - * [4] 0x00600000-0x00700000 : "RootFS2" - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) - * [5] 0x00760000-0x00780000 : "U-Boot Config" - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) - ***************************************************************************/ -static struct mtd_partition qnap_ts209_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0x00780000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0, - }, { - .name = "RootFS1", - .size = 0x00400000, - .offset = 0x00200000, - }, { - .name = "RootFS2", - .size = 0x00100000, - .offset = 0x00600000, - }, { - .name = "U-Boot Config", - .size = 0x00020000, - .offset = 0x00760000, - }, { - .name = "NAS Config", - .size = 0x00060000, - .offset = 0x00700000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data qnap_ts209_nor_flash_data = { - .width = 1, - .parts = qnap_ts209_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) -}; - -static struct resource qnap_ts209_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = QNAP_TS209_NOR_BOOT_BASE, - .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device qnap_ts209_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &qnap_ts209_nor_flash_data, - }, - .resource = &qnap_ts209_nor_flash_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -#define QNAP_TS209_PCI_SLOT0_OFFS 7 -#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 -#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 - -static void __init qnap_ts209_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } - - pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } -} - -static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - /* - * PCI IRQs are connected via GPIOs. - */ - switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); - case 1: - return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci qnap_ts209_pci __initdata = { - .nr_controllers = 2, - .preinit = qnap_ts209_pci_preinit, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = qnap_ts209_pci_map_irq, -}; - -static int __init qnap_ts209_pci_init(void) -{ - if (machine_is_ts209()) - pci_common_init(&qnap_ts209_pci); - - return 0; -} - -subsys_initcall(qnap_ts209_pci_init); - -/***************************************************************************** - * RTC S35390A on I2C bus - ****************************************************************************/ - -#define TS209_RTC_GPIO 3 - -static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), - .irq = 0, -}; - -/**************************************************************************** - * GPIO Attached Keys - * Power button is attached to the PIC microcontroller - ****************************************************************************/ - -#define QNAP_TS209_GPIO_KEY_MEDIA 1 -#define QNAP_TS209_GPIO_KEY_RESET 2 - -static struct gpio_keys_button qnap_ts209_buttons[] = { - { - .code = KEY_COPY, - .gpio = QNAP_TS209_GPIO_KEY_MEDIA, - .desc = "USB Copy Button", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = QNAP_TS209_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data qnap_ts209_button_data = { - .buttons = qnap_ts209_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), -}; - -static struct platform_device qnap_ts209_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &qnap_ts209_button_data, - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data qnap_ts209_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - - * General Setup - ****************************************************************************/ -static unsigned int ts209_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_GPIO, /* USB copy button */ - MPP2_GPIO, /* Load defaults button */ - MPP3_GPIO, /* GPIO RTC */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_GPIO, /* PCI Int A */ - MPP7_GPIO, /* PCI Int B */ - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UART, /* UART1 RXD */ - MPP17_UART, /* UART1 TXD */ - MPP18_GPIO, /* SW_RST */ - MPP19_UNUSED, - 0, -}; - -static void __init qnap_ts209_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(ts209_mpp_modes); - - /* - * MPP[20] PCI clock 0 - * MPP[21] PCI clock 1 - * MPP[22] USB 0 over current - * MPP[23-25] Reserved - */ - - /* - * Configure peripherals. - */ - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts209_nor_flash); - - orion5x_ehci0_init(); - orion5x_ehci1_init(); - qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE + - qnap_ts209_partitions[5].offset, - qnap_ts209_partitions[5].size); - orion5x_eth_init(&qnap_tsx09_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&qnap_ts209_sata_data); - orion5x_uart0_init(); - orion5x_uart1_init(); - orion5x_xor_init(); - - platform_device_register(&qnap_ts209_button_device); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TS209_RTC_GPIO) == 0) - qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); - else - gpio_free(TS209_RTC_GPIO); - } - if (qnap_ts209_i2c_rtc.irq == 0) - pr_warn("qnap_ts209_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - - /* register tsx09 specific power-off method */ - register_platform_power_off(qnap_tsx09_power_off); -} - -MACHINE_START(TS209, "QNAP TS-109/TS-209") - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = qnap_ts209_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c deleted file mode 100644 index f92acef0b45f..000000000000 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ /dev/null @@ -1,329 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * QNAP TS-409 Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> - * - * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com> - * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> - */ -#include <linux/gpio/legacy.h> -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/serial_reg.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" -#include "tsx09-common.h" - -/***************************************************************************** - * QNAP TS-409 Info - ****************************************************************************/ - -/* - * QNAP TS-409 hardware : - * - Marvell 88F5281-D0 - * - Marvell 88SX7042 SATA controller (PCIe) - * - Marvell 88E1118 Gigabit Ethernet PHY - * - RTC S35390A (@0x30) on I2C bus - * - 8MB NOR flash - * - 256MB of DDR-2 RAM - */ - -/* - * 8MB NOR flash Device bus boot chip select - */ - -#define QNAP_TS409_NOR_BOOT_BASE 0xff800000 -#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M - -/**************************************************************************** - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatibility with - * existing QNAP firmware. - * - * Layout as used by QNAP: - * [2] 0x00000000-0x00200000 : "Kernel" - * [3] 0x00200000-0x00600000 : "RootFS1" - * [4] 0x00600000-0x00700000 : "RootFS2" - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) - * [5] 0x00760000-0x00780000 : "U-Boot Config" - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) - ***************************************************************************/ -static struct mtd_partition qnap_ts409_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0x00780000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0, - }, { - .name = "RootFS1", - .size = 0x00400000, - .offset = 0x00200000, - }, { - .name = "RootFS2", - .size = 0x00100000, - .offset = 0x00600000, - }, { - .name = "U-Boot Config", - .size = 0x00020000, - .offset = 0x00760000, - }, { - .name = "NAS Config", - .size = 0x00060000, - .offset = 0x00700000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data qnap_ts409_nor_flash_data = { - .width = 1, - .parts = qnap_ts409_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts409_partitions) -}; - -static struct resource qnap_ts409_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = QNAP_TS409_NOR_BOOT_BASE, - .end = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device qnap_ts409_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &qnap_ts409_nor_flash_data, }, - .num_resources = 1, - .resource = &qnap_ts409_nor_flash_resource, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - /* - * PCI isn't used on the TS-409 - */ - return -1; -} - -static struct hw_pci qnap_ts409_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = qnap_ts409_pci_map_irq, -}; - -static int __init qnap_ts409_pci_init(void) -{ - if (machine_is_ts409()) - pci_common_init(&qnap_ts409_pci); - - return 0; -} - -subsys_initcall(qnap_ts409_pci_init); - -/***************************************************************************** - * RTC S35390A on I2C bus - ****************************************************************************/ - -#define TS409_RTC_GPIO 10 - -static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = { - I2C_BOARD_INFO("s35390a", 0x30), -}; - -/***************************************************************************** - * LEDs attached to GPIO - ****************************************************************************/ - -static struct gpio_led ts409_led_pins[] = { - { - .name = "ts409:red:sata1", - }, { - .name = "ts409:red:sata2", - }, { - .name = "ts409:red:sata3", - }, { - .name = "ts409:red:sata4", - }, -}; - -static struct gpiod_lookup_table ts409_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, - 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, - 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL, - 2, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL, - 3, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpio_led_platform_data ts409_led_data = { - .leds = ts409_led_pins, - .num_leds = ARRAY_SIZE(ts409_led_pins), -}; - -static struct platform_device ts409_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ts409_led_data, - }, -}; - -/**************************************************************************** - * GPIO Attached Keys - * Power button is attached to the PIC microcontroller - ****************************************************************************/ - -#define QNAP_TS409_GPIO_KEY_RESET 14 -#define QNAP_TS409_GPIO_KEY_MEDIA 15 - -static struct gpio_keys_button qnap_ts409_buttons[] = { - { - .code = KEY_RESTART, - .gpio = QNAP_TS409_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, { - .code = KEY_COPY, - .gpio = QNAP_TS409_GPIO_KEY_MEDIA, - .desc = "USB Copy Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data qnap_ts409_button_data = { - .buttons = qnap_ts409_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts409_buttons), -}; - -static struct platform_device qnap_ts409_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &qnap_ts409_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int ts409_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_UNUSED, - MPP4_GPIO, /* HDD 1 status */ - MPP5_GPIO, /* HDD 2 status */ - MPP6_GPIO, /* HDD 3 status */ - MPP7_GPIO, /* HDD 4 status */ - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_GPIO, /* RTC int */ - MPP11_UNUSED, - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_GPIO, /* SW_RST */ - MPP15_GPIO, /* USB copy button */ - MPP16_UART, /* UART1 RXD */ - MPP17_UART, /* UART1 TXD */ - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init qnap_ts409_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(ts409_mpp_modes); - - /* - * Configure peripherals. - */ - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - QNAP_TS409_NOR_BOOT_BASE, - QNAP_TS409_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts409_nor_flash); - - orion5x_ehci0_init(); - qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE + - qnap_ts409_partitions[5].offset, - qnap_ts409_partitions[5].size); - orion5x_eth_init(&qnap_tsx09_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - orion5x_uart1_init(); - - platform_device_register(&qnap_ts409_button_device); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TS409_RTC_GPIO) == 0) - qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO); - else - gpio_free(TS409_RTC_GPIO); - } - if (qnap_ts409_i2c_rtc.irq == 0) - pr_warn("qnap_ts409_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1); - gpiod_add_lookup_table(&ts409_leds_gpio_table); - platform_device_register(&ts409_leds); - - /* register tsx09 specific power-off method */ - register_platform_power_off(qnap_tsx09_power_off); -} - -MACHINE_START(TS409, "QNAP TS-409") - /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = qnap_ts409_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h deleted file mode 100644 index 2f4fe3ca5c1a..000000000000 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#define TS7800_FPGA_MAGIC 0x00b480 -#define FPGAID(_magic, _rev) ((_magic << 8) + _rev) - -/* - * get yer id's from http://ts78xx.digriz.org.uk/ - * do *not* make up your own or 'borrow' any! - */ -enum fpga_ids { - /* Technologic Systems */ - TS7800_REV_1 = FPGAID(TS7800_FPGA_MAGIC, 0x01), - TS7800_REV_2 = FPGAID(TS7800_FPGA_MAGIC, 0x02), - TS7800_REV_3 = FPGAID(TS7800_FPGA_MAGIC, 0x03), - TS7800_REV_4 = FPGAID(TS7800_FPGA_MAGIC, 0x04), - TS7800_REV_5 = FPGAID(TS7800_FPGA_MAGIC, 0x05), - TS7800_REV_6 = FPGAID(TS7800_FPGA_MAGIC, 0x06), - TS7800_REV_7 = FPGAID(TS7800_FPGA_MAGIC, 0x07), - TS7800_REV_8 = FPGAID(TS7800_FPGA_MAGIC, 0x08), - TS7800_REV_9 = FPGAID(TS7800_FPGA_MAGIC, 0x09), - - /* Unaffordable & Expensive */ - UAE_DUMMY = FPGAID(0xffffff, 0x01), -}; - -struct fpga_device { - unsigned present:1; - unsigned init:1; -}; - -struct fpga_devices { - /* Technologic Systems */ - struct fpga_device ts_rtc; - struct fpga_device ts_nand; - struct fpga_device ts_rng; -}; - -struct ts78xx_fpga_data { - unsigned int id; - int state; - - struct fpga_devices supports; -}; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c deleted file mode 100644 index af810e7ccd79..000000000000 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ /dev/null @@ -1,574 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-orion5x/ts78xx-setup.c - * - * Maintainer: Alexander Clouter <alex@digriz.org.uk> - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sysfs.h> -#include <linux/platform_device.h> -#include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/mtd/platnand.h> -#include <linux/timeriomem-rng.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include "common.h" -#include "mpp.h" -#include "orion5x.h" -#include "ts78xx-fpga.h" - -/***************************************************************************** - * TS-78xx Info - ****************************************************************************/ - -/* - * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE - */ -#define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000 -#define TS78XX_FPGA_REGS_VIRT_BASE IOMEM(0xff900000) -#define TS78XX_FPGA_REGS_SIZE SZ_1M - -static struct ts78xx_fpga_data ts78xx_fpga = { - .id = 0, - .state = 1, -/* .supports = ... - populated by ts78xx_fpga_supports() */ -}; - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc ts78xx_io_desc[] __initdata = { - { - .virtual = (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE), - .length = TS78XX_FPGA_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init ts78xx_map_io(void) -{ - orion5x_map_io(); - iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc)); -} - -/***************************************************************************** - * Ethernet - ****************************************************************************/ -static struct mv643xx_eth_platform_data ts78xx_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data ts78xx_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c - ****************************************************************************/ -#define TS_RTC_CTRL (TS78XX_FPGA_REGS_PHYS_BASE + 0x808) -#define TS_RTC_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x80c) - -static struct resource ts78xx_ts_rtc_resources[] = { - DEFINE_RES_MEM(TS_RTC_CTRL, 0x01), - DEFINE_RES_MEM(TS_RTC_DATA, 0x01), -}; - -static struct platform_device ts78xx_ts_rtc_device = { - .name = "rtc-m48t86", - .id = -1, - .resource = ts78xx_ts_rtc_resources, - .num_resources = ARRAY_SIZE(ts78xx_ts_rtc_resources), -}; - -static int ts78xx_ts_rtc_load(void) -{ - int rc; - - if (ts78xx_fpga.supports.ts_rtc.init == 0) { - rc = platform_device_register(&ts78xx_ts_rtc_device); - if (!rc) - ts78xx_fpga.supports.ts_rtc.init = 1; - } else { - rc = platform_device_add(&ts78xx_ts_rtc_device); - } - - if (rc) - pr_info("RTC could not be registered: %d\n", rc); - - return rc; -} - -static void ts78xx_ts_rtc_unload(void) -{ - platform_device_del(&ts78xx_ts_rtc_device); -} - -/***************************************************************************** - * NAND Flash - ****************************************************************************/ -#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x800) /* VIRT */ -#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x804) /* PHYS */ - -/* - * hardware specific access to control-lines - * - * ctrl: - * NAND_NCE: bit 0 -> bit 2 - * NAND_CLE: bit 1 -> bit 1 - * NAND_ALE: bit 2 -> bit 0 - */ -static void ts78xx_ts_nand_cmd_ctrl(struct nand_chip *this, int cmd, - unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - unsigned char bits; - - bits = (ctrl & NAND_NCE) << 2; - bits |= ctrl & NAND_CLE; - bits |= (ctrl & NAND_ALE) >> 2; - - writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->legacy.IO_ADDR_W); -} - -static int ts78xx_ts_nand_dev_ready(struct nand_chip *chip) -{ - return readb(TS_NAND_CTRL) & 0x20; -} - -static void ts78xx_ts_nand_write_buf(struct nand_chip *chip, - const uint8_t *buf, int len) -{ - void __iomem *io_base = chip->legacy.IO_ADDR_W; - unsigned long off = ((unsigned long)buf & 3); - int sz; - - if (off) { - sz = min_t(int, 4 - off, len); - writesb(io_base, buf, sz); - buf += sz; - len -= sz; - } - - sz = len >> 2; - if (sz) { - u32 *buf32 = (u32 *)buf; - writesl(io_base, buf32, sz); - buf += sz << 2; - len -= sz << 2; - } - - if (len) - writesb(io_base, buf, len); -} - -static void ts78xx_ts_nand_read_buf(struct nand_chip *chip, - uint8_t *buf, int len) -{ - void __iomem *io_base = chip->legacy.IO_ADDR_R; - unsigned long off = ((unsigned long)buf & 3); - int sz; - - if (off) { - sz = min_t(int, 4 - off, len); - readsb(io_base, buf, sz); - buf += sz; - len -= sz; - } - - sz = len >> 2; - if (sz) { - u32 *buf32 = (u32 *)buf; - readsl(io_base, buf32, sz); - buf += sz << 2; - len -= sz << 2; - } - - if (len) - readsb(io_base, buf, len); -} - -static struct mtd_partition ts78xx_ts_nand_parts[] = { - { - .name = "mbr", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - }, { - .name = "initrd", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_nand_data ts78xx_ts_nand_data = { - .chip = { - .nr_chips = 1, - .partitions = ts78xx_ts_nand_parts, - .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), - .chip_delay = 15, - .bbt_options = NAND_BBT_USE_FLASH, - }, - .ctrl = { - /* - * The HW ECC offloading functions, used to give about a 9% - * performance increase for 'dd if=/dev/mtdblockX' and 5% for - * nanddump. This all however was changed by git commit - * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is - * no performance advantage to be had so we no longer bother - */ - .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, - .dev_ready = ts78xx_ts_nand_dev_ready, - .write_buf = ts78xx_ts_nand_write_buf, - .read_buf = ts78xx_ts_nand_read_buf, - }, -}; - -static struct resource ts78xx_ts_nand_resources - = DEFINE_RES_MEM(TS_NAND_DATA, 4); - -static struct platform_device ts78xx_ts_nand_device = { - .name = "gen_nand", - .id = -1, - .dev = { - .platform_data = &ts78xx_ts_nand_data, - }, - .resource = &ts78xx_ts_nand_resources, - .num_resources = 1, -}; - -static int ts78xx_ts_nand_load(void) -{ - int rc; - - if (ts78xx_fpga.supports.ts_nand.init == 0) { - rc = platform_device_register(&ts78xx_ts_nand_device); - if (!rc) - ts78xx_fpga.supports.ts_nand.init = 1; - } else - rc = platform_device_add(&ts78xx_ts_nand_device); - - if (rc) - pr_info("NAND could not be registered: %d\n", rc); - return rc; -}; - -static void ts78xx_ts_nand_unload(void) -{ - platform_device_del(&ts78xx_ts_nand_device); -} - -/***************************************************************************** - * HW RNG - ****************************************************************************/ -#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) - -static struct resource ts78xx_ts_rng_resource - = DEFINE_RES_MEM(TS_RNG_DATA, 4); - -static struct timeriomem_rng_data ts78xx_ts_rng_data = { - .period = 1000000, /* one second */ -}; - -static struct platform_device ts78xx_ts_rng_device = { - .name = "timeriomem_rng", - .id = -1, - .dev = { - .platform_data = &ts78xx_ts_rng_data, - }, - .resource = &ts78xx_ts_rng_resource, - .num_resources = 1, -}; - -static int ts78xx_ts_rng_load(void) -{ - int rc; - - if (ts78xx_fpga.supports.ts_rng.init == 0) { - rc = platform_device_register(&ts78xx_ts_rng_device); - if (!rc) - ts78xx_fpga.supports.ts_rng.init = 1; - } else - rc = platform_device_add(&ts78xx_ts_rng_device); - - if (rc) - pr_info("RNG could not be registered: %d\n", rc); - return rc; -}; - -static void ts78xx_ts_rng_unload(void) -{ - platform_device_del(&ts78xx_ts_rng_device); -} - -/***************************************************************************** - * FPGA 'hotplug' support code - ****************************************************************************/ -static void ts78xx_fpga_devices_zero_init(void) -{ - ts78xx_fpga.supports.ts_rtc.init = 0; - ts78xx_fpga.supports.ts_nand.init = 0; - ts78xx_fpga.supports.ts_rng.init = 0; -} - -static void ts78xx_fpga_supports(void) -{ - /* TODO: put this 'table' into ts78xx-fpga.h */ - switch (ts78xx_fpga.id) { - case TS7800_REV_1: - case TS7800_REV_2: - case TS7800_REV_3: - case TS7800_REV_4: - case TS7800_REV_5: - case TS7800_REV_6: - case TS7800_REV_7: - case TS7800_REV_8: - case TS7800_REV_9: - ts78xx_fpga.supports.ts_rtc.present = 1; - ts78xx_fpga.supports.ts_nand.present = 1; - ts78xx_fpga.supports.ts_rng.present = 1; - break; - default: - /* enable devices if magic matches */ - switch ((ts78xx_fpga.id >> 8) & 0xffffff) { - case TS7800_FPGA_MAGIC: - pr_warn("unrecognised FPGA revision 0x%.2x\n", - ts78xx_fpga.id & 0xff); - ts78xx_fpga.supports.ts_rtc.present = 1; - ts78xx_fpga.supports.ts_nand.present = 1; - ts78xx_fpga.supports.ts_rng.present = 1; - break; - default: - ts78xx_fpga.supports.ts_rtc.present = 0; - ts78xx_fpga.supports.ts_nand.present = 0; - ts78xx_fpga.supports.ts_rng.present = 0; - } - } -} - -static int ts78xx_fpga_load_devices(void) -{ - int tmp, ret = 0; - - if (ts78xx_fpga.supports.ts_rtc.present == 1) { - tmp = ts78xx_ts_rtc_load(); - if (tmp) - ts78xx_fpga.supports.ts_rtc.present = 0; - ret |= tmp; - } - if (ts78xx_fpga.supports.ts_nand.present == 1) { - tmp = ts78xx_ts_nand_load(); - if (tmp) - ts78xx_fpga.supports.ts_nand.present = 0; - ret |= tmp; - } - if (ts78xx_fpga.supports.ts_rng.present == 1) { - tmp = ts78xx_ts_rng_load(); - if (tmp) - ts78xx_fpga.supports.ts_rng.present = 0; - ret |= tmp; - } - - return ret; -} - -static int ts78xx_fpga_unload_devices(void) -{ - - if (ts78xx_fpga.supports.ts_rtc.present == 1) - ts78xx_ts_rtc_unload(); - if (ts78xx_fpga.supports.ts_nand.present == 1) - ts78xx_ts_nand_unload(); - if (ts78xx_fpga.supports.ts_rng.present == 1) - ts78xx_ts_rng_unload(); - - return 0; -} - -static int ts78xx_fpga_load(void) -{ - ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - - pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n", - (ts78xx_fpga.id >> 8) & 0xffffff, - ts78xx_fpga.id & 0xff); - - ts78xx_fpga_supports(); - - if (ts78xx_fpga_load_devices()) { - ts78xx_fpga.state = -1; - return -EBUSY; - } - - return 0; -}; - -static int ts78xx_fpga_unload(void) -{ - unsigned int fpga_id; - - fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - - /* - * There does not seem to be a feasible way to block access to the GPIO - * pins from userspace (/dev/mem). This if clause should hopefully warn - * those foolish enough not to follow 'policy' :) - * - * UrJTAG SVN since r1381 can be used to reprogram the FPGA - */ - if (ts78xx_fpga.id != fpga_id) { - pr_err("FPGA magic/rev mismatch\n" - "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", - (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, - (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); - ts78xx_fpga.state = -1; - return -EBUSY; - } - - if (ts78xx_fpga_unload_devices()) { - ts78xx_fpga.state = -1; - return -EBUSY; - } - - return 0; -}; - -static ssize_t ts78xx_fpga_show(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) -{ - if (ts78xx_fpga.state < 0) - return sprintf(buf, "borked\n"); - - return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); -} - -static ssize_t ts78xx_fpga_store(struct kobject *kobj, - struct kobj_attribute *attr, const char *buf, size_t n) -{ - int value, ret; - - if (ts78xx_fpga.state < 0) { - pr_err("FPGA borked, you must powercycle ASAP\n"); - return -EBUSY; - } - - if (strncmp(buf, "online", sizeof("online") - 1) == 0) - value = 1; - else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) - value = 0; - else - return -EINVAL; - - if (ts78xx_fpga.state == value) - return n; - - ret = (ts78xx_fpga.state == 0) - ? ts78xx_fpga_load() - : ts78xx_fpga_unload(); - - if (!(ret < 0)) - ts78xx_fpga.state = value; - - return n; -} - -static struct kobj_attribute ts78xx_fpga_attr = - __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int ts78xx_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_GPIO, /* JTAG Clock */ - MPP2_GPIO, /* JTAG Data In */ - MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ - MPP4_GPIO, /* JTAG Data Out */ - MPP5_GPIO, /* JTAG TMS */ - MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ - MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_UNUSED, - MPP15_UNUSED, - MPP16_UART, - MPP17_UART, - MPP18_UART, - MPP19_UART, - /* - * MPP[20] PCI Clock Out 1 - * MPP[21] PCI Clock Out 0 - * MPP[22] Unused - * MPP[23] Unused - * MPP[24] Unused - * MPP[25] Unused - */ - 0, -}; - -static void __init ts78xx_init(void) -{ - int ret; - - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(ts78xx_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&ts78xx_eth_data); - orion5x_sata_init(&ts78xx_sata_data); - orion5x_uart0_init(); - orion5x_uart1_init(); - orion5x_xor_init(); - - /* FPGA init */ - ts78xx_fpga_devices_zero_init(); - ret = ts78xx_fpga_load(); - ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr); - if (ret) - pr_err("sysfs_create_file failed: %d\n", ret); -} - -MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") - /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ - .atag_offset = 0x100, - .nr_irqs = ORION5X_NR_IRQS, - .init_machine = ts78xx_init, - .map_io = ts78xx_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c deleted file mode 100644 index 099e6fdfa8e6..000000000000 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * QNAP TS-x09 Boards common functions - * - * Maintainers: Lennert Buytenhek <buytenh@marvell.com> - * Byron Bradley <byron.bbradley@gmail.com> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/mv643xx_eth.h> -#include <linux/timex.h> -#include <linux/serial_reg.h> -#include "orion5x.h" -#include "tsx09-common.h" -#include "common.h" - -/***************************************************************************** - * QNAP TS-x09 specific power off method via UART1-attached PIC - ****************************************************************************/ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -void qnap_tsx09_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (19200,8n1) */ - writel(0x83, UART1_REG(LCR)); - writel(divisor & 0xff, UART1_REG(DLL)); - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); - writel(0x03, UART1_REG(LCR)); - writel(0x00, UART1_REG(IER)); - writel(0x00, UART1_REG(FCR)); - writel(0x00, UART1_REG(MCR)); - - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); -} - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -struct mv643xx_eth_platform_data qnap_tsx09_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -static int __init qnap_tsx09_parse_hex_nibble(char n) -{ - if (n >= '0' && n <= '9') - return n - '0'; - - if (n >= 'A' && n <= 'F') - return n - 'A' + 10; - - if (n >= 'a' && n <= 'f') - return n - 'a' + 10; - - return -1; -} - -static int __init qnap_tsx09_parse_hex_byte(const char *b) -{ - int hi; - int lo; - - hi = qnap_tsx09_parse_hex_nibble(b[0]); - lo = qnap_tsx09_parse_hex_nibble(b[1]); - - if (hi < 0 || lo < 0) - return -1; - - return (hi << 4) | lo; -} - -static int __init qnap_tsx09_check_mac_addr(const char *addr_str) -{ - u_int8_t addr[6]; - int i; - - for (i = 0; i < 6; i++) { - int byte; - - /* - * Enforce "xx:xx:xx:xx:xx:xx\n" format. - */ - if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) - return -1; - - byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3)); - if (byte < 0) - return -1; - addr[i] = byte; - } - - printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); - - memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6); - - return 0; -} - -/* - * The 'NAS Config' flash partition has an ext2 filesystem which - * contains a file that has the ethernet MAC address in plain text - * (format "xx:xx:xx:xx:xx:xx\n"). - */ -void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size) -{ - unsigned long addr; - - for (addr = mem_base; addr < (mem_base + size); addr += 1024) { - char *nor_page; - int ret = 0; - - nor_page = ioremap(addr, 1024); - if (nor_page != NULL) { - ret = qnap_tsx09_check_mac_addr(nor_page); - iounmap(nor_page); - } - - if (ret == 0) - break; - } -} diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h deleted file mode 100644 index 72bedc6b82fb..000000000000 --- a/arch/arm/mach-orion5x/tsx09-common.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ARCH_ORION5X_TSX09_COMMON_H -#define __ARCH_ORION5X_TSX09_COMMON_H - -/* - * QNAP TS-x09 Boards power-off function - */ -extern void qnap_tsx09_power_off(void); - -/* - * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory - */ -extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size); - -/* - * QNAP TS-x09 Boards ethernet declaration - */ -extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data; - - -#endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 6574659dfb61..c40cdb2274ea 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -980,7 +980,7 @@ config CACHE_B15_RAC config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" - depends on ARCH_MV78XX0 || ARCH_MVEBU + depends on ARCH_MVEBU default y select OUTER_CACHE help diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index e8c7580df8ca..dfde39cdd992 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -5,5 +5,5 @@ ccflags-y := -I$(src)/include orion-gpio-$(CONFIG_GPIOLIB) += gpio.o -obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o +obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o mpp.o obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c deleted file mode 100644 index cabe98386245..000000000000 --- a/arch/arm/plat-orion/common.c +++ /dev/null @@ -1,826 +0,0 @@ -/* - * arch/arm/plat-orion/common.c - * - * Marvell Orion SoC common setup code used by multiple mach-/common.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/serial_8250.h> -#include <linux/ata_platform.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/mv643xx_eth.h> -#include <linux/mv643xx_i2c.h> -#include <linux/platform_data/dma-mv_xor.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <plat/common.h> -#include <linux/phy.h> - -/* Create a clkdev entry for a given device/clk */ -void __init orion_clkdev_add(const char *con_id, const char *dev_id, - struct clk *clk) -{ - clkdev_create(clk, con_id, "%s", dev_id); -} - -/* Create clkdev entries for all orion platforms except kirkwood. - Kirkwood has gated clocks for some of its peripherals, so creates - its own clkdev entries. For all the other orion devices, create - clkdev entries to the tclk. */ -void __init orion_clkdev_init(struct clk *tclk) -{ - orion_clkdev_add(NULL, "orion_spi.0", tclk); - orion_clkdev_add(NULL, "orion_spi.1", tclk); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", tclk); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); - orion_clkdev_add(NULL, "orion_wdt", tclk); - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); -} - -/* Fill in the resources structure and link it into the platform - device structure. There is always a memory region, and nearly - always an interrupt.*/ -static void fill_resources(struct platform_device *device, - struct resource *resources, - resource_size_t mapbase, - resource_size_t size) -{ - device->resource = resources; - device->num_resources = 1; - resources[0].flags = IORESOURCE_MEM; - resources[0].start = mapbase; - resources[0].end = mapbase + size; -} - -static void fill_resources_irq(struct platform_device *device, - struct resource *resources, - resource_size_t mapbase, - resource_size_t size, - unsigned int irq) -{ - fill_resources(device, resources, mapbase, size); - - device->num_resources++; - resources[1].flags = IORESOURCE_IRQ; - resources[1].start = irq; - resources[1].end = irq; -} - -/***************************************************************************** - * UART - ****************************************************************************/ -static unsigned long __init uart_get_clk_rate(struct clk *clk) -{ - clk_prepare_enable(clk); - return clk_get_rate(clk); -} - -static void __init uart_complete( - struct platform_device *orion_uart, - struct plat_serial8250_port *data, - struct resource *resources, - void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk) -{ - data->mapbase = mapbase; - data->membase = membase; - data->irq = irq; - data->uartclk = uart_get_clk_rate(clk); - orion_uart->dev.platform_data = data; - - fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq); - platform_device_register(orion_uart); -} - -/***************************************************************************** - * UART0 - ****************************************************************************/ -static struct plat_serial8250_port orion_uart0_data[] = { - { - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - }, { - }, -}; - -static struct resource orion_uart0_resources[2]; - -static struct platform_device orion_uart0 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -void __init orion_uart0_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk) -{ - uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources, - membase, mapbase, irq, clk); -} - -/***************************************************************************** - * UART1 - ****************************************************************************/ -static struct plat_serial8250_port orion_uart1_data[] = { - { - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - }, { - }, -}; - -static struct resource orion_uart1_resources[2]; - -static struct platform_device orion_uart1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, -}; - -void __init orion_uart1_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk) -{ - uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources, - membase, mapbase, irq, clk); -} - -/***************************************************************************** - * UART2 - ****************************************************************************/ -static struct plat_serial8250_port orion_uart2_data[] = { - { - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - }, { - }, -}; - -static struct resource orion_uart2_resources[2]; - -static struct platform_device orion_uart2 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, -}; - -void __init orion_uart2_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk) -{ - uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources, - membase, mapbase, irq, clk); -} - -/***************************************************************************** - * UART3 - ****************************************************************************/ -static struct plat_serial8250_port orion_uart3_data[] = { - { - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - }, { - }, -}; - -static struct resource orion_uart3_resources[2]; - -static struct platform_device orion_uart3 = { - .name = "serial8250", - .id = 3, -}; - -void __init orion_uart3_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk) -{ - uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources, - membase, mapbase, irq, clk); -} - -/***************************************************************************** - * SoC RTC - ****************************************************************************/ -static struct resource orion_rtc_resource[2]; - -void __init orion_rtc_init(unsigned long mapbase, - unsigned long irq) -{ - orion_rtc_resource[0].start = mapbase; - orion_rtc_resource[0].end = mapbase + SZ_32 - 1; - orion_rtc_resource[0].flags = IORESOURCE_MEM; - orion_rtc_resource[1].start = irq; - orion_rtc_resource[1].end = irq; - orion_rtc_resource[1].flags = IORESOURCE_IRQ; - - platform_device_register_simple("rtc-mv", -1, orion_rtc_resource, 2); -} - -/***************************************************************************** - * GE - ****************************************************************************/ -static __init void ge_complete( - struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, - struct resource *orion_ge_resource, unsigned long irq, - struct platform_device *orion_ge_shared, - struct platform_device *orion_ge_mvmdio, - struct mv643xx_eth_platform_data *eth_data, - struct platform_device *orion_ge) -{ - orion_ge_resource->start = irq; - orion_ge_resource->end = irq; - eth_data->shared = orion_ge_shared; - orion_ge->dev.platform_data = eth_data; - - platform_device_register(orion_ge_shared); - if (orion_ge_mvmdio) - platform_device_register(orion_ge_mvmdio); - platform_device_register(orion_ge); -} - -/***************************************************************************** - * GE00 - ****************************************************************************/ -static struct mv643xx_eth_shared_platform_data orion_ge00_shared_data; - -static struct resource orion_ge00_shared_resources[] = { - { - .name = "ge00 base", - }, -}; - -static struct platform_device orion_ge00_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .dev = { - .platform_data = &orion_ge00_shared_data, - }, -}; - -static struct resource orion_ge_mvmdio_resources[] = { - { - .name = "ge00 mvmdio base", - }, { - .name = "ge00 mvmdio err irq", - }, -}; - -static struct platform_device orion_ge_mvmdio = { - .name = "orion-mdio", - .id = -1, -}; - -static struct resource orion_ge00_resources[] = { - { - .name = "ge00 irq", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_ge00 = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = orion_ge00_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq, - unsigned long irq_err, - unsigned int tx_csum_limit) -{ - fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, - mapbase + 0x2000, SZ_16K - 1); - fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources, - mapbase + 0x2004, 0x84 - 1, irq_err); - orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; - ge_complete(&orion_ge00_shared_data, - orion_ge00_resources, irq, &orion_ge00_shared, - &orion_ge_mvmdio, - eth_data, &orion_ge00); -} - -/***************************************************************************** - * GE01 - ****************************************************************************/ -static struct mv643xx_eth_shared_platform_data orion_ge01_shared_data; - -static struct resource orion_ge01_shared_resources[] = { - { - .name = "ge01 base", - } -}; - -static struct platform_device orion_ge01_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 1, - .dev = { - .platform_data = &orion_ge01_shared_data, - }, -}; - -static struct resource orion_ge01_resources[] = { - { - .name = "ge01 irq", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_ge01 = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 1, - .resource = orion_ge01_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq, - unsigned int tx_csum_limit) -{ - fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, - mapbase + 0x2000, SZ_16K - 1); - orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; - ge_complete(&orion_ge01_shared_data, - orion_ge01_resources, irq, &orion_ge01_shared, - NULL, - eth_data, &orion_ge01); -} - -/***************************************************************************** - * GE10 - ****************************************************************************/ -static struct mv643xx_eth_shared_platform_data orion_ge10_shared_data; - -static struct resource orion_ge10_shared_resources[] = { - { - .name = "ge10 base", - } -}; - -static struct platform_device orion_ge10_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 2, - .dev = { - .platform_data = &orion_ge10_shared_data, - }, -}; - -static struct resource orion_ge10_resources[] = { - { - .name = "ge10 irq", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_ge10 = { - .name = MV643XX_ETH_NAME, - .id = 2, - .num_resources = 1, - .resource = orion_ge10_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq) -{ - fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, - mapbase + 0x2000, SZ_16K - 1); - ge_complete(&orion_ge10_shared_data, - orion_ge10_resources, irq, &orion_ge10_shared, - NULL, - eth_data, &orion_ge10); -} - -/***************************************************************************** - * GE11 - ****************************************************************************/ -static struct mv643xx_eth_shared_platform_data orion_ge11_shared_data; - -static struct resource orion_ge11_shared_resources[] = { - { - .name = "ge11 base", - }, -}; - -static struct platform_device orion_ge11_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 3, - .dev = { - .platform_data = &orion_ge11_shared_data, - }, -}; - -static struct resource orion_ge11_resources[] = { - { - .name = "ge11 irq", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_ge11 = { - .name = MV643XX_ETH_NAME, - .id = 3, - .num_resources = 1, - .resource = orion_ge11_resources, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq) -{ - fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, - mapbase + 0x2000, SZ_16K - 1); - ge_complete(&orion_ge11_shared_data, - orion_ge11_resources, irq, &orion_ge11_shared, - NULL, - eth_data, &orion_ge11); -} - -/***************************************************************************** - * I2C - ****************************************************************************/ -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource orion_i2c_resources[2]; - -static struct platform_device orion_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .dev = { - .platform_data = &orion_i2c_pdata, - }, -}; - -static struct mv64xxx_i2c_pdata orion_i2c_1_pdata = { - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource orion_i2c_1_resources[2]; - -static struct platform_device orion_i2c_1 = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 1, - .dev = { - .platform_data = &orion_i2c_1_pdata, - }, -}; - -void __init orion_i2c_init(unsigned long mapbase, - unsigned long irq, - unsigned long freq_m) -{ - orion_i2c_pdata.freq_m = freq_m; - fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase, - SZ_32 - 1, irq); - platform_device_register(&orion_i2c); -} - -void __init orion_i2c_1_init(unsigned long mapbase, - unsigned long irq, - unsigned long freq_m) -{ - orion_i2c_1_pdata.freq_m = freq_m; - fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase, - SZ_32 - 1, irq); - platform_device_register(&orion_i2c_1); -} - -/***************************************************************************** - * SPI - ****************************************************************************/ -static struct resource orion_spi_resources; - -static struct platform_device orion_spi = { - .name = "orion_spi", - .id = 0, -}; - -static struct resource orion_spi_1_resources; - -static struct platform_device orion_spi_1 = { - .name = "orion_spi", - .id = 1, -}; - -/* Note: The SPI silicon core does have interrupts. However the - * current Linux software driver does not use interrupts. */ - -void __init orion_spi_init(unsigned long mapbase) -{ - fill_resources(&orion_spi, &orion_spi_resources, - mapbase, SZ_512 - 1); - platform_device_register(&orion_spi); -} - -void __init orion_spi_1_init(unsigned long mapbase) -{ - fill_resources(&orion_spi_1, &orion_spi_1_resources, - mapbase, SZ_512 - 1); - platform_device_register(&orion_spi_1); -} - -/***************************************************************************** - * XOR - ****************************************************************************/ -static u64 orion_xor_dmamask = DMA_BIT_MASK(32); - -/***************************************************************************** - * XOR0 - ****************************************************************************/ -static struct resource orion_xor0_shared_resources[] = { - { - .name = "xor 0 low", - .flags = IORESOURCE_MEM, - }, { - .name = "xor 0 high", - .flags = IORESOURCE_MEM, - }, { - .name = "irq channel 0", - .flags = IORESOURCE_IRQ, - }, { - .name = "irq channel 1", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_channel_data orion_xor0_channels_data[2]; - -static struct mv_xor_platform_data orion_xor0_pdata = { - .channels = orion_xor0_channels_data, -}; - -static struct platform_device orion_xor0_shared = { - .name = MV_XOR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(orion_xor0_shared_resources), - .resource = orion_xor0_shared_resources, - .dev = { - .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &orion_xor0_pdata, - }, -}; - -void __init orion_xor0_init(unsigned long mapbase_low, - unsigned long mapbase_high, - unsigned long irq_0, - unsigned long irq_1) -{ - orion_xor0_shared_resources[0].start = mapbase_low; - orion_xor0_shared_resources[0].end = mapbase_low + 0xff; - orion_xor0_shared_resources[1].start = mapbase_high; - orion_xor0_shared_resources[1].end = mapbase_high + 0xff; - - orion_xor0_shared_resources[2].start = irq_0; - orion_xor0_shared_resources[2].end = irq_0; - orion_xor0_shared_resources[3].start = irq_1; - orion_xor0_shared_resources[3].end = irq_1; - - dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[0].cap_mask); - dma_cap_set(DMA_XOR, orion_xor0_channels_data[0].cap_mask); - - dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[1].cap_mask); - dma_cap_set(DMA_XOR, orion_xor0_channels_data[1].cap_mask); - - platform_device_register(&orion_xor0_shared); -} - -/***************************************************************************** - * XOR1 - ****************************************************************************/ -static struct resource orion_xor1_shared_resources[] = { - { - .name = "xor 1 low", - .flags = IORESOURCE_MEM, - }, { - .name = "xor 1 high", - .flags = IORESOURCE_MEM, - }, { - .name = "irq channel 0", - .flags = IORESOURCE_IRQ, - }, { - .name = "irq channel 1", - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv_xor_channel_data orion_xor1_channels_data[2]; - -static struct mv_xor_platform_data orion_xor1_pdata = { - .channels = orion_xor1_channels_data, -}; - -static struct platform_device orion_xor1_shared = { - .name = MV_XOR_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(orion_xor1_shared_resources), - .resource = orion_xor1_shared_resources, - .dev = { - .dma_mask = &orion_xor_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &orion_xor1_pdata, - }, -}; - -void __init orion_xor1_init(unsigned long mapbase_low, - unsigned long mapbase_high, - unsigned long irq_0, - unsigned long irq_1) -{ - orion_xor1_shared_resources[0].start = mapbase_low; - orion_xor1_shared_resources[0].end = mapbase_low + 0xff; - orion_xor1_shared_resources[1].start = mapbase_high; - orion_xor1_shared_resources[1].end = mapbase_high + 0xff; - - orion_xor1_shared_resources[2].start = irq_0; - orion_xor1_shared_resources[2].end = irq_0; - orion_xor1_shared_resources[3].start = irq_1; - orion_xor1_shared_resources[3].end = irq_1; - - dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[0].cap_mask); - dma_cap_set(DMA_XOR, orion_xor1_channels_data[0].cap_mask); - - dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[1].cap_mask); - dma_cap_set(DMA_XOR, orion_xor1_channels_data[1].cap_mask); - - platform_device_register(&orion_xor1_shared); -} - -/***************************************************************************** - * EHCI - ****************************************************************************/ -static struct orion_ehci_data orion_ehci_data; -static u64 ehci_dmamask = DMA_BIT_MASK(32); - - -/***************************************************************************** - * EHCI0 - ****************************************************************************/ -static struct resource orion_ehci_resources[2]; - -static struct platform_device orion_ehci = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &orion_ehci_data, - }, -}; - -void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq, - enum orion_ehci_phy_ver phy_version) -{ - orion_ehci_data.phy_version = phy_version; - fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, - irq); - - platform_device_register(&orion_ehci); -} - -/***************************************************************************** - * EHCI1 - ****************************************************************************/ -static struct resource orion_ehci_1_resources[2]; - -static struct platform_device orion_ehci_1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &orion_ehci_data, - }, -}; - -void __init orion_ehci_1_init(unsigned long mapbase, - unsigned long irq) -{ - fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources, - mapbase, SZ_4K - 1, irq); - - platform_device_register(&orion_ehci_1); -} - -/***************************************************************************** - * EHCI2 - ****************************************************************************/ -static struct resource orion_ehci_2_resources[2]; - -static struct platform_device orion_ehci_2 = { - .name = "orion-ehci", - .id = 2, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &orion_ehci_data, - }, -}; - -void __init orion_ehci_2_init(unsigned long mapbase, - unsigned long irq) -{ - fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources, - mapbase, SZ_4K - 1, irq); - - platform_device_register(&orion_ehci_2); -} - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct resource orion_sata_resources[2] = { - { - .name = "sata base", - }, { - .name = "sata irq", - }, -}; - -static struct platform_device orion_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data, - unsigned long mapbase, - unsigned long irq) -{ - orion_sata.dev.platform_data = sata_data; - fill_resources_irq(&orion_sata, orion_sata_resources, - mapbase, 0x5000 - 1, irq); - - platform_device_register(&orion_sata); -} - -/***************************************************************************** - * Cryptographic Engines and Security Accelerator (CESA) - ****************************************************************************/ -static struct resource orion_crypto_resources[] = { - { - .name = "regs", - }, { - .name = "crypto interrupt", - }, { - .name = "sram", - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device orion_crypto = { - .name = "mv_crypto", - .id = -1, -}; - -void __init orion_crypto_init(unsigned long mapbase, - unsigned long srambase, - unsigned long sram_size, - unsigned long irq) -{ - fill_resources_irq(&orion_crypto, orion_crypto_resources, - mapbase, 0xffff, irq); - orion_crypto.num_resources = 3; - orion_crypto_resources[2].start = srambase; - orion_crypto_resources[2].end = srambase + sram_size - 1; - - platform_device_register(&orion_crypto); -} diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h deleted file mode 100644 index b76c06569fe5..000000000000 --- a/arch/arm/plat-orion/include/plat/addr-map.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/plat-orion/include/plat/addr-map.h - * - * Marvell Orion SoC address map handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_ADDR_MAP_H -#define __PLAT_ADDR_MAP_H - -extern struct mbus_dram_target_info orion_mbus_dram_info; - -struct orion_addr_map_cfg { - const int num_wins; /* Total number of windows */ - const int remappable_wins; - void __iomem *bridge_virt_base; - int hw_io_coherency; - - /* If NULL, the default cpu_win_can_remap will be used, using - the value in remappable_wins */ - int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg, - const int win); - /* If NULL, the default win_cfg_base will be used, using the - value in bridge_virt_base */ - void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg, - const int win); -}; - -/* - * Information needed to setup one address mapping. - */ -struct orion_addr_map_info { - const int win; - const u32 base; - const u32 size; - const u8 target; - const u8 attr; - const int remap; -}; - -void __init orion_config_wins(struct orion_addr_map_cfg *cfg, - const struct orion_addr_map_info *info); - -void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, - const int win, const u32 base, - const u32 size, const u8 target, - const u8 attr, const int remap); - -void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - const void __iomem *ddr_window_cpu_base); -#endif diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h deleted file mode 100644 index d2aad95d20cb..000000000000 --- a/arch/arm/plat-orion/include/plat/common.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * arch/arm/plat-orion/include/plat/common.h - * - * Marvell Orion SoC common setup code used by different mach-/common.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_COMMON_H -#include <linux/mv643xx_eth.h> -#include <linux/platform_data/usb-ehci-orion.h> - -struct mv_sata_platform_data; - -void __init orion_uart0_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk); - -void __init orion_uart1_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk); - -void __init orion_uart2_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk); - -void __init orion_uart3_init(void __iomem *membase, - resource_size_t mapbase, - unsigned int irq, - struct clk *clk); - -void __init orion_rtc_init(unsigned long mapbase, - unsigned long irq); - -void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq, - unsigned long irq_err, - unsigned int tx_csum_limit); - -void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq, - unsigned int tx_csum_limit); - -void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq); - -void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, - unsigned long mapbase, - unsigned long irq); - -void __init orion_i2c_init(unsigned long mapbase, - unsigned long irq, - unsigned long freq_m); - -void __init orion_i2c_1_init(unsigned long mapbase, - unsigned long irq, - unsigned long freq_m); - -void __init orion_spi_init(unsigned long mapbase); - -void __init orion_spi_1_init(unsigned long mapbase); - -void __init orion_xor0_init(unsigned long mapbase_low, - unsigned long mapbase_high, - unsigned long irq_0, - unsigned long irq_1); - -void __init orion_xor1_init(unsigned long mapbase_low, - unsigned long mapbase_high, - unsigned long irq_0, - unsigned long irq_1); - -void __init orion_ehci_init(unsigned long mapbase, - unsigned long irq, - enum orion_ehci_phy_ver phy_version); - -void __init orion_ehci_1_init(unsigned long mapbase, - unsigned long irq); - -void __init orion_ehci_2_init(unsigned long mapbase, - unsigned long irq); - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data, - unsigned long mapbase, - unsigned long irq); - -void __init orion_crypto_init(unsigned long mapbase, - unsigned long srambase, - unsigned long sram_size, - unsigned long irq); - -void __init orion_clkdev_add(const char *con_id, const char *dev_id, - struct clk *clk); - -void __init orion_clkdev_init(struct clk *tclk); -#endif diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h deleted file mode 100644 index 07527e417c62..000000000000 --- a/arch/arm/plat-orion/include/plat/time.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-orion/include/plat/time.h - * - * Marvell Orion SoC time handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_TIME_H -#define __PLAT_TIME_H - -void orion_time_set_base(void __iomem *timer_base); - -void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask, - unsigned int irq, unsigned int tclk); - - -#endif diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index 8b8c06d2e9c4..e817f20409c4 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -13,7 +13,6 @@ #include <linux/mbus.h> #include <asm/mach/pci.h> #include <plat/pcie.h> -#include <plat/addr-map.h> #include <linux/delay.h> /* diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c deleted file mode 100644 index 509d4824dc1c..000000000000 --- a/arch/arm/plat-orion/time.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * arch/arm/plat-orion/time.c - * - * Marvell Orion SoC timer handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Timer 0 is used as free-running clocksource, while timer 1 is - * used as clock_event_device. - */ - -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/sched_clock.h> -#include <plat/time.h> -#include <asm/delay.h> - -/* - * MBus bridge block registers. - */ -#define BRIDGE_CAUSE_OFF 0x0110 -#define BRIDGE_MASK_OFF 0x0114 -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 - - -/* - * Timer block registers. - */ -#define TIMER_CTRL_OFF 0x0000 -#define TIMER0_EN 0x0001 -#define TIMER0_RELOAD_EN 0x0002 -#define TIMER1_EN 0x0004 -#define TIMER1_RELOAD_EN 0x0008 -#define TIMER0_RELOAD_OFF 0x0010 -#define TIMER0_VAL_OFF 0x0014 -#define TIMER1_RELOAD_OFF 0x0018 -#define TIMER1_VAL_OFF 0x001c - - -/* - * SoC-specific data. - */ -static void __iomem *bridge_base; -static u32 bridge_timer1_clr_mask; -static void __iomem *timer_base; - - -/* - * Number of timer ticks per jiffy. - */ -static u32 ticks_per_jiffy; - - -/* - * Orion's sched_clock implementation. It has a resolution of - * at least 7.5ns (133MHz TCLK). - */ - -static u64 notrace orion_read_sched_clock(void) -{ - return ~readl(timer_base + TIMER0_VAL_OFF); -} - -/* - * Clockevent handling. - */ -static int -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long flags; - u32 u; - - if (delta == 0) - return -ETIME; - - local_irq_save(flags); - - /* - * Clear and enable clockevent timer interrupt. - */ - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); - - u = readl(bridge_base + BRIDGE_MASK_OFF); - u |= BRIDGE_INT_TIMER1; - writel(u, bridge_base + BRIDGE_MASK_OFF); - - /* - * Setup new clockevent timer value. - */ - writel(delta, timer_base + TIMER1_VAL_OFF); - - /* - * Enable the timer. - */ - u = readl(timer_base + TIMER_CTRL_OFF); - u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; - writel(u, timer_base + TIMER_CTRL_OFF); - - local_irq_restore(flags); - - return 0; -} - -static int orion_clkevt_shutdown(struct clock_event_device *evt) -{ - unsigned long flags; - u32 u; - - local_irq_save(flags); - - /* Disable timer */ - u = readl(timer_base + TIMER_CTRL_OFF); - writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF); - - /* Disable timer interrupt */ - u = readl(bridge_base + BRIDGE_MASK_OFF); - writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); - - /* ACK pending timer interrupt */ - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); - - local_irq_restore(flags); - - return 0; -} - -static int orion_clkevt_set_periodic(struct clock_event_device *evt) -{ - unsigned long flags; - u32 u; - - local_irq_save(flags); - - /* Setup timer to fire at 1/HZ intervals */ - writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF); - writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF); - - /* Enable timer interrupt */ - u = readl(bridge_base + BRIDGE_MASK_OFF); - writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); - - /* Enable timer */ - u = readl(timer_base + TIMER_CTRL_OFF); - writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF); - - local_irq_restore(flags); - - return 0; -} - -static struct clock_event_device orion_clkevt = { - .name = "orion_tick", - .features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_PERIODIC, - .rating = 300, - .set_next_event = orion_clkevt_next_event, - .set_state_shutdown = orion_clkevt_shutdown, - .set_state_periodic = orion_clkevt_set_periodic, - .set_state_oneshot = orion_clkevt_shutdown, - .tick_resume = orion_clkevt_shutdown, -}; - -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) -{ - /* - * ACK timer interrupt and call event handler. - */ - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); - orion_clkevt.event_handler(&orion_clkevt); - - return IRQ_HANDLED; -} - -void __init -orion_time_set_base(void __iomem *_timer_base) -{ - timer_base = _timer_base; -} - -static unsigned long orion_delay_timer_read(void) -{ - return ~readl(timer_base + TIMER0_VAL_OFF); -} - -static struct delay_timer orion_delay_timer = { - .read_current_timer = orion_delay_timer_read, -}; - -void __init -orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, - unsigned int irq, unsigned int tclk) -{ - u32 u; - - /* - * Set SoC-specific data. - */ - bridge_base = _bridge_base; - bridge_timer1_clr_mask = _bridge_timer1_clr_mask; - - ticks_per_jiffy = (tclk + HZ/2) / HZ; - - orion_delay_timer.freq = tclk; - register_current_timer_delay(&orion_delay_timer); - - /* - * Set scale and timer for sched_clock. - */ - sched_clock_register(orion_read_sched_clock, 32, tclk); - - /* - * Setup free-running clocksource timer (interrupts - * disabled). - */ - writel(0xffffffff, timer_base + TIMER0_VAL_OFF); - writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); - u = readl(bridge_base + BRIDGE_MASK_OFF); - writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF); - u = readl(timer_base + TIMER_CTRL_OFF); - writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF); - clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource", - tclk, 300, 32, clocksource_mmio_readl_down); - - /* - * Setup clockevent timer (interrupt-driven). - */ - if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick", - NULL)) - pr_err("Failed to request irq %u (orion_tick)\n", irq); - orion_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe); -} diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 28ca856ecc75..434cce3efd96 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -471,8 +471,7 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" - depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ - ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + depends on PCI || ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST select GENERIC_PHY select SATA_HOST help diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 4f060d3e5636..d06903635335 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -330,7 +330,7 @@ config MMC_SDHCI_ESDHC_IMX config MMC_SDHCI_DOVE tristate "SDHCI support on Marvell's Dove SoC" - depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST + depends on MACH_DOVE || COMPILE_TEST depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS help diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index d246bbe37948..7e550c474b7a 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -197,7 +197,7 @@ config PCI_LOONGSON config PCI_MVEBU tristate "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST + depends on ARCH_MVEBU || COMPILE_TEST depends on MVEBU_MBUS depends on ARM depends on OF diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index bccd72dccb77..c29d2d28ae55 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -77,7 +77,7 @@ config PHY_MVEBU_CP110_UTMI config PHY_MVEBU_SATA def_bool y - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD + depends on MACH_DOVE || MACH_KIRKWOOD depends on OF select GENERIC_PHY diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 55ffee3d75ce..5cb6cdfe6015 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1703,7 +1703,7 @@ config RTC_DRV_STARFIRE config RTC_DRV_MV tristate "Marvell SoC RTC" - depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST + depends on ARCH_MVEBU || COMPILE_TEST help If you say yes here you will get support for the in-chip RTC that can be found in some of Marvell's SoC devices, such as diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index c9e689080ceb..6411b96d584c 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_ARCH_AT91) += atmel/ obj-y += bcm/ obj-$(CONFIG_ARCH_CANAAN) += canaan/ obj-$(CONFIG_EP93XX_SOC) += cirrus/ -obj-$(CONFIG_ARCH_DOVE) += dove/ obj-$(CONFIG_MACH_DOVE) += dove/ obj-y += fsl/ obj-y += fujitsu/ diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 810eeccedfba..8cef9b658191 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -391,7 +391,7 @@ config KIRKWOOD_THERMAL config DOVE_THERMAL tristate "Temperature sensor on Marvell Dove SoCs" - depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST + depends on MACH_DOVE || COMPILE_TEST depends on HAS_IOMEM depends on OF help diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0ab0dcc6d27d..d83bfb189705 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -690,7 +690,7 @@ config K3_RTI_WATCHDOG config ORION_WATCHDOG tristate "Orion watchdog" - depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST + depends on ARCH_ORION5X || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST depends on ARM select WATCHDOG_CORE help diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig index 924072e402c8..d59c5bb0b391 100644 --- a/sound/soc/kirkwood/Kconfig +++ b/sound/soc/kirkwood/Kconfig @@ -3,7 +3,7 @@ menu "Kirkwood" config SND_KIRKWOOD_SOC tristate "SoC Audio for the Marvell Kirkwood and Dove chips" - depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST + depends on ARCH_MVEBU || COMPILE_TEST help Say Y or M if you want to add support for codecs attached to the Kirkwood I2S interface. You will also need to select the -- 2.53.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann @ 2026-09-08 15:34 ` Mark Brown 2026-09-08 16:12 ` Ulf Hansson ` (6 subsequent siblings) 7 siblings, 0 replies; 9+ messages in thread From: Mark Brown @ 2026-09-08 15:34 UTC (permalink / raw) To: Arnd Bergmann Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio [-- Attachment #1: Type: text/plain, Size: 388 bytes --] On Tue, Sep 08, 2026 at 05:27:55PM +0200, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. Acked-by: Mark Brown <broonie@kernel.org> [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann 2026-09-08 15:34 ` Mark Brown @ 2026-09-08 16:12 ` Ulf Hansson 2026-09-08 16:18 ` Andrew Lunn ` (5 subsequent siblings) 7 siblings, 0 replies; 9+ messages in thread From: Ulf Hansson @ 2026-09-08 16:12 UTC (permalink / raw) To: Arnd Bergmann Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On Tue, Sep 8, 2026 at 5:29 PM Arnd Bergmann <arnd@kernel.org> wrote: > > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Gregory Clement <gregory.clement@bootlin.com> > Cc: Alexander Clouter <alex@digriz.org.uk> > Cc: Jeremy J. Peper <jeremy@jeremypeper.com> > Cc: Damien Le Moal <dlemoal@kernel.org> > Cc: Niklas Cassel <cassel@kernel.org> > Cc: Ulf Hansson <ulfh@kernel.org> > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> > Cc: Manivannan Sadhasivam <mani@kernel.org> > Cc: Rob Herring <robh@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@kernel.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Mark Brown <broonie@kernel.org> > Cc: Linus Walleij <linusw@kernel.org> > Cc: Bartosz Golaszewski <brgl@kernel.org> > Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> > Cc: linux-ide@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-rtc@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-watchdog@vger.kernel.org > Cc: linux-sound@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulfh@kernel.org> # For MMC Kind regards Uffe > --- > MAINTAINERS | 2 - > arch/arm/Kconfig | 2 - > arch/arm/Kconfig.debug | 2 +- > arch/arm/Makefile | 2 - > arch/arm/configs/dove_defconfig | 134 --- > arch/arm/configs/mv78xx0_defconfig | 120 --- > arch/arm/mach-dove/Kconfig | 32 - > arch/arm/mach-dove/Makefile | 7 - > arch/arm/mach-dove/bridge-regs.h | 50 -- > arch/arm/mach-dove/cm-a510.c | 94 -- > arch/arm/mach-dove/common.c | 449 ---------- > arch/arm/mach-dove/common.h | 46 - > arch/arm/mach-dove/dove.h | 185 ---- > arch/arm/mach-dove/irq.c | 81 -- > arch/arm/mach-dove/irqs.h | 89 -- > arch/arm/mach-dove/mpp.c | 159 ---- > arch/arm/mach-dove/mpp.h | 197 ----- > arch/arm/mach-dove/pcie.c | 226 ----- > arch/arm/mach-dove/pm.h | 58 -- > arch/arm/mach-mv78xx0/Kconfig | 27 - > arch/arm/mach-mv78xx0/Makefile | 5 - > arch/arm/mach-mv78xx0/bridge-regs.h | 31 - > arch/arm/mach-mv78xx0/buffalo-wxl-setup.c | 183 ---- > arch/arm/mach-mv78xx0/common.c | 444 ---------- > arch/arm/mach-mv78xx0/common.h | 54 -- > arch/arm/mach-mv78xx0/irq.c | 69 -- > arch/arm/mach-mv78xx0/irqs.h | 87 -- > arch/arm/mach-mv78xx0/mpp.c | 34 - > arch/arm/mach-mv78xx0/mpp.h | 337 ------- > arch/arm/mach-mv78xx0/mv78xx0.h | 134 --- > arch/arm/mach-mv78xx0/pcie.c | 280 ------ > arch/arm/mach-orion5x/Kconfig | 95 -- > arch/arm/mach-orion5x/Makefile | 9 - > arch/arm/mach-orion5x/board-dt.c | 3 +- > arch/arm/mach-orion5x/common.c | 238 +---- > arch/arm/mach-orion5x/common.h | 15 - > arch/arm/mach-orion5x/dns323-setup.c | 757 ---------------- > arch/arm/mach-orion5x/kurobox_pro-setup.c | 407 --------- > arch/arm/mach-orion5x/mv2120-setup.c | 256 ------ > arch/arm/mach-orion5x/net2big-setup.c | 444 ---------- > arch/arm/mach-orion5x/pci.c | 1 - > .../arm/mach-orion5x/terastation_pro2-setup.c | 366 -------- > arch/arm/mach-orion5x/ts209-setup.c | 331 ------- > arch/arm/mach-orion5x/ts409-setup.c | 329 ------- > arch/arm/mach-orion5x/ts78xx-fpga.h | 42 - > arch/arm/mach-orion5x/ts78xx-setup.c | 574 ------------ > arch/arm/mach-orion5x/tsx09-common.c | 129 --- > arch/arm/mach-orion5x/tsx09-common.h | 21 - > arch/arm/mm/Kconfig | 2 +- > arch/arm/plat-orion/Makefile | 2 +- > arch/arm/plat-orion/common.c | 826 ------------------ > arch/arm/plat-orion/include/plat/addr-map.h | 54 -- > arch/arm/plat-orion/include/plat/common.h | 104 --- > arch/arm/plat-orion/include/plat/time.h | 20 - > arch/arm/plat-orion/pcie.c | 1 - > arch/arm/plat-orion/time.c | 238 ----- > drivers/ata/Kconfig | 3 +- > drivers/mmc/host/Kconfig | 2 +- > drivers/pci/controller/Kconfig | 2 +- > drivers/phy/marvell/Kconfig | 2 +- > drivers/rtc/Kconfig | 2 +- > drivers/soc/Makefile | 1 - > drivers/thermal/Kconfig | 2 +- > drivers/watchdog/Kconfig | 2 +- > sound/soc/kirkwood/Kconfig | 2 +- > 65 files changed, 14 insertions(+), 8888 deletions(-) > delete mode 100644 arch/arm/configs/dove_defconfig > delete mode 100644 arch/arm/configs/mv78xx0_defconfig > delete mode 100644 arch/arm/mach-dove/Kconfig > delete mode 100644 arch/arm/mach-dove/Makefile > delete mode 100644 arch/arm/mach-dove/bridge-regs.h > delete mode 100644 arch/arm/mach-dove/cm-a510.c > delete mode 100644 arch/arm/mach-dove/common.c > delete mode 100644 arch/arm/mach-dove/common.h > delete mode 100644 arch/arm/mach-dove/dove.h > delete mode 100644 arch/arm/mach-dove/irq.c > delete mode 100644 arch/arm/mach-dove/irqs.h > delete mode 100644 arch/arm/mach-dove/mpp.c > delete mode 100644 arch/arm/mach-dove/mpp.h > delete mode 100644 arch/arm/mach-dove/pcie.c > delete mode 100644 arch/arm/mach-dove/pm.h > delete mode 100644 arch/arm/mach-mv78xx0/Kconfig > delete mode 100644 arch/arm/mach-mv78xx0/Makefile > delete mode 100644 arch/arm/mach-mv78xx0/bridge-regs.h > delete mode 100644 arch/arm/mach-mv78xx0/buffalo-wxl-setup.c > delete mode 100644 arch/arm/mach-mv78xx0/common.c > delete mode 100644 arch/arm/mach-mv78xx0/common.h > delete mode 100644 arch/arm/mach-mv78xx0/irq.c > delete mode 100644 arch/arm/mach-mv78xx0/irqs.h > delete mode 100644 arch/arm/mach-mv78xx0/mpp.c > delete mode 100644 arch/arm/mach-mv78xx0/mpp.h > delete mode 100644 arch/arm/mach-mv78xx0/mv78xx0.h > delete mode 100644 arch/arm/mach-mv78xx0/pcie.c > delete mode 100644 arch/arm/mach-orion5x/dns323-setup.c > delete mode 100644 arch/arm/mach-orion5x/kurobox_pro-setup.c > delete mode 100644 arch/arm/mach-orion5x/mv2120-setup.c > delete mode 100644 arch/arm/mach-orion5x/net2big-setup.c > delete mode 100644 arch/arm/mach-orion5x/terastation_pro2-setup.c > delete mode 100644 arch/arm/mach-orion5x/ts209-setup.c > delete mode 100644 arch/arm/mach-orion5x/ts409-setup.c > delete mode 100644 arch/arm/mach-orion5x/ts78xx-fpga.h > delete mode 100644 arch/arm/mach-orion5x/ts78xx-setup.c > delete mode 100644 arch/arm/mach-orion5x/tsx09-common.c > delete mode 100644 arch/arm/mach-orion5x/tsx09-common.h > delete mode 100644 arch/arm/plat-orion/common.c > delete mode 100644 arch/arm/plat-orion/include/plat/addr-map.h > delete mode 100644 arch/arm/plat-orion/include/plat/common.h > delete mode 100644 arch/arm/plat-orion/include/plat/time.h > delete mode 100644 arch/arm/plat-orion/time.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 6e8fe7640064..028db7ad15ad 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3080,8 +3080,6 @@ F: Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.yaml > F: Documentation/devicetree/bindings/soc/dove/ > F: arch/arm/boot/dts/marvell/dove* > F: arch/arm/boot/dts/marvell/orion5x* > -F: arch/arm/mach-dove/ > -F: arch/arm/mach-mv78xx0/ > F: arch/arm/mach-orion5x/ > F: arch/arm/plat-orion/ > F: drivers/bus/mvebu-mbus.c > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 5770deca136d..da29afce309f 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -393,8 +393,6 @@ source "arch/arm/mach-mmp/Kconfig" > > source "arch/arm/mach-mstar/Kconfig" > > -source "arch/arm/mach-mv78xx0/Kconfig" > - > source "arch/arm/mach-mvebu/Kconfig" > > source "arch/arm/mach-mxs/Kconfig" > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 56c090840c5a..e2fc89055463 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -583,7 +583,7 @@ choice > > config DEBUG_MVEBU_UART0_ALTERNATE > bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" > - depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X > + depends on ARCH_MVEBU || ARCH_ORION5X > select DEBUG_UART_8250 > help > Say Y here if you want kernel low-level debugging support > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index f5bc9ad7f6f5..5421a3ec3825 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin > machine-$(CONFIG_ARCH_CLPS711X) += clps711x > machine-$(CONFIG_ARCH_DAVINCI) += davinci > machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor > -machine-$(CONFIG_ARCH_DOVE) += dove > machine-$(CONFIG_ARCH_EXYNOS) += exynos > machine-$(CONFIG_ARCH_GEMINI) += gemini > machine-$(CONFIG_ARCH_HIGHBANK) += highbank > @@ -190,7 +189,6 @@ machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx > machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx > machine-$(CONFIG_ARCH_MESON) += meson > machine-$(CONFIG_ARCH_MMP) += mmp > -machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 > machine-$(CONFIG_ARCH_MVEBU) += mvebu > machine-$(CONFIG_ARCH_MXC) += imx > machine-$(CONFIG_ARCH_MEDIATEK) += mediatek > diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig > deleted file mode 100644 > index 917a864fec74..000000000000 > --- a/arch/arm/configs/dove_defconfig > +++ /dev/null > @@ -1,134 +0,0 @@ > -CONFIG_SYSVIPC=y > -CONFIG_NO_HZ_IDLE=y > -CONFIG_HIGH_RES_TIMERS=y > -CONFIG_LOG_BUF_SHIFT=14 > -CONFIG_EXPERT=y > -# CONFIG_ARCH_MULTI_V6 is not set > -CONFIG_ARCH_MULTI_V7=y > -CONFIG_ARCH_DOVE=y > -CONFIG_MACH_CM_A510=y > -CONFIG_HIGHMEM=y > -CONFIG_ATAGS=y > -CONFIG_ARM_APPENDED_DTB=y > -CONFIG_ARM_ATAG_DTB_COMPAT=y > -CONFIG_VFP=y > -CONFIG_MODULES=y > -CONFIG_MODULE_UNLOAD=y > -CONFIG_PARTITION_ADVANCED=y > -CONFIG_NET=y > -CONFIG_PACKET=y > -CONFIG_UNIX=y > -CONFIG_INET=y > -CONFIG_IP_MULTICAST=y > -CONFIG_IP_PNP=y > -CONFIG_IP_PNP_DHCP=y > -CONFIG_IP_PNP_BOOTP=y > -# CONFIG_IPV6 is not set > -CONFIG_PCI=y > -CONFIG_PCI_MSI=y > -CONFIG_PCI_MVEBU=y > -CONFIG_DEVTMPFS=y > -CONFIG_DEVTMPFS_MOUNT=y > -CONFIG_MTD=y > -CONFIG_MTD_CMDLINE_PARTS=y > -CONFIG_MTD_BLOCK=y > -CONFIG_MTD_CFI=y > -CONFIG_MTD_JEDECPROBE=y > -CONFIG_MTD_CFI_ADV_OPTIONS=y > -CONFIG_MTD_CFI_GEOMETRY=y > -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set > -CONFIG_MTD_CFI_INTELEXT=y > -CONFIG_MTD_CFI_STAA=y > -CONFIG_MTD_PHYSMAP=y > -CONFIG_MTD_M25P80=y > -CONFIG_MTD_SPI_NOR=y > -CONFIG_BLK_DEV_LOOP=y > -CONFIG_BLK_DEV_RAM=y > -CONFIG_BLK_DEV_RAM_COUNT=1 > -# CONFIG_SCSI_PROC_FS is not set > -CONFIG_BLK_DEV_SD=y > -# CONFIG_BLK_DEV_BSG is not set > -# CONFIG_SCSI_LOWLEVEL is not set > -CONFIG_ATA=y > -CONFIG_SATA_MV=y > -CONFIG_NETDEVICES=y > -CONFIG_MV643XX_ETH=y > -# CONFIG_INPUT_MOUSEDEV is not set > -CONFIG_INPUT_EVDEV=y > -# CONFIG_KEYBOARD_ATKBD is not set > -# CONFIG_MOUSE_PS2 is not set > -# CONFIG_SERIO is not set > -CONFIG_LEGACY_PTY_COUNT=16 > -CONFIG_SERIAL_8250=y > -CONFIG_SERIAL_8250_CONSOLE=y > -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 > -CONFIG_SERIAL_OF_PLATFORM=y > -# CONFIG_HW_RANDOM is not set > -CONFIG_I2C=y > -CONFIG_I2C_CHARDEV=y > -CONFIG_I2C_MV64XXX=y > -CONFIG_SPI=y > -CONFIG_SPI_ORION=y > -# CONFIG_HWMON is not set > -CONFIG_THERMAL=y > -CONFIG_DOVE_THERMAL=y > -CONFIG_WATCHDOG=y > -CONFIG_ORION_WATCHDOG=y > -CONFIG_USB=y > -CONFIG_USB_XHCI_HCD=y > -CONFIG_USB_EHCI_HCD=y > -CONFIG_USB_EHCI_ROOT_HUB_TT=y > -CONFIG_USB_STORAGE=y > -CONFIG_MMC=y > -CONFIG_MMC_SDHCI=y > -CONFIG_MMC_SDHCI_PLTFM=y > -CONFIG_MMC_SDHCI_DOVE=y > -CONFIG_NEW_LEDS=y > -CONFIG_LEDS_CLASS=y > -CONFIG_LEDS_GPIO=y > -CONFIG_LEDS_TRIGGERS=y > -CONFIG_LEDS_TRIGGER_TIMER=y > -CONFIG_LEDS_TRIGGER_HEARTBEAT=y > -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y > -CONFIG_RTC_CLASS=y > -CONFIG_RTC_DRV_MV=y > -CONFIG_DMADEVICES=y > -CONFIG_MV_XOR=y > -CONFIG_EXT2_FS=y > -CONFIG_EXT4_FS=y > -# CONFIG_EXT4_FS_XATTR is not set > -CONFIG_ISO9660_FS=y > -CONFIG_JOLIET=y > -CONFIG_UDF_FS=m > -CONFIG_MSDOS_FS=y > -CONFIG_VFAT_FS=y > -CONFIG_TMPFS=y > -CONFIG_JFFS2_FS=y > -CONFIG_NFS_FS=y > -CONFIG_ROOT_NFS=y > -CONFIG_NLS_CODEPAGE_437=y > -CONFIG_NLS_CODEPAGE_850=y > -CONFIG_NLS_ISO8859_1=y > -CONFIG_NLS_ISO8859_2=y > -CONFIG_NLS_UTF8=y > -CONFIG_TIMER_STATS=y > -CONFIG_CRYPTO_NULL=y > -CONFIG_CRYPTO_BLOWFISH=y > -CONFIG_CRYPTO_TEA=y > -CONFIG_CRYPTO_TWOFISH=y > -CONFIG_CRYPTO_ECB=m > -CONFIG_CRYPTO_HMAC=y > -CONFIG_CRYPTO_MD4=y > -CONFIG_CRYPTO_SHA1=y > -CONFIG_CRYPTO_SHA256=y > -CONFIG_CRYPTO_SHA512=y > -CONFIG_CRYPTO_DEFLATE=y > -CONFIG_CRYPTO_LZO=y > -CONFIG_CRYPTO_DEV_MARVELL_CESA=y > -CONFIG_PRINTK_TIME=y > -# CONFIG_DEBUG_BUGVERBOSE is not set > -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y > -CONFIG_MAGIC_SYSRQ=y > -CONFIG_DEBUG_FS=y > -# CONFIG_SCHED_DEBUG is not set > -CONFIG_DEBUG_USER=y > diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig > deleted file mode 100644 > index e3cc8de7c1c2..000000000000 > --- a/arch/arm/configs/mv78xx0_defconfig > +++ /dev/null > @@ -1,120 +0,0 @@ > -CONFIG_SYSVIPC=y > -CONFIG_NO_HZ_IDLE=y > -CONFIG_HIGH_RES_TIMERS=y > -CONFIG_PREEMPT=y > -CONFIG_LOG_BUF_SHIFT=14 > -CONFIG_EXPERT=y > -CONFIG_KALLSYMS_ALL=y > -CONFIG_PROFILING=y > -CONFIG_ARCH_MULTI_V5=y > -# CONFIG_ARCH_MULTI_V6 is not set > -# CONFIG_ARCH_MULTI_V7 is not set > -CONFIG_ARCH_MV78XX0=y > -CONFIG_MACH_TERASTATION_WXL=y > -CONFIG_HIGHMEM=y > -CONFIG_ATAGS=y > -CONFIG_VFP=y > -CONFIG_KPROBES=y > -CONFIG_MODULES=y > -CONFIG_MODULE_UNLOAD=y > -CONFIG_PARTITION_ADVANCED=y > -CONFIG_BSD_DISKLABEL=y > -CONFIG_NET=y > -CONFIG_PACKET=y > -CONFIG_UNIX=y > -CONFIG_INET=y > -CONFIG_IP_MULTICAST=y > -CONFIG_IP_PNP=y > -CONFIG_IP_PNP_DHCP=y > -CONFIG_IP_PNP_BOOTP=y > -# CONFIG_IPV6 is not set > -CONFIG_NET_PKTGEN=m > -CONFIG_MTD=y > -CONFIG_MTD_CMDLINE_PARTS=y > -CONFIG_MTD_BLOCK=y > -CONFIG_MTD_CFI=y > -CONFIG_MTD_JEDECPROBE=y > -CONFIG_MTD_CFI_ADV_OPTIONS=y > -CONFIG_MTD_CFI_GEOMETRY=y > -CONFIG_MTD_CFI_INTELEXT=y > -CONFIG_MTD_CFI_AMDSTD=y > -CONFIG_MTD_PHYSMAP=y > -CONFIG_MTD_RAW_NAND=y > -CONFIG_MTD_NAND_ORION=y > -CONFIG_BLK_DEV_LOOP=y > -# CONFIG_SCSI_PROC_FS is not set > -CONFIG_BLK_DEV_SD=y > -CONFIG_BLK_DEV_SR=m > -CONFIG_CHR_DEV_SG=m > -# CONFIG_BLK_DEV_BSG is not set > -CONFIG_ATA=y > -CONFIG_SATA_MV=y > -CONFIG_NETDEVICES=y > -CONFIG_MII=y > -CONFIG_NET_PCI=y > -CONFIG_MV643XX_ETH=y > -# CONFIG_INPUT_MOUSEDEV is not set > -CONFIG_MARVELL_PHY=y > -CONFIG_INPUT_EVDEV=y > -# CONFIG_INPUT_KEYBOARD is not set > -# CONFIG_INPUT_MOUSE is not set > -# CONFIG_SERIO is not set > -# CONFIG_VT is not set > -CONFIG_LEGACY_PTY_COUNT=16 > -CONFIG_SERIAL_8250=y > -CONFIG_SERIAL_8250_CONSOLE=y > -# CONFIG_SERIAL_8250_PCI is not set > -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 > -# CONFIG_HW_RANDOM is not set > -CONFIG_I2C=y > -CONFIG_I2C_CHARDEV=y > -CONFIG_I2C_MV64XXX=y > -CONFIG_USB=y > -CONFIG_USB_EHCI_HCD=y > -CONFIG_USB_EHCI_ROOT_HUB_TT=y > -CONFIG_USB_EHCI_TT_NEWSCHED=y > -CONFIG_USB_PRINTER=y > -CONFIG_USB_STORAGE=y > -CONFIG_USB_STORAGE_DATAFAB=y > -CONFIG_USB_STORAGE_FREECOM=y > -CONFIG_USB_STORAGE_SDDR09=y > -CONFIG_USB_STORAGE_SDDR55=y > -CONFIG_USB_STORAGE_JUMPSHOT=y > -CONFIG_NEW_LEDS=y > -CONFIG_LEDS_CLASS=y > -CONFIG_LEDS_TRIGGERS=y > -CONFIG_LEDS_TRIGGER_TIMER=y > -CONFIG_LEDS_TRIGGER_HEARTBEAT=y > -CONFIG_RTC_CLASS=y > -CONFIG_RTC_DRV_DS1307=y > -CONFIG_RTC_DRV_RS5C372=y > -CONFIG_RTC_DRV_M41T80=y > -CONFIG_EXT2_FS=y > -CONFIG_EXT4_FS=y > -# CONFIG_EXT4_FS_XATTR is not set > -CONFIG_ISO9660_FS=m > -CONFIG_JOLIET=y > -CONFIG_UDF_FS=m > -CONFIG_MSDOS_FS=y > -CONFIG_VFAT_FS=y > -CONFIG_TMPFS=y > -CONFIG_JFFS2_FS=y > -CONFIG_CRAMFS=y > -CONFIG_NFS_FS=y > -CONFIG_NFS_V3=y > -CONFIG_ROOT_NFS=y > -CONFIG_NLS_CODEPAGE_437=y > -CONFIG_NLS_CODEPAGE_850=y > -CONFIG_NLS_ISO8859_1=y > -CONFIG_NLS_ISO8859_2=y > -CONFIG_CRYPTO_CBC=m > -CONFIG_CRYPTO_ECB=m > -# CONFIG_DEBUG_BUGVERBOSE is not set > -CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y > -CONFIG_MAGIC_SYSRQ=y > -CONFIG_DEBUG_FS=y > -CONFIG_DEBUG_KERNEL=y > -# CONFIG_SLUB_DEBUG is not set > -CONFIG_SCHEDSTATS=y > -CONFIG_DEBUG_USER=y > -CONFIG_DEBUG_LL=y > diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig > deleted file mode 100644 > index f547120e223e..000000000000 > --- a/arch/arm/mach-dove/Kconfig > +++ /dev/null > @@ -1,32 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0 > -menuconfig ARCH_DOVE > - bool "Marvell Dove (DEPRECATED)" if ARCH_MULTI_V7 > - depends on ATAGS > - select CPU_PJ4 > - select GPIOLIB > - select MVEBU_MBUS > - select PINCTRL > - select PINCTRL_DOVE > - select PLAT_ORION_LEGACY > - select PM_GENERIC_DOMAINS if PM > - select PCI_QUIRKS if PCI > - help > - Support for the Marvell Dove SoC 88AP510 using board files. > - > - Support for this machine will be removed in early 2027, unless > - there is a strong reason to keep it. Users should migrate to > - the devicetree-enabled version (CONFIG_MACH_DOVE) instead. > - > -if ARCH_DOVE > - > -config DOVE_LEGACY > - bool > - > -config MACH_CM_A510 > - bool "CompuLab CM-A510 Board" > - select DOVE_LEGACY > - help > - Say 'Y' here if you want your kernel to support the > - CompuLab CM-A510 Board. > - > -endif > diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile > deleted file mode 100644 > index 0d31390be069..000000000000 > --- a/arch/arm/mach-dove/Makefile > +++ /dev/null > @@ -1,7 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0 > -ccflags-y := -I$(srctree)/arch/arm/plat-orion/include > - > -obj-y += common.o > -obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o > -obj-$(CONFIG_PCI) += pcie.o > -obj-$(CONFIG_MACH_CM_A510) += cm-a510.o > diff --git a/arch/arm/mach-dove/bridge-regs.h b/arch/arm/mach-dove/bridge-regs.h > deleted file mode 100644 > index 6fbc152d0950..000000000000 > --- a/arch/arm/mach-dove/bridge-regs.h > +++ /dev/null > @@ -1,50 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* Mbus-L to Mbus Bridge Registers */ > - > -#ifndef __ASM_ARCH_BRIDGE_REGS_H > -#define __ASM_ARCH_BRIDGE_REGS_H > - > -#include "dove.h" > - > -#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) > - > -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) > -#define CPU_CTRL_PCIE0_LINK 0x00000001 > -#define CPU_RESET 0x00000002 > -#define CPU_CTRL_PCIE1_LINK 0x00000008 > - > -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) > -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) > -#define SOFT_RESET_OUT_EN 0x00000004 > - > -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) > -#define SOFT_RESET 0x00000001 > - > -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) > -#define BRIDGE_INT_TIMER1_CLR (~0x0004) > - > -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) > -#define IRQ_CAUSE_LOW_OFF 0x0000 > -#define IRQ_MASK_LOW_OFF 0x0004 > -#define FIQ_MASK_LOW_OFF 0x0008 > -#define ENDPOINT_MASK_LOW_OFF 0x000c > -#define IRQ_CAUSE_HIGH_OFF 0x0010 > -#define IRQ_MASK_HIGH_OFF 0x0014 > -#define FIQ_MASK_HIGH_OFF 0x0018 > -#define ENDPOINT_MASK_HIGH_OFF 0x001c > -#define PCIE_INTERRUPT_MASK_OFF 0x0020 > - > -#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF) > -#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF) > -#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF) > -#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF) > -#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF) > -#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) > -#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) > - > -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) > - > -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) > -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) > - > -#endif > diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c > deleted file mode 100644 > index beb532537c22..000000000000 > --- a/arch/arm/mach-dove/cm-a510.c > +++ /dev/null > @@ -1,94 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-dove/cm-a510.c > - * > - * Copyright (C) 2010 CompuLab, Ltd. > - * Konstantin Sinyuk <kostyas@compulab.co.il> > - * > - * Based on Marvell DB-MV88AP510-BP Development Board Setup > - */ > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/ata_platform.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/spi/spi.h> > -#include <linux/spi/flash.h> > - > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > - > -#include "dove.h" > -#include "common.h" > - > -static struct mv643xx_eth_platform_data cm_a510_ge00_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, > -}; > - > -static struct mv_sata_platform_data cm_a510_sata_data = { > - .n_ports = 1, > -}; > - > -/* > - * SPI Devices: > - * SPI0: 1M Flash Winbond w25q32bv > - */ > -static const struct flash_platform_data cm_a510_spi_flash_data = { > - .type = "w25q32bv", > -}; > - > -static struct spi_board_info __initdata cm_a510_spi_flash_info[] = { > - { > - .modalias = "m25p80", > - .platform_data = &cm_a510_spi_flash_data, > - .irq = -1, > - .max_speed_hz = 20000000, > - .bus_num = 0, > - .chip_select = 0, > - }, > -}; > - > -static int __init cm_a510_pci_init(void) > -{ > - if (machine_is_cm_a510()) > - dove_pcie_init(1, 1); > - > - return 0; > -} > - > -subsys_initcall(cm_a510_pci_init); > - > -/* Board Init */ > -static void __init cm_a510_init(void) > -{ > - /* > - * Basic Dove setup. Needs to be called early. > - */ > - dove_init(); > - > - dove_ge00_init(&cm_a510_ge00_data); > - dove_ehci0_init(); > - dove_ehci1_init(); > - dove_sata_init(&cm_a510_sata_data); > - dove_sdio0_init(); > - dove_sdio1_init(); > - dove_spi0_init(); > - dove_spi1_init(); > - dove_uart0_init(); > - dove_uart1_init(); > - dove_i2c_init(); > - spi_register_board_info(cm_a510_spi_flash_info, > - ARRAY_SIZE(cm_a510_spi_flash_info)); > -} > - > -MACHINE_START(CM_A510, "Compulab CM-A510 Board") > - .atag_offset = 0x100, > - .nr_irqs = DOVE_NR_IRQS, > - .init_machine = cm_a510_init, > - .map_io = dove_map_io, > - .init_early = dove_init_early, > - .init_irq = dove_init_irq, > - .init_time = dove_timer_init, > - .restart = dove_restart, > -MACHINE_END > diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c > deleted file mode 100644 > index 35e978514591..000000000000 > --- a/arch/arm/mach-dove/common.c > +++ /dev/null > @@ -1,449 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-dove/common.c > - * > - * Core functions for Marvell Dove 88AP510 System On Chip > - */ > - > -#include <linux/clk-provider.h> > -#include <linux/dma-mapping.h> > -#include <linux/init.h> > -#include <linux/io.h> > -#include <linux/platform_data/dma-mv_xor.h> > -#include <linux/platform_data/usb-ehci-orion.h> > -#include <linux/platform_device.h> > -#include <linux/soc/dove/pmu.h> > -#include <asm/hardware/cache-tauros2.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/map.h> > -#include <asm/mach/time.h> > -#include <plat/common.h> > -#include <plat/irq.h> > -#include <plat/time.h> > -#include "bridge-regs.h" > -#include "pm.h" > -#include "common.h" > - > -/* These can go away once Dove uses the mvebu-mbus DT binding */ > -#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4 > -#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8 > -#define DOVE_MBUS_PCIE0_IO_TARGET 0x4 > -#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0 > -#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8 > -#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8 > -#define DOVE_MBUS_PCIE1_IO_TARGET 0x8 > -#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0 > -#define DOVE_MBUS_CESA_TARGET 0x3 > -#define DOVE_MBUS_CESA_ATTR 0x1 > -#define DOVE_MBUS_BOOTROM_TARGET 0x1 > -#define DOVE_MBUS_BOOTROM_ATTR 0xfd > -#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd > -#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0 > - > -/***************************************************************************** > - * I/O Address Mapping > - ****************************************************************************/ > -static struct map_desc __maybe_unused dove_io_desc[] __initdata = { > - { > - .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, > - .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), > - .length = DOVE_SB_REGS_SIZE, > - .type = MT_DEVICE, > - }, { > - .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, > - .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), > - .length = DOVE_NB_REGS_SIZE, > - .type = MT_DEVICE, > - }, > -}; > - > -void __init dove_map_io(void) > -{ > - iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc)); > -} > - > -/***************************************************************************** > - * CLK tree > - ****************************************************************************/ > -static int dove_tclk; > - > -static DEFINE_SPINLOCK(gating_lock); > -static struct clk *tclk; > - > -static struct clk __init *dove_register_gate(const char *name, > - const char *parent, u8 bit_idx) > -{ > - return clk_register_gate(NULL, name, parent, 0, > - (void __iomem *)CLOCK_GATING_CONTROL, > - bit_idx, 0, &gating_lock); > -} > - > -static void __init dove_clk_init(void) > -{ > - struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; > - struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; > - struct clk *xor0, *xor1, *ge; > - > - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk); > - > - usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); > - usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); > - sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); > - pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); > - pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); > - sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); > - sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); > - nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); > - camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); > - i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); > - i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); > - crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); > - ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); > - pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); > - xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); > - xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); > - dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); > - ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); > - > - orion_clkdev_add(NULL, "orion_spi.0", tclk); > - orion_clkdev_add(NULL, "orion_spi.1", tclk); > - orion_clkdev_add(NULL, "orion_wdt", tclk); > - orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); > - > - orion_clkdev_add(NULL, "orion-ehci.0", usb0); > - orion_clkdev_add(NULL, "orion-ehci.1", usb1); > - orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge); > - orion_clkdev_add(NULL, "sata_mv.0", sata); > - orion_clkdev_add("0", "pcie", pex0); > - orion_clkdev_add("1", "pcie", pex1); > - orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); > - orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); > - orion_clkdev_add(NULL, "orion_nand", nand); > - orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); > - orion_clkdev_add(NULL, "mvebu-audio.0", i2s0); > - orion_clkdev_add(NULL, "mvebu-audio.1", i2s1); > - orion_clkdev_add(NULL, "mv_crypto", crypto); > - orion_clkdev_add(NULL, "dove-ac97", ac97); > - orion_clkdev_add(NULL, "dove-pdma", pdma); > - orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0); > - orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1); > -} > - > -/***************************************************************************** > - * EHCI0 > - ****************************************************************************/ > -void __init dove_ehci0_init(void) > -{ > - orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA); > -} > - > -/***************************************************************************** > - * EHCI1 > - ****************************************************************************/ > -void __init dove_ehci1_init(void) > -{ > - orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); > -} > - > -/***************************************************************************** > - * GE00 > - ****************************************************************************/ > -void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, > - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, > - 1600); > -} > - > -/***************************************************************************** > - * SoC RTC > - ****************************************************************************/ > -static void __init dove_rtc_init(void) > -{ > - orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC); > -} > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -void __init dove_sata_init(struct mv_sata_platform_data *sata_data) > -{ > - orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); > - > -} > - > -/***************************************************************************** > - * UART0 > - ****************************************************************************/ > -void __init dove_uart0_init(void) > -{ > - orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE, > - IRQ_DOVE_UART_0, tclk); > -} > - > -/***************************************************************************** > - * UART1 > - ****************************************************************************/ > -void __init dove_uart1_init(void) > -{ > - orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE, > - IRQ_DOVE_UART_1, tclk); > -} > - > -/***************************************************************************** > - * UART2 > - ****************************************************************************/ > -void __init dove_uart2_init(void) > -{ > - orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE, > - IRQ_DOVE_UART_2, tclk); > -} > - > -/***************************************************************************** > - * UART3 > - ****************************************************************************/ > -void __init dove_uart3_init(void) > -{ > - orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE, > - IRQ_DOVE_UART_3, tclk); > -} > - > -/***************************************************************************** > - * SPI > - ****************************************************************************/ > -void __init dove_spi0_init(void) > -{ > - orion_spi_init(DOVE_SPI0_PHYS_BASE); > -} > - > -void __init dove_spi1_init(void) > -{ > - orion_spi_1_init(DOVE_SPI1_PHYS_BASE); > -} > - > -/***************************************************************************** > - * I2C > - ****************************************************************************/ > -void __init dove_i2c_init(void) > -{ > - orion_i2c_init(DOVE_I2C_PHYS_BASE, IRQ_DOVE_I2C, 10); > -} > - > -/***************************************************************************** > - * Time handling > - ****************************************************************************/ > -void __init dove_init_early(void) > -{ > - orion_time_set_base(TIMER_VIRT_BASE); > - mvebu_mbus_init("marvell,dove-mbus", > - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, > - DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); > -} > - > -static int __init dove_find_tclk(void) > -{ > - return 166666667; > -} > - > -void __init dove_timer_init(void) > -{ > - dove_tclk = dove_find_tclk(); > - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, > - IRQ_DOVE_BRIDGE, dove_tclk); > -} > - > -/***************************************************************************** > - * XOR 0 > - ****************************************************************************/ > -static void __init dove_xor0_init(void) > -{ > - orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, > - IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01); > -} > - > -/***************************************************************************** > - * XOR 1 > - ****************************************************************************/ > -static void __init dove_xor1_init(void) > -{ > - orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE, > - IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11); > -} > - > -/***************************************************************************** > - * SDIO > - ****************************************************************************/ > -static u64 sdio_dmamask = DMA_BIT_MASK(32); > - > -static struct resource dove_sdio0_resources[] = { > - { > - .start = DOVE_SDIO0_PHYS_BASE, > - .end = DOVE_SDIO0_PHYS_BASE + 0xff, > - .flags = IORESOURCE_MEM, > - }, { > - .start = IRQ_DOVE_SDIO0, > - .end = IRQ_DOVE_SDIO0, > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device dove_sdio0 = { > - .name = "sdhci-dove", > - .id = 0, > - .dev = { > - .dma_mask = &sdio_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > - .resource = dove_sdio0_resources, > - .num_resources = ARRAY_SIZE(dove_sdio0_resources), > -}; > - > -void __init dove_sdio0_init(void) > -{ > - platform_device_register(&dove_sdio0); > -} > - > -static struct resource dove_sdio1_resources[] = { > - { > - .start = DOVE_SDIO1_PHYS_BASE, > - .end = DOVE_SDIO1_PHYS_BASE + 0xff, > - .flags = IORESOURCE_MEM, > - }, { > - .start = IRQ_DOVE_SDIO1, > - .end = IRQ_DOVE_SDIO1, > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device dove_sdio1 = { > - .name = "sdhci-dove", > - .id = 1, > - .dev = { > - .dma_mask = &sdio_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > - .resource = dove_sdio1_resources, > - .num_resources = ARRAY_SIZE(dove_sdio1_resources), > -}; > - > -void __init dove_sdio1_init(void) > -{ > - platform_device_register(&dove_sdio1); > -} > - > -void __init dove_setup_cpu_wins(void) > -{ > - /* > - * The PCIe windows will no longer be statically allocated > - * here once Dove is migrated to the pci-mvebu driver. The > - * non-PCIe windows will no longer be created here once Dove > - * fully moves to DT. > - */ > - mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET, > - DOVE_MBUS_PCIE0_IO_ATTR, > - DOVE_PCIE0_IO_PHYS_BASE, > - DOVE_PCIE0_IO_SIZE, > - DOVE_PCIE0_IO_BUS_BASE); > - mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET, > - DOVE_MBUS_PCIE1_IO_ATTR, > - DOVE_PCIE1_IO_PHYS_BASE, > - DOVE_PCIE1_IO_SIZE, > - DOVE_PCIE1_IO_BUS_BASE); > - mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET, > - DOVE_MBUS_PCIE0_MEM_ATTR, > - DOVE_PCIE0_MEM_PHYS_BASE, > - DOVE_PCIE0_MEM_SIZE); > - mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET, > - DOVE_MBUS_PCIE1_MEM_ATTR, > - DOVE_PCIE1_MEM_PHYS_BASE, > - DOVE_PCIE1_MEM_SIZE); > - mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET, > - DOVE_MBUS_CESA_ATTR, > - DOVE_CESA_PHYS_BASE, > - DOVE_CESA_SIZE); > - mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET, > - DOVE_MBUS_BOOTROM_ATTR, > - DOVE_BOOTROM_PHYS_BASE, > - DOVE_BOOTROM_SIZE); > - mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET, > - DOVE_MBUS_SCRATCHPAD_ATTR, > - DOVE_SCRATCHPAD_PHYS_BASE, > - DOVE_SCRATCHPAD_SIZE); > -} > - > -static struct resource orion_wdt_resource[] = { > - DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), > - DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), > -}; > - > -static struct platform_device orion_wdt_device = { > - .name = "orion_wdt", > - .id = -1, > - .num_resources = ARRAY_SIZE(orion_wdt_resource), > - .resource = orion_wdt_resource, > -}; > - > -static void __init __maybe_unused orion_wdt_init(void) > -{ > - platform_device_register(&orion_wdt_device); > -} > - > -static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = { > - { > - .pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK, > - .rst_mask = PMU_SW_RST_VIDEO_MASK, > - .iso_mask = PMU_ISO_VIDEO_MASK, > - .name = "vpu-domain", > - }, { > - .pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK, > - .rst_mask = PMU_SW_RST_GPU_MASK, > - .iso_mask = PMU_ISO_GPU_MASK, > - .name = "gpu-domain", > - }, { > - /* sentinel */ > - }, > -}; > - > -static const struct dove_pmu_initdata pmu_data __initconst = { > - .pmc_base = DOVE_PMU_VIRT_BASE, > - .pmu_base = DOVE_PMU_VIRT_BASE + 0x8000, > - .irq = IRQ_DOVE_PMU, > - .irq_domain_start = IRQ_DOVE_PMU_START, > - .domains = pmu_domains, > -}; > - > -void __init dove_init(void) > -{ > - pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", > - (dove_tclk + 499999) / 1000000); > - > -#ifdef CONFIG_CACHE_TAUROS2 > - tauros2_init(0); > -#endif > - dove_setup_cpu_wins(); > - > - /* Setup root of clk tree */ > - dove_clk_init(); > - > - /* internal devices that every board has */ > - dove_init_pmu_legacy(&pmu_data); > - dove_rtc_init(); > - dove_xor0_init(); > - dove_xor1_init(); > -} > - > -void dove_restart(enum reboot_mode mode, const char *cmd) > -{ > - /* > - * Enable soft reset to assert RSTOUTn. > - */ > - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); > - > - /* > - * Assert soft reset. > - */ > - writel(SOFT_RESET, SYSTEM_SOFT_RESET); > - > - while (1) > - ; > -} > diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h > deleted file mode 100644 > index 57ebc413d68c..000000000000 > --- a/arch/arm/mach-dove/common.h > +++ /dev/null > @@ -1,46 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* > - * arch/arm/mach-dove/common.h > - * > - * Core functions for Marvell Dove 88AP510 System On Chip > - */ > - > -#ifndef __ARCH_DOVE_COMMON_H > -#define __ARCH_DOVE_COMMON_H > - > -#include <linux/reboot.h> > - > -struct mv643xx_eth_platform_data; > -struct mv_sata_platform_data; > - > -extern void dove_timer_init(void); > - > -/* > - * Basic Dove init functions used early by machine-setup. > - */ > -void dove_map_io(void); > -void dove_init(void); > -void dove_init_early(void); > -void dove_init_irq(void); > -void dove_setup_cpu_wins(void); > -void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); > -void dove_sata_init(struct mv_sata_platform_data *sata_data); > -#ifdef CONFIG_PCI > -void dove_pcie_init(int init_port0, int init_port1); > -#else > -static inline void dove_pcie_init(int init_port0, int init_port1) { } > -#endif > -void dove_ehci0_init(void); > -void dove_ehci1_init(void); > -void dove_uart0_init(void); > -void dove_uart1_init(void); > -void dove_uart2_init(void); > -void dove_uart3_init(void); > -void dove_spi0_init(void); > -void dove_spi1_init(void); > -void dove_i2c_init(void); > -void dove_sdio0_init(void); > -void dove_sdio1_init(void); > -void dove_restart(enum reboot_mode, const char *); > - > -#endif > diff --git a/arch/arm/mach-dove/dove.h b/arch/arm/mach-dove/dove.h > deleted file mode 100644 > index e5054e3b0b78..000000000000 > --- a/arch/arm/mach-dove/dove.h > +++ /dev/null > @@ -1,185 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* Generic definitions for Marvell Dove 88AP510 SoC */ > - > -#ifndef __ASM_ARCH_DOVE_H > -#define __ASM_ARCH_DOVE_H > - > -#include "irqs.h" > - > -/* > - * Marvell Dove address maps. > - * > - * phys virt size > - * c8000000 fdb00000 1M Cryptographic SRAM > - * e0000000 @runtime 128M PCIe-0 Memory space > - * e8000000 @runtime 128M PCIe-1 Memory space > - * f1000000 fec00000 1M on-chip south-bridge registers > - * f1800000 fe400000 8M on-chip north-bridge registers > - * f2000000 fee00000 1M PCIe-0 I/O space > - * f2100000 fef00000 1M PCIe-1 I/O space > - */ > - > -#define DOVE_CESA_PHYS_BASE 0xc8000000 > -#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) > -#define DOVE_CESA_SIZE SZ_1M > - > -#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 > -#define DOVE_PCIE0_MEM_SIZE SZ_128M > - > -#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000 > -#define DOVE_PCIE1_MEM_SIZE SZ_128M > - > -#define DOVE_BOOTROM_PHYS_BASE 0xf8000000 > -#define DOVE_BOOTROM_SIZE SZ_128M > - > -#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 > -#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) > -#define DOVE_SCRATCHPAD_SIZE SZ_1M > - > -#define DOVE_SB_REGS_PHYS_BASE 0xf1000000 > -#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfec00000) > -#define DOVE_SB_REGS_SIZE SZ_1M > - > -#define DOVE_NB_REGS_PHYS_BASE 0xf1800000 > -#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe400000) > -#define DOVE_NB_REGS_SIZE SZ_8M > - > -#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 > -#define DOVE_PCIE0_IO_BUS_BASE 0x00000000 > -#define DOVE_PCIE0_IO_SIZE SZ_64K > - > -#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 > -#define DOVE_PCIE1_IO_BUS_BASE 0x00010000 > -#define DOVE_PCIE1_IO_SIZE SZ_64K > - > -/* > - * Dove Core Registers Map > - */ > - > -/* SPI, I2C, UART */ > -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) > -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) > -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) > -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) > -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) > -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) > -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) > -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) > -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) > -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) > -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) > - > -/* North-South Bridge */ > -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) > -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) > -#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) > -#define BRIDGE_WINS_SZ (0x80) > - > -/* Cryptographic Engine */ > -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) > - > -/* PCIe 0 */ > -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) > - > -/* USB */ > -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) > -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) > - > -/* XOR 0 Engine */ > -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) > -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) > -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) > -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) > - > -/* XOR 1 Engine */ > -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) > -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) > -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) > -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) > - > -/* Gigabit Ethernet */ > -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) > - > -/* PCIe 1 */ > -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) > - > -/* CAFE */ > -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) > -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) > -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) > -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) > - > -/* SATA */ > -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) > - > -/* I2S/SPDIF */ > -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) > -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) > - > -/* NAND Flash Controller */ > -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) > - > -/* MPP, GPIO, Reset Sampling */ > -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) > -#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) > -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) > -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) > -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) > -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) > -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) > -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) > -#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) > -#define DOVE_NAND_GPIO_EN (1 << 0) > -#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) > -#define DOVE_SPI_GPIO_SEL (1 << 5) > -#define DOVE_UART1_GPIO_SEL (1 << 4) > -#define DOVE_AU1_GPIO_SEL (1 << 3) > -#define DOVE_CAM_GPIO_SEL (1 << 2) > -#define DOVE_SD1_GPIO_SEL (1 << 1) > -#define DOVE_SD0_GPIO_SEL (1 << 0) > - > -/* Power Management */ > -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) > -#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) > - > -/* Real Time Clock */ > -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) > - > -/* AC97 */ > -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) > -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) > - > -/* Peripheral DMA */ > -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) > -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) > - > -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) > -#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) > -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) > -#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) > -#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) > -#define DOVE_TWSI_OPTION3_GPIO (1 << 22) > -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) > -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) > -#define DOVE_SSP_ON_AU1 (1 << 0) > -#define DOVE_SSP_CLOCK_ENABLE (1 << 1) > -#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) > -/* Memory Controller */ > -#define DOVE_MC_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x00000) > -#define DOVE_MC_WINS_BASE (DOVE_MC_PHYS_BASE + 0x100) > -#define DOVE_MC_WINS_SZ (0x8) > -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) > - > -/* LCD Controller */ > -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) > -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) > -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) > -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) > - > -/* Graphic Engine */ > -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) > - > -/* Video Engine */ > -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) > - > -#endif > diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c > deleted file mode 100644 > index 027a8f87bc2e..000000000000 > --- a/arch/arm/mach-dove/irq.c > +++ /dev/null > @@ -1,81 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-dove/irq.c > - * > - * Dove IRQ handling. > - */ > -#include <linux/init.h> > -#include <linux/irq.h> > -#include <linux/io.h> > -#include <asm/exception.h> > - > -#include <plat/irq.h> > -#include <plat/orion-gpio.h> > - > -#include "pm.h" > -#include "bridge-regs.h" > -#include "common.h" > - > -static int __initdata gpio0_irqs[4] = { > - IRQ_DOVE_GPIO_0_7, > - IRQ_DOVE_GPIO_8_15, > - IRQ_DOVE_GPIO_16_23, > - IRQ_DOVE_GPIO_24_31, > -}; > - > -static int __initdata gpio1_irqs[4] = { > - IRQ_DOVE_HIGH_GPIO, > - 0, > - 0, > - 0, > -}; > - > -static int __initdata gpio2_irqs[4] = { > - 0, > - 0, > - 0, > - 0, > -}; > - > -static void __iomem *dove_irq_base = IRQ_VIRT_BASE; > - > -static asmlinkage void > -__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) > -{ > - u32 stat; > - > - stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); > - stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); > - if (stat) { > - unsigned int hwirq = 1 + __fls(stat); > - handle_IRQ(hwirq, regs); > - return; > - } > - stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); > - stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); > - if (stat) { > - unsigned int hwirq = 33 + __fls(stat); > - handle_IRQ(hwirq, regs); > - return; > - } > -} > - > -void __init dove_init_irq(void) > -{ > - orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); > - orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); > - > - set_handle_irq(dove_legacy_handle_irq); > - > - /* > - * Initialize gpiolib for GPIOs 0-71. > - */ > - orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, > - IRQ_DOVE_GPIO_START, gpio0_irqs); > - > - orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, > - IRQ_DOVE_GPIO_START + 32, gpio1_irqs); > - > - orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, > - IRQ_DOVE_GPIO_START + 64, gpio2_irqs); > -} > diff --git a/arch/arm/mach-dove/irqs.h b/arch/arm/mach-dove/irqs.h > deleted file mode 100644 > index 5467098c7042..000000000000 > --- a/arch/arm/mach-dove/irqs.h > +++ /dev/null > @@ -1,89 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* IRQ definitions for Marvell Dove 88AP510 SoC */ > - > -#ifndef __ASM_ARCH_IRQS_H > -#define __ASM_ARCH_IRQS_H > - > -/* > - * Dove Low Interrupt Controller > - */ > -#define IRQ_DOVE_BRIDGE (1 + 0) > -#define IRQ_DOVE_H2C (1 + 1) > -#define IRQ_DOVE_C2H (1 + 2) > -#define IRQ_DOVE_NAND (1 + 3) > -#define IRQ_DOVE_PDMA (1 + 4) > -#define IRQ_DOVE_SPI1 (1 + 5) > -#define IRQ_DOVE_SPI0 (1 + 6) > -#define IRQ_DOVE_UART_0 (1 + 7) > -#define IRQ_DOVE_UART_1 (1 + 8) > -#define IRQ_DOVE_UART_2 (1 + 9) > -#define IRQ_DOVE_UART_3 (1 + 10) > -#define IRQ_DOVE_I2C (1 + 11) > -#define IRQ_DOVE_GPIO_0_7 (1 + 12) > -#define IRQ_DOVE_GPIO_8_15 (1 + 13) > -#define IRQ_DOVE_GPIO_16_23 (1 + 14) > -#define IRQ_DOVE_PCIE0_ERR (1 + 15) > -#define IRQ_DOVE_PCIE0 (1 + 16) > -#define IRQ_DOVE_PCIE1_ERR (1 + 17) > -#define IRQ_DOVE_PCIE1 (1 + 18) > -#define IRQ_DOVE_I2S0 (1 + 19) > -#define IRQ_DOVE_I2S0_ERR (1 + 20) > -#define IRQ_DOVE_I2S1 (1 + 21) > -#define IRQ_DOVE_I2S1_ERR (1 + 22) > -#define IRQ_DOVE_USB_ERR (1 + 23) > -#define IRQ_DOVE_USB0 (1 + 24) > -#define IRQ_DOVE_USB1 (1 + 25) > -#define IRQ_DOVE_GE00_RX (1 + 26) > -#define IRQ_DOVE_GE00_TX (1 + 27) > -#define IRQ_DOVE_GE00_MISC (1 + 28) > -#define IRQ_DOVE_GE00_SUM (1 + 29) > -#define IRQ_DOVE_GE00_ERR (1 + 30) > -#define IRQ_DOVE_CRYPTO (1 + 31) > - > -/* > - * Dove High Interrupt Controller > - */ > -#define IRQ_DOVE_AC97 (1 + 32) > -#define IRQ_DOVE_PMU (1 + 33) > -#define IRQ_DOVE_CAM (1 + 34) > -#define IRQ_DOVE_SDIO0 (1 + 35) > -#define IRQ_DOVE_SDIO1 (1 + 36) > -#define IRQ_DOVE_SDIO0_WAKEUP (1 + 37) > -#define IRQ_DOVE_SDIO1_WAKEUP (1 + 38) > -#define IRQ_DOVE_XOR_00 (1 + 39) > -#define IRQ_DOVE_XOR_01 (1 + 40) > -#define IRQ_DOVE_XOR0_ERR (1 + 41) > -#define IRQ_DOVE_XOR_10 (1 + 42) > -#define IRQ_DOVE_XOR_11 (1 + 43) > -#define IRQ_DOVE_XOR1_ERR (1 + 44) > -#define IRQ_DOVE_LCD_DCON (1 + 45) > -#define IRQ_DOVE_LCD1 (1 + 46) > -#define IRQ_DOVE_LCD0 (1 + 47) > -#define IRQ_DOVE_GPU (1 + 48) > -#define IRQ_DOVE_PERFORM_MNTR (1 + 49) > -#define IRQ_DOVE_VPRO_DMA1 (1 + 51) > -#define IRQ_DOVE_SSP_TIMER (1 + 54) > -#define IRQ_DOVE_SSP (1 + 55) > -#define IRQ_DOVE_MC_L2_ERR (1 + 56) > -#define IRQ_DOVE_CRYPTO_ERR (1 + 59) > -#define IRQ_DOVE_GPIO_24_31 (1 + 60) > -#define IRQ_DOVE_HIGH_GPIO (1 + 61) > -#define IRQ_DOVE_SATA (1 + 62) > - > -/* > - * DOVE General Purpose Pins > - */ > -#define IRQ_DOVE_GPIO_START 65 > -#define NR_GPIO_IRQS 64 > - > -/* > - * PMU interrupts > - */ > -#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS) > -#define NR_PMU_IRQS 7 > -#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5) > - > -#define DOVE_NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS) > - > - > -#endif > diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c > deleted file mode 100644 > index e41bd473abe9..000000000000 > --- a/arch/arm/mach-dove/mpp.c > +++ /dev/null > @@ -1,159 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-dove/mpp.c > - * > - * MPP functions for Marvell Dove SoCs > - */ > - > -#include <linux/kernel.h> > -#include <linux/gpio/consumer.h> > -#include <linux/io.h> > -#include <plat/mpp.h> > -#include <plat/orion-gpio.h> > -#include "dove.h" > -#include "mpp.h" > - > -struct dove_mpp_grp { > - int start; > - int end; > -}; > - > -/* Map a group to a range of GPIO pins in that group */ > -static const struct dove_mpp_grp dove_mpp_grp[] = { > - [MPP_24_39] = { > - .start = 24, > - .end = 39, > - }, > - [MPP_40_45] = { > - .start = 40, > - .end = 45, > - }, > - [MPP_46_51] = { > - .start = 46, > - .end = 51, > - }, > - [MPP_58_61] = { > - .start = 58, > - .end = 61, > - }, > - [MPP_62_63] = { > - .start = 62, > - .end = 63, > - }, > -}; > - > -/* Enable gpio for a range of pins. mode should be a combination of > - GPIO_OUTPUT_OK | GPIO_INPUT_OK */ > -static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode) > -{ > - int i; > - > - for (i = start; i <= end; i++) > - orion_gpio_set_valid(i, gpio_mode); > -} > - > -/* Dump all the extra MPP registers. The platform code will dump the > - registers for pins 0-23. */ > -static void __init dove_mpp_dump_regs(void) > -{ > - pr_debug("PMU_CTRL4_CTRL: %08x\n", > - readl(DOVE_MPP_CTRL4_VIRT_BASE)); > - > - pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", > - readl(DOVE_PMU_MPP_GENERAL_CTRL)); > - > - pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE)); > -} > - > -static void __init dove_mpp_cfg_nfc(int sel) > -{ > - u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE); > - > - mpp_gen_cfg &= ~0x1; > - mpp_gen_cfg |= sel; > - writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE); > - > - dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK); > -} > - > -static void __init dove_mpp_cfg_au1(int sel) > -{ > - u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); > - u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1); > - u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE); > - u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2); > - > - mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL); > - ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1); > - mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN); > - global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO); > - > - if (!sel || sel == 0x2) > - dove_mpp_gpio_mode(52, 57, 0); > - else > - dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); > - > - if (sel & 0x1) { > - global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO; > - dove_mpp_gpio_mode(56, 57, 0); > - } > - if (sel & 0x2) { > - mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN; > - dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK); > - } > - if (sel & 0x4) { > - ssp_ctrl1 |= DOVE_SSP_ON_AU1; > - dove_mpp_gpio_mode(52, 55, 0); > - } > - if (sel & 0x8) > - mpp_ctrl4 |= DOVE_AU1_GPIO_SEL; > - > - writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); > - writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1); > - writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE); > - writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2); > -} > - > -/* Configure the group registers, enabling GPIO if sel indicates the > - pin is to be used for GPIO */ > -static void __init dove_mpp_conf_grp(unsigned int *mpp_grp_list) > -{ > - u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); > - int gpio_mode; > - > - for ( ; *mpp_grp_list; mpp_grp_list++) { > - unsigned int num = MPP_NUM(*mpp_grp_list); > - unsigned int sel = MPP_SEL(*mpp_grp_list); > - > - if (num > MPP_GRP_MAX) { > - pr_err("dove: invalid MPP GRP number (%u)\n", num); > - continue; > - } > - > - mpp_ctrl4 &= ~(0x1 << num); > - mpp_ctrl4 |= sel << num; > - > - gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0; > - dove_mpp_gpio_mode(dove_mpp_grp[num].start, > - dove_mpp_grp[num].end, gpio_mode); > - } > - writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE); > -} > - > -/* Configure the various MPP pins on Dove */ > -void __init dove_mpp_conf(unsigned int *mpp_list, > - unsigned int *mpp_grp_list, > - unsigned int grp_au1_52_57, > - unsigned int grp_nfc_64_71) > -{ > - dove_mpp_dump_regs(); > - > - /* Use platform code for pins 0-23 */ > - orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE); > - > - dove_mpp_conf_grp(mpp_grp_list); > - dove_mpp_cfg_au1(grp_au1_52_57); > - dove_mpp_cfg_nfc(grp_nfc_64_71); > - > - dove_mpp_dump_regs(); > -} > diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h > deleted file mode 100644 > index 2e4b89c86ca8..000000000000 > --- a/arch/arm/mach-dove/mpp.h > +++ /dev/null > @@ -1,197 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef __ARCH_DOVE_MPP_CODED_H > -#define __ARCH_DOVE_MPP_CODED_H > - > -#define MPP(_num, _sel, _in, _out) ( \ > - /* MPP number */ ((_num) & 0xff) | \ > - /* MPP select value */ (((_sel) & 0xf) << 8) | \ > - /* may be input signal */ ((!!(_in)) << 12) | \ > - /* may be output signal */ ((!!(_out)) << 13)) > - > -#define MPP0_GPIO0 MPP(0, 0x0, 1, 1) > -#define MPP0_UA2_RTSn MPP(0, 0x2, 0, 0) > -#define MPP0_SDIO0_CD MPP(0, 0x3, 0, 0) > -#define MPP0_LCD0_PWM MPP(0, 0xf, 0, 0) > - > -#define MPP1_GPIO1 MPP(1, 0x0, 1, 1) > -#define MPP1_UA2_CTSn MPP(1, 0x2, 0, 0) > -#define MPP1_SDIO0_WP MPP(1, 0x3, 0, 0) > -#define MPP1_LCD1_PWM MPP(1, 0xf, 0, 0) > - > -#define MPP2_GPIO2 MPP(2, 0x0, 1, 1) > -#define MPP2_SATA_PRESENT MPP(2, 0x1, 0, 0) > -#define MPP2_UA2_TXD MPP(2, 0x2, 0, 0) > -#define MPP2_SDIO0_BUS_POWER MPP(2, 0x3, 0, 0) > -#define MPP2_UA_RTSn1 MPP(2, 0x4, 0, 0) > - > -#define MPP3_GPIO3 MPP(3, 0x0, 1, 1) > -#define MPP3_SATA_ACT MPP(3, 0x1, 0, 0) > -#define MPP3_UA2_RXD MPP(3, 0x2, 0, 0) > -#define MPP3_SDIO0_LED_CTRL MPP(3, 0x3, 0, 0) > -#define MPP3_UA_CTSn1 MPP(3, 0x4, 0, 0) > -#define MPP3_SPI_LCD_CS1 MPP(3, 0xf, 0, 0) > - > -#define MPP4_GPIO4 MPP(4, 0x0, 1, 1) > -#define MPP4_UA3_RTSn MPP(4, 0x2, 0, 0) > -#define MPP4_SDIO1_CD MPP(4, 0x3, 0, 0) > -#define MPP4_SPI_1_MISO MPP(4, 0x4, 0, 0) > - > -#define MPP5_GPIO5 MPP(5, 0x0, 1, 1) > -#define MPP5_UA3_CTSn MPP(5, 0x2, 0, 0) > -#define MPP5_SDIO1_WP MPP(5, 0x3, 0, 0) > -#define MPP5_SPI_1_CS MPP(5, 0x4, 0, 0) > - > -#define MPP6_GPIO6 MPP(6, 0x0, 1, 1) > -#define MPP6_UA3_TXD MPP(6, 0x2, 0, 0) > -#define MPP6_SDIO1_BUS_POWER MPP(6, 0x3, 0, 0) > -#define MPP6_SPI_1_MOSI MPP(6, 0x4, 0, 0) > - > -#define MPP7_GPIO7 MPP(7, 0x0, 1, 1) > -#define MPP7_UA3_RXD MPP(7, 0x2, 0, 0) > -#define MPP7_SDIO1_LED_CTRL MPP(7, 0x3, 0, 0) > -#define MPP7_SPI_1_SCK MPP(7, 0x4, 0, 0) > - > -#define MPP8_GPIO8 MPP(8, 0x0, 1, 1) > -#define MPP8_WD_RST_OUT MPP(8, 0x1, 0, 0) > - > -#define MPP9_GPIO9 MPP(9, 0x0, 1, 1) > -#define MPP9_PEX1_CLKREQn MPP(9, 0x5, 0, 0) > - > -#define MPP10_GPIO10 MPP(10, 0x0, 1, 1) > -#define MPP10_SSP_SCLK MPP(10, 0x5, 0, 0) > - > -#define MPP11_GPIO11 MPP(11, 0x0, 1, 1) > -#define MPP11_SATA_PRESENT MPP(11, 0x1, 0, 0) > -#define MPP11_SATA_ACT MPP(11, 0x2, 0, 0) > -#define MPP11_SDIO0_LED_CTRL MPP(11, 0x3, 0, 0) > -#define MPP11_SDIO1_LED_CTRL MPP(11, 0x4, 0, 0) > -#define MPP11_PEX0_CLKREQn MPP(11, 0x5, 0, 0) > - > -#define MPP12_GPIO12 MPP(12, 0x0, 1, 1) > -#define MPP12_SATA_ACT MPP(12, 0x1, 0, 0) > -#define MPP12_UA2_RTSn MPP(12, 0x2, 0, 0) > -#define MPP12_AD0_I2S_EXT_MCLK MPP(12, 0x3, 0, 0) > -#define MPP12_SDIO1_CD MPP(12, 0x4, 0, 0) > - > -#define MPP13_GPIO13 MPP(13, 0x0, 1, 1) > -#define MPP13_UA2_CTSn MPP(13, 0x2, 0, 0) > -#define MPP13_AD1_I2S_EXT_MCLK MPP(13, 0x3, 0, 0) > -#define MPP13_SDIO1WP MPP(13, 0x4, 0, 0) > -#define MPP13_SSP_EXTCLK MPP(13, 0x5, 0, 0) > - > -#define MPP14_GPIO14 MPP(14, 0x0, 1, 1) > -#define MPP14_UA2_TXD MPP(14, 0x2, 0, 0) > -#define MPP14_SDIO1_BUS_POWER MPP(14, 0x4, 0, 0) > -#define MPP14_SSP_RXD MPP(14, 0x5, 0, 0) > - > -#define MPP15_GPIO15 MPP(15, 0x0, 1, 1) > -#define MPP15_UA2_RXD MPP(15, 0x2, 0, 0) > -#define MPP15_SDIO1_LED_CTRL MPP(15, 0x4, 0, 0) > -#define MPP15_SSP_SFRM MPP(15, 0x5, 0, 0) > - > -#define MPP16_GPIO16 MPP(16, 0x0, 1, 1) > -#define MPP16_UA3_RTSn MPP(16, 0x2, 0, 0) > -#define MPP16_SDIO0_CD MPP(16, 0x3, 0, 0) > -#define MPP16_SPI_LCD_CS1 MPP(16, 0x4, 0, 0) > -#define MPP16_AC97_SDATA_IN1 MPP(16, 0x5, 0, 0) > - > -#define MPP17_GPIO17 MPP(17, 0x0, 1, 1) > -#define MPP17_AC97_SYSCLK_OUT MPP(17, 0x1, 0, 0) > -#define MPP17_UA3_CTSn MPP(17, 0x2, 0, 0) > -#define MPP17_SDIO0_WP MPP(17, 0x3, 0, 0) > -#define MPP17_TW_SDA2 MPP(17, 0x4, 0, 0) > -#define MPP17_AC97_SDATA_IN2 MPP(17, 0x5, 0, 0) > - > -#define MPP18_GPIO18 MPP(18, 0x0, 1, 1) > -#define MPP18_UA3_TXD MPP(18, 0x2, 0, 0) > -#define MPP18_SDIO0_BUS_POWER MPP(18, 0x3, 0, 0) > -#define MPP18_LCD0_PWM MPP(18, 0x4, 0, 0) > -#define MPP18_AC_SDATA_IN3 MPP(18, 0x5, 0, 0) > - > -#define MPP19_GPIO19 MPP(19, 0x0, 1, 1) > -#define MPP19_UA3_RXD MPP(19, 0x2, 0, 0) > -#define MPP19_SDIO0_LED_CTRL MPP(19, 0x3, 0, 0) > -#define MPP19_TW_SCK2 MPP(19, 0x4, 0, 0) > - > -#define MPP20_GPIO20 MPP(20, 0x0, 1, 1) > -#define MPP20_AC97_SYSCLK_OUT MPP(20, 0x1, 0, 0) > -#define MPP20_SPI_LCD_MISO MPP(20, 0x2, 0, 0) > -#define MPP20_SDIO1_CD MPP(20, 0x3, 0, 0) > -#define MPP20_SDIO0_CD MPP(20, 0x5, 0, 0) > -#define MPP20_SPI_1_MISO MPP(20, 0x6, 0, 0) > - > -#define MPP21_GPIO21 MPP(21, 0x0, 1, 1) > -#define MPP21_UA1_RTSn MPP(21, 0x1, 0, 0) > -#define MPP21_SPI_LCD_CS0 MPP(21, 0x2, 0, 0) > -#define MPP21_SDIO1_WP MPP(21, 0x3, 0, 0) > -#define MPP21_SSP_SFRM MPP(21, 0x4, 0, 0) > -#define MPP21_SDIO0_WP MPP(21, 0x5, 0, 0) > -#define MPP21_SPI_1_CS MPP(21, 0x6, 0, 0) > - > -#define MPP22_GPIO22 MPP(22, 0x0, 1, 1) > -#define MPP22_UA1_CTSn MPP(22, 0x1, 0, 0) > -#define MPP22_SPI_LCD_MOSI MPP(22, 0x2, 0, 0) > -#define MPP22_SDIO1_BUS_POWER MPP(22, 0x3, 0, 0) > -#define MPP22_SSP_TXD MPP(22, 0x4, 0, 0) > -#define MPP22_SDIO0_BUS_POWER MPP(22, 0x5, 0, 0) > -#define MPP22_SPI_1_MOSI MPP(22, 0x6, 0, 0) > - > -#define MPP23_GPIO23 MPP(23, 0x0, 1, 1) > -#define MPP23_SPI_LCD_SCK MPP(23, 0x2, 0, 0) > -#define MPP23_SDIO1_LED_CTRL MPP(23, 0x3, 0, 0) > -#define MPP23_SSP_SCLK MPP(23, 0x4, 0, 0) > -#define MPP23_SDIO0_LED_CTRL MPP(23, 0x5, 0, 0) > -#define MPP23_SPI_1_SCK MPP(23, 0x6, 0, 0) > - > -#define MPP_MAX 23 > - > -#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 0) > - > -/* for MPP groups _num is a group index */ > -enum dove_mpp_grp_idx { > - MPP_24_39 = 2, > - MPP_40_45 = 0, > - MPP_46_51 = 1, > - MPP_58_61 = 5, > - MPP_62_63 = 4, > - MPP_GRP_MAX = 5, > -}; > - > -#define MPP_GRP_24_39_GPIO MPP_GRP(MPP_24_39, 0x1) > -#define MPP_GRP_24_39_CAM MPP_GRP(MPP_24_39, 0x0) > - > -#define MPP_GRP_40_45_GPIO MPP_GRP(MPP_40_45, 0x1) > -#define MPP_GRP_40_45_SD0 MPP_GRP(MPP_40_45, 0x0) > - > -#define MPP_GRP_46_51_GPIO MPP_GRP(MPP_46_51, 0x1) > -#define MPP_GRP_46_51_SD1 MPP_GRP(MPP_46_51, 0x0) > - > -#define MPP_GRP_58_61_GPIO MPP_GRP(MPP_58_61, 0x1) > -#define MPP_GRP_58_61_SPI MPP_GRP(MPP_58_61, 0x0) > - > -#define MPP_GRP_62_63_GPIO MPP_GRP(MPP_62_63, 0x1) > -#define MPP_GRP_62_63_UA1 MPP_GRP(MPP_62_63, 0x0) > - > -/* The MPP[64:71] control differs from other groups */ > -#define MPP_GRP_NFC_64_71_GPO 0x1 > -#define MPP_GRP_NFC_64_71_NFC 0x0 > - > -/* > - * The MPP[52:57] functionality is encoded by 4 bits in different > - * registers. The _num field in this case encodes those bits in > - * correspodence with Table 135 of 88AP510 Functional specification > - */ > -#define MPP_GRP_AU1_52_57_AU1 0x0 > -#define MPP_GRP_AU1_52_57_AU1_GPIO57 0x2 > -#define MPP_GRP_AU1_52_57_GPIO 0xa > -#define MPP_GRP_AU1_52_57_TW_GPIO 0xb > -#define MPP_GRP_AU1_52_57_AU1_SSP 0xc > -#define MPP_GRP_AU1_52_57_SSP_GPIO 0xe > -#define MPP_GRP_AU1_52_57_SSP_TW 0xf > - > -void dove_mpp_conf(unsigned int *mpp_list, > - unsigned int *mpp_grp_list, > - unsigned int grp_au1_52_57, > - unsigned int grp_nfc_64_71); > - > -#endif /* __ARCH_DOVE_MPP_CODED_H */ > diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c > deleted file mode 100644 > index 3044b7e03890..000000000000 > --- a/arch/arm/mach-dove/pcie.c > +++ /dev/null > @@ -1,226 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-dove/pcie.c > - * > - * PCIe functions for Marvell Dove 88AP510 SoC > - */ > - > -#include <linux/kernel.h> > -#include <linux/pci.h> > -#include <linux/clk.h> > -#include <video/vga.h> > -#include <asm/mach/pci.h> > -#include <asm/mach/arch.h> > -#include <asm/setup.h> > -#include <asm/delay.h> > -#include <plat/pcie.h> > -#include <plat/addr-map.h> > -#include "irqs.h" > -#include "bridge-regs.h" > -#include "common.h" > - > -struct pcie_port { > - u8 index; > - u8 root_bus_nr; > - void __iomem *base; > - spinlock_t conf_lock; > - char mem_space_name[16]; > - struct resource res; > -}; > - > -static struct pcie_port pcie_port[2]; > -static int num_pcie_ports; > - > - > -static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) > -{ > - struct pcie_port *pp; > - struct resource realio; > - > - if (nr >= num_pcie_ports) > - return 0; > - > - pp = &pcie_port[nr]; > - sys->private_data = pp; > - pp->root_bus_nr = sys->busnr; > - > - /* > - * Generic PCIe unit setup. > - */ > - orion_pcie_set_local_bus_nr(pp->base, sys->busnr); > - > - orion_pcie_setup(pp->base); > - > - realio.start = sys->busnr * SZ_64K; > - realio.end = realio.start + SZ_64K - 1; > - pci_remap_iospace(&realio, pp->index == 0 ? DOVE_PCIE0_IO_PHYS_BASE : > - DOVE_PCIE1_IO_PHYS_BASE); > - > - /* > - * IORESOURCE_MEM > - */ > - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), > - "PCIe %d MEM", pp->index); > - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; > - pp->res.name = pp->mem_space_name; > - if (pp->index == 0) { > - pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE; > - pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1; > - } else { > - pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE; > - pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1; > - } > - pp->res.flags = IORESOURCE_MEM; > - if (request_resource(&iomem_resource, &pp->res)) > - panic("Request PCIe Memory resource failed\n"); > - pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); > - > - return 1; > -} > - > -static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) > -{ > - /* > - * Don't go out when trying to access nonexisting devices > - * on the local bus. > - */ > - if (bus == pp->root_bus_nr && dev > 1) > - return 0; > - > - return 1; > -} > - > -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, > - int size, u32 *val) > -{ > - struct pci_sys_data *sys = bus->sysdata; > - struct pcie_port *pp = sys->private_data; > - unsigned long flags; > - int ret; > - > - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { > - *val = 0xffffffff; > - return PCIBIOS_DEVICE_NOT_FOUND; > - } > - > - spin_lock_irqsave(&pp->conf_lock, flags); > - ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); > - spin_unlock_irqrestore(&pp->conf_lock, flags); > - > - return ret; > -} > - > -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, > - int where, int size, u32 val) > -{ > - struct pci_sys_data *sys = bus->sysdata; > - struct pcie_port *pp = sys->private_data; > - unsigned long flags; > - int ret; > - > - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) > - return PCIBIOS_DEVICE_NOT_FOUND; > - > - spin_lock_irqsave(&pp->conf_lock, flags); > - ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); > - spin_unlock_irqrestore(&pp->conf_lock, flags); > - > - return ret; > -} > - > -static struct pci_ops pcie_ops = { > - .read = pcie_rd_conf, > - .write = pcie_wr_conf, > -}; > - > -/* > - * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it > - * is operating as a root complex this needs to be switched to > - * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on > - * the device. Decoding setup is handled by the orion code. > - */ > -static void rc_pci_fixup(struct pci_dev *dev) > -{ > - if (dev->bus->parent == NULL && dev->devfn == 0) { > - struct resource *r; > - > - dev->class &= 0xff; > - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; > - pci_dev_for_each_resource(dev, r) { > - r->start = 0; > - r->end = 0; > - r->flags = 0; > - } > - } > -} > -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); > - > -static int __init > -dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge) > -{ > - struct pci_sys_data *sys = pci_host_bridge_priv(bridge); > - > - if (nr >= num_pcie_ports) { > - BUG(); > - return -EINVAL; > - } > - > - list_splice_init(&sys->resources, &bridge->windows); > - bridge->dev.parent = NULL; > - bridge->sysdata = sys; > - bridge->busnr = sys->busnr; > - bridge->ops = &pcie_ops; > - > - return pci_scan_root_bus_bridge(bridge); > -} > - > -static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) > -{ > - struct pci_sys_data *sys = dev->sysdata; > - struct pcie_port *pp = sys->private_data; > - > - return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0; > -} > - > -static struct hw_pci dove_pci __initdata = { > - .nr_controllers = 2, > - .setup = dove_pcie_setup, > - .scan = dove_pcie_scan_bus, > - .map_irq = dove_pcie_map_irq, > -}; > - > -static void __init add_pcie_port(int index, void __iomem *base) > -{ > - printk(KERN_INFO "Dove PCIe port %d: ", index); > - > - if (orion_pcie_link_up(base)) { > - struct pcie_port *pp = &pcie_port[num_pcie_ports++]; > - struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0")); > - > - if (!IS_ERR(clk)) > - clk_prepare_enable(clk); > - > - printk(KERN_INFO "link up\n"); > - > - pp->index = index; > - pp->root_bus_nr = -1; > - pp->base = base; > - spin_lock_init(&pp->conf_lock); > - memset(&pp->res, 0, sizeof(pp->res)); > - } else { > - printk(KERN_INFO "link down, ignoring\n"); > - } > -} > - > -void __init dove_pcie_init(int init_port0, int init_port1) > -{ > - vga_base = DOVE_PCIE0_MEM_PHYS_BASE; > - > - if (init_port0) > - add_pcie_port(0, DOVE_PCIE0_VIRT_BASE); > - > - if (init_port1) > - add_pcie_port(1, DOVE_PCIE1_VIRT_BASE); > - > - pci_common_init(&dove_pci); > -} > diff --git a/arch/arm/mach-dove/pm.h b/arch/arm/mach-dove/pm.h > deleted file mode 100644 > index a4c3aba1e2d0..000000000000 > --- a/arch/arm/mach-dove/pm.h > +++ /dev/null > @@ -1,58 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > - > -#ifndef __ASM_ARCH_PM_H > -#define __ASM_ARCH_PM_H > - > -#include <asm/errno.h> > -#include "irqs.h" > - > -#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) > -#define CLOCK_GATING_BIT_USB0 0 > -#define CLOCK_GATING_BIT_USB1 1 > -#define CLOCK_GATING_BIT_GBE 2 > -#define CLOCK_GATING_BIT_SATA 3 > -#define CLOCK_GATING_BIT_PCIE0 4 > -#define CLOCK_GATING_BIT_PCIE1 5 > -#define CLOCK_GATING_BIT_SDIO0 8 > -#define CLOCK_GATING_BIT_SDIO1 9 > -#define CLOCK_GATING_BIT_NAND 10 > -#define CLOCK_GATING_BIT_CAMERA 11 > -#define CLOCK_GATING_BIT_I2S0 12 > -#define CLOCK_GATING_BIT_I2S1 13 > -#define CLOCK_GATING_BIT_CRYPTO 15 > -#define CLOCK_GATING_BIT_AC97 21 > -#define CLOCK_GATING_BIT_PDMA 22 > -#define CLOCK_GATING_BIT_XOR0 23 > -#define CLOCK_GATING_BIT_XOR1 24 > -#define CLOCK_GATING_BIT_GIGA_PHY 30 > -#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) > -#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) > -#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) > -#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) > -#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) > -#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) > -#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) > -#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) > -#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) > -#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) > -#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) > -#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) > -#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) > -#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) > -#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) > -#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) > -#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) > -#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) > - > -#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) > - > -#define PMU_SW_RST_VIDEO_MASK BIT(16) > -#define PMU_SW_RST_GPU_MASK BIT(18) > - > -#define PMU_PWR_GPU_PWR_DWN_MASK BIT(2) > -#define PMU_PWR_VPU_PWR_DWN_MASK BIT(3) > - > -#define PMU_ISO_VIDEO_MASK BIT(0) > -#define PMU_ISO_GPU_MASK BIT(1) > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig > deleted file mode 100644 > index 98b35f5d05ba..000000000000 > --- a/arch/arm/mach-mv78xx0/Kconfig > +++ /dev/null > @@ -1,27 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0-only > -menuconfig ARCH_MV78XX0 > - bool "Marvell MV78xx0 (DEPRECATED)" > - depends on ARCH_MULTI_V5 > - depends on CPU_LITTLE_ENDIAN > - depends on ATAGS > - select CPU_FEROCEON > - select GPIOLIB > - select GPIOLIB_LEGACY > - select MVEBU_MBUS > - select FORCE_PCI > - select PLAT_ORION_LEGACY > - help > - Support for the following Marvell MV78xx0 series SoCs: > - MV781x0, MV782x0. > - > - This platform is scheduled for removal in early 2027. > - > -if ARCH_MV78XX0 > - > -config MACH_TERASTATION_WXL > - bool "Buffalo WLX (Terastation Duo) NAS" > - help > - Say 'Y' here if you want your kernel to support the > - Buffalo WXL Nas. > - > -endif > diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile > deleted file mode 100644 > index ddee6ae501bb..000000000000 > --- a/arch/arm/mach-mv78xx0/Makefile > +++ /dev/null > @@ -1,5 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0 > -ccflags-y := -I$(srctree)/arch/arm/plat-orion/include > - > -obj-y += common.o mpp.o irq.o pcie.o > -obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o > diff --git a/arch/arm/mach-mv78xx0/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h > deleted file mode 100644 > index d57ac967c4b3..000000000000 > --- a/arch/arm/mach-mv78xx0/bridge-regs.h > +++ /dev/null > @@ -1,31 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > - > -#ifndef __ASM_ARCH_BRIDGE_REGS_H > -#define __ASM_ARCH_BRIDGE_REGS_H > - > -#include "mv78xx0.h" > - > -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) > -#define L2_WRITETHROUGH 0x00020000 > - > -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) > -#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108) > -#define SOFT_RESET_OUT_EN 0x00000004 > - > -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) > -#define SOFT_RESET 0x00000001 > - > -#define BRIDGE_INT_TIMER1_CLR (~0x0004) > - > -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) > -#define IRQ_CAUSE_ERR_OFF 0x0000 > -#define IRQ_CAUSE_LOW_OFF 0x0004 > -#define IRQ_CAUSE_HIGH_OFF 0x0008 > -#define IRQ_MASK_ERR_OFF 0x000c > -#define IRQ_MASK_LOW_OFF 0x0010 > -#define IRQ_MASK_HIGH_OFF 0x0014 > - > -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) > -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c > deleted file mode 100644 > index 3b2e381b7383..000000000000 > --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c > +++ /dev/null > @@ -1,183 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c > - * > - * Buffalo WXL (Terastation Duo) Setup routines > - * > - * sebastien requiem <sebastien@requiem.fr> > - */ > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/ata_platform.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/ethtool.h> > -#include <linux/i2c.h> > -#include <linux/gpio/legacy.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include "mv78xx0.h" > -#include "common.h" > -#include "mpp.h" > - > - > -#define TSWXL_AUTO_SWITCH 15 > -#define TSWXL_USB_POWER1 30 > -#define TSWXL_USB_POWER2 31 > - > - > -/* This arch has 2 Giga Ethernet */ > - > -static struct mv643xx_eth_platform_data db78x00_ge00_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(0), > -}; > - > -static struct mv643xx_eth_platform_data db78x00_ge01_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > - > -/* 2 SATA controller supporting HotPlug */ > - > -static struct mv_sata_platform_data db78x00_sata_data = { > - .n_ports = 2, > -}; > - > -static struct i2c_board_info __initdata db78x00_i2c_rtc = { > - I2C_BOARD_INFO("rs5c372a", 0x32), > -}; > - > - > -static unsigned int wxl_mpp_config[] __initdata = { > - MPP0_GE1_TXCLK, > - MPP1_GE1_TXCTL, > - MPP2_GE1_RXCTL, > - MPP3_GE1_RXCLK, > - MPP4_GE1_TXD0, > - MPP5_GE1_TXD1, > - MPP6_GE1_TXD2, > - MPP7_GE1_TXD3, > - MPP8_GE1_RXD0, > - MPP9_GE1_RXD1, > - MPP10_GE1_RXD2, > - MPP11_GE1_RXD3, > - MPP12_GPIO, > - MPP13_GPIO, > - MPP14_GPIO, > - MPP15_GPIO, > - MPP16_GPIO, > - MPP17_GPIO, > - MPP18_GPIO, > - MPP19_GPIO, > - MPP20_GPIO, > - MPP21_GPIO, > - MPP22_GPIO, > - MPP23_GPIO, > - MPP24_UA2_TXD, > - MPP25_UA2_RXD, > - MPP26_UA2_CTSn, > - MPP27_UA2_RTSn, > - MPP28_GPIO, > - MPP29_GPIO, > - MPP30_GPIO, > - MPP31_GPIO, > - MPP32_GPIO, > - MPP33_GPIO, > - MPP34_GPIO, > - MPP35_GPIO, > - MPP36_GPIO, > - MPP37_GPIO, > - MPP38_GPIO, > - MPP39_GPIO, > - MPP40_GPIO, > - MPP41_GPIO, > - MPP42_GPIO, > - MPP43_GPIO, > - MPP44_GPIO, > - MPP45_GPIO, > - MPP46_GPIO, > - MPP47_GPIO, > - MPP48_GPIO, > - MPP49_GPIO, > - 0 > -}; > - > -static struct gpio_keys_button tswxl_buttons[] = { > - { > - .code = KEY_OPTION, > - .gpio = TSWXL_AUTO_SWITCH, > - .desc = "Power-auto Switch", > - .active_low = 1, > - } > -}; > - > -static struct gpio_keys_platform_data tswxl_button_data = { > - .buttons = tswxl_buttons, > - .nbuttons = ARRAY_SIZE(tswxl_buttons), > -}; > - > -static struct platform_device tswxl_button_device = { > - .name = "gpio-keys", > - .id = -1, > - .num_resources = 0, > - .dev = { > - .platform_data = &tswxl_button_data, > - }, > -}; > - > -static void __init wxl_init(void) > -{ > - /* > - * Basic MV78xx0 setup. Needs to be called early. > - */ > - mv78xx0_init(); > - mv78xx0_mpp_conf(wxl_mpp_config); > - > - /* > - * Partition on-chip peripherals between the two CPU cores. > - */ > - mv78xx0_ehci0_init(); > - mv78xx0_ehci1_init(); > - mv78xx0_ge00_init(&db78x00_ge00_data); > - mv78xx0_ge01_init(&db78x00_ge01_data); > - mv78xx0_sata_init(&db78x00_sata_data); > - mv78xx0_uart0_init(); > - mv78xx0_uart1_init(); > - mv78xx0_uart2_init(); > - mv78xx0_uart3_init(); > - mv78xx0_xor_init(); > - mv78xx0_crypto_init(); > - mv78xx0_i2c_init(); > - i2c_register_board_info(0, &db78x00_i2c_rtc, 1); > - > - //enable both usb ports > - gpio_direction_output(TSWXL_USB_POWER1, 1); > - gpio_direction_output(TSWXL_USB_POWER2, 1); > - > - //enable rear switch > - platform_device_register(&tswxl_button_device); > -} > - > -static int __init wxl_pci_init(void) > -{ > - if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0) > - mv78xx0_pcie_init(1, 1); > - > - return 0; > -} > -subsys_initcall(wxl_pci_init); > - > -MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") > - /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */ > - .atag_offset = 0x100, > - .nr_irqs = MV78XX0_NR_IRQS, > - .init_machine = wxl_init, > - .map_io = mv78xx0_map_io, > - .init_early = mv78xx0_init_early, > - .init_irq = mv78xx0_init_irq, > - .init_time = mv78xx0_timer_init, > - .restart = mv78xx0_restart, > -MACHINE_END > diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c > deleted file mode 100644 > index 679753fcc0ef..000000000000 > --- a/arch/arm/mach-mv78xx0/common.c > +++ /dev/null > @@ -1,444 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-mv78xx0/common.c > - * > - * Core functions for Marvell MV78xx0 SoCs > - */ > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/io.h> > -#include <linux/platform_device.h> > -#include <linux/serial_8250.h> > -#include <linux/ata_platform.h> > -#include <linux/clk-provider.h> > -#include <linux/ethtool.h> > -#include <asm/hardware/cache-feroceon-l2.h> > -#include <asm/mach/map.h> > -#include <asm/mach/time.h> > -#include <linux/platform_data/usb-ehci-orion.h> > -#include <linux/platform_data/mtd-orion_nand.h> > -#include <plat/time.h> > -#include <plat/common.h> > -#include <plat/addr-map.h> > -#include "mv78xx0.h" > -#include "bridge-regs.h" > -#include "common.h" > - > -static int get_tclk(void); > - > -/***************************************************************************** > - * Common bits > - ****************************************************************************/ > -int mv78xx0_core_index(void) > -{ > - u32 extra; > - > - /* > - * Read Extra Features register. > - */ > - __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra)); > - > - return !!(extra & 0x00004000); > -} > - > -static int get_hclk(void) > -{ > - int hclk; > - > - /* > - * HCLK tick rate is configured by DEV_D[7:5] pins. > - */ > - switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) { > - case 0: > - hclk = 166666667; > - break; > - case 1: > - hclk = 200000000; > - break; > - case 2: > - hclk = 266666667; > - break; > - case 3: > - hclk = 333333333; > - break; > - case 4: > - hclk = 400000000; > - break; > - default: > - panic("unknown HCLK PLL setting: %.8x\n", > - readl(SAMPLE_AT_RESET_LOW)); > - } > - > - return hclk; > -} > - > -static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk) > -{ > - u32 cfg; > - > - /* > - * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1 > - * PCLK/L2CLK by bits [19:14]. > - */ > - if (core_index == 0) { > - cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f; > - } else { > - cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f; > - } > - > - /* > - * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK > - * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6). > - */ > - *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1; > - > - /* > - * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK > - * ratio (1, 2, 3). > - */ > - *l2clk = *pclk / (((cfg >> 4) & 3) + 1); > -} > - > -static int get_tclk(void) > -{ > - int tclk_freq; > - > - /* > - * TCLK tick rate is configured by DEV_A[2:0] strap pins. > - */ > - switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) { > - case 1: > - tclk_freq = 166666667; > - break; > - case 3: > - tclk_freq = 200000000; > - break; > - default: > - panic("unknown TCLK PLL setting: %.8x\n", > - readl(SAMPLE_AT_RESET_HIGH)); > - } > - > - return tclk_freq; > -} > - > - > -/***************************************************************************** > - * I/O Address Mapping > - ****************************************************************************/ > -static struct map_desc mv78xx0_io_desc[] __initdata = { > - { > - .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, > - .pfn = 0, > - .length = MV78XX0_CORE_REGS_SIZE, > - .type = MT_DEVICE, > - }, { > - .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, > - .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), > - .length = MV78XX0_REGS_SIZE, > - .type = MT_DEVICE, > - }, > -}; > - > -void __init mv78xx0_map_io(void) > -{ > - unsigned long phys; > - > - /* > - * Map the right set of per-core registers depending on > - * which core we are running on. > - */ > - if (mv78xx0_core_index() == 0) { > - phys = MV78XX0_CORE0_REGS_PHYS_BASE; > - } else { > - phys = MV78XX0_CORE1_REGS_PHYS_BASE; > - } > - mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys); > - > - iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc)); > -} > - > - > -/***************************************************************************** > - * CLK tree > - ****************************************************************************/ > -static struct clk *tclk; > - > -static void __init clk_init(void) > -{ > - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk()); > - > - orion_clkdev_init(tclk); > -} > - > -/***************************************************************************** > - * EHCI > - ****************************************************************************/ > -void __init mv78xx0_ehci0_init(void) > -{ > - orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); > -} > - > - > -/***************************************************************************** > - * EHCI1 > - ****************************************************************************/ > -void __init mv78xx0_ehci1_init(void) > -{ > - orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); > -} > - > - > -/***************************************************************************** > - * EHCI2 > - ****************************************************************************/ > -void __init mv78xx0_ehci2_init(void) > -{ > - orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); > -} > - > - > -/***************************************************************************** > - * GE00 > - ****************************************************************************/ > -void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - orion_ge00_init(eth_data, > - GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, > - IRQ_MV78XX0_GE_ERR, > - MV643XX_TX_CSUM_DEFAULT_LIMIT); > -} > - > - > -/***************************************************************************** > - * GE01 > - ****************************************************************************/ > -void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - orion_ge01_init(eth_data, > - GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, > - MV643XX_TX_CSUM_DEFAULT_LIMIT); > -} > - > - > -/***************************************************************************** > - * GE10 > - ****************************************************************************/ > -void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - u32 dev, rev; > - > - /* > - * On the Z0, ge10 and ge11 are internally connected back > - * to back, and not brought out. > - */ > - mv78xx0_pcie_id(&dev, &rev); > - if (dev == MV78X00_Z0_DEV_ID) { > - eth_data->phy_addr = MV643XX_ETH_PHY_NONE; > - eth_data->speed = SPEED_1000; > - eth_data->duplex = DUPLEX_FULL; > - } > - > - orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM); > -} > - > - > -/***************************************************************************** > - * GE11 > - ****************************************************************************/ > -void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - u32 dev, rev; > - > - /* > - * On the Z0, ge10 and ge11 are internally connected back > - * to back, and not brought out. > - */ > - mv78xx0_pcie_id(&dev, &rev); > - if (dev == MV78X00_Z0_DEV_ID) { > - eth_data->phy_addr = MV643XX_ETH_PHY_NONE; > - eth_data->speed = SPEED_1000; > - eth_data->duplex = DUPLEX_FULL; > - } > - > - orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM); > -} > - > -/***************************************************************************** > - * I2C > - ****************************************************************************/ > -void __init mv78xx0_i2c_init(void) > -{ > - orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); > - orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); > -} > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) > -{ > - orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); > -} > - > - > -/***************************************************************************** > - * UART0 > - ****************************************************************************/ > -void __init mv78xx0_uart0_init(void) > -{ > - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, > - IRQ_MV78XX0_UART_0, tclk); > -} > - > - > -/***************************************************************************** > - * UART1 > - ****************************************************************************/ > -void __init mv78xx0_uart1_init(void) > -{ > - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, > - IRQ_MV78XX0_UART_1, tclk); > -} > - > - > -/***************************************************************************** > - * UART2 > - ****************************************************************************/ > -void __init mv78xx0_uart2_init(void) > -{ > - orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, > - IRQ_MV78XX0_UART_2, tclk); > -} > - > -/***************************************************************************** > - * UART3 > - ****************************************************************************/ > -void __init mv78xx0_uart3_init(void) > -{ > - orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, > - IRQ_MV78XX0_UART_3, tclk); > -} > - > -/***************************************************************************** > - * Time handling > - ****************************************************************************/ > -void __init mv78xx0_init_early(void) > -{ > - orion_time_set_base(TIMER_VIRT_BASE); > - if (mv78xx0_core_index() == 0) > - mvebu_mbus_init("marvell,mv78xx0-mbus", > - BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, > - DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); > - else > - mvebu_mbus_init("marvell,mv78xx0-mbus", > - BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, > - DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); > -} > - > -void __ref mv78xx0_timer_init(void) > -{ > - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, > - IRQ_MV78XX0_TIMER_1, get_tclk()); > -} > - > -/**************************************************************************** > -* XOR engine > -****************************************************************************/ > -void __init mv78xx0_xor_init(void) > -{ > - orion_xor0_init(XOR_PHYS_BASE, > - XOR_PHYS_BASE + 0x200, > - IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1); > -} > - > -/**************************************************************************** > - * Cryptographic Engines and Security Accelerator (CESA) > -****************************************************************************/ > -void __init mv78xx0_crypto_init(void) > -{ > - mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET, > - MV78XX0_MBUS_SRAM_ATTR, > - MV78XX0_SRAM_PHYS_BASE, > - MV78XX0_SRAM_SIZE); > - orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE, > - SZ_8K, IRQ_MV78XX0_CRYPTO); > -} > - > - > -/***************************************************************************** > - * General > - ****************************************************************************/ > -static char * __init mv78xx0_id(void) > -{ > - u32 dev, rev; > - > - mv78xx0_pcie_id(&dev, &rev); > - > - if (dev == MV78X00_Z0_DEV_ID) { > - if (rev == MV78X00_REV_Z0) > - return "MV78X00-Z0"; > - else > - return "MV78X00-Rev-Unsupported"; > - } else if (dev == MV78100_DEV_ID) { > - if (rev == MV78100_REV_A0) > - return "MV78100-A0"; > - else if (rev == MV78100_REV_A1) > - return "MV78100-A1"; > - else > - return "MV78100-Rev-Unsupported"; > - } else if (dev == MV78200_DEV_ID) { > - if (rev == MV78100_REV_A0) > - return "MV78200-A0"; > - else > - return "MV78200-Rev-Unsupported"; > - } else { > - return "Device-Unknown"; > - } > -} > - > -static int __init is_l2_writethrough(void) > -{ > - return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); > -} > - > -void __init mv78xx0_init(void) > -{ > - int core_index; > - int hclk; > - int pclk; > - int l2clk; > - > - core_index = mv78xx0_core_index(); > - hclk = get_hclk(); > - get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); > - > - printk(KERN_INFO "%s ", mv78xx0_id()); > - printk("core #%d, ", core_index); > - printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); > - printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); > - printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); > - printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); > - > - if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) > - feroceon_l2_init(is_l2_writethrough()); > - > - /* Setup root of clk tree */ > - clk_init(); > -} > - > -void mv78xx0_restart(enum reboot_mode mode, const char *cmd) > -{ > - /* > - * Enable soft reset to assert RSTOUTn. > - */ > - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); > - > - /* > - * Assert soft reset. > - */ > - writel(SOFT_RESET, SYSTEM_SOFT_RESET); > - > - while (1) > - ; > -} > diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h > deleted file mode 100644 > index 9f1dfd595003..000000000000 > --- a/arch/arm/mach-mv78xx0/common.h > +++ /dev/null > @@ -1,54 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* > - * arch/arm/mach-mv78xx0/common.h > - * > - * Core functions for Marvell MV78xx0 SoCs > - */ > - > -#ifndef __ARCH_MV78XX0_COMMON_H > -#define __ARCH_MV78XX0_COMMON_H > - > -#include <linux/reboot.h> > - > -struct mv643xx_eth_platform_data; > -struct mv_sata_platform_data; > - > -/* > - * Basic MV78xx0 init functions used early by machine-setup. > - */ > -int mv78xx0_core_index(void); > -void mv78xx0_map_io(void); > -void mv78xx0_init(void); > -void mv78xx0_init_early(void); > -void mv78xx0_init_irq(void); > - > -void mv78xx0_setup_cpu_mbus(void); > -void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, > - int maj, int min); > -void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, > - int maj, int min); > - > -void mv78xx0_pcie_id(u32 *dev, u32 *rev); > - > -void mv78xx0_ehci0_init(void); > -void mv78xx0_ehci1_init(void); > -void mv78xx0_ehci2_init(void); > -void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data); > -void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data); > -void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data); > -void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data); > -void mv78xx0_pcie_init(int init_port0, int init_port1); > -void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data); > -void mv78xx0_uart0_init(void); > -void mv78xx0_uart1_init(void); > -void mv78xx0_uart2_init(void); > -void mv78xx0_uart3_init(void); > -void mv78xx0_xor_init(void); > -void mv78xx0_crypto_init(void); > -void mv78xx0_i2c_init(void); > -void mv78xx0_restart(enum reboot_mode, const char *); > - > -extern void mv78xx0_timer_init(void); > - > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c > deleted file mode 100644 > index 6e42f6446637..000000000000 > --- a/arch/arm/mach-mv78xx0/irq.c > +++ /dev/null > @@ -1,69 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-mv78xx0/irq.c > - * > - * MV78xx0 IRQ handling. > - */ > -#include <linux/gpio/consumer.h> > -#include <linux/kernel.h> > -#include <linux/irq.h> > -#include <linux/io.h> > -#include <asm/exception.h> > -#include <plat/orion-gpio.h> > -#include <plat/irq.h> > -#include "bridge-regs.h" > -#include "common.h" > - > -static int __initdata gpio0_irqs[4] = { > - IRQ_MV78XX0_GPIO_0_7, > - IRQ_MV78XX0_GPIO_8_15, > - IRQ_MV78XX0_GPIO_16_23, > - IRQ_MV78XX0_GPIO_24_31, > -}; > - > -static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE; > - > -static asmlinkage void > -__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs) > -{ > - u32 stat; > - > - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF); > - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF); > - if (stat) { > - unsigned int hwirq = __fls(stat); > - handle_IRQ(hwirq, regs); > - return; > - } > - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF); > - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF); > - if (stat) { > - unsigned int hwirq = 32 + __fls(stat); > - handle_IRQ(hwirq, regs); > - return; > - } > - stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF); > - stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF); > - if (stat) { > - unsigned int hwirq = 64 + __fls(stat); > - handle_IRQ(hwirq, regs); > - return; > - } > -} > - > -void __init mv78xx0_init_irq(void) > -{ > - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); > - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); > - orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF); > - > - set_handle_irq(mv78xx0_legacy_handle_irq); > - > - /* > - * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask > - * registers for core #1 are at an offset of 0x18 from those of > - * core #0.) > - */ > - orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0, > - IRQ_MV78XX0_GPIO_START, gpio0_irqs); > -} > diff --git a/arch/arm/mach-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/irqs.h > deleted file mode 100644 > index 12b357d383d8..000000000000 > --- a/arch/arm/mach-mv78xx0/irqs.h > +++ /dev/null > @@ -1,87 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* IRQ definitions for Marvell MV78xx0 SoCs */ > - > -#ifndef __ASM_ARCH_IRQS_H > -#define __ASM_ARCH_IRQS_H > - > -/* > - * MV78xx0 Low Interrupt Controller > - */ > -#define IRQ_MV78XX0_ERR 0 > -#define IRQ_MV78XX0_SPI 1 > -#define IRQ_MV78XX0_I2C_0 2 > -#define IRQ_MV78XX0_I2C_1 3 > -#define IRQ_MV78XX0_IDMA_0 4 > -#define IRQ_MV78XX0_IDMA_1 5 > -#define IRQ_MV78XX0_IDMA_2 6 > -#define IRQ_MV78XX0_IDMA_3 7 > -#define IRQ_MV78XX0_TIMER_0 8 > -#define IRQ_MV78XX0_TIMER_1 9 > -#define IRQ_MV78XX0_TIMER_2 10 > -#define IRQ_MV78XX0_TIMER_3 11 > -#define IRQ_MV78XX0_UART_0 12 > -#define IRQ_MV78XX0_UART_1 13 > -#define IRQ_MV78XX0_UART_2 14 > -#define IRQ_MV78XX0_UART_3 15 > -#define IRQ_MV78XX0_USB_0 16 > -#define IRQ_MV78XX0_USB_1 17 > -#define IRQ_MV78XX0_USB_2 18 > -#define IRQ_MV78XX0_CRYPTO 19 > -#define IRQ_MV78XX0_SDIO_0 20 > -#define IRQ_MV78XX0_SDIO_1 21 > -#define IRQ_MV78XX0_XOR_0 22 > -#define IRQ_MV78XX0_XOR_1 23 > -#define IRQ_MV78XX0_I2S_0 24 > -#define IRQ_MV78XX0_I2S_1 25 > -#define IRQ_MV78XX0_SATA 26 > -#define IRQ_MV78XX0_TDMI 27 > - > -/* > - * MV78xx0 High Interrupt Controller > - */ > -#define IRQ_MV78XX0_PCIE_00 32 > -#define IRQ_MV78XX0_PCIE_01 33 > -#define IRQ_MV78XX0_PCIE_02 34 > -#define IRQ_MV78XX0_PCIE_03 35 > -#define IRQ_MV78XX0_PCIE_10 36 > -#define IRQ_MV78XX0_PCIE_11 37 > -#define IRQ_MV78XX0_PCIE_12 38 > -#define IRQ_MV78XX0_PCIE_13 39 > -#define IRQ_MV78XX0_GE00_SUM 40 > -#define IRQ_MV78XX0_GE00_RX 41 > -#define IRQ_MV78XX0_GE00_TX 42 > -#define IRQ_MV78XX0_GE00_MISC 43 > -#define IRQ_MV78XX0_GE01_SUM 44 > -#define IRQ_MV78XX0_GE01_RX 45 > -#define IRQ_MV78XX0_GE01_TX 46 > -#define IRQ_MV78XX0_GE01_MISC 47 > -#define IRQ_MV78XX0_GE10_SUM 48 > -#define IRQ_MV78XX0_GE10_RX 49 > -#define IRQ_MV78XX0_GE10_TX 50 > -#define IRQ_MV78XX0_GE10_MISC 51 > -#define IRQ_MV78XX0_GE11_SUM 52 > -#define IRQ_MV78XX0_GE11_RX 53 > -#define IRQ_MV78XX0_GE11_TX 54 > -#define IRQ_MV78XX0_GE11_MISC 55 > -#define IRQ_MV78XX0_GPIO_0_7 56 > -#define IRQ_MV78XX0_GPIO_8_15 57 > -#define IRQ_MV78XX0_GPIO_16_23 58 > -#define IRQ_MV78XX0_GPIO_24_31 59 > -#define IRQ_MV78XX0_DB_IN 60 > -#define IRQ_MV78XX0_DB_OUT 61 > - > -/* > - * MV78xx0 Error Interrupt Controller > - */ > -#define IRQ_MV78XX0_GE_ERR 70 > - > -/* > - * MV78XX0 General Purpose Pins > - */ > -#define IRQ_MV78XX0_GPIO_START 96 > -#define NR_GPIO_IRQS 32 > - > -#define MV78XX0_NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) > - > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c > deleted file mode 100644 > index 32bf590d79fe..000000000000 > --- a/arch/arm/mach-mv78xx0/mpp.c > +++ /dev/null > @@ -1,34 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-mv78x00/mpp.c > - * > - * MPP functions for Marvell MV78x00 SoCs > - */ > -#include <linux/gpio/consumer.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/io.h> > -#include <plat/mpp.h> > -#include "mv78xx0.h" > -#include "common.h" > -#include "mpp.h" > - > -static unsigned int __init mv78xx0_variant(void) > -{ > - u32 dev, rev; > - > - mv78xx0_pcie_id(&dev, &rev); > - > - if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0) > - return MPP_78100_A0_MASK; > - > - printk(KERN_ERR "MPP setup: unknown mv78x00 variant " > - "(dev %#x rev %#x)\n", dev, rev); > - return 0; > -} > - > -void __init mv78xx0_mpp_conf(unsigned int *mpp_list) > -{ > - orion_mpp_conf(mpp_list, mv78xx0_variant(), > - MPP_MAX, DEV_BUS_VIRT_BASE); > -} > diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h > deleted file mode 100644 > index 47db52f45546..000000000000 > --- a/arch/arm/mach-mv78xx0/mpp.h > +++ /dev/null > @@ -1,337 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* > - * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins > - * > - * sebastien requiem <sebastien@requiem.fr> > - */ > - > -#ifndef __MV78X00_MPP_H > -#define __MV78X00_MPP_H > - > -#define MPP(_num, _sel, _in, _out, _78100_A0) (\ > - /* MPP number */ ((_num) & 0xff) | \ > - /* MPP select value */ (((_sel) & 0xf) << 8) | \ > - /* may be input signal */ ((!!(_in)) << 12) | \ > - /* may be output signal */ ((!!(_out)) << 13) | \ > - /* available on A0 */ ((!!(_78100_A0)) << 14)) > - > - /* num sel i o 78100_A0 */ > - > -#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1) > - > -#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1) > -#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1) > -#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1) > -#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1) > - > -#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1) > -#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1) > -#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1) > -#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1) > - > -#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1) > -#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1) > -#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1) > -#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1) > - > -#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1) > -#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1) > -#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1) > -#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1) > - > -#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1) > -#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1) > -#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1) > -#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1) > - > -#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1) > -#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1) > -#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1) > -#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1) > - > -#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1) > -#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1) > -#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1) > -#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1) > - > -#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1) > -#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1) > -#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1) > -#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1) > - > -#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1) > -#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1) > -#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1) > -#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1) > - > -#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1) > -#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1) > -#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1) > -#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1) > - > -#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1) > -#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1) > -#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1) > -#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1) > - > -#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1) > -#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1) > -#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1) > -#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1) > - > -#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1) > -#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1) > -#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1) > -#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1) > -#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1) > -#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1) > - > -#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1) > -#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1) > -#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1) > -#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1) > -#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1) > -#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1) > - > -#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1) > -#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1) > -#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1) > -#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1) > -#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1) > -#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1) > - > -#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1) > -#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1) > -#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1) > -#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1) > -#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1) > -#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1) > - > -#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1) > -#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1) > -#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1) > -#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1) > -#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1) > -#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1) > - > - > -#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1) > -#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1) > -#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1) > -#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1) > -#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1) > -#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1) > - > - > -#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1) > -#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1) > -#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1) > -#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1) > - > - > - > -#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1) > -#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1) > -#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1) > -#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1) > - > - > -#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1) > -#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1) > -#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0) > -#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1) > - > - > - > -#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1) > -#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1) > -#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0) > -#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1) > - > - > - > -#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1) > -#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1) > -#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1) > -#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1) > -#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1) > - > - > - > -#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1) > -#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1) > -#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1) > -#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1) > -#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1) > - > - > -#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1) > -#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1) > -#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1) > -#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1) > - > - > -#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1) > -#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1) > -#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1) > -#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1) > - > - > -#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1) > -#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1) > -#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1) > -#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1) > - > - > -#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1) > -#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1) > -#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1) > -#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1) > - > - > -#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1) > -#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1) > -#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1) > -#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1) > - > -#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1) > -#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1) > -#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1) > -#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1) > -#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1) > - > -#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1) > -#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1) > -#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1) > - > -#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1) > -#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1) > -#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1) > -#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1) > - > - > -#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1) > -#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1) > -#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1) > -#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1) > -#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1) > - > - > -#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1) > -#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1) > -#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1) > -#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1) > - > - > - > -#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1) > -#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1) > -#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1) > -#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1) > - > - > - > -#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1) > -#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1) > -#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1) > -#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1) > - > -#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1) > -#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1) > -#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1) > -#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1) > -#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1) > - > - > -#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1) > -#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1) > -#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1) > -#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1) > -#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1) > -#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1) > - > - > - > - > -#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1) > -#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1) > -#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1) > -#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1) > -#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1) > -#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1) > - > - > - > - > -#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1) > -#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1) > -#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1) > -#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1) > -#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1) > -#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1) > - > - > - > -#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1) > -#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1) > -#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1) > - > - > - > -#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1) > -#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1) > -#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1) > - > - > - > -#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1) > -#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1) > -#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1) > - > - > - > -#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1) > -#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1) > -#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1) > - > - > - > -#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1) > -#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1) > -#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1) > - > - > - > -#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1) > -#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1) > -#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1) > -#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1) > - > - > -#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1) > -#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1) > -#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1) > - > - > -#define MPP47_GPIO MPP(47, 0x1, 1, 1, 1) > -#define MPP47_UNUSED MPP(47, 0x0, 0, 0, 1) > - > - > - > -#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1) > -#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1) > -#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1) > - > - > - > -#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1) > -#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1) > -#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1) > -#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1) > - > - > -#define MPP_MAX 49 > - > -void mv78xx0_mpp_conf(unsigned int *mpp_list); > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h > deleted file mode 100644 > index 88efb1e44142..000000000000 > --- a/arch/arm/mach-mv78xx0/mv78xx0.h > +++ /dev/null > @@ -1,134 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0-only */ > -/* > - * Generic definitions for Marvell MV78xx0 SoC flavors: > - * MV781x0 and MV782x0. > - */ > - > -#ifndef __ASM_ARCH_MV78XX0_H > -#define __ASM_ARCH_MV78XX0_H > - > -#include "irqs.h" > - > -/* > - * Marvell MV78xx0 address maps. > - * > - * phys > - * c0000000 PCIe Memory space > - * f0800000 PCIe #0 I/O space > - * f0900000 PCIe #1 I/O space > - * f0a00000 PCIe #2 I/O space > - * f0b00000 PCIe #3 I/O space > - * f0c00000 PCIe #4 I/O space > - * f0d00000 PCIe #5 I/O space > - * f0e00000 PCIe #6 I/O space > - * f0f00000 PCIe #7 I/O space > - * f1000000 on-chip peripheral registers > - * > - * virt phys size > - * fe400000 f102x000 16K core-specific peripheral registers > - * fee00000 f0800000 64K PCIe #0 I/O space > - * fee10000 f0900000 64K PCIe #1 I/O space > - * fee20000 f0a00000 64K PCIe #2 I/O space > - * fee30000 f0b00000 64K PCIe #3 I/O space > - * fee40000 f0c00000 64K PCIe #4 I/O space > - * fee50000 f0d00000 64K PCIe #5 I/O space > - * fee60000 f0e00000 64K PCIe #6 I/O space > - * fee70000 f0f00000 64K PCIe #7 I/O space > - * fec00000 f1000000 1M on-chip peripheral registers > - */ > -#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 > -#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 > -#define MV78XX0_CORE_REGS_VIRT_BASE IOMEM(0xfe400000) > -#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 > -#define MV78XX0_CORE_REGS_SIZE SZ_16K > - > -#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) > -#define MV78XX0_PCIE_IO_SIZE SZ_1M > - > -#define MV78XX0_REGS_PHYS_BASE 0xf1000000 > -#define MV78XX0_REGS_VIRT_BASE IOMEM(0xfec00000) > -#define MV78XX0_REGS_SIZE SZ_1M > - > -#define MV78XX0_SRAM_PHYS_BASE (0xf2200000) > -#define MV78XX0_SRAM_SIZE SZ_8K > - > -#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 > -#define MV78XX0_PCIE_MEM_SIZE 0x30000000 > - > -#define MV78XX0_MBUS_SRAM_TARGET 0x09 > -#define MV78XX0_MBUS_SRAM_ATTR 0x00 > - > -/* > - * Core-specific peripheral registers. > - */ > -#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) > -#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) > -#define BRIDGE_WINS_CPU0_BASE (MV78XX0_CORE0_REGS_PHYS_BASE) > -#define BRIDGE_WINS_CPU1_BASE (MV78XX0_CORE1_REGS_PHYS_BASE) > -#define BRIDGE_WINS_SZ (0xA000) > - > -/* > - * Register Map > - */ > -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) > -#define DDR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x00000) > -#define DDR_WINDOW_CPU0_BASE (DDR_PHYS_BASE + 0x1500) > -#define DDR_WINDOW_CPU1_BASE (DDR_PHYS_BASE + 0x1570) > -#define DDR_WINDOW_CPU_SZ (0x20) > - > -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) > -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) > -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE + 0x0030) > -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE + 0x0034) > -#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) > -#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) > -#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1100) > -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) > -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) > -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) > -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) > -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2200) > -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2200) > -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2300) > -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2300) > - > -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x30000) > -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x34000) > - > -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x40000) > -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x44000) > -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x48000) > -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x4c000) > - > -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x50000) > -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x51000) > -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x52000) > - > -#define XOR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x60900) > - > -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x70000) > -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x74000) > - > -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x80000) > -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x84000) > -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x88000) > -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x8c000) > - > -#define CRYPTO_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x90000) > - > -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0xa0000) > - > -/* > - * Supported devices and revisions. > - */ > -#define MV78X00_Z0_DEV_ID 0x6381 > -#define MV78X00_REV_Z0 1 > - > -#define MV78100_DEV_ID 0x7810 > -#define MV78100_REV_A0 1 > -#define MV78100_REV_A1 2 > - > -#define MV78200_DEV_ID 0x7820 > -#define MV78200_REV_A0 1 > - > -#endif > diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c > deleted file mode 100644 > index 533cb7856943..000000000000 > --- a/arch/arm/mach-mv78xx0/pcie.c > +++ /dev/null > @@ -1,280 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-mv78xx0/pcie.c > - * > - * PCIe functions for Marvell MV78xx0 SoCs > - */ > - > -#include <linux/kernel.h> > -#include <linux/pci.h> > -#include <linux/mbus.h> > -#include <video/vga.h> > -#include <asm/irq.h> > -#include <asm/mach/pci.h> > -#include <plat/pcie.h> > -#include "mv78xx0.h" > -#include "common.h" > - > -#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4) > -#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane))) > -#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4) > -#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane))) > - > -struct pcie_port { > - u8 maj; > - u8 min; > - u8 root_bus_nr; > - void __iomem *base; > - spinlock_t conf_lock; > - char mem_space_name[20]; > - struct resource res; > -}; > - > -static struct pcie_port pcie_port[8]; > -static int num_pcie_ports; > -static struct resource pcie_io_space; > - > -void __init mv78xx0_pcie_id(u32 *dev, u32 *rev) > -{ > - *dev = orion_pcie_dev_id(PCIE00_VIRT_BASE); > - *rev = orion_pcie_rev(PCIE00_VIRT_BASE); > -} > - > -u32 pcie_port_size[8] = { > - 0, > - 0x20000000, > - 0x10000000, > - 0x10000000, > - 0x08000000, > - 0x08000000, > - 0x08000000, > - 0x04000000, > -}; > - > -static void __init mv78xx0_pcie_preinit(void) > -{ > - int i; > - u32 size_each; > - u32 start; > - > - pcie_io_space.name = "PCIe I/O Space"; > - pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0); > - pcie_io_space.end = > - MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1; > - pcie_io_space.flags = IORESOURCE_MEM; > - if (request_resource(&iomem_resource, &pcie_io_space)) > - panic("can't allocate PCIe I/O space"); > - > - if (num_pcie_ports > 7) > - panic("invalid number of PCIe ports"); > - > - size_each = pcie_port_size[num_pcie_ports]; > - > - start = MV78XX0_PCIE_MEM_PHYS_BASE; > - for (i = 0; i < num_pcie_ports; i++) { > - struct pcie_port *pp = pcie_port + i; > - > - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), > - "PCIe %d.%d MEM", pp->maj, pp->min); > - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; > - pp->res.name = pp->mem_space_name; > - pp->res.flags = IORESOURCE_MEM; > - pp->res.start = start; > - pp->res.end = start + size_each - 1; > - start += size_each; > - > - if (request_resource(&iomem_resource, &pp->res)) > - panic("can't allocate PCIe MEM sub-space"); > - > - mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min), > - MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min), > - pp->res.start, resource_size(&pp->res)); > - mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min), > - MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min), > - i * SZ_64K, SZ_64K, 0); > - } > -} > - > -static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) > -{ > - struct pcie_port *pp; > - struct resource realio; > - > - if (nr >= num_pcie_ports) > - return 0; > - > - pp = &pcie_port[nr]; > - sys->private_data = pp; > - pp->root_bus_nr = sys->busnr; > - > - /* > - * Generic PCIe unit setup. > - */ > - orion_pcie_set_local_bus_nr(pp->base, sys->busnr); > - orion_pcie_setup(pp->base); > - > - realio.start = nr * SZ_64K; > - realio.end = realio.start + SZ_64K - 1; > - pci_remap_iospace(&realio, MV78XX0_PCIE_IO_PHYS_BASE(nr)); > - > - pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); > - > - return 1; > -} > - > -static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) > -{ > - /* > - * Don't go out when trying to access nonexisting devices > - * on the local bus. > - */ > - if (bus == pp->root_bus_nr && dev > 1) > - return 0; > - > - return 1; > -} > - > -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, > - int size, u32 *val) > -{ > - struct pci_sys_data *sys = bus->sysdata; > - struct pcie_port *pp = sys->private_data; > - unsigned long flags; > - int ret; > - > - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { > - *val = 0xffffffff; > - return PCIBIOS_DEVICE_NOT_FOUND; > - } > - > - spin_lock_irqsave(&pp->conf_lock, flags); > - ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); > - spin_unlock_irqrestore(&pp->conf_lock, flags); > - > - return ret; > -} > - > -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, > - int where, int size, u32 val) > -{ > - struct pci_sys_data *sys = bus->sysdata; > - struct pcie_port *pp = sys->private_data; > - unsigned long flags; > - int ret; > - > - if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) > - return PCIBIOS_DEVICE_NOT_FOUND; > - > - spin_lock_irqsave(&pp->conf_lock, flags); > - ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); > - spin_unlock_irqrestore(&pp->conf_lock, flags); > - > - return ret; > -} > - > -static struct pci_ops pcie_ops = { > - .read = pcie_rd_conf, > - .write = pcie_wr_conf, > -}; > - > -/* > - * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it > - * is operating as a root complex this needs to be switched to > - * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on > - * the device. Decoding setup is handled by the orion code. > - */ > -static void rc_pci_fixup(struct pci_dev *dev) > -{ > - if (dev->bus->parent == NULL && dev->devfn == 0) { > - struct resource *r; > - > - dev->class &= 0xff; > - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; > - pci_dev_for_each_resource(dev, r) { > - r->start = 0; > - r->end = 0; > - r->flags = 0; > - } > - } > -} > -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); > - > -static int __init mv78xx0_pcie_scan_bus(int nr, struct pci_host_bridge *bridge) > -{ > - struct pci_sys_data *sys = pci_host_bridge_priv(bridge); > - > - if (nr >= num_pcie_ports) { > - BUG(); > - return -EINVAL; > - } > - > - list_splice_init(&sys->resources, &bridge->windows); > - bridge->dev.parent = NULL; > - bridge->sysdata = sys; > - bridge->busnr = sys->busnr; > - bridge->ops = &pcie_ops; > - > - return pci_scan_root_bus_bridge(bridge); > -} > - > -static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot, > - u8 pin) > -{ > - struct pci_sys_data *sys = dev->bus->sysdata; > - struct pcie_port *pp = sys->private_data; > - > - return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min; > -} > - > -static struct hw_pci mv78xx0_pci __initdata = { > - .nr_controllers = 8, > - .preinit = mv78xx0_pcie_preinit, > - .setup = mv78xx0_pcie_setup, > - .scan = mv78xx0_pcie_scan_bus, > - .map_irq = mv78xx0_pcie_map_irq, > -}; > - > -static void __init add_pcie_port(int maj, int min, void __iomem *base) > -{ > - printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min); > - > - if (orion_pcie_link_up(base)) { > - struct pcie_port *pp = &pcie_port[num_pcie_ports++]; > - > - printk("link up\n"); > - > - pp->maj = maj; > - pp->min = min; > - pp->root_bus_nr = -1; > - pp->base = base; > - spin_lock_init(&pp->conf_lock); > - memset(&pp->res, 0, sizeof(pp->res)); > - } else { > - printk("link down, ignoring\n"); > - } > -} > - > -void __init mv78xx0_pcie_init(int init_port0, int init_port1) > -{ > - vga_base = MV78XX0_PCIE_MEM_PHYS_BASE; > - > - if (init_port0) { > - add_pcie_port(0, 0, PCIE00_VIRT_BASE); > - if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) { > - add_pcie_port(0, 1, PCIE01_VIRT_BASE); > - add_pcie_port(0, 2, PCIE02_VIRT_BASE); > - add_pcie_port(0, 3, PCIE03_VIRT_BASE); > - } > - } > - > - if (init_port1) { > - add_pcie_port(1, 0, PCIE10_VIRT_BASE); > - if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) { > - add_pcie_port(1, 1, PCIE11_VIRT_BASE); > - add_pcie_port(1, 2, PCIE12_VIRT_BASE); > - add_pcie_port(1, 3, PCIE13_VIRT_BASE); > - } > - } > - > - pci_common_init(&mv78xx0_pci); > -} > diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig > index c61999d01c80..78b8d59d7cc1 100644 > --- a/arch/arm/mach-orion5x/Kconfig > +++ b/arch/arm/mach-orion5x/Kconfig > @@ -37,60 +37,6 @@ config MACH_RD88F5182_DT > Say 'Y' here if you want your kernel to support the Marvell > Orion-NAS (88F5182) RD2, Flattened Device Tree. > > -config MACH_KUROBOX_PRO > - bool "KuroBox Pro (DEPRECATED)" > - select I2C_BOARDINFO if I2C > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - KuroBox Pro platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_DNS323 > - bool "D-Link DNS-323 (DEPRECATED)" > - select I2C_BOARDINFO if I2C > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - D-Link DNS-323 platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_TS209 > - bool "QNAP TS-109/TS-209 (DEPRECATED)" > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - QNAP TS-109/TS-209 platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_TERASTATION_PRO2 > - bool "Buffalo Terastation Pro II/Live (DEPRECATED)" > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - Buffalo Terastation Pro II/Live platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_LINKSTATION_PRO > - bool "Buffalo Linkstation Pro/Live (DEPRECATED)" > - depends on ATAGS > - select I2C_BOARDINFO if I2C > - help > - Say 'Y' here if you want your kernel to support the > - Buffalo Linkstation Pro/Live platform. Both v1 and > - v2 devices are supported. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > config MACH_LINKSTATION_MINI > bool "Buffalo Linkstation Mini (Flattened Device Tree)" > select ARCH_ORION5X_DT > @@ -98,36 +44,6 @@ config MACH_LINKSTATION_MINI > Say 'Y' here if you want your kernel to support the > Buffalo Linkstation Mini (LS-WSGL) platform. > > -config MACH_TS409 > - bool "QNAP TS-409 (DEPRECATED)" > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - QNAP TS-409 platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_TS78XX > - bool "Technologic Systems TS-78xx (DEPRECATED)" > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - Technologic Systems TS-78xx platform. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > -config MACH_MV2120 > - bool "HP Media Vault mv2120 (DEPRECATED)" > - depends on ATAGS > - help > - Say 'Y' here if you want your kernel to support the > - HP Media Vault mv2120 or mv5100. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > config MACH_D2NET_DT > bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" > select ARCH_ORION5X_DT > @@ -135,17 +51,6 @@ config MACH_D2NET_DT > Say 'Y' here if you want your kernel to support the > LaCie d2 Network NAS. > > -config MACH_NET2BIG > - bool "LaCie 2Big Network (DEPRECATED)" > - depends on ATAGS > - select I2C_BOARDINFO if I2C > - help > - Say 'Y' here if you want your kernel to support the > - LaCie 2Big Network NAS. > - > - Support for this machine will go away in early 2027, > - unless it gets converted to device tree. > - > config MACH_MSS2_DT > bool "Maxtor Shared Storage II (Flattened Device Tree)" > select ARCH_ORION5X_DT > diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile > index 6f54d7fef27a..7e9634e04318 100644 > --- a/arch/arm/mach-orion5x/Makefile > +++ b/arch/arm/mach-orion5x/Makefile > @@ -2,15 +2,6 @@ > ccflags-y := -I$(srctree)/arch/arm/plat-orion/include > > obj-y += common.o pci.o irq.o mpp.o > -obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o > -obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o > -obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o > -obj-$(CONFIG_MACH_DNS323) += dns323-setup.o > -obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o > -obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o > -obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o > -obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o > -obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o > > obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o > obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o > diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c > index be47492c6640..2614213e2cbc 100644 > --- a/arch/arm/mach-orion5x/board-dt.c > +++ b/arch/arm/mach-orion5x/board-dt.c > @@ -18,7 +18,6 @@ > #include <asm/mach/arch.h> > #include <asm/mach/map.h> > #include <plat/irq.h> > -#include <plat/time.h> > #include "orion5x.h" > #include "bridge-regs.h" > #include "common.h" > @@ -39,7 +38,7 @@ static void __init orion5x_dt_init(void) > u32 dev, rev; > > orion5x_id(&dev, &rev, &dev_name); > - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); > + printk(KERN_INFO "Orion ID: %s.\n", dev_name); > > BUG_ON(mvebu_mbus_dt_init(false)); > > diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c > index df056d60b675..050a95af2bbf 100644 > --- a/arch/arm/mach-orion5x/common.c > +++ b/arch/arm/mach-orion5x/common.c > @@ -7,27 +7,16 @@ > * Maintainer: Tzachi Perelstein <tzachi@marvell.com> > */ > > +#include <linux/delay.h> > #include <linux/kernel.h> > #include <linux/init.h> > #include <linux/io.h> > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/serial_8250.h> > -#include <linux/mv643xx_i2c.h> > -#include <linux/ata_platform.h> > -#include <linux/delay.h> > -#include <linux/clk-provider.h> > -#include <linux/cpu.h> > +#include <linux/mbus.h> > #include <asm/page.h> > #include <asm/setup.h> > -#include <asm/system_misc.h> > #include <asm/mach/arch.h> > #include <asm/mach/map.h> > #include <asm/mach/time.h> > -#include <linux/platform_data/mtd-orion_nand.h> > -#include <linux/platform_data/usb-ehci-orion.h> > -#include <plat/time.h> > -#include <plat/common.h> > > #include "bridge-regs.h" > #include "common.h" > @@ -55,167 +44,6 @@ void __init orion5x_map_io(void) > iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); > } > > - > -/***************************************************************************** > - * CLK tree > - ****************************************************************************/ > -static struct clk *tclk; > - > -void __init clk_init(void) > -{ > - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, orion5x_tclk); > - > - orion_clkdev_init(tclk); > -} > - > -/***************************************************************************** > - * EHCI0 > - ****************************************************************************/ > -void __init orion5x_ehci0_init(void) > -{ > - orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL, > - EHCI_PHY_ORION); > -} > - > - > -/***************************************************************************** > - * EHCI1 > - ****************************************************************************/ > -void __init orion5x_ehci1_init(void) > -{ > - orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); > -} > - > - > -/***************************************************************************** > - * GE00 > - ****************************************************************************/ > -void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) > -{ > - orion_ge00_init(eth_data, > - ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, > - IRQ_ORION5X_ETH_ERR, > - MV643XX_TX_CSUM_DEFAULT_LIMIT); > -} > - > - > -/***************************************************************************** > - * I2C > - ****************************************************************************/ > -void __init orion5x_i2c_init(void) > -{ > - orion_i2c_init(I2C_PHYS_BASE, IRQ_ORION5X_I2C, 8); > - > -} > - > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) > -{ > - orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); > -} > - > - > -/***************************************************************************** > - * SPI > - ****************************************************************************/ > -void __init orion5x_spi_init(void) > -{ > - orion_spi_init(SPI_PHYS_BASE); > -} > - > - > -/***************************************************************************** > - * UART0 > - ****************************************************************************/ > -void __init orion5x_uart0_init(void) > -{ > - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, > - IRQ_ORION5X_UART0, tclk); > -} > - > -/***************************************************************************** > - * UART1 > - ****************************************************************************/ > -void __init orion5x_uart1_init(void) > -{ > - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, > - IRQ_ORION5X_UART1, tclk); > -} > - > -/***************************************************************************** > - * XOR engine > - ****************************************************************************/ > -void __init orion5x_xor_init(void) > -{ > - orion_xor0_init(ORION5X_XOR_PHYS_BASE, > - ORION5X_XOR_PHYS_BASE + 0x200, > - IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1); > -} > - > -/***************************************************************************** > - * Cryptographic Engines and Security Accelerator (CESA) > - ****************************************************************************/ > -static void __init orion5x_crypto_init(void) > -{ > - mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET, > - ORION_MBUS_SRAM_ATTR, > - ORION5X_SRAM_PHYS_BASE, > - ORION5X_SRAM_SIZE); > - orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, > - SZ_8K, IRQ_ORION5X_CESA); > -} > - > -/***************************************************************************** > - * Watchdog > - ****************************************************************************/ > -static struct resource orion_wdt_resource[] = { > - DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04), > - DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04), > -}; > - > -static struct platform_device orion_wdt_device = { > - .name = "orion_wdt", > - .id = -1, > - .num_resources = ARRAY_SIZE(orion_wdt_resource), > - .resource = orion_wdt_resource, > -}; > - > -static void __init orion5x_wdt_init(void) > -{ > - platform_device_register(&orion_wdt_device); > -} > - > - > -/***************************************************************************** > - * Time handling > - ****************************************************************************/ > -void __init orion5x_init_early(void) > -{ > - u32 rev, dev; > - const char *mbus_soc_name; > - > - orion_time_set_base(TIMER_VIRT_BASE); > - > - /* Initialize the MBUS driver */ > - orion5x_pcie_id(&dev, &rev); > - if (dev == MV88F5281_DEV_ID) > - mbus_soc_name = "marvell,orion5x-88f5281-mbus"; > - else if (dev == MV88F5182_DEV_ID) > - mbus_soc_name = "marvell,orion5x-88f5182-mbus"; > - else if (dev == MV88F5181_DEV_ID) > - mbus_soc_name = "marvell,orion5x-88f5181-mbus"; > - else if (dev == MV88F6183_DEV_ID) > - mbus_soc_name = "marvell,orion5x-88f6183-mbus"; > - else > - mbus_soc_name = NULL; > - mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE, > - ORION5X_BRIDGE_WINS_SZ, > - ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ); > -} > - > void orion5x_setup_wins(void) > { > /* > @@ -242,29 +70,6 @@ void orion5x_setup_wins(void) > ORION5X_PCI_MEM_SIZE); > } > > -int orion5x_tclk; > - > -static int __init orion5x_find_tclk(void) > -{ > - u32 dev, rev; > - > - orion5x_pcie_id(&dev, &rev); > - if (dev == MV88F6183_DEV_ID && > - (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0) > - return 133333333; > - > - return 166666667; > -} > - > -void __init orion5x_timer_init(void) > -{ > - orion5x_tclk = orion5x_find_tclk(); > - > - orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, > - IRQ_ORION5X_BRIDGE, orion5x_tclk); > -} > - > - > /***************************************************************************** > * General > ****************************************************************************/ > @@ -310,45 +115,6 @@ void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) > } > } > > -void __init orion5x_init(void) > -{ > - char *dev_name; > - u32 dev, rev; > - > - orion5x_id(&dev, &rev, &dev_name); > - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); > - > - /* > - * Setup Orion address map > - */ > - orion5x_setup_wins(); > - > - /* Setup root of clk tree */ > - clk_init(); > - > - /* > - * Don't issue "Wait for Interrupt" instruction if we are > - * running on D0 5281 silicon. > - */ > - if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { > - printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); > - cpu_idle_poll_ctrl(true); > - } > - > - /* > - * The 5082/5181l/5182/6082/6082l/6183 have crypto > - * while 5180n/5181/5281 don't have crypto. > - */ > - if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) || > - dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID) > - orion5x_crypto_init(); > - > - /* > - * Register watchdog driver > - */ > - orion5x_wdt_init(); > -} > - > void orion5x_restart(enum reboot_mode mode, const char *cmd) > { > /* > diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h > index 8df70e23aa82..4dc6c59bde99 100644 > --- a/arch/arm/mach-orion5x/common.h > +++ b/arch/arm/mach-orion5x/common.h > @@ -4,9 +4,6 @@ > > #include <linux/reboot.h> > > -struct mv643xx_eth_platform_data; > -struct mv_sata_platform_data; > - > #define ORION_MBUS_PCIE_MEM_TARGET 0x04 > #define ORION_MBUS_PCIE_MEM_ATTR 0x59 > #define ORION_MBUS_PCIE_IO_TARGET 0x04 > @@ -32,21 +29,9 @@ void orion5x_init_early(void); > void orion5x_init_irq(void); > void orion5x_init(void); > void orion5x_id(u32 *dev, u32 *rev, char **dev_name); > -void clk_init(void); > -extern int orion5x_tclk; > -extern void orion5x_timer_init(void); > > void orion5x_setup_wins(void); > > -void orion5x_ehci0_init(void); > -void orion5x_ehci1_init(void); > -void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); > -void orion5x_i2c_init(void); > -void orion5x_sata_init(struct mv_sata_platform_data *sata_data); > -void orion5x_spi_init(void); > -void orion5x_uart0_init(void); > -void orion5x_uart1_init(void); > -void orion5x_xor_init(void); > void orion5x_restart(enum reboot_mode, const char *); > > /* > diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c > deleted file mode 100644 > index 7b81b08b0dda..000000000000 > --- a/arch/arm/mach-orion5x/dns323-setup.c > +++ /dev/null > @@ -1,757 +0,0 @@ > -/* > - * arch/arm/mach-orion5x/dns323-setup.c > - * > - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> > - * > - * Support for HW Rev C1: > - * > - * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU Lesser General Public License as > - * published by the Free Software Foundation; either version 2 of the > - * License, or (at your option) any later version. > - * > - */ > -#include <linux/gpio/legacy.h> > -#include <linux/gpio/machine.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/delay.h> > -#include <linux/platform_device.h> > -#include <linux/pci.h> > -#include <linux/irq.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/leds.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <linux/i2c.h> > -#include <linux/ata_platform.h> > -#include <linux/phy.h> > -#include <linux/marvell_phy.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/pci.h> > -#include <asm/system_info.h> > -#include <plat/orion-gpio.h> > -#include "orion5x.h" > -#include "common.h" > -#include "mpp.h" > - > -/* Rev A1 and B1 */ > -#define DNS323_GPIO_LED_RIGHT_AMBER 1 > -#define DNS323_GPIO_LED_LEFT_AMBER 2 > -#define DNS323_GPIO_SYSTEM_UP 3 > -#define DNS323_GPIO_LED_POWER1 4 > -#define DNS323_GPIO_LED_POWER2 5 > -#define DNS323_GPIO_OVERTEMP 6 > -#define DNS323_GPIO_RTC 7 > -#define DNS323_GPIO_POWER_OFF 8 > -#define DNS323_GPIO_KEY_POWER 9 > -#define DNS323_GPIO_KEY_RESET 10 > - > -/* Rev C1 */ > -#define DNS323C_GPIO_KEY_POWER 1 > -#define DNS323C_GPIO_POWER_OFF 2 > -#define DNS323C_GPIO_LED_RIGHT_AMBER 8 > -#define DNS323C_GPIO_LED_LEFT_AMBER 9 > -#define DNS323C_GPIO_LED_POWER 17 > -#define DNS323C_GPIO_FAN_BIT1 18 > -#define DNS323C_GPIO_FAN_BIT0 19 > - > -/* Exposed to userspace, do not change */ > -enum { > - DNS323_REV_A1, /* 0 */ > - DNS323_REV_B1, /* 1 */ > - DNS323_REV_C1, /* 2 */ > -}; > - > - > -/**************************************************************************** > - * PCI setup > - */ > - > -static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) > -{ > - int irq; > - > - /* > - * Check for devices with hard-wired IRQs. > - */ > - irq = orion5x_pci_map_irq(dev, slot, pin); > - if (irq != -1) > - return irq; > - > - return -1; > -} > - > -static struct hw_pci dns323_pci __initdata = { > - .nr_controllers = 2, > - .setup = orion5x_pci_sys_setup, > - .scan = orion5x_pci_sys_scan_bus, > - .map_irq = dns323_pci_map_irq, > -}; > - > -static int __init dns323_pci_init(void) > -{ > - /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI > - * gets in the way of initialising the SATA controller. > - */ > - if (machine_is_dns323() && system_rev == DNS323_REV_A1) > - pci_common_init(&dns323_pci); > - > - return 0; > -} > - > -subsys_initcall(dns323_pci_init); > - > -/**************************************************************************** > - * 8MiB NOR flash (Spansion S29GL064M90TFIR4) > - * > - * Layout as used by D-Link: > - * 0x00000000-0x00010000 : "MTD1" > - * 0x00010000-0x00020000 : "MTD2" > - * 0x00020000-0x001a0000 : "Linux Kernel" > - * 0x001a0000-0x007d0000 : "File System" > - * 0x007d0000-0x00800000 : "u-boot" > - */ > - > -#define DNS323_NOR_BOOT_BASE 0xf4000000 > -#define DNS323_NOR_BOOT_SIZE SZ_8M > - > -static struct mtd_partition dns323_partitions[] = { > - { > - .name = "MTD1", > - .size = 0x00010000, > - .offset = 0, > - }, { > - .name = "MTD2", > - .size = 0x00010000, > - .offset = 0x00010000, > - }, { > - .name = "Linux Kernel", > - .size = 0x00180000, > - .offset = 0x00020000, > - }, { > - .name = "File System", > - .size = 0x00630000, > - .offset = 0x001A0000, > - }, { > - .name = "u-boot", > - .size = 0x00030000, > - .offset = 0x007d0000, > - }, > -}; > - > -static struct physmap_flash_data dns323_nor_flash_data = { > - .width = 1, > - .parts = dns323_partitions, > - .nr_parts = ARRAY_SIZE(dns323_partitions) > -}; > - > -static struct resource dns323_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = DNS323_NOR_BOOT_BASE, > - .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device dns323_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &dns323_nor_flash_data, > - }, > - .resource = &dns323_nor_flash_resource, > - .num_resources = 1, > -}; > - > -/**************************************************************************** > - * Ethernet > - */ > - > -static struct mv643xx_eth_platform_data dns323_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > -/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these > - * functions be kept somewhere? > - */ > -static int __init dns323_parse_hex_nibble(char n) > -{ > - if (n >= '0' && n <= '9') > - return n - '0'; > - > - if (n >= 'A' && n <= 'F') > - return n - 'A' + 10; > - > - if (n >= 'a' && n <= 'f') > - return n - 'a' + 10; > - > - return -1; > -} > - > -static int __init dns323_parse_hex_byte(const char *b) > -{ > - int hi; > - int lo; > - > - hi = dns323_parse_hex_nibble(b[0]); > - lo = dns323_parse_hex_nibble(b[1]); > - > - if (hi < 0 || lo < 0) > - return -1; > - > - return (hi << 4) | lo; > -} > - > -static int __init dns323_read_mac_addr(void) > -{ > - u_int8_t addr[6]; > - int i; > - char *mac_page; > - > - /* MAC address is stored as a regular ol' string in /dev/mtdblock4 > - * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). > - */ > - mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); > - if (!mac_page) > - return -ENOMEM; > - > - /* Sanity check the string we're looking at */ > - for (i = 0; i < 5; i++) { > - if (*(mac_page + (i * 3) + 2) != ':') { > - goto error_fail; > - } > - } > - > - for (i = 0; i < 6; i++) { > - int byte; > - > - byte = dns323_parse_hex_byte(mac_page + (i * 3)); > - if (byte < 0) { > - goto error_fail; > - } > - > - addr[i] = byte; > - } > - > - iounmap(mac_page); > - printk("DNS-323: Found ethernet MAC address: %pM\n", addr); > - > - memcpy(dns323_eth_data.mac_addr, addr, 6); > - > - return 0; > - > -error_fail: > - iounmap(mac_page); > - return -EINVAL; > -} > - > -/**************************************************************************** > - * GPIO LEDs (simple - doesn't use hardware blinking support) > - */ > - > -static struct gpio_led dns323ab_leds[] = { > - { > - .name = "power:blue", > - .default_trigger = "default-on", > - }, { > - .name = "right:amber", > - }, { > - .name = "left:amber", > - }, > -}; > - > -static struct gpiod_lookup_table dns323a1_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, > - 0, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, > - 1, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, > - 2, GPIO_ACTIVE_LOW), > - { }, > - }, > -}; > - > -/* B1 is the same but power LED is active high */ > -static struct gpiod_lookup_table dns323b1_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL, > - 0, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL, > - 1, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL, > - 2, GPIO_ACTIVE_LOW), > - { }, > - }, > -}; > - > -static struct gpio_led dns323c_leds[] = { > - { > - .name = "power:blue", > - .default_trigger = "timer", > - }, { > - .name = "right:amber", > - }, { > - .name = "left:amber", > - }, > -}; > - > -static struct gpiod_lookup_table dns323c_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL, > - 0, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL, > - 1, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL, > - 2, GPIO_ACTIVE_LOW), > - { }, > - }, > -}; > - > -static struct gpio_led_platform_data dns323ab_led_data = { > - .num_leds = ARRAY_SIZE(dns323ab_leds), > - .leds = dns323ab_leds, > - .gpio_blink_set = orion_gpio_led_blink_set, > -}; > - > -static struct gpio_led_platform_data dns323c_led_data = { > - .num_leds = ARRAY_SIZE(dns323c_leds), > - .leds = dns323c_leds, > - .gpio_blink_set = orion_gpio_led_blink_set, > -}; > - > -static struct platform_device dns323_gpio_leds = { > - .name = "leds-gpio", > - .id = -1, > - .dev = { > - .platform_data = &dns323ab_led_data, > - }, > -}; > - > -/**************************************************************************** > - * GPIO Attached Keys > - */ > - > -static struct gpio_keys_button dns323ab_buttons[] = { > - { > - .code = KEY_RESTART, > - .gpio = DNS323_GPIO_KEY_RESET, > - .desc = "Reset Button", > - .active_low = 1, > - }, { > - .code = KEY_POWER, > - .gpio = DNS323_GPIO_KEY_POWER, > - .desc = "Power Button", > - .active_low = 1, > - }, > -}; > - > -static struct gpio_keys_platform_data dns323ab_button_data = { > - .buttons = dns323ab_buttons, > - .nbuttons = ARRAY_SIZE(dns323ab_buttons), > -}; > - > -static struct gpio_keys_button dns323c_buttons[] = { > - { > - .code = KEY_POWER, > - .gpio = DNS323C_GPIO_KEY_POWER, > - .desc = "Power Button", > - .active_low = 1, > - }, > -}; > - > -static struct gpio_keys_platform_data dns323c_button_data = { > - .buttons = dns323c_buttons, > - .nbuttons = ARRAY_SIZE(dns323c_buttons), > -}; > - > -static struct platform_device dns323_button_device = { > - .name = "gpio-keys", > - .id = -1, > - .num_resources = 0, > - .dev = { > - .platform_data = &dns323ab_button_data, > - }, > -}; > - > -/***************************************************************************** > - * SATA > - */ > -static struct mv_sata_platform_data dns323_sata_data = { > - .n_ports = 2, > -}; > - > -/**************************************************************************** > - * General Setup > - */ > -static unsigned int dns323a_mpp_modes[] __initdata = { > - MPP0_PCIE_RST_OUTn, > - MPP1_GPIO, /* right amber LED (sata ch0) */ > - MPP2_GPIO, /* left amber LED (sata ch1) */ > - MPP3_UNUSED, > - MPP4_GPIO, /* power button LED */ > - MPP5_GPIO, /* power button LED */ > - MPP6_GPIO, /* GMT G751-2f overtemp */ > - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ > - MPP8_GPIO, /* triggers power off */ > - MPP9_GPIO, /* power button switch */ > - MPP10_GPIO, /* reset button switch */ > - MPP11_UNUSED, > - MPP12_UNUSED, > - MPP13_UNUSED, > - MPP14_UNUSED, > - MPP15_UNUSED, > - MPP16_UNUSED, > - MPP17_UNUSED, > - MPP18_UNUSED, > - MPP19_UNUSED, > - 0, > -}; > - > -static unsigned int dns323b_mpp_modes[] __initdata = { > - MPP0_UNUSED, > - MPP1_GPIO, /* right amber LED (sata ch0) */ > - MPP2_GPIO, /* left amber LED (sata ch1) */ > - MPP3_GPIO, /* system up flag */ > - MPP4_GPIO, /* power button LED */ > - MPP5_GPIO, /* power button LED */ > - MPP6_GPIO, /* GMT G751-2f overtemp */ > - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ > - MPP8_GPIO, /* triggers power off */ > - MPP9_GPIO, /* power button switch */ > - MPP10_GPIO, /* reset button switch */ > - MPP11_UNUSED, > - MPP12_SATA_LED, > - MPP13_SATA_LED, > - MPP14_SATA_LED, > - MPP15_SATA_LED, > - MPP16_UNUSED, > - MPP17_UNUSED, > - MPP18_UNUSED, > - MPP19_UNUSED, > - 0, > -}; > - > -static unsigned int dns323c_mpp_modes[] __initdata = { > - MPP0_GPIO, /* ? input */ > - MPP1_GPIO, /* input power switch (0 = pressed) */ > - MPP2_GPIO, /* output power off */ > - MPP3_UNUSED, /* ? output */ > - MPP4_UNUSED, /* ? output */ > - MPP5_UNUSED, /* ? output */ > - MPP6_UNUSED, /* ? output */ > - MPP7_UNUSED, /* ? output */ > - MPP8_GPIO, /* i/o right amber LED */ > - MPP9_GPIO, /* i/o left amber LED */ > - MPP10_GPIO, /* input */ > - MPP11_UNUSED, > - MPP12_SATA_LED, > - MPP13_SATA_LED, > - MPP14_SATA_LED, > - MPP15_SATA_LED, > - MPP16_UNUSED, > - MPP17_GPIO, /* power button LED */ > - MPP18_GPIO, /* fan speed bit 0 */ > - MPP19_GPIO, /* fan speed bit 1 */ > - 0, > -}; > - > -/* Rev C1 Fan speed notes: > - * > - * The fan is controlled by 2 GPIOs on this board. The settings > - * of the bits is as follow: > - * > - * GPIO 18 GPIO 19 Fan > - * > - * 0 0 stopped > - * 0 1 low speed > - * 1 0 high speed > - * 1 1 don't do that (*) > - * > - * (*) I think the two bits control two feed-in resistors into a fixed > - * PWN circuit, setting both bits will basically go a 'bit' faster > - * than high speed, but d-link doesn't do it and you may get out of > - * HW spec so don't do it. > - */ > - > -/* > - * On the DNS-323 A1 and B1 the following devices are attached via I2C: > - * > - * i2c addr | chip | description > - * 0x3e | GMT G760Af | fan speed PWM controller > - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) > - * 0x68 | ST M41T80 | RTC w/ alarm > - */ > -static struct i2c_board_info __initdata dns323ab_i2c_devices[] = { > - { > - I2C_BOARD_INFO("g760a", 0x3e), > - }, { > - I2C_BOARD_INFO("lm75", 0x48), > - }, { > - I2C_BOARD_INFO("m41t80", 0x68), > - }, > -}; > - > -/* > - * On the DNS-323 C1 the following devices are attached via I2C: > - * > - * i2c addr | chip | description > - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) > - * 0x68 | ST M41T80 | RTC w/ alarm > - */ > -static struct i2c_board_info __initdata dns323c_i2c_devices[] = { > - { > - I2C_BOARD_INFO("lm75", 0x48), > - }, { > - I2C_BOARD_INFO("m41t80", 0x68), > - }, > -}; > - > -/* DNS-323 rev. A specific power off method */ > -static void dns323a_power_off(void) > -{ > - pr_info("DNS-323: Triggering power-off...\n"); > - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); > -} > - > -/* DNS-323 rev B specific power off method */ > -static void dns323b_power_off(void) > -{ > - pr_info("DNS-323: Triggering power-off...\n"); > - /* Pin has to be changed to 1 and back to 0 to do actual power off. */ > - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); > - mdelay(100); > - gpio_set_value(DNS323_GPIO_POWER_OFF, 0); > -} > - > -/* DNS-323 rev. C specific power off method */ > -static void dns323c_power_off(void) > -{ > - pr_info("DNS-323: Triggering power-off...\n"); > - gpio_set_value(DNS323C_GPIO_POWER_OFF, 1); > -} > - > -static int dns323c_phy_fixup(struct phy_device *phy) > -{ > - phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS; > - > - return 0; > -} > - > -static int __init dns323_identify_rev(void) > -{ > - u32 dev, rev, i, reg; > - > - pr_debug("DNS-323: Identifying board ... \n"); > - > - /* Rev A1 has a 5181 */ > - orion5x_pcie_id(&dev, &rev); > - if (dev == MV88F5181_DEV_ID) { > - pr_debug("DNS-323: 5181 found, board is A1\n"); > - return DNS323_REV_A1; > - } > - pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n"); > - > - /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is > - * a bit gross but we want to do that without links into the eth > - * driver so let's poke at it directly. We default to rev B1 in > - * case the accesses fail > - */ > - > -#define ETH_SMI_REG (ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004) > -#define SMI_BUSY 0x10000000 > -#define SMI_READ_VALID 0x08000000 > -#define SMI_OPCODE_READ 0x04000000 > -#define SMI_OPCODE_WRITE 0x00000000 > - > - for (i = 0; i < 1000; i++) { > - reg = readl(ETH_SMI_REG); > - if (!(reg & SMI_BUSY)) > - break; > - } > - if (i >= 1000) { > - pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n"); > - return DNS323_REV_B1; > - } > - writel((3 << 21) /* phy ID reg */ | > - (8 << 16) /* phy addr */ | > - SMI_OPCODE_READ, ETH_SMI_REG); > - for (i = 0; i < 1000; i++) { > - reg = readl(ETH_SMI_REG); > - if (reg & SMI_READ_VALID) > - break; > - } > - if (i >= 1000) { > - pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n"); > - return DNS323_REV_B1; > - } > - pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff); > - > - /* Note: the Marvell tools mask the ID with 0x3f0 before comparison > - * but I don't see that making a difference here, at least with > - * any known Marvell PHY ID > - */ > - switch(reg & 0xfff0) { > - case 0x0cc0: /* MV88E1111 */ > - return DNS323_REV_B1; > - case 0x0e10: /* MV88E1118 */ > - return DNS323_REV_C1; > - default: > - pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", > - reg & 0xffff); > - } > - return DNS323_REV_B1; > -} > - > -static void __init dns323_init(void) > -{ > - /* Setup basic Orion functions. Need to be called early. */ > - orion5x_init(); > - > - /* Identify revision */ > - system_rev = dns323_identify_rev(); > - pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev); > - > - /* Just to be tricky, the 5182 has a completely different > - * set of MPP modes to the 5181. > - */ > - switch(system_rev) { > - case DNS323_REV_A1: > - orion5x_mpp_conf(dns323a_mpp_modes); > - writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ > - break; > - case DNS323_REV_B1: > - orion5x_mpp_conf(dns323b_mpp_modes); > - break; > - case DNS323_REV_C1: > - orion5x_mpp_conf(dns323c_mpp_modes); > - break; > - } > - > - /* setup flash mapping > - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 > - */ > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - DNS323_NOR_BOOT_BASE, > - DNS323_NOR_BOOT_SIZE); > - platform_device_register(&dns323_nor_flash); > - > - /* Sort out LEDs, Buttons and i2c devices */ > - switch(system_rev) { > - case DNS323_REV_A1: > - /* The 5181 power LED is active low and requires > - * DNS323_GPIO_LED_POWER1 to also be low. > - */ > - gpiod_add_lookup_table(&dns323a1_leds_gpio_table); > - gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); > - gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); > - i2c_register_board_info(0, dns323ab_i2c_devices, > - ARRAY_SIZE(dns323ab_i2c_devices)); > - > - break; > - case DNS323_REV_B1: > - gpiod_add_lookup_table(&dns323b1_leds_gpio_table); > - i2c_register_board_info(0, dns323ab_i2c_devices, > - ARRAY_SIZE(dns323ab_i2c_devices)); > - break; > - case DNS323_REV_C1: > - /* Hookup LEDs & Buttons */ > - gpiod_add_lookup_table(&dns323c_leds_gpio_table); > - dns323_gpio_leds.dev.platform_data = &dns323c_led_data; > - dns323_button_device.dev.platform_data = &dns323c_button_data; > - > - /* Hookup i2c devices and fan driver */ > - i2c_register_board_info(0, dns323c_i2c_devices, > - ARRAY_SIZE(dns323c_i2c_devices)); > - platform_device_register_simple("dns323c-fan", 0, NULL, 0); > - > - /* Register fixup for the PHY LEDs */ > - if (!IS_BUILTIN(CONFIG_PHYLIB)) > - break; > - phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, > - MARVELL_PHY_ID_MASK, > - dns323c_phy_fixup); > - } > - > - platform_device_register(&dns323_gpio_leds); > - platform_device_register(&dns323_button_device); > - > - /* > - * Configure peripherals. > - */ > - if (dns323_read_mac_addr() < 0) > - printk("DNS-323: Failed to read MAC address\n"); > - orion5x_ehci0_init(); > - orion5x_eth_init(&dns323_eth_data); > - orion5x_i2c_init(); > - orion5x_uart0_init(); > - > - /* Remaining GPIOs */ > - switch(system_rev) { > - case DNS323_REV_A1: > - /* Poweroff GPIO */ > - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || > - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) > - pr_err("DNS-323: failed to setup power-off GPIO\n"); > - register_platform_power_off(dns323a_power_off); > - break; > - case DNS323_REV_B1: > - /* 5182 built-in SATA init */ > - orion5x_sata_init(&dns323_sata_data); > - > - /* The DNS323 rev B1 has flag to indicate the system is up. > - * Without this flag set, power LED will flash and cannot be > - * controlled via leds-gpio. > - */ > - if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0) > - gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1); > - > - /* Poweroff GPIO */ > - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || > - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) > - pr_err("DNS-323: failed to setup power-off GPIO\n"); > - register_platform_power_off(dns323b_power_off); > - break; > - case DNS323_REV_C1: > - /* 5182 built-in SATA init */ > - orion5x_sata_init(&dns323_sata_data); > - > - /* Poweroff GPIO */ > - if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || > - gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) > - pr_err("DNS-323: failed to setup power-off GPIO\n"); > - register_platform_power_off(dns323c_power_off); > - > - /* Now, -this- should theoretically be done by the sata_mv driver > - * once I figure out what's going on there. Maybe the behaviour > - * of the LEDs should be somewhat passed via the platform_data. > - * for now, just whack the register and make the LEDs happy > - * > - * Note: AFAIK, rev B1 needs the same treatment but I'll let > - * somebody else test it. > - */ > - writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); > - break; > - } > -} > - > -/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ > -MACHINE_START(DNS323, "D-Link DNS-323") > - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = dns323_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c > deleted file mode 100644 > index e61b9ab06943..000000000000 > --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c > +++ /dev/null > @@ -1,407 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-orion5x/kurobox_pro-setup.c > - * > - * Maintainer: Ronen Shitrit <rshitrit@marvell.com> > - */ > -#include <linux/gpio/consumer.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/pci.h> > -#include <linux/irq.h> > -#include <linux/delay.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mtd/rawnand.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/i2c.h> > -#include <linux/serial_reg.h> > -#include <linux/ata_platform.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/pci.h> > -#include <linux/platform_data/mtd-orion_nand.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > - > -/***************************************************************************** > - * KUROBOX-PRO Info > - ****************************************************************************/ > - > -/* > - * 256K NOR flash Device bus boot chip select > - */ > - > -#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 > -#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K > - > -/* > - * 256M NAND flash on Device bus chip select 1 > - */ > - > -#define KUROBOX_PRO_NAND_BASE 0xfc000000 > -#define KUROBOX_PRO_NAND_SIZE SZ_2M > - > -/***************************************************************************** > - * 256MB NAND Flash on Device bus CS0 > - ****************************************************************************/ > - > -static struct mtd_partition kurobox_pro_nand_parts[] = { > - { > - .name = "uImage", > - .offset = 0, > - .size = SZ_4M, > - }, { > - .name = "rootfs", > - .offset = SZ_4M, > - .size = SZ_64M, > - }, { > - .name = "extra", > - .offset = SZ_4M + SZ_64M, > - .size = SZ_256M - (SZ_4M + SZ_64M), > - }, > -}; > - > -static struct resource kurobox_pro_nand_resource = { > - .flags = IORESOURCE_MEM, > - .start = KUROBOX_PRO_NAND_BASE, > - .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, > -}; > - > -static struct orion_nand_data kurobox_pro_nand_data = { > - .parts = kurobox_pro_nand_parts, > - .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), > - .cle = 0, > - .ale = 1, > - .width = 8, > -}; > - > -static struct platform_device kurobox_pro_nand_flash = { > - .name = "orion_nand", > - .id = -1, > - .dev = { > - .platform_data = &kurobox_pro_nand_data, > - }, > - .resource = &kurobox_pro_nand_resource, > - .num_resources = 1, > -}; > - > -/***************************************************************************** > - * 256KB NOR Flash on BOOT Device > - ****************************************************************************/ > - > -static struct physmap_flash_data kurobox_pro_nor_flash_data = { > - .width = 1, > -}; > - > -static struct resource kurobox_pro_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = KUROBOX_PRO_NOR_BOOT_BASE, > - .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device kurobox_pro_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &kurobox_pro_nor_flash_data, > - }, > - .num_resources = 1, > - .resource = &kurobox_pro_nor_flash_resource, > -}; > - > -/***************************************************************************** > - * PCI > - ****************************************************************************/ > - > -static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot, > - u8 pin) > -{ > - int irq; > - > - /* > - * Check for devices with hard-wired IRQs. > - */ > - irq = orion5x_pci_map_irq(dev, slot, pin); > - if (irq != -1) > - return irq; > - > - /* > - * PCI isn't used on the Kuro > - */ > - return -1; > -} > - > -static struct hw_pci kurobox_pro_pci __initdata = { > - .nr_controllers = 2, > - .setup = orion5x_pci_sys_setup, > - .scan = orion5x_pci_sys_scan_bus, > - .map_irq = kurobox_pro_pci_map_irq, > -}; > - > -static int __init kurobox_pro_pci_init(void) > -{ > - if (machine_is_kurobox_pro()) { > - orion5x_pci_disable(); > - pci_common_init(&kurobox_pro_pci); > - } > - > - return 0; > -} > - > -subsys_initcall(kurobox_pro_pci_init); > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > - > -static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > -/***************************************************************************** > - * RTC 5C372a on I2C bus > - ****************************************************************************/ > -static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { > - I2C_BOARD_INFO("rs5c372a", 0x32), > -}; > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -static struct mv_sata_platform_data kurobox_pro_sata_data = { > - .n_ports = 2, > -}; > - > -/***************************************************************************** > - * Kurobox Pro specific power off method via UART1-attached microcontroller > - ****************************************************************************/ > - > -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) > - > -static int kurobox_pro_miconread(unsigned char *buf, int count) > -{ > - int i; > - int timeout; > - > - for (i = 0; i < count; i++) { > - timeout = 10; > - > - while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) { > - if (--timeout == 0) > - break; > - udelay(1000); > - } > - > - if (timeout == 0) > - break; > - buf[i] = readl(UART1_REG(RX)); > - } > - > - /* return read bytes */ > - return i; > -} > - > -static int kurobox_pro_miconwrite(const unsigned char *buf, int count) > -{ > - int i = 0; > - > - while (count--) { > - while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE)) > - barrier(); > - writel(buf[i++], UART1_REG(TX)); > - } > - > - return 0; > -} > - > -static int kurobox_pro_miconsend(const unsigned char *data, int count) > -{ > - int i; > - unsigned char checksum = 0; > - unsigned char recv_buf[40]; > - unsigned char send_buf[40]; > - unsigned char correct_ack[3]; > - int retry = 2; > - > - /* Generate checksum */ > - for (i = 0; i < count; i++) > - checksum -= data[i]; > - > - do { > - /* Send data */ > - kurobox_pro_miconwrite(data, count); > - > - /* send checksum */ > - kurobox_pro_miconwrite(&checksum, 1); > - > - if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) { > - printk(KERN_ERR ">%s: receive failed.\n", __func__); > - > - /* send preamble to clear the receive buffer */ > - memset(&send_buf, 0xff, sizeof(send_buf)); > - kurobox_pro_miconwrite(send_buf, sizeof(send_buf)); > - > - /* make dummy reads */ > - mdelay(100); > - kurobox_pro_miconread(recv_buf, sizeof(recv_buf)); > - } else { > - /* Generate expected ack */ > - correct_ack[0] = 0x01; > - correct_ack[1] = data[1]; > - correct_ack[2] = 0x00; > - > - /* checksum Check */ > - if ((recv_buf[0] + recv_buf[1] + recv_buf[2] + > - recv_buf[3]) & 0xFF) { > - printk(KERN_ERR ">%s: Checksum Error : " > - "Received data[%02x, %02x, %02x, %02x]" > - "\n", __func__, recv_buf[0], > - recv_buf[1], recv_buf[2], recv_buf[3]); > - } else { > - /* Check Received Data */ > - if (correct_ack[0] == recv_buf[0] && > - correct_ack[1] == recv_buf[1] && > - correct_ack[2] == recv_buf[2]) { > - /* Interval for next command */ > - mdelay(10); > - > - /* Receive ACK */ > - return 0; > - } > - } > - /* Received NAK or illegal Data */ > - printk(KERN_ERR ">%s: Error : NAK or Illegal Data " > - "Received\n", __func__); > - } > - } while (retry--); > - > - /* Interval for next command */ > - mdelay(10); > - > - return -1; > -} > - > -static void kurobox_pro_power_off(void) > -{ > - const unsigned char watchdogkill[] = {0x01, 0x35, 0x00}; > - const unsigned char shutdownwait[] = {0x00, 0x0c}; > - const unsigned char poweroff[] = {0x00, 0x06}; > - /* 38400 baud divisor */ > - const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400)); > - > - pr_info("%s: triggering power-off...\n", __func__); > - > - /* hijack uart1 and reset into sane state (38400,8n1,even parity) */ > - writel(0x83, UART1_REG(LCR)); > - writel(divisor & 0xff, UART1_REG(DLL)); > - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); > - writel(0x1b, UART1_REG(LCR)); > - writel(0x00, UART1_REG(IER)); > - writel(0x07, UART1_REG(FCR)); > - writel(0x00, UART1_REG(MCR)); > - > - /* Send the commands to shutdown the Kurobox Pro */ > - kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ; > - kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ; > - kurobox_pro_miconsend(poweroff, sizeof(poweroff)); > -} > - > -/***************************************************************************** > - * General Setup > - ****************************************************************************/ > -static unsigned int kurobox_pro_mpp_modes[] __initdata = { > - MPP0_UNUSED, > - MPP1_UNUSED, > - MPP2_GPIO, /* GPIO Micon */ > - MPP3_GPIO, /* GPIO Rtc */ > - MPP4_UNUSED, > - MPP5_UNUSED, > - MPP6_NAND, /* NAND Flash REn */ > - MPP7_NAND, /* NAND Flash WEn */ > - MPP8_UNUSED, > - MPP9_UNUSED, > - MPP10_UNUSED, > - MPP11_UNUSED, > - MPP12_SATA_LED, /* SATA 0 presence */ > - MPP13_SATA_LED, /* SATA 1 presence */ > - MPP14_SATA_LED, /* SATA 0 active */ > - MPP15_SATA_LED, /* SATA 1 active */ > - MPP16_UART, /* UART1 RXD */ > - MPP17_UART, /* UART1 TXD */ > - MPP18_UART, /* UART1 CTSn */ > - MPP19_UART, /* UART1 RTSn */ > - 0, > -}; > - > -static void __init kurobox_pro_init(void) > -{ > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(kurobox_pro_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - orion5x_ehci0_init(); > - orion5x_ehci1_init(); > - orion5x_eth_init(&kurobox_pro_eth_data); > - orion5x_i2c_init(); > - orion5x_sata_init(&kurobox_pro_sata_data); > - orion5x_uart0_init(); > - orion5x_uart1_init(); > - orion5x_xor_init(); > - > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - KUROBOX_PRO_NOR_BOOT_BASE, > - KUROBOX_PRO_NOR_BOOT_SIZE); > - platform_device_register(&kurobox_pro_nor_flash); > - > - if (machine_is_kurobox_pro()) { > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), > - ORION_MBUS_DEVBUS_ATTR(0), > - KUROBOX_PRO_NAND_BASE, > - KUROBOX_PRO_NAND_SIZE); > - platform_device_register(&kurobox_pro_nand_flash); > - } > - > - i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); > - > - /* register Kurobox Pro specific power-off method */ > - register_platform_power_off(kurobox_pro_power_off); > -} > - > -#ifdef CONFIG_MACH_KUROBOX_PRO > -MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") > - /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = kurobox_pro_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > -#endif > - > -#ifdef CONFIG_MACH_LINKSTATION_PRO > -MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") > - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = kurobox_pro_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > -#endif > diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c > deleted file mode 100644 > index b15fe5b7a0f9..000000000000 > --- a/arch/arm/mach-orion5x/mv2120-setup.c > +++ /dev/null > @@ -1,256 +0,0 @@ > -/* > - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> > - * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU Lesser General Public License as > - * published by the Free Software Foundation; either version 2 of the > - * License, or (at your option) any later version. > - */ > -#include <linux/gpio/legacy.h> > -#include <linux/gpio/machine.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/irq.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/leds.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <linux/i2c.h> > -#include <linux/ata_platform.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > - > -#define MV2120_NOR_BOOT_BASE 0xf4000000 > -#define MV2120_NOR_BOOT_SIZE SZ_512K > - > -#define MV2120_GPIO_RTC_IRQ 3 > -#define MV2120_GPIO_KEY_RESET 17 > -#define MV2120_GPIO_KEY_POWER 18 > -#define MV2120_GPIO_POWER_OFF 19 > - > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > -static struct mv643xx_eth_platform_data mv2120_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > -static struct mv_sata_platform_data mv2120_sata_data = { > - .n_ports = 2, > -}; > - > -static struct mtd_partition mv2120_partitions[] = { > - { > - .name = "firmware", > - .size = 0x00080000, > - .offset = 0, > - }, > -}; > - > -static struct physmap_flash_data mv2120_nor_flash_data = { > - .width = 1, > - .parts = mv2120_partitions, > - .nr_parts = ARRAY_SIZE(mv2120_partitions) > -}; > - > -static struct resource mv2120_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = MV2120_NOR_BOOT_BASE, > - .end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device mv2120_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &mv2120_nor_flash_data, > - }, > - .resource = &mv2120_nor_flash_resource, > - .num_resources = 1, > -}; > - > -static struct gpio_keys_button mv2120_buttons[] = { > - { > - .code = KEY_RESTART, > - .gpio = MV2120_GPIO_KEY_RESET, > - .desc = "reset", > - .active_low = 1, > - }, { > - .code = KEY_POWER, > - .gpio = MV2120_GPIO_KEY_POWER, > - .desc = "power", > - .active_low = 1, > - }, > -}; > - > -static struct gpio_keys_platform_data mv2120_button_data = { > - .buttons = mv2120_buttons, > - .nbuttons = ARRAY_SIZE(mv2120_buttons), > -}; > - > -static struct platform_device mv2120_button_device = { > - .name = "gpio-keys", > - .id = -1, > - .num_resources = 0, > - .dev = { > - .platform_data = &mv2120_button_data, > - }, > -}; > - > - > -/**************************************************************************** > - * General Setup > - ****************************************************************************/ > -static unsigned int mv2120_mpp_modes[] __initdata = { > - MPP0_GPIO, /* Sys status LED */ > - MPP1_GPIO, /* Sys error LED */ > - MPP2_GPIO, /* OverTemp interrupt */ > - MPP3_GPIO, /* RTC interrupt */ > - MPP4_GPIO, /* V_LED 5V */ > - MPP5_GPIO, /* V_LED 3.3V */ > - MPP6_UNUSED, > - MPP7_UNUSED, > - MPP8_GPIO, /* SATA 0 fail LED */ > - MPP9_GPIO, /* SATA 1 fail LED */ > - MPP10_UNUSED, > - MPP11_UNUSED, > - MPP12_SATA_LED, /* SATA 0 presence */ > - MPP13_SATA_LED, /* SATA 1 presence */ > - MPP14_SATA_LED, /* SATA 0 active */ > - MPP15_SATA_LED, /* SATA 1 active */ > - MPP16_UNUSED, > - MPP17_GPIO, /* Reset button */ > - MPP18_GPIO, /* Power button */ > - MPP19_GPIO, /* Power off */ > - 0, > -}; > - > -static struct i2c_board_info __initdata mv2120_i2c_rtc = { > - I2C_BOARD_INFO("pcf8563", 0x51), > - .irq = 0, > -}; > - > -static struct gpio_led mv2120_led_pins[] = { > - { > - .name = "mv2120:blue:health", > - }, > - { > - .name = "mv2120:red:health", > - }, > - { > - .name = "mv2120:led:bright", > - .default_trigger = "default-on", > - }, > - { > - .name = "mv2120:led:dimmed", > - }, > - { > - .name = "mv2120:red:sata0", > - }, > - { > - .name = "mv2120:red:sata1", > - }, > - > -}; > - > -static struct gpiod_lookup_table mv2120_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL, > - 0, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL, > - 1, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, > - 2, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, > - 3, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL, > - 4, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL, > - 5, GPIO_ACTIVE_LOW), > - { }, > - }, > -}; > - > -static struct gpio_led_platform_data mv2120_led_data = { > - .leds = mv2120_led_pins, > - .num_leds = ARRAY_SIZE(mv2120_led_pins), > -}; > - > -static struct platform_device mv2120_leds = { > - .name = "leds-gpio", > - .id = -1, > - .dev = { > - .platform_data = &mv2120_led_data, > - } > -}; > - > -static void mv2120_power_off(void) > -{ > - pr_info("%s: triggering power-off...\n", __func__); > - gpio_set_value(MV2120_GPIO_POWER_OFF, 0); > -} > - > -static void __init mv2120_init(void) > -{ > - /* Setup basic Orion functions. Need to be called early. */ > - orion5x_init(); > - > - orion5x_mpp_conf(mv2120_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - orion5x_ehci0_init(); > - orion5x_ehci1_init(); > - orion5x_eth_init(&mv2120_eth_data); > - orion5x_i2c_init(); > - orion5x_sata_init(&mv2120_sata_data); > - orion5x_uart0_init(); > - orion5x_xor_init(); > - > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - MV2120_NOR_BOOT_BASE, > - MV2120_NOR_BOOT_SIZE); > - platform_device_register(&mv2120_nor_flash); > - > - platform_device_register(&mv2120_button_device); > - > - if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) { > - if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0) > - mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ); > - else > - gpio_free(MV2120_GPIO_RTC_IRQ); > - } > - i2c_register_board_info(0, &mv2120_i2c_rtc, 1); > - gpiod_add_lookup_table(&mv2120_leds_gpio_table); > - platform_device_register(&mv2120_leds); > - > - /* register mv2120 specific power-off method */ > - if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || > - gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0) > - pr_err("mv2120: failed to setup power-off GPIO\n"); > - register_platform_power_off(mv2120_power_off); > -} > - > -/* Warning: HP uses a wrong mach-type (=526) in their bootloader */ > -MACHINE_START(MV2120, "HP Media Vault mv2120") > - /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = mv2120_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c > deleted file mode 100644 > index f04571e79805..000000000000 > --- a/arch/arm/mach-orion5x/net2big-setup.c > +++ /dev/null > @@ -1,444 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-orion5x/net2big-setup.c > - * > - * LaCie 2Big Network NAS setup > - * > - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> > - */ > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/leds.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <linux/i2c.h> > -#include <linux/ata_platform.h> > -#include <linux/gpio/legacy.h> > -#include <linux/gpio/machine.h> > -#include <linux/delay.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <plat/orion-gpio.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > - > -/***************************************************************************** > - * LaCie 2Big Network Info > - ****************************************************************************/ > - > -/* > - * 512KB NOR flash Device bus boot chip select > - */ > - > -#define NET2BIG_NOR_BOOT_BASE 0xfff80000 > -#define NET2BIG_NOR_BOOT_SIZE SZ_512K > - > -/***************************************************************************** > - * 512KB NOR Flash on Boot Device > - ****************************************************************************/ > - > -/* > - * TODO: Check write support on flash MX29LV400CBTC-70G > - */ > - > -static struct mtd_partition net2big_partitions[] = { > - { > - .name = "Full512kb", > - .size = MTDPART_SIZ_FULL, > - .offset = 0x00000000, > - .mask_flags = MTD_WRITEABLE, > - }, > -}; > - > -static struct physmap_flash_data net2big_nor_flash_data = { > - .width = 1, > - .parts = net2big_partitions, > - .nr_parts = ARRAY_SIZE(net2big_partitions), > -}; > - > -static struct resource net2big_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = NET2BIG_NOR_BOOT_BASE, > - .end = NET2BIG_NOR_BOOT_BASE > - + NET2BIG_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device net2big_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &net2big_nor_flash_data, > - }, > - .num_resources = 1, > - .resource = &net2big_nor_flash_resource, > -}; > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > - > -static struct mv643xx_eth_platform_data net2big_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > -/***************************************************************************** > - * I2C devices > - ****************************************************************************/ > - > -/* > - * i2c addr | chip | description > - * 0x32 | Ricoh 5C372b | RTC > - * 0x50 | HT24LC08 | eeprom (1kB) > - */ > -static struct i2c_board_info __initdata net2big_i2c_devices[] = { > - { > - I2C_BOARD_INFO("rs5c372b", 0x32), > - }, { > - I2C_BOARD_INFO("24c08", 0x50), > - }, > -}; > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > - > -static struct mv_sata_platform_data net2big_sata_data = { > - .n_ports = 2, > -}; > - > -#define NET2BIG_GPIO_SATA_POWER_REQ 19 > -#define NET2BIG_GPIO_SATA0_POWER 23 > -#define NET2BIG_GPIO_SATA1_POWER 25 > - > -static void __init net2big_sata_power_init(void) > -{ > - int err; > - > - /* Configure GPIOs over MPP max number. */ > - orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1); > - orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1); > - > - err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status"); > - if (err == 0) { > - err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER); > - if (err) > - gpio_free(NET2BIG_GPIO_SATA0_POWER); > - } > - if (err) { > - pr_err("net2big: failed to setup SATA0 power GPIO\n"); > - return; > - } > - > - err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status"); > - if (err == 0) { > - err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER); > - if (err) > - gpio_free(NET2BIG_GPIO_SATA1_POWER); > - } > - if (err) { > - pr_err("net2big: failed to setup SATA1 power GPIO\n"); > - goto err_free_1; > - } > - > - err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request"); > - if (err == 0) { > - err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0); > - if (err) > - gpio_free(NET2BIG_GPIO_SATA_POWER_REQ); > - } > - if (err) { > - pr_err("net2big: failed to setup SATA power request GPIO\n"); > - goto err_free_2; > - } > - > - if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) && > - gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) { > - return; > - } > - > - /* > - * SATA power up on both disk is done by pulling high the CPLD power > - * request line. The 300ms delay is related to the CPLD clock and is > - * needed to be sure that the CPLD has take into account the low line > - * status. > - */ > - msleep(300); > - gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1); > - pr_info("net2big: power up SATA hard disks\n"); > - > - return; > - > -err_free_2: > - gpio_free(NET2BIG_GPIO_SATA1_POWER); > -err_free_1: > - gpio_free(NET2BIG_GPIO_SATA0_POWER); > - > - return; > -} > - > -/***************************************************************************** > - * GPIO LEDs > - ****************************************************************************/ > - > -/* > - * The power front LEDs (blue and red) and SATA red LEDs are controlled via a > - * single GPIO line and are compatible with the leds-gpio driver. > - * > - * The SATA blue LEDs have some hardware blink capabilities which are detailed > - * in the following array: > - * > - * SATAx blue LED | SATAx activity | LED state > - * | | > - * 0 | 0 | blink (rate 300ms) > - * 1 | 0 | off > - * ? | 1 | on > - * > - * Notes: The blue and the red front LED's can't be on at the same time. > - * Blue LED have priority. > - */ > - > -#define NET2BIG_GPIO_PWR_RED_LED 6 > -#define NET2BIG_GPIO_PWR_BLUE_LED 16 > -#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7 > - > -#define NET2BIG_GPIO_SATA0_RED_LED 11 > -#define NET2BIG_GPIO_SATA1_RED_LED 10 > - > -#define NET2BIG_GPIO_SATA0_BLUE_LED 17 > -#define NET2BIG_GPIO_SATA1_BLUE_LED 13 > - > -static struct gpio_led net2big_leds[] = { > - { > - .name = "net2big:red:power", > - }, > - { > - .name = "net2big:blue:power", > - }, > - { > - .name = "net2big:red:sata0", > - }, > - { > - .name = "net2big:red:sata1", > - }, > -}; > - > -static struct gpiod_lookup_table net2big_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL, > - 0, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL, > - 1, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL, > - 2, GPIO_ACTIVE_HIGH), > - GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL, > - 3, GPIO_ACTIVE_HIGH), > - { }, > - }, > -}; > - > -static struct gpio_led_platform_data net2big_led_data = { > - .num_leds = ARRAY_SIZE(net2big_leds), > - .leds = net2big_leds, > -}; > - > -static struct platform_device net2big_gpio_leds = { > - .name = "leds-gpio", > - .id = -1, > - .dev = { > - .platform_data = &net2big_led_data, > - }, > -}; > - > -static void __init net2big_gpio_leds_init(void) > -{ > - int err; > - > - /* Stop initial CPLD slow red/blue blinking on power LED. */ > - err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP, > - "Power LED blink stop"); > - if (err == 0) { > - err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1); > - if (err) > - gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP); > - } > - if (err) > - pr_err("net2big: failed to setup power LED blink GPIO\n"); > - > - /* > - * Configure SATA0 and SATA1 blue LEDs to blink in relation with the > - * hard disk activity. > - */ > - err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED, > - "SATA0 blue LED control"); > - if (err == 0) { > - err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1); > - if (err) > - gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED); > - } > - if (err) > - pr_err("net2big: failed to setup SATA0 blue LED GPIO\n"); > - > - err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED, > - "SATA1 blue LED control"); > - if (err == 0) { > - err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1); > - if (err) > - gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED); > - } > - if (err) > - pr_err("net2big: failed to setup SATA1 blue LED GPIO\n"); > - > - gpiod_add_lookup_table(&net2big_leds_gpio_table); > - platform_device_register(&net2big_gpio_leds); > -} > - > -/**************************************************************************** > - * GPIO keys > - ****************************************************************************/ > - > -#define NET2BIG_GPIO_PUSH_BUTTON 18 > -#define NET2BIG_GPIO_POWER_SWITCH_ON 8 > -#define NET2BIG_GPIO_POWER_SWITCH_OFF 9 > - > -#define NET2BIG_SWITCH_POWER_ON 0x1 > -#define NET2BIG_SWITCH_POWER_OFF 0x2 > - > -static struct gpio_keys_button net2big_buttons[] = { > - { > - .type = EV_SW, > - .code = NET2BIG_SWITCH_POWER_OFF, > - .gpio = NET2BIG_GPIO_POWER_SWITCH_OFF, > - .desc = "Power rocker switch (auto|off)", > - .active_low = 0, > - }, > - { > - .type = EV_SW, > - .code = NET2BIG_SWITCH_POWER_ON, > - .gpio = NET2BIG_GPIO_POWER_SWITCH_ON, > - .desc = "Power rocker switch (on|auto)", > - .active_low = 0, > - }, > - { > - .type = EV_KEY, > - .code = KEY_POWER, > - .gpio = NET2BIG_GPIO_PUSH_BUTTON, > - .desc = "Front Push Button", > - .active_low = 0, > - }, > -}; > - > -static struct gpio_keys_platform_data net2big_button_data = { > - .buttons = net2big_buttons, > - .nbuttons = ARRAY_SIZE(net2big_buttons), > -}; > - > -static struct platform_device net2big_gpio_buttons = { > - .name = "gpio-keys", > - .id = -1, > - .dev = { > - .platform_data = &net2big_button_data, > - }, > -}; > - > -/***************************************************************************** > - * General Setup > - ****************************************************************************/ > - > -static unsigned int net2big_mpp_modes[] __initdata = { > - MPP0_GPIO, /* Raid mode (bit 0) */ > - MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ > - MPP2_GPIO, /* Raid mode (bit 1) */ > - MPP3_GPIO, /* Board ID (bit 0) */ > - MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */ > - MPP5_GPIO, /* Fan fail detection */ > - MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */ > - MPP7_GPIO, /* Disable initial blinking on front LED */ > - MPP8_GPIO, /* Rear power switch (on|auto) */ > - MPP9_GPIO, /* Rear power switch (auto|off) */ > - MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */ > - MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */ > - MPP12_GPIO, /* Board ID (bit 1) */ > - MPP13_GPIO, /* SATA 1 blue LED blink control */ > - MPP14_SATA_LED, > - MPP15_SATA_LED, > - MPP16_GPIO, /* Blue front LED control */ > - MPP17_GPIO, /* SATA 0 blue LED blink control */ > - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ > - MPP19_GPIO, /* SATA{0,1} power On/Off request */ > - 0, > - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ > - /* 23: SATA 0 power status */ > - /* 24: Board power off */ > - /* 25: SATA 1 power status */ > -}; > - > -#define NET2BIG_GPIO_POWER_OFF 24 > - > -static void net2big_power_off(void) > -{ > - gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1); > -} > - > -static void __init net2big_init(void) > -{ > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(net2big_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - orion5x_ehci0_init(); > - orion5x_ehci1_init(); > - orion5x_eth_init(&net2big_eth_data); > - orion5x_i2c_init(); > - orion5x_uart0_init(); > - orion5x_xor_init(); > - > - net2big_sata_power_init(); > - orion5x_sata_init(&net2big_sata_data); > - > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - NET2BIG_NOR_BOOT_BASE, > - NET2BIG_NOR_BOOT_SIZE); > - platform_device_register(&net2big_nor_flash); > - > - platform_device_register(&net2big_gpio_buttons); > - net2big_gpio_leds_init(); > - > - i2c_register_board_info(0, net2big_i2c_devices, > - ARRAY_SIZE(net2big_i2c_devices)); > - > - orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1); > - > - if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 && > - gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0) > - register_platform_power_off(net2big_power_off); > - else > - pr_err("net2big: failed to configure power-off GPIO\n"); > - > - pr_notice("net2big: Flash writing is not yet supported.\n"); > -} > - > -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ > -MACHINE_START(NET2BIG, "LaCie 2Big Network") > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = net2big_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c > index 06f5320036b1..3d1e6ad0e14b 100644 > --- a/arch/arm/mach-orion5x/pci.c > +++ b/arch/arm/mach-orion5x/pci.c > @@ -15,7 +15,6 @@ > #include <asm/irq.h> > #include <asm/mach/pci.h> > #include <plat/pcie.h> > -#include <plat/addr-map.h> > #include "common.h" > #include "orion5x.h" > > diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c > deleted file mode 100644 > index c3db3376950a..000000000000 > --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c > +++ /dev/null > @@ -1,366 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * Buffalo Terastation Pro II/Live Board Setup > - * > - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> > - */ > -#include <linux/gpio/legacy.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/pci.h> > -#include <linux/irq.h> > -#include <linux/delay.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/i2c.h> > -#include <linux/serial_reg.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/pci.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > - > -/***************************************************************************** > - * Terastation Pro 2/Live Info > - ****************************************************************************/ > - > -/* > - * Terastation Pro 2 hardware : > - * - Marvell 88F5281-D0 > - * - Marvell 88SX6042 SATA controller (PCI) > - * - Marvell 88E1118 Gigabit Ethernet PHY > - * - 256KB NOR flash > - * - 128MB of DDR RAM > - * - PCIe port (not equipped) > - */ > - > -/* > - * 256K NOR flash Device bus boot chip select > - */ > - > -#define TSP2_NOR_BOOT_BASE 0xf4000000 > -#define TSP2_NOR_BOOT_SIZE SZ_256K > - > -/***************************************************************************** > - * 256KB NOR Flash on BOOT Device > - ****************************************************************************/ > - > -static struct physmap_flash_data tsp2_nor_flash_data = { > - .width = 1, > -}; > - > -static struct resource tsp2_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = TSP2_NOR_BOOT_BASE, > - .end = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device tsp2_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &tsp2_nor_flash_data, > - }, > - .num_resources = 1, > - .resource = &tsp2_nor_flash_resource, > -}; > - > -/***************************************************************************** > - * PCI > - ****************************************************************************/ > -#define TSP2_PCI_SLOT0_OFFS 7 > -#define TSP2_PCI_SLOT0_IRQ_PIN 11 > - > -static void __init tsp2_pci_preinit(void) > -{ > - int pin; > - > - /* > - * Configure PCI GPIO IRQ pins > - */ > - pin = TSP2_PCI_SLOT0_IRQ_PIN; > - if (gpio_request(pin, "PCI Int1") == 0) { > - if (gpio_direction_input(pin) == 0) { > - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); > - } else { > - printk(KERN_ERR "tsp2_pci_preinit failed " > - "to set_irq_type pin %d\n", pin); > - gpio_free(pin); > - } > - } else { > - printk(KERN_ERR "tsp2_pci_preinit failed to " > - "gpio_request %d\n", pin); > - } > -} > - > -static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) > -{ > - int irq; > - > - /* > - * Check for devices with hard-wired IRQs. > - */ > - irq = orion5x_pci_map_irq(dev, slot, pin); > - if (irq != -1) > - return irq; > - > - /* > - * PCI IRQs are connected via GPIOs. > - */ > - if (slot == TSP2_PCI_SLOT0_OFFS) > - return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN); > - > - return -1; > -} > - > -static struct hw_pci tsp2_pci __initdata = { > - .nr_controllers = 2, > - .preinit = tsp2_pci_preinit, > - .setup = orion5x_pci_sys_setup, > - .scan = orion5x_pci_sys_scan_bus, > - .map_irq = tsp2_pci_map_irq, > -}; > - > -static int __init tsp2_pci_init(void) > -{ > - if (machine_is_terastation_pro2()) > - pci_common_init(&tsp2_pci); > - > - return 0; > -} > - > -subsys_initcall(tsp2_pci_init); > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > - > -static struct mv643xx_eth_platform_data tsp2_eth_data = { > - .phy_addr = 0, > -}; > - > -/***************************************************************************** > - * RTC 5C372a on I2C bus > - ****************************************************************************/ > - > -#define TSP2_RTC_GPIO 9 > - > -static struct i2c_board_info __initdata tsp2_i2c_rtc = { > - I2C_BOARD_INFO("rs5c372a", 0x32), > -}; > - > -/***************************************************************************** > - * Terastation Pro II specific power off method via UART1-attached > - * microcontroller > - ****************************************************************************/ > - > -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) > - > -static int tsp2_miconread(unsigned char *buf, int count) > -{ > - int i; > - int timeout; > - > - for (i = 0; i < count; i++) { > - timeout = 10; > - > - while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) { > - if (--timeout == 0) > - break; > - udelay(1000); > - } > - > - if (timeout == 0) > - break; > - buf[i] = readl(UART1_REG(RX)); > - } > - > - /* return read bytes */ > - return i; > -} > - > -static int tsp2_miconwrite(const unsigned char *buf, int count) > -{ > - int i = 0; > - > - while (count--) { > - while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE)) > - barrier(); > - writel(buf[i++], UART1_REG(TX)); > - } > - > - return 0; > -} > - > -static int tsp2_miconsend(const unsigned char *data, int count) > -{ > - int i; > - unsigned char checksum = 0; > - unsigned char recv_buf[40]; > - unsigned char send_buf[40]; > - unsigned char correct_ack[3]; > - int retry = 2; > - > - /* Generate checksum */ > - for (i = 0; i < count; i++) > - checksum -= data[i]; > - > - do { > - /* Send data */ > - tsp2_miconwrite(data, count); > - > - /* send checksum */ > - tsp2_miconwrite(&checksum, 1); > - > - if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) { > - printk(KERN_ERR ">%s: receive failed.\n", __func__); > - > - /* send preamble to clear the receive buffer */ > - memset(&send_buf, 0xff, sizeof(send_buf)); > - tsp2_miconwrite(send_buf, sizeof(send_buf)); > - > - /* make dummy reads */ > - mdelay(100); > - tsp2_miconread(recv_buf, sizeof(recv_buf)); > - } else { > - /* Generate expected ack */ > - correct_ack[0] = 0x01; > - correct_ack[1] = data[1]; > - correct_ack[2] = 0x00; > - > - /* checksum Check */ > - if ((recv_buf[0] + recv_buf[1] + recv_buf[2] + > - recv_buf[3]) & 0xFF) { > - printk(KERN_ERR ">%s: Checksum Error : " > - "Received data[%02x, %02x, %02x, %02x]" > - "\n", __func__, recv_buf[0], > - recv_buf[1], recv_buf[2], recv_buf[3]); > - } else { > - /* Check Received Data */ > - if (correct_ack[0] == recv_buf[0] && > - correct_ack[1] == recv_buf[1] && > - correct_ack[2] == recv_buf[2]) { > - /* Interval for next command */ > - mdelay(10); > - > - /* Receive ACK */ > - return 0; > - } > - } > - /* Received NAK or illegal Data */ > - printk(KERN_ERR ">%s: Error : NAK or Illegal Data " > - "Received\n", __func__); > - } > - } while (retry--); > - > - /* Interval for next command */ > - mdelay(10); > - > - return -1; > -} > - > -static void tsp2_power_off(void) > -{ > - const unsigned char watchdogkill[] = {0x01, 0x35, 0x00}; > - const unsigned char shutdownwait[] = {0x00, 0x0c}; > - const unsigned char poweroff[] = {0x00, 0x06}; > - /* 38400 baud divisor */ > - const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400)); > - > - pr_info("%s: triggering power-off...\n", __func__); > - > - /* hijack uart1 and reset into sane state (38400,8n1,even parity) */ > - writel(0x83, UART1_REG(LCR)); > - writel(divisor & 0xff, UART1_REG(DLL)); > - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); > - writel(0x1b, UART1_REG(LCR)); > - writel(0x00, UART1_REG(IER)); > - writel(0x07, UART1_REG(FCR)); > - writel(0x00, UART1_REG(MCR)); > - > - /* Send the commands to shutdown the Terastation Pro II */ > - tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ; > - tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ; > - tsp2_miconsend(poweroff, sizeof(poweroff)); > -} > - > -/***************************************************************************** > - * General Setup > - ****************************************************************************/ > -static unsigned int tsp2_mpp_modes[] __initdata = { > - MPP0_PCIE_RST_OUTn, > - MPP1_UNUSED, > - MPP2_UNUSED, > - MPP3_UNUSED, > - MPP4_NAND, /* BOOT NAND Flash REn */ > - MPP5_NAND, /* BOOT NAND Flash WEn */ > - MPP6_NAND, /* BOOT NAND Flash HREn[0] */ > - MPP7_NAND, /* BOOT NAND Flash WEn[0] */ > - MPP8_GPIO, /* MICON int */ > - MPP9_GPIO, /* RTC int */ > - MPP10_UNUSED, > - MPP11_GPIO, /* PCI Int A */ > - MPP12_UNUSED, > - MPP13_GPIO, /* UPS on UART0 enable */ > - MPP14_GPIO, /* UPS low battery detection */ > - MPP15_UNUSED, > - MPP16_UART, /* UART1 RXD */ > - MPP17_UART, /* UART1 TXD */ > - MPP18_UART, /* UART1 CTSn */ > - MPP19_UART, /* UART1 RTSn */ > - 0, > -}; > - > -static void __init tsp2_init(void) > -{ > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(tsp2_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - TSP2_NOR_BOOT_BASE, > - TSP2_NOR_BOOT_SIZE); > - platform_device_register(&tsp2_nor_flash); > - > - orion5x_ehci0_init(); > - orion5x_eth_init(&tsp2_eth_data); > - orion5x_i2c_init(); > - orion5x_uart0_init(); > - orion5x_uart1_init(); > - > - /* Get RTC IRQ and register the chip */ > - if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) { > - if (gpio_direction_input(TSP2_RTC_GPIO) == 0) > - tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO); > - else > - gpio_free(TSP2_RTC_GPIO); > - } > - if (tsp2_i2c_rtc.irq == 0) > - pr_warn("tsp2_init: failed to get RTC IRQ\n"); > - i2c_register_board_info(0, &tsp2_i2c_rtc, 1); > - > - /* register Terastation Pro II specific power-off method */ > - register_platform_power_off(tsp2_power_off); > -} > - > -MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") > - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = tsp2_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c > deleted file mode 100644 > index 25cd50306c65..000000000000 > --- a/arch/arm/mach-orion5x/ts209-setup.c > +++ /dev/null > @@ -1,331 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * QNAP TS-109/TS-209 Board Setup > - * > - * Maintainer: Byron Bradley <byron.bbradley@gmail.com> > - */ > -#include <linux/gpio/legacy.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/pci.h> > -#include <linux/irq.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mtd/rawnand.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <linux/i2c.h> > -#include <linux/serial_reg.h> > -#include <linux/ata_platform.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/pci.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > -#include "tsx09-common.h" > - > -#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 > -#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M > - > -/**************************************************************************** > - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the > - * partitions on the device because we want to keep compatibility with > - * existing QNAP firmware. > - * > - * Layout as used by QNAP: > - * [2] 0x00000000-0x00200000 : "Kernel" > - * [3] 0x00200000-0x00600000 : "RootFS1" > - * [4] 0x00600000-0x00700000 : "RootFS2" > - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) > - * [5] 0x00760000-0x00780000 : "U-Boot Config" > - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) > - ***************************************************************************/ > -static struct mtd_partition qnap_ts209_partitions[] = { > - { > - .name = "U-Boot", > - .size = 0x00080000, > - .offset = 0x00780000, > - .mask_flags = MTD_WRITEABLE, > - }, { > - .name = "Kernel", > - .size = 0x00200000, > - .offset = 0, > - }, { > - .name = "RootFS1", > - .size = 0x00400000, > - .offset = 0x00200000, > - }, { > - .name = "RootFS2", > - .size = 0x00100000, > - .offset = 0x00600000, > - }, { > - .name = "U-Boot Config", > - .size = 0x00020000, > - .offset = 0x00760000, > - }, { > - .name = "NAS Config", > - .size = 0x00060000, > - .offset = 0x00700000, > - .mask_flags = MTD_WRITEABLE, > - }, > -}; > - > -static struct physmap_flash_data qnap_ts209_nor_flash_data = { > - .width = 1, > - .parts = qnap_ts209_partitions, > - .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) > -}; > - > -static struct resource qnap_ts209_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = QNAP_TS209_NOR_BOOT_BASE, > - .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device qnap_ts209_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { > - .platform_data = &qnap_ts209_nor_flash_data, > - }, > - .resource = &qnap_ts209_nor_flash_resource, > - .num_resources = 1, > -}; > - > -/***************************************************************************** > - * PCI > - ****************************************************************************/ > - > -#define QNAP_TS209_PCI_SLOT0_OFFS 7 > -#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 > -#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 > - > -static void __init qnap_ts209_pci_preinit(void) > -{ > - int pin; > - > - /* > - * Configure PCI GPIO IRQ pins > - */ > - pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; > - if (gpio_request(pin, "PCI Int1") == 0) { > - if (gpio_direction_input(pin) == 0) { > - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); > - } else { > - printk(KERN_ERR "qnap_ts209_pci_preinit failed to " > - "set_irq_type pin %d\n", pin); > - gpio_free(pin); > - } > - } else { > - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " > - "%d\n", pin); > - } > - > - pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; > - if (gpio_request(pin, "PCI Int2") == 0) { > - if (gpio_direction_input(pin) == 0) { > - irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); > - } else { > - printk(KERN_ERR "qnap_ts209_pci_preinit failed " > - "to set_irq_type pin %d\n", pin); > - gpio_free(pin); > - } > - } else { > - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " > - "%d\n", pin); > - } > -} > - > -static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot, > - u8 pin) > -{ > - int irq; > - > - /* > - * Check for devices with hard-wired IRQs. > - */ > - irq = orion5x_pci_map_irq(dev, slot, pin); > - if (irq != -1) > - return irq; > - > - /* > - * PCI IRQs are connected via GPIOs. > - */ > - switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { > - case 0: > - return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); > - case 1: > - return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); > - default: > - return -1; > - } > -} > - > -static struct hw_pci qnap_ts209_pci __initdata = { > - .nr_controllers = 2, > - .preinit = qnap_ts209_pci_preinit, > - .setup = orion5x_pci_sys_setup, > - .scan = orion5x_pci_sys_scan_bus, > - .map_irq = qnap_ts209_pci_map_irq, > -}; > - > -static int __init qnap_ts209_pci_init(void) > -{ > - if (machine_is_ts209()) > - pci_common_init(&qnap_ts209_pci); > - > - return 0; > -} > - > -subsys_initcall(qnap_ts209_pci_init); > - > -/***************************************************************************** > - * RTC S35390A on I2C bus > - ****************************************************************************/ > - > -#define TS209_RTC_GPIO 3 > - > -static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { > - I2C_BOARD_INFO("s35390a", 0x30), > - .irq = 0, > -}; > - > -/**************************************************************************** > - * GPIO Attached Keys > - * Power button is attached to the PIC microcontroller > - ****************************************************************************/ > - > -#define QNAP_TS209_GPIO_KEY_MEDIA 1 > -#define QNAP_TS209_GPIO_KEY_RESET 2 > - > -static struct gpio_keys_button qnap_ts209_buttons[] = { > - { > - .code = KEY_COPY, > - .gpio = QNAP_TS209_GPIO_KEY_MEDIA, > - .desc = "USB Copy Button", > - .active_low = 1, > - }, { > - .code = KEY_RESTART, > - .gpio = QNAP_TS209_GPIO_KEY_RESET, > - .desc = "Reset Button", > - .active_low = 1, > - }, > -}; > - > -static struct gpio_keys_platform_data qnap_ts209_button_data = { > - .buttons = qnap_ts209_buttons, > - .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), > -}; > - > -static struct platform_device qnap_ts209_button_device = { > - .name = "gpio-keys", > - .id = -1, > - .num_resources = 0, > - .dev = { > - .platform_data = &qnap_ts209_button_data, > - }, > -}; > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -static struct mv_sata_platform_data qnap_ts209_sata_data = { > - .n_ports = 2, > -}; > - > -/***************************************************************************** > - > - * General Setup > - ****************************************************************************/ > -static unsigned int ts209_mpp_modes[] __initdata = { > - MPP0_UNUSED, > - MPP1_GPIO, /* USB copy button */ > - MPP2_GPIO, /* Load defaults button */ > - MPP3_GPIO, /* GPIO RTC */ > - MPP4_UNUSED, > - MPP5_UNUSED, > - MPP6_GPIO, /* PCI Int A */ > - MPP7_GPIO, /* PCI Int B */ > - MPP8_UNUSED, > - MPP9_UNUSED, > - MPP10_UNUSED, > - MPP11_UNUSED, > - MPP12_SATA_LED, /* SATA 0 presence */ > - MPP13_SATA_LED, /* SATA 1 presence */ > - MPP14_SATA_LED, /* SATA 0 active */ > - MPP15_SATA_LED, /* SATA 1 active */ > - MPP16_UART, /* UART1 RXD */ > - MPP17_UART, /* UART1 TXD */ > - MPP18_GPIO, /* SW_RST */ > - MPP19_UNUSED, > - 0, > -}; > - > -static void __init qnap_ts209_init(void) > -{ > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(ts209_mpp_modes); > - > - /* > - * MPP[20] PCI clock 0 > - * MPP[21] PCI clock 1 > - * MPP[22] USB 0 over current > - * MPP[23-25] Reserved > - */ > - > - /* > - * Configure peripherals. > - */ > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - QNAP_TS209_NOR_BOOT_BASE, > - QNAP_TS209_NOR_BOOT_SIZE); > - platform_device_register(&qnap_ts209_nor_flash); > - > - orion5x_ehci0_init(); > - orion5x_ehci1_init(); > - qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE + > - qnap_ts209_partitions[5].offset, > - qnap_ts209_partitions[5].size); > - orion5x_eth_init(&qnap_tsx09_eth_data); > - orion5x_i2c_init(); > - orion5x_sata_init(&qnap_ts209_sata_data); > - orion5x_uart0_init(); > - orion5x_uart1_init(); > - orion5x_xor_init(); > - > - platform_device_register(&qnap_ts209_button_device); > - > - /* Get RTC IRQ and register the chip */ > - if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { > - if (gpio_direction_input(TS209_RTC_GPIO) == 0) > - qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); > - else > - gpio_free(TS209_RTC_GPIO); > - } > - if (qnap_ts209_i2c_rtc.irq == 0) > - pr_warn("qnap_ts209_init: failed to get RTC IRQ\n"); > - i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); > - > - /* register tsx09 specific power-off method */ > - register_platform_power_off(qnap_tsx09_power_off); > -} > - > -MACHINE_START(TS209, "QNAP TS-109/TS-209") > - /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = qnap_ts209_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c > deleted file mode 100644 > index f92acef0b45f..000000000000 > --- a/arch/arm/mach-orion5x/ts409-setup.c > +++ /dev/null > @@ -1,329 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * QNAP TS-409 Board Setup > - * > - * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> > - * > - * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com> > - * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> > - */ > -#include <linux/gpio/legacy.h> > -#include <linux/gpio/machine.h> > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/pci.h> > -#include <linux/irq.h> > -#include <linux/mtd/physmap.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/leds.h> > -#include <linux/gpio_keys.h> > -#include <linux/input.h> > -#include <linux/i2c.h> > -#include <linux/serial_reg.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/pci.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > -#include "tsx09-common.h" > - > -/***************************************************************************** > - * QNAP TS-409 Info > - ****************************************************************************/ > - > -/* > - * QNAP TS-409 hardware : > - * - Marvell 88F5281-D0 > - * - Marvell 88SX7042 SATA controller (PCIe) > - * - Marvell 88E1118 Gigabit Ethernet PHY > - * - RTC S35390A (@0x30) on I2C bus > - * - 8MB NOR flash > - * - 256MB of DDR-2 RAM > - */ > - > -/* > - * 8MB NOR flash Device bus boot chip select > - */ > - > -#define QNAP_TS409_NOR_BOOT_BASE 0xff800000 > -#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M > - > -/**************************************************************************** > - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the > - * partitions on the device because we want to keep compatibility with > - * existing QNAP firmware. > - * > - * Layout as used by QNAP: > - * [2] 0x00000000-0x00200000 : "Kernel" > - * [3] 0x00200000-0x00600000 : "RootFS1" > - * [4] 0x00600000-0x00700000 : "RootFS2" > - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) > - * [5] 0x00760000-0x00780000 : "U-Boot Config" > - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) > - ***************************************************************************/ > -static struct mtd_partition qnap_ts409_partitions[] = { > - { > - .name = "U-Boot", > - .size = 0x00080000, > - .offset = 0x00780000, > - .mask_flags = MTD_WRITEABLE, > - }, { > - .name = "Kernel", > - .size = 0x00200000, > - .offset = 0, > - }, { > - .name = "RootFS1", > - .size = 0x00400000, > - .offset = 0x00200000, > - }, { > - .name = "RootFS2", > - .size = 0x00100000, > - .offset = 0x00600000, > - }, { > - .name = "U-Boot Config", > - .size = 0x00020000, > - .offset = 0x00760000, > - }, { > - .name = "NAS Config", > - .size = 0x00060000, > - .offset = 0x00700000, > - .mask_flags = MTD_WRITEABLE, > - }, > -}; > - > -static struct physmap_flash_data qnap_ts409_nor_flash_data = { > - .width = 1, > - .parts = qnap_ts409_partitions, > - .nr_parts = ARRAY_SIZE(qnap_ts409_partitions) > -}; > - > -static struct resource qnap_ts409_nor_flash_resource = { > - .flags = IORESOURCE_MEM, > - .start = QNAP_TS409_NOR_BOOT_BASE, > - .end = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1, > -}; > - > -static struct platform_device qnap_ts409_nor_flash = { > - .name = "physmap-flash", > - .id = 0, > - .dev = { .platform_data = &qnap_ts409_nor_flash_data, }, > - .num_resources = 1, > - .resource = &qnap_ts409_nor_flash_resource, > -}; > - > -/***************************************************************************** > - * PCI > - ****************************************************************************/ > - > -static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot, > - u8 pin) > -{ > - int irq; > - > - /* > - * Check for devices with hard-wired IRQs. > - */ > - irq = orion5x_pci_map_irq(dev, slot, pin); > - if (irq != -1) > - return irq; > - > - /* > - * PCI isn't used on the TS-409 > - */ > - return -1; > -} > - > -static struct hw_pci qnap_ts409_pci __initdata = { > - .nr_controllers = 2, > - .setup = orion5x_pci_sys_setup, > - .scan = orion5x_pci_sys_scan_bus, > - .map_irq = qnap_ts409_pci_map_irq, > -}; > - > -static int __init qnap_ts409_pci_init(void) > -{ > - if (machine_is_ts409()) > - pci_common_init(&qnap_ts409_pci); > - > - return 0; > -} > - > -subsys_initcall(qnap_ts409_pci_init); > - > -/***************************************************************************** > - * RTC S35390A on I2C bus > - ****************************************************************************/ > - > -#define TS409_RTC_GPIO 10 > - > -static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = { > - I2C_BOARD_INFO("s35390a", 0x30), > -}; > - > -/***************************************************************************** > - * LEDs attached to GPIO > - ****************************************************************************/ > - > -static struct gpio_led ts409_led_pins[] = { > - { > - .name = "ts409:red:sata1", > - }, { > - .name = "ts409:red:sata2", > - }, { > - .name = "ts409:red:sata3", > - }, { > - .name = "ts409:red:sata4", > - }, > -}; > - > -static struct gpiod_lookup_table ts409_leds_gpio_table = { > - .dev_id = "leds-gpio", > - .table = { > - GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL, > - 0, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL, > - 1, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL, > - 2, GPIO_ACTIVE_LOW), > - GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL, > - 3, GPIO_ACTIVE_LOW), > - { }, > - }, > -}; > - > -static struct gpio_led_platform_data ts409_led_data = { > - .leds = ts409_led_pins, > - .num_leds = ARRAY_SIZE(ts409_led_pins), > -}; > - > -static struct platform_device ts409_leds = { > - .name = "leds-gpio", > - .id = -1, > - .dev = { > - .platform_data = &ts409_led_data, > - }, > -}; > - > -/**************************************************************************** > - * GPIO Attached Keys > - * Power button is attached to the PIC microcontroller > - ****************************************************************************/ > - > -#define QNAP_TS409_GPIO_KEY_RESET 14 > -#define QNAP_TS409_GPIO_KEY_MEDIA 15 > - > -static struct gpio_keys_button qnap_ts409_buttons[] = { > - { > - .code = KEY_RESTART, > - .gpio = QNAP_TS409_GPIO_KEY_RESET, > - .desc = "Reset Button", > - .active_low = 1, > - }, { > - .code = KEY_COPY, > - .gpio = QNAP_TS409_GPIO_KEY_MEDIA, > - .desc = "USB Copy Button", > - .active_low = 1, > - }, > -}; > - > -static struct gpio_keys_platform_data qnap_ts409_button_data = { > - .buttons = qnap_ts409_buttons, > - .nbuttons = ARRAY_SIZE(qnap_ts409_buttons), > -}; > - > -static struct platform_device qnap_ts409_button_device = { > - .name = "gpio-keys", > - .id = -1, > - .num_resources = 0, > - .dev = { > - .platform_data = &qnap_ts409_button_data, > - }, > -}; > - > -/***************************************************************************** > - * General Setup > - ****************************************************************************/ > -static unsigned int ts409_mpp_modes[] __initdata = { > - MPP0_UNUSED, > - MPP1_UNUSED, > - MPP2_UNUSED, > - MPP3_UNUSED, > - MPP4_GPIO, /* HDD 1 status */ > - MPP5_GPIO, /* HDD 2 status */ > - MPP6_GPIO, /* HDD 3 status */ > - MPP7_GPIO, /* HDD 4 status */ > - MPP8_UNUSED, > - MPP9_UNUSED, > - MPP10_GPIO, /* RTC int */ > - MPP11_UNUSED, > - MPP12_UNUSED, > - MPP13_UNUSED, > - MPP14_GPIO, /* SW_RST */ > - MPP15_GPIO, /* USB copy button */ > - MPP16_UART, /* UART1 RXD */ > - MPP17_UART, /* UART1 TXD */ > - MPP18_UNUSED, > - MPP19_UNUSED, > - 0, > -}; > - > -static void __init qnap_ts409_init(void) > -{ > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(ts409_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, > - ORION_MBUS_DEVBUS_BOOT_ATTR, > - QNAP_TS409_NOR_BOOT_BASE, > - QNAP_TS409_NOR_BOOT_SIZE); > - platform_device_register(&qnap_ts409_nor_flash); > - > - orion5x_ehci0_init(); > - qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE + > - qnap_ts409_partitions[5].offset, > - qnap_ts409_partitions[5].size); > - orion5x_eth_init(&qnap_tsx09_eth_data); > - orion5x_i2c_init(); > - orion5x_uart0_init(); > - orion5x_uart1_init(); > - > - platform_device_register(&qnap_ts409_button_device); > - > - /* Get RTC IRQ and register the chip */ > - if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) { > - if (gpio_direction_input(TS409_RTC_GPIO) == 0) > - qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO); > - else > - gpio_free(TS409_RTC_GPIO); > - } > - if (qnap_ts409_i2c_rtc.irq == 0) > - pr_warn("qnap_ts409_init: failed to get RTC IRQ\n"); > - i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1); > - gpiod_add_lookup_table(&ts409_leds_gpio_table); > - platform_device_register(&ts409_leds); > - > - /* register tsx09 specific power-off method */ > - register_platform_power_off(qnap_tsx09_power_off); > -} > - > -MACHINE_START(TS409, "QNAP TS-409") > - /* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = qnap_ts409_init, > - .map_io = orion5x_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .fixup = tag_fixup_mem32, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h > deleted file mode 100644 > index 2f4fe3ca5c1a..000000000000 > --- a/arch/arm/mach-orion5x/ts78xx-fpga.h > +++ /dev/null > @@ -1,42 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#define TS7800_FPGA_MAGIC 0x00b480 > -#define FPGAID(_magic, _rev) ((_magic << 8) + _rev) > - > -/* > - * get yer id's from http://ts78xx.digriz.org.uk/ > - * do *not* make up your own or 'borrow' any! > - */ > -enum fpga_ids { > - /* Technologic Systems */ > - TS7800_REV_1 = FPGAID(TS7800_FPGA_MAGIC, 0x01), > - TS7800_REV_2 = FPGAID(TS7800_FPGA_MAGIC, 0x02), > - TS7800_REV_3 = FPGAID(TS7800_FPGA_MAGIC, 0x03), > - TS7800_REV_4 = FPGAID(TS7800_FPGA_MAGIC, 0x04), > - TS7800_REV_5 = FPGAID(TS7800_FPGA_MAGIC, 0x05), > - TS7800_REV_6 = FPGAID(TS7800_FPGA_MAGIC, 0x06), > - TS7800_REV_7 = FPGAID(TS7800_FPGA_MAGIC, 0x07), > - TS7800_REV_8 = FPGAID(TS7800_FPGA_MAGIC, 0x08), > - TS7800_REV_9 = FPGAID(TS7800_FPGA_MAGIC, 0x09), > - > - /* Unaffordable & Expensive */ > - UAE_DUMMY = FPGAID(0xffffff, 0x01), > -}; > - > -struct fpga_device { > - unsigned present:1; > - unsigned init:1; > -}; > - > -struct fpga_devices { > - /* Technologic Systems */ > - struct fpga_device ts_rtc; > - struct fpga_device ts_nand; > - struct fpga_device ts_rng; > -}; > - > -struct ts78xx_fpga_data { > - unsigned int id; > - int state; > - > - struct fpga_devices supports; > -}; > diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c > deleted file mode 100644 > index af810e7ccd79..000000000000 > --- a/arch/arm/mach-orion5x/ts78xx-setup.c > +++ /dev/null > @@ -1,574 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* > - * arch/arm/mach-orion5x/ts78xx-setup.c > - * > - * Maintainer: Alexander Clouter <alex@digriz.org.uk> > - */ > - > -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/sysfs.h> > -#include <linux/platform_device.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/ata_platform.h> > -#include <linux/mtd/platnand.h> > -#include <linux/timeriomem-rng.h> > -#include <asm/mach-types.h> > -#include <asm/mach/arch.h> > -#include <asm/mach/map.h> > -#include "common.h" > -#include "mpp.h" > -#include "orion5x.h" > -#include "ts78xx-fpga.h" > - > -/***************************************************************************** > - * TS-78xx Info > - ****************************************************************************/ > - > -/* > - * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE > - */ > -#define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000 > -#define TS78XX_FPGA_REGS_VIRT_BASE IOMEM(0xff900000) > -#define TS78XX_FPGA_REGS_SIZE SZ_1M > - > -static struct ts78xx_fpga_data ts78xx_fpga = { > - .id = 0, > - .state = 1, > -/* .supports = ... - populated by ts78xx_fpga_supports() */ > -}; > - > -/***************************************************************************** > - * I/O Address Mapping > - ****************************************************************************/ > -static struct map_desc ts78xx_io_desc[] __initdata = { > - { > - .virtual = (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE, > - .pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE), > - .length = TS78XX_FPGA_REGS_SIZE, > - .type = MT_DEVICE, > - }, > -}; > - > -static void __init ts78xx_map_io(void) > -{ > - orion5x_map_io(); > - iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc)); > -} > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > -static struct mv643xx_eth_platform_data ts78xx_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(0), > -}; > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -static struct mv_sata_platform_data ts78xx_sata_data = { > - .n_ports = 2, > -}; > - > -/***************************************************************************** > - * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c > - ****************************************************************************/ > -#define TS_RTC_CTRL (TS78XX_FPGA_REGS_PHYS_BASE + 0x808) > -#define TS_RTC_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x80c) > - > -static struct resource ts78xx_ts_rtc_resources[] = { > - DEFINE_RES_MEM(TS_RTC_CTRL, 0x01), > - DEFINE_RES_MEM(TS_RTC_DATA, 0x01), > -}; > - > -static struct platform_device ts78xx_ts_rtc_device = { > - .name = "rtc-m48t86", > - .id = -1, > - .resource = ts78xx_ts_rtc_resources, > - .num_resources = ARRAY_SIZE(ts78xx_ts_rtc_resources), > -}; > - > -static int ts78xx_ts_rtc_load(void) > -{ > - int rc; > - > - if (ts78xx_fpga.supports.ts_rtc.init == 0) { > - rc = platform_device_register(&ts78xx_ts_rtc_device); > - if (!rc) > - ts78xx_fpga.supports.ts_rtc.init = 1; > - } else { > - rc = platform_device_add(&ts78xx_ts_rtc_device); > - } > - > - if (rc) > - pr_info("RTC could not be registered: %d\n", rc); > - > - return rc; > -} > - > -static void ts78xx_ts_rtc_unload(void) > -{ > - platform_device_del(&ts78xx_ts_rtc_device); > -} > - > -/***************************************************************************** > - * NAND Flash > - ****************************************************************************/ > -#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE + 0x800) /* VIRT */ > -#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE + 0x804) /* PHYS */ > - > -/* > - * hardware specific access to control-lines > - * > - * ctrl: > - * NAND_NCE: bit 0 -> bit 2 > - * NAND_CLE: bit 1 -> bit 1 > - * NAND_ALE: bit 2 -> bit 0 > - */ > -static void ts78xx_ts_nand_cmd_ctrl(struct nand_chip *this, int cmd, > - unsigned int ctrl) > -{ > - if (ctrl & NAND_CTRL_CHANGE) { > - unsigned char bits; > - > - bits = (ctrl & NAND_NCE) << 2; > - bits |= ctrl & NAND_CLE; > - bits |= (ctrl & NAND_ALE) >> 2; > - > - writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL); > - } > - > - if (cmd != NAND_CMD_NONE) > - writeb(cmd, this->legacy.IO_ADDR_W); > -} > - > -static int ts78xx_ts_nand_dev_ready(struct nand_chip *chip) > -{ > - return readb(TS_NAND_CTRL) & 0x20; > -} > - > -static void ts78xx_ts_nand_write_buf(struct nand_chip *chip, > - const uint8_t *buf, int len) > -{ > - void __iomem *io_base = chip->legacy.IO_ADDR_W; > - unsigned long off = ((unsigned long)buf & 3); > - int sz; > - > - if (off) { > - sz = min_t(int, 4 - off, len); > - writesb(io_base, buf, sz); > - buf += sz; > - len -= sz; > - } > - > - sz = len >> 2; > - if (sz) { > - u32 *buf32 = (u32 *)buf; > - writesl(io_base, buf32, sz); > - buf += sz << 2; > - len -= sz << 2; > - } > - > - if (len) > - writesb(io_base, buf, len); > -} > - > -static void ts78xx_ts_nand_read_buf(struct nand_chip *chip, > - uint8_t *buf, int len) > -{ > - void __iomem *io_base = chip->legacy.IO_ADDR_R; > - unsigned long off = ((unsigned long)buf & 3); > - int sz; > - > - if (off) { > - sz = min_t(int, 4 - off, len); > - readsb(io_base, buf, sz); > - buf += sz; > - len -= sz; > - } > - > - sz = len >> 2; > - if (sz) { > - u32 *buf32 = (u32 *)buf; > - readsl(io_base, buf32, sz); > - buf += sz << 2; > - len -= sz << 2; > - } > - > - if (len) > - readsb(io_base, buf, len); > -} > - > -static struct mtd_partition ts78xx_ts_nand_parts[] = { > - { > - .name = "mbr", > - .offset = 0, > - .size = SZ_128K, > - .mask_flags = MTD_WRITEABLE, > - }, { > - .name = "kernel", > - .offset = MTDPART_OFS_APPEND, > - .size = SZ_4M, > - }, { > - .name = "initrd", > - .offset = MTDPART_OFS_APPEND, > - .size = SZ_4M, > - }, { > - .name = "rootfs", > - .offset = MTDPART_OFS_APPEND, > - .size = MTDPART_SIZ_FULL, > - } > -}; > - > -static struct platform_nand_data ts78xx_ts_nand_data = { > - .chip = { > - .nr_chips = 1, > - .partitions = ts78xx_ts_nand_parts, > - .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), > - .chip_delay = 15, > - .bbt_options = NAND_BBT_USE_FLASH, > - }, > - .ctrl = { > - /* > - * The HW ECC offloading functions, used to give about a 9% > - * performance increase for 'dd if=/dev/mtdblockX' and 5% for > - * nanddump. This all however was changed by git commit > - * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is > - * no performance advantage to be had so we no longer bother > - */ > - .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl, > - .dev_ready = ts78xx_ts_nand_dev_ready, > - .write_buf = ts78xx_ts_nand_write_buf, > - .read_buf = ts78xx_ts_nand_read_buf, > - }, > -}; > - > -static struct resource ts78xx_ts_nand_resources > - = DEFINE_RES_MEM(TS_NAND_DATA, 4); > - > -static struct platform_device ts78xx_ts_nand_device = { > - .name = "gen_nand", > - .id = -1, > - .dev = { > - .platform_data = &ts78xx_ts_nand_data, > - }, > - .resource = &ts78xx_ts_nand_resources, > - .num_resources = 1, > -}; > - > -static int ts78xx_ts_nand_load(void) > -{ > - int rc; > - > - if (ts78xx_fpga.supports.ts_nand.init == 0) { > - rc = platform_device_register(&ts78xx_ts_nand_device); > - if (!rc) > - ts78xx_fpga.supports.ts_nand.init = 1; > - } else > - rc = platform_device_add(&ts78xx_ts_nand_device); > - > - if (rc) > - pr_info("NAND could not be registered: %d\n", rc); > - return rc; > -}; > - > -static void ts78xx_ts_nand_unload(void) > -{ > - platform_device_del(&ts78xx_ts_nand_device); > -} > - > -/***************************************************************************** > - * HW RNG > - ****************************************************************************/ > -#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) > - > -static struct resource ts78xx_ts_rng_resource > - = DEFINE_RES_MEM(TS_RNG_DATA, 4); > - > -static struct timeriomem_rng_data ts78xx_ts_rng_data = { > - .period = 1000000, /* one second */ > -}; > - > -static struct platform_device ts78xx_ts_rng_device = { > - .name = "timeriomem_rng", > - .id = -1, > - .dev = { > - .platform_data = &ts78xx_ts_rng_data, > - }, > - .resource = &ts78xx_ts_rng_resource, > - .num_resources = 1, > -}; > - > -static int ts78xx_ts_rng_load(void) > -{ > - int rc; > - > - if (ts78xx_fpga.supports.ts_rng.init == 0) { > - rc = platform_device_register(&ts78xx_ts_rng_device); > - if (!rc) > - ts78xx_fpga.supports.ts_rng.init = 1; > - } else > - rc = platform_device_add(&ts78xx_ts_rng_device); > - > - if (rc) > - pr_info("RNG could not be registered: %d\n", rc); > - return rc; > -}; > - > -static void ts78xx_ts_rng_unload(void) > -{ > - platform_device_del(&ts78xx_ts_rng_device); > -} > - > -/***************************************************************************** > - * FPGA 'hotplug' support code > - ****************************************************************************/ > -static void ts78xx_fpga_devices_zero_init(void) > -{ > - ts78xx_fpga.supports.ts_rtc.init = 0; > - ts78xx_fpga.supports.ts_nand.init = 0; > - ts78xx_fpga.supports.ts_rng.init = 0; > -} > - > -static void ts78xx_fpga_supports(void) > -{ > - /* TODO: put this 'table' into ts78xx-fpga.h */ > - switch (ts78xx_fpga.id) { > - case TS7800_REV_1: > - case TS7800_REV_2: > - case TS7800_REV_3: > - case TS7800_REV_4: > - case TS7800_REV_5: > - case TS7800_REV_6: > - case TS7800_REV_7: > - case TS7800_REV_8: > - case TS7800_REV_9: > - ts78xx_fpga.supports.ts_rtc.present = 1; > - ts78xx_fpga.supports.ts_nand.present = 1; > - ts78xx_fpga.supports.ts_rng.present = 1; > - break; > - default: > - /* enable devices if magic matches */ > - switch ((ts78xx_fpga.id >> 8) & 0xffffff) { > - case TS7800_FPGA_MAGIC: > - pr_warn("unrecognised FPGA revision 0x%.2x\n", > - ts78xx_fpga.id & 0xff); > - ts78xx_fpga.supports.ts_rtc.present = 1; > - ts78xx_fpga.supports.ts_nand.present = 1; > - ts78xx_fpga.supports.ts_rng.present = 1; > - break; > - default: > - ts78xx_fpga.supports.ts_rtc.present = 0; > - ts78xx_fpga.supports.ts_nand.present = 0; > - ts78xx_fpga.supports.ts_rng.present = 0; > - } > - } > -} > - > -static int ts78xx_fpga_load_devices(void) > -{ > - int tmp, ret = 0; > - > - if (ts78xx_fpga.supports.ts_rtc.present == 1) { > - tmp = ts78xx_ts_rtc_load(); > - if (tmp) > - ts78xx_fpga.supports.ts_rtc.present = 0; > - ret |= tmp; > - } > - if (ts78xx_fpga.supports.ts_nand.present == 1) { > - tmp = ts78xx_ts_nand_load(); > - if (tmp) > - ts78xx_fpga.supports.ts_nand.present = 0; > - ret |= tmp; > - } > - if (ts78xx_fpga.supports.ts_rng.present == 1) { > - tmp = ts78xx_ts_rng_load(); > - if (tmp) > - ts78xx_fpga.supports.ts_rng.present = 0; > - ret |= tmp; > - } > - > - return ret; > -} > - > -static int ts78xx_fpga_unload_devices(void) > -{ > - > - if (ts78xx_fpga.supports.ts_rtc.present == 1) > - ts78xx_ts_rtc_unload(); > - if (ts78xx_fpga.supports.ts_nand.present == 1) > - ts78xx_ts_nand_unload(); > - if (ts78xx_fpga.supports.ts_rng.present == 1) > - ts78xx_ts_rng_unload(); > - > - return 0; > -} > - > -static int ts78xx_fpga_load(void) > -{ > - ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); > - > - pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n", > - (ts78xx_fpga.id >> 8) & 0xffffff, > - ts78xx_fpga.id & 0xff); > - > - ts78xx_fpga_supports(); > - > - if (ts78xx_fpga_load_devices()) { > - ts78xx_fpga.state = -1; > - return -EBUSY; > - } > - > - return 0; > -}; > - > -static int ts78xx_fpga_unload(void) > -{ > - unsigned int fpga_id; > - > - fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE); > - > - /* > - * There does not seem to be a feasible way to block access to the GPIO > - * pins from userspace (/dev/mem). This if clause should hopefully warn > - * those foolish enough not to follow 'policy' :) > - * > - * UrJTAG SVN since r1381 can be used to reprogram the FPGA > - */ > - if (ts78xx_fpga.id != fpga_id) { > - pr_err("FPGA magic/rev mismatch\n" > - "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", > - (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, > - (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); > - ts78xx_fpga.state = -1; > - return -EBUSY; > - } > - > - if (ts78xx_fpga_unload_devices()) { > - ts78xx_fpga.state = -1; > - return -EBUSY; > - } > - > - return 0; > -}; > - > -static ssize_t ts78xx_fpga_show(struct kobject *kobj, > - struct kobj_attribute *attr, char *buf) > -{ > - if (ts78xx_fpga.state < 0) > - return sprintf(buf, "borked\n"); > - > - return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline"); > -} > - > -static ssize_t ts78xx_fpga_store(struct kobject *kobj, > - struct kobj_attribute *attr, const char *buf, size_t n) > -{ > - int value, ret; > - > - if (ts78xx_fpga.state < 0) { > - pr_err("FPGA borked, you must powercycle ASAP\n"); > - return -EBUSY; > - } > - > - if (strncmp(buf, "online", sizeof("online") - 1) == 0) > - value = 1; > - else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) > - value = 0; > - else > - return -EINVAL; > - > - if (ts78xx_fpga.state == value) > - return n; > - > - ret = (ts78xx_fpga.state == 0) > - ? ts78xx_fpga_load() > - : ts78xx_fpga_unload(); > - > - if (!(ret < 0)) > - ts78xx_fpga.state = value; > - > - return n; > -} > - > -static struct kobj_attribute ts78xx_fpga_attr = > - __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store); > - > -/***************************************************************************** > - * General Setup > - ****************************************************************************/ > -static unsigned int ts78xx_mpp_modes[] __initdata = { > - MPP0_UNUSED, > - MPP1_GPIO, /* JTAG Clock */ > - MPP2_GPIO, /* JTAG Data In */ > - MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ > - MPP4_GPIO, /* JTAG Data Out */ > - MPP5_GPIO, /* JTAG TMS */ > - MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ > - MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ > - MPP8_UNUSED, > - MPP9_UNUSED, > - MPP10_UNUSED, > - MPP11_UNUSED, > - MPP12_UNUSED, > - MPP13_UNUSED, > - MPP14_UNUSED, > - MPP15_UNUSED, > - MPP16_UART, > - MPP17_UART, > - MPP18_UART, > - MPP19_UART, > - /* > - * MPP[20] PCI Clock Out 1 > - * MPP[21] PCI Clock Out 0 > - * MPP[22] Unused > - * MPP[23] Unused > - * MPP[24] Unused > - * MPP[25] Unused > - */ > - 0, > -}; > - > -static void __init ts78xx_init(void) > -{ > - int ret; > - > - /* > - * Setup basic Orion functions. Need to be called early. > - */ > - orion5x_init(); > - > - orion5x_mpp_conf(ts78xx_mpp_modes); > - > - /* > - * Configure peripherals. > - */ > - orion5x_ehci0_init(); > - orion5x_ehci1_init(); > - orion5x_eth_init(&ts78xx_eth_data); > - orion5x_sata_init(&ts78xx_sata_data); > - orion5x_uart0_init(); > - orion5x_uart1_init(); > - orion5x_xor_init(); > - > - /* FPGA init */ > - ts78xx_fpga_devices_zero_init(); > - ret = ts78xx_fpga_load(); > - ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr); > - if (ret) > - pr_err("sysfs_create_file failed: %d\n", ret); > -} > - > -MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") > - /* Maintainer: Alexander Clouter <alex@digriz.org.uk> */ > - .atag_offset = 0x100, > - .nr_irqs = ORION5X_NR_IRQS, > - .init_machine = ts78xx_init, > - .map_io = ts78xx_map_io, > - .init_early = orion5x_init_early, > - .init_irq = orion5x_init_irq, > - .init_time = orion5x_timer_init, > - .restart = orion5x_restart, > -MACHINE_END > diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c > deleted file mode 100644 > index 099e6fdfa8e6..000000000000 > --- a/arch/arm/mach-orion5x/tsx09-common.c > +++ /dev/null > @@ -1,129 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * QNAP TS-x09 Boards common functions > - * > - * Maintainers: Lennert Buytenhek <buytenh@marvell.com> > - * Byron Bradley <byron.bbradley@gmail.com> > - */ > - > -#include <linux/kernel.h> > -#include <linux/pci.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/timex.h> > -#include <linux/serial_reg.h> > -#include "orion5x.h" > -#include "tsx09-common.h" > -#include "common.h" > - > -/***************************************************************************** > - * QNAP TS-x09 specific power off method via UART1-attached PIC > - ****************************************************************************/ > - > -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) > - > -void qnap_tsx09_power_off(void) > -{ > - /* 19200 baud divisor */ > - const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200)); > - > - pr_info("%s: triggering power-off...\n", __func__); > - > - /* hijack uart1 and reset into sane state (19200,8n1) */ > - writel(0x83, UART1_REG(LCR)); > - writel(divisor & 0xff, UART1_REG(DLL)); > - writel((divisor >> 8) & 0xff, UART1_REG(DLM)); > - writel(0x03, UART1_REG(LCR)); > - writel(0x00, UART1_REG(IER)); > - writel(0x00, UART1_REG(FCR)); > - writel(0x00, UART1_REG(MCR)); > - > - /* send the power-off command 'A' to PIC */ > - writel('A', UART1_REG(TX)); > -} > - > -/***************************************************************************** > - * Ethernet > - ****************************************************************************/ > - > -struct mv643xx_eth_platform_data qnap_tsx09_eth_data = { > - .phy_addr = MV643XX_ETH_PHY_ADDR(8), > -}; > - > -static int __init qnap_tsx09_parse_hex_nibble(char n) > -{ > - if (n >= '0' && n <= '9') > - return n - '0'; > - > - if (n >= 'A' && n <= 'F') > - return n - 'A' + 10; > - > - if (n >= 'a' && n <= 'f') > - return n - 'a' + 10; > - > - return -1; > -} > - > -static int __init qnap_tsx09_parse_hex_byte(const char *b) > -{ > - int hi; > - int lo; > - > - hi = qnap_tsx09_parse_hex_nibble(b[0]); > - lo = qnap_tsx09_parse_hex_nibble(b[1]); > - > - if (hi < 0 || lo < 0) > - return -1; > - > - return (hi << 4) | lo; > -} > - > -static int __init qnap_tsx09_check_mac_addr(const char *addr_str) > -{ > - u_int8_t addr[6]; > - int i; > - > - for (i = 0; i < 6; i++) { > - int byte; > - > - /* > - * Enforce "xx:xx:xx:xx:xx:xx\n" format. > - */ > - if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) > - return -1; > - > - byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3)); > - if (byte < 0) > - return -1; > - addr[i] = byte; > - } > - > - printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr); > - > - memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6); > - > - return 0; > -} > - > -/* > - * The 'NAS Config' flash partition has an ext2 filesystem which > - * contains a file that has the ethernet MAC address in plain text > - * (format "xx:xx:xx:xx:xx:xx\n"). > - */ > -void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size) > -{ > - unsigned long addr; > - > - for (addr = mem_base; addr < (mem_base + size); addr += 1024) { > - char *nor_page; > - int ret = 0; > - > - nor_page = ioremap(addr, 1024); > - if (nor_page != NULL) { > - ret = qnap_tsx09_check_mac_addr(nor_page); > - iounmap(nor_page); > - } > - > - if (ret == 0) > - break; > - } > -} > diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h > deleted file mode 100644 > index 72bedc6b82fb..000000000000 > --- a/arch/arm/mach-orion5x/tsx09-common.h > +++ /dev/null > @@ -1,21 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef __ARCH_ORION5X_TSX09_COMMON_H > -#define __ARCH_ORION5X_TSX09_COMMON_H > - > -/* > - * QNAP TS-x09 Boards power-off function > - */ > -extern void qnap_tsx09_power_off(void); > - > -/* > - * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory > - */ > -extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size); > - > -/* > - * QNAP TS-x09 Boards ethernet declaration > - */ > -extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data; > - > - > -#endif > diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig > index 6574659dfb61..c40cdb2274ea 100644 > --- a/arch/arm/mm/Kconfig > +++ b/arch/arm/mm/Kconfig > @@ -980,7 +980,7 @@ config CACHE_B15_RAC > > config CACHE_FEROCEON_L2 > bool "Enable the Feroceon L2 cache controller" > - depends on ARCH_MV78XX0 || ARCH_MVEBU > + depends on ARCH_MVEBU > default y > select OUTER_CACHE > help > diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile > index e8c7580df8ca..dfde39cdd992 100644 > --- a/arch/arm/plat-orion/Makefile > +++ b/arch/arm/plat-orion/Makefile > @@ -5,5 +5,5 @@ > ccflags-y := -I$(src)/include > > orion-gpio-$(CONFIG_GPIOLIB) += gpio.o > -obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o > +obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o mpp.o > obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) > diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c > deleted file mode 100644 > index cabe98386245..000000000000 > --- a/arch/arm/plat-orion/common.c > +++ /dev/null > @@ -1,826 +0,0 @@ > -/* > - * arch/arm/plat-orion/common.c > - * > - * Marvell Orion SoC common setup code used by multiple mach-/common.c > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - */ > - > -#include <linux/kernel.h> > -#include <linux/init.h> > -#include <linux/platform_device.h> > -#include <linux/dma-mapping.h> > -#include <linux/serial_8250.h> > -#include <linux/ata_platform.h> > -#include <linux/clk.h> > -#include <linux/clkdev.h> > -#include <linux/mv643xx_eth.h> > -#include <linux/mv643xx_i2c.h> > -#include <linux/platform_data/dma-mv_xor.h> > -#include <linux/platform_data/usb-ehci-orion.h> > -#include <plat/common.h> > -#include <linux/phy.h> > - > -/* Create a clkdev entry for a given device/clk */ > -void __init orion_clkdev_add(const char *con_id, const char *dev_id, > - struct clk *clk) > -{ > - clkdev_create(clk, con_id, "%s", dev_id); > -} > - > -/* Create clkdev entries for all orion platforms except kirkwood. > - Kirkwood has gated clocks for some of its peripherals, so creates > - its own clkdev entries. For all the other orion devices, create > - clkdev entries to the tclk. */ > -void __init orion_clkdev_init(struct clk *tclk) > -{ > - orion_clkdev_add(NULL, "orion_spi.0", tclk); > - orion_clkdev_add(NULL, "orion_spi.1", tclk); > - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", tclk); > - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", tclk); > - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".2", tclk); > - orion_clkdev_add(NULL, MV643XX_ETH_NAME ".3", tclk); > - orion_clkdev_add(NULL, "orion_wdt", tclk); > - orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", tclk); > -} > - > -/* Fill in the resources structure and link it into the platform > - device structure. There is always a memory region, and nearly > - always an interrupt.*/ > -static void fill_resources(struct platform_device *device, > - struct resource *resources, > - resource_size_t mapbase, > - resource_size_t size) > -{ > - device->resource = resources; > - device->num_resources = 1; > - resources[0].flags = IORESOURCE_MEM; > - resources[0].start = mapbase; > - resources[0].end = mapbase + size; > -} > - > -static void fill_resources_irq(struct platform_device *device, > - struct resource *resources, > - resource_size_t mapbase, > - resource_size_t size, > - unsigned int irq) > -{ > - fill_resources(device, resources, mapbase, size); > - > - device->num_resources++; > - resources[1].flags = IORESOURCE_IRQ; > - resources[1].start = irq; > - resources[1].end = irq; > -} > - > -/***************************************************************************** > - * UART > - ****************************************************************************/ > -static unsigned long __init uart_get_clk_rate(struct clk *clk) > -{ > - clk_prepare_enable(clk); > - return clk_get_rate(clk); > -} > - > -static void __init uart_complete( > - struct platform_device *orion_uart, > - struct plat_serial8250_port *data, > - struct resource *resources, > - void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk) > -{ > - data->mapbase = mapbase; > - data->membase = membase; > - data->irq = irq; > - data->uartclk = uart_get_clk_rate(clk); > - orion_uart->dev.platform_data = data; > - > - fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq); > - platform_device_register(orion_uart); > -} > - > -/***************************************************************************** > - * UART0 > - ****************************************************************************/ > -static struct plat_serial8250_port orion_uart0_data[] = { > - { > - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, > - .iotype = UPIO_MEM, > - .regshift = 2, > - }, { > - }, > -}; > - > -static struct resource orion_uart0_resources[2]; > - > -static struct platform_device orion_uart0 = { > - .name = "serial8250", > - .id = PLAT8250_DEV_PLATFORM, > -}; > - > -void __init orion_uart0_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk) > -{ > - uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources, > - membase, mapbase, irq, clk); > -} > - > -/***************************************************************************** > - * UART1 > - ****************************************************************************/ > -static struct plat_serial8250_port orion_uart1_data[] = { > - { > - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, > - .iotype = UPIO_MEM, > - .regshift = 2, > - }, { > - }, > -}; > - > -static struct resource orion_uart1_resources[2]; > - > -static struct platform_device orion_uart1 = { > - .name = "serial8250", > - .id = PLAT8250_DEV_PLATFORM1, > -}; > - > -void __init orion_uart1_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk) > -{ > - uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources, > - membase, mapbase, irq, clk); > -} > - > -/***************************************************************************** > - * UART2 > - ****************************************************************************/ > -static struct plat_serial8250_port orion_uart2_data[] = { > - { > - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, > - .iotype = UPIO_MEM, > - .regshift = 2, > - }, { > - }, > -}; > - > -static struct resource orion_uart2_resources[2]; > - > -static struct platform_device orion_uart2 = { > - .name = "serial8250", > - .id = PLAT8250_DEV_PLATFORM2, > -}; > - > -void __init orion_uart2_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk) > -{ > - uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources, > - membase, mapbase, irq, clk); > -} > - > -/***************************************************************************** > - * UART3 > - ****************************************************************************/ > -static struct plat_serial8250_port orion_uart3_data[] = { > - { > - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, > - .iotype = UPIO_MEM, > - .regshift = 2, > - }, { > - }, > -}; > - > -static struct resource orion_uart3_resources[2]; > - > -static struct platform_device orion_uart3 = { > - .name = "serial8250", > - .id = 3, > -}; > - > -void __init orion_uart3_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk) > -{ > - uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources, > - membase, mapbase, irq, clk); > -} > - > -/***************************************************************************** > - * SoC RTC > - ****************************************************************************/ > -static struct resource orion_rtc_resource[2]; > - > -void __init orion_rtc_init(unsigned long mapbase, > - unsigned long irq) > -{ > - orion_rtc_resource[0].start = mapbase; > - orion_rtc_resource[0].end = mapbase + SZ_32 - 1; > - orion_rtc_resource[0].flags = IORESOURCE_MEM; > - orion_rtc_resource[1].start = irq; > - orion_rtc_resource[1].end = irq; > - orion_rtc_resource[1].flags = IORESOURCE_IRQ; > - > - platform_device_register_simple("rtc-mv", -1, orion_rtc_resource, 2); > -} > - > -/***************************************************************************** > - * GE > - ****************************************************************************/ > -static __init void ge_complete( > - struct mv643xx_eth_shared_platform_data *orion_ge_shared_data, > - struct resource *orion_ge_resource, unsigned long irq, > - struct platform_device *orion_ge_shared, > - struct platform_device *orion_ge_mvmdio, > - struct mv643xx_eth_platform_data *eth_data, > - struct platform_device *orion_ge) > -{ > - orion_ge_resource->start = irq; > - orion_ge_resource->end = irq; > - eth_data->shared = orion_ge_shared; > - orion_ge->dev.platform_data = eth_data; > - > - platform_device_register(orion_ge_shared); > - if (orion_ge_mvmdio) > - platform_device_register(orion_ge_mvmdio); > - platform_device_register(orion_ge); > -} > - > -/***************************************************************************** > - * GE00 > - ****************************************************************************/ > -static struct mv643xx_eth_shared_platform_data orion_ge00_shared_data; > - > -static struct resource orion_ge00_shared_resources[] = { > - { > - .name = "ge00 base", > - }, > -}; > - > -static struct platform_device orion_ge00_shared = { > - .name = MV643XX_ETH_SHARED_NAME, > - .id = 0, > - .dev = { > - .platform_data = &orion_ge00_shared_data, > - }, > -}; > - > -static struct resource orion_ge_mvmdio_resources[] = { > - { > - .name = "ge00 mvmdio base", > - }, { > - .name = "ge00 mvmdio err irq", > - }, > -}; > - > -static struct platform_device orion_ge_mvmdio = { > - .name = "orion-mdio", > - .id = -1, > -}; > - > -static struct resource orion_ge00_resources[] = { > - { > - .name = "ge00 irq", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device orion_ge00 = { > - .name = MV643XX_ETH_NAME, > - .id = 0, > - .num_resources = 1, > - .resource = orion_ge00_resources, > - .dev = { > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > -}; > - > -void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq, > - unsigned long irq_err, > - unsigned int tx_csum_limit) > -{ > - fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, > - mapbase + 0x2000, SZ_16K - 1); > - fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources, > - mapbase + 0x2004, 0x84 - 1, irq_err); > - orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; > - ge_complete(&orion_ge00_shared_data, > - orion_ge00_resources, irq, &orion_ge00_shared, > - &orion_ge_mvmdio, > - eth_data, &orion_ge00); > -} > - > -/***************************************************************************** > - * GE01 > - ****************************************************************************/ > -static struct mv643xx_eth_shared_platform_data orion_ge01_shared_data; > - > -static struct resource orion_ge01_shared_resources[] = { > - { > - .name = "ge01 base", > - } > -}; > - > -static struct platform_device orion_ge01_shared = { > - .name = MV643XX_ETH_SHARED_NAME, > - .id = 1, > - .dev = { > - .platform_data = &orion_ge01_shared_data, > - }, > -}; > - > -static struct resource orion_ge01_resources[] = { > - { > - .name = "ge01 irq", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device orion_ge01 = { > - .name = MV643XX_ETH_NAME, > - .id = 1, > - .num_resources = 1, > - .resource = orion_ge01_resources, > - .dev = { > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > -}; > - > -void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq, > - unsigned int tx_csum_limit) > -{ > - fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, > - mapbase + 0x2000, SZ_16K - 1); > - orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; > - ge_complete(&orion_ge01_shared_data, > - orion_ge01_resources, irq, &orion_ge01_shared, > - NULL, > - eth_data, &orion_ge01); > -} > - > -/***************************************************************************** > - * GE10 > - ****************************************************************************/ > -static struct mv643xx_eth_shared_platform_data orion_ge10_shared_data; > - > -static struct resource orion_ge10_shared_resources[] = { > - { > - .name = "ge10 base", > - } > -}; > - > -static struct platform_device orion_ge10_shared = { > - .name = MV643XX_ETH_SHARED_NAME, > - .id = 2, > - .dev = { > - .platform_data = &orion_ge10_shared_data, > - }, > -}; > - > -static struct resource orion_ge10_resources[] = { > - { > - .name = "ge10 irq", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device orion_ge10 = { > - .name = MV643XX_ETH_NAME, > - .id = 2, > - .num_resources = 1, > - .resource = orion_ge10_resources, > - .dev = { > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > -}; > - > -void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq) > -{ > - fill_resources(&orion_ge10_shared, orion_ge10_shared_resources, > - mapbase + 0x2000, SZ_16K - 1); > - ge_complete(&orion_ge10_shared_data, > - orion_ge10_resources, irq, &orion_ge10_shared, > - NULL, > - eth_data, &orion_ge10); > -} > - > -/***************************************************************************** > - * GE11 > - ****************************************************************************/ > -static struct mv643xx_eth_shared_platform_data orion_ge11_shared_data; > - > -static struct resource orion_ge11_shared_resources[] = { > - { > - .name = "ge11 base", > - }, > -}; > - > -static struct platform_device orion_ge11_shared = { > - .name = MV643XX_ETH_SHARED_NAME, > - .id = 3, > - .dev = { > - .platform_data = &orion_ge11_shared_data, > - }, > -}; > - > -static struct resource orion_ge11_resources[] = { > - { > - .name = "ge11 irq", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct platform_device orion_ge11 = { > - .name = MV643XX_ETH_NAME, > - .id = 3, > - .num_resources = 1, > - .resource = orion_ge11_resources, > - .dev = { > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > -}; > - > -void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq) > -{ > - fill_resources(&orion_ge11_shared, orion_ge11_shared_resources, > - mapbase + 0x2000, SZ_16K - 1); > - ge_complete(&orion_ge11_shared_data, > - orion_ge11_resources, irq, &orion_ge11_shared, > - NULL, > - eth_data, &orion_ge11); > -} > - > -/***************************************************************************** > - * I2C > - ****************************************************************************/ > -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { > - .freq_n = 3, > - .timeout = 1000, /* Default timeout of 1 second */ > -}; > - > -static struct resource orion_i2c_resources[2]; > - > -static struct platform_device orion_i2c = { > - .name = MV64XXX_I2C_CTLR_NAME, > - .id = 0, > - .dev = { > - .platform_data = &orion_i2c_pdata, > - }, > -}; > - > -static struct mv64xxx_i2c_pdata orion_i2c_1_pdata = { > - .freq_n = 3, > - .timeout = 1000, /* Default timeout of 1 second */ > -}; > - > -static struct resource orion_i2c_1_resources[2]; > - > -static struct platform_device orion_i2c_1 = { > - .name = MV64XXX_I2C_CTLR_NAME, > - .id = 1, > - .dev = { > - .platform_data = &orion_i2c_1_pdata, > - }, > -}; > - > -void __init orion_i2c_init(unsigned long mapbase, > - unsigned long irq, > - unsigned long freq_m) > -{ > - orion_i2c_pdata.freq_m = freq_m; > - fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase, > - SZ_32 - 1, irq); > - platform_device_register(&orion_i2c); > -} > - > -void __init orion_i2c_1_init(unsigned long mapbase, > - unsigned long irq, > - unsigned long freq_m) > -{ > - orion_i2c_1_pdata.freq_m = freq_m; > - fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase, > - SZ_32 - 1, irq); > - platform_device_register(&orion_i2c_1); > -} > - > -/***************************************************************************** > - * SPI > - ****************************************************************************/ > -static struct resource orion_spi_resources; > - > -static struct platform_device orion_spi = { > - .name = "orion_spi", > - .id = 0, > -}; > - > -static struct resource orion_spi_1_resources; > - > -static struct platform_device orion_spi_1 = { > - .name = "orion_spi", > - .id = 1, > -}; > - > -/* Note: The SPI silicon core does have interrupts. However the > - * current Linux software driver does not use interrupts. */ > - > -void __init orion_spi_init(unsigned long mapbase) > -{ > - fill_resources(&orion_spi, &orion_spi_resources, > - mapbase, SZ_512 - 1); > - platform_device_register(&orion_spi); > -} > - > -void __init orion_spi_1_init(unsigned long mapbase) > -{ > - fill_resources(&orion_spi_1, &orion_spi_1_resources, > - mapbase, SZ_512 - 1); > - platform_device_register(&orion_spi_1); > -} > - > -/***************************************************************************** > - * XOR > - ****************************************************************************/ > -static u64 orion_xor_dmamask = DMA_BIT_MASK(32); > - > -/***************************************************************************** > - * XOR0 > - ****************************************************************************/ > -static struct resource orion_xor0_shared_resources[] = { > - { > - .name = "xor 0 low", > - .flags = IORESOURCE_MEM, > - }, { > - .name = "xor 0 high", > - .flags = IORESOURCE_MEM, > - }, { > - .name = "irq channel 0", > - .flags = IORESOURCE_IRQ, > - }, { > - .name = "irq channel 1", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct mv_xor_channel_data orion_xor0_channels_data[2]; > - > -static struct mv_xor_platform_data orion_xor0_pdata = { > - .channels = orion_xor0_channels_data, > -}; > - > -static struct platform_device orion_xor0_shared = { > - .name = MV_XOR_NAME, > - .id = 0, > - .num_resources = ARRAY_SIZE(orion_xor0_shared_resources), > - .resource = orion_xor0_shared_resources, > - .dev = { > - .dma_mask = &orion_xor_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &orion_xor0_pdata, > - }, > -}; > - > -void __init orion_xor0_init(unsigned long mapbase_low, > - unsigned long mapbase_high, > - unsigned long irq_0, > - unsigned long irq_1) > -{ > - orion_xor0_shared_resources[0].start = mapbase_low; > - orion_xor0_shared_resources[0].end = mapbase_low + 0xff; > - orion_xor0_shared_resources[1].start = mapbase_high; > - orion_xor0_shared_resources[1].end = mapbase_high + 0xff; > - > - orion_xor0_shared_resources[2].start = irq_0; > - orion_xor0_shared_resources[2].end = irq_0; > - orion_xor0_shared_resources[3].start = irq_1; > - orion_xor0_shared_resources[3].end = irq_1; > - > - dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[0].cap_mask); > - dma_cap_set(DMA_XOR, orion_xor0_channels_data[0].cap_mask); > - > - dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[1].cap_mask); > - dma_cap_set(DMA_XOR, orion_xor0_channels_data[1].cap_mask); > - > - platform_device_register(&orion_xor0_shared); > -} > - > -/***************************************************************************** > - * XOR1 > - ****************************************************************************/ > -static struct resource orion_xor1_shared_resources[] = { > - { > - .name = "xor 1 low", > - .flags = IORESOURCE_MEM, > - }, { > - .name = "xor 1 high", > - .flags = IORESOURCE_MEM, > - }, { > - .name = "irq channel 0", > - .flags = IORESOURCE_IRQ, > - }, { > - .name = "irq channel 1", > - .flags = IORESOURCE_IRQ, > - }, > -}; > - > -static struct mv_xor_channel_data orion_xor1_channels_data[2]; > - > -static struct mv_xor_platform_data orion_xor1_pdata = { > - .channels = orion_xor1_channels_data, > -}; > - > -static struct platform_device orion_xor1_shared = { > - .name = MV_XOR_NAME, > - .id = 1, > - .num_resources = ARRAY_SIZE(orion_xor1_shared_resources), > - .resource = orion_xor1_shared_resources, > - .dev = { > - .dma_mask = &orion_xor_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &orion_xor1_pdata, > - }, > -}; > - > -void __init orion_xor1_init(unsigned long mapbase_low, > - unsigned long mapbase_high, > - unsigned long irq_0, > - unsigned long irq_1) > -{ > - orion_xor1_shared_resources[0].start = mapbase_low; > - orion_xor1_shared_resources[0].end = mapbase_low + 0xff; > - orion_xor1_shared_resources[1].start = mapbase_high; > - orion_xor1_shared_resources[1].end = mapbase_high + 0xff; > - > - orion_xor1_shared_resources[2].start = irq_0; > - orion_xor1_shared_resources[2].end = irq_0; > - orion_xor1_shared_resources[3].start = irq_1; > - orion_xor1_shared_resources[3].end = irq_1; > - > - dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[0].cap_mask); > - dma_cap_set(DMA_XOR, orion_xor1_channels_data[0].cap_mask); > - > - dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[1].cap_mask); > - dma_cap_set(DMA_XOR, orion_xor1_channels_data[1].cap_mask); > - > - platform_device_register(&orion_xor1_shared); > -} > - > -/***************************************************************************** > - * EHCI > - ****************************************************************************/ > -static struct orion_ehci_data orion_ehci_data; > -static u64 ehci_dmamask = DMA_BIT_MASK(32); > - > - > -/***************************************************************************** > - * EHCI0 > - ****************************************************************************/ > -static struct resource orion_ehci_resources[2]; > - > -static struct platform_device orion_ehci = { > - .name = "orion-ehci", > - .id = 0, > - .dev = { > - .dma_mask = &ehci_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &orion_ehci_data, > - }, > -}; > - > -void __init orion_ehci_init(unsigned long mapbase, > - unsigned long irq, > - enum orion_ehci_phy_ver phy_version) > -{ > - orion_ehci_data.phy_version = phy_version; > - fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1, > - irq); > - > - platform_device_register(&orion_ehci); > -} > - > -/***************************************************************************** > - * EHCI1 > - ****************************************************************************/ > -static struct resource orion_ehci_1_resources[2]; > - > -static struct platform_device orion_ehci_1 = { > - .name = "orion-ehci", > - .id = 1, > - .dev = { > - .dma_mask = &ehci_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &orion_ehci_data, > - }, > -}; > - > -void __init orion_ehci_1_init(unsigned long mapbase, > - unsigned long irq) > -{ > - fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources, > - mapbase, SZ_4K - 1, irq); > - > - platform_device_register(&orion_ehci_1); > -} > - > -/***************************************************************************** > - * EHCI2 > - ****************************************************************************/ > -static struct resource orion_ehci_2_resources[2]; > - > -static struct platform_device orion_ehci_2 = { > - .name = "orion-ehci", > - .id = 2, > - .dev = { > - .dma_mask = &ehci_dmamask, > - .coherent_dma_mask = DMA_BIT_MASK(32), > - .platform_data = &orion_ehci_data, > - }, > -}; > - > -void __init orion_ehci_2_init(unsigned long mapbase, > - unsigned long irq) > -{ > - fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources, > - mapbase, SZ_4K - 1, irq); > - > - platform_device_register(&orion_ehci_2); > -} > - > -/***************************************************************************** > - * SATA > - ****************************************************************************/ > -static struct resource orion_sata_resources[2] = { > - { > - .name = "sata base", > - }, { > - .name = "sata irq", > - }, > -}; > - > -static struct platform_device orion_sata = { > - .name = "sata_mv", > - .id = 0, > - .dev = { > - .coherent_dma_mask = DMA_BIT_MASK(32), > - }, > -}; > - > -void __init orion_sata_init(struct mv_sata_platform_data *sata_data, > - unsigned long mapbase, > - unsigned long irq) > -{ > - orion_sata.dev.platform_data = sata_data; > - fill_resources_irq(&orion_sata, orion_sata_resources, > - mapbase, 0x5000 - 1, irq); > - > - platform_device_register(&orion_sata); > -} > - > -/***************************************************************************** > - * Cryptographic Engines and Security Accelerator (CESA) > - ****************************************************************************/ > -static struct resource orion_crypto_resources[] = { > - { > - .name = "regs", > - }, { > - .name = "crypto interrupt", > - }, { > - .name = "sram", > - .flags = IORESOURCE_MEM, > - }, > -}; > - > -static struct platform_device orion_crypto = { > - .name = "mv_crypto", > - .id = -1, > -}; > - > -void __init orion_crypto_init(unsigned long mapbase, > - unsigned long srambase, > - unsigned long sram_size, > - unsigned long irq) > -{ > - fill_resources_irq(&orion_crypto, orion_crypto_resources, > - mapbase, 0xffff, irq); > - orion_crypto.num_resources = 3; > - orion_crypto_resources[2].start = srambase; > - orion_crypto_resources[2].end = srambase + sram_size - 1; > - > - platform_device_register(&orion_crypto); > -} > diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h > deleted file mode 100644 > index b76c06569fe5..000000000000 > --- a/arch/arm/plat-orion/include/plat/addr-map.h > +++ /dev/null > @@ -1,54 +0,0 @@ > -/* > - * arch/arm/plat-orion/include/plat/addr-map.h > - * > - * Marvell Orion SoC address map handling. > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - */ > - > -#ifndef __PLAT_ADDR_MAP_H > -#define __PLAT_ADDR_MAP_H > - > -extern struct mbus_dram_target_info orion_mbus_dram_info; > - > -struct orion_addr_map_cfg { > - const int num_wins; /* Total number of windows */ > - const int remappable_wins; > - void __iomem *bridge_virt_base; > - int hw_io_coherency; > - > - /* If NULL, the default cpu_win_can_remap will be used, using > - the value in remappable_wins */ > - int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg, > - const int win); > - /* If NULL, the default win_cfg_base will be used, using the > - value in bridge_virt_base */ > - void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg, > - const int win); > -}; > - > -/* > - * Information needed to setup one address mapping. > - */ > -struct orion_addr_map_info { > - const int win; > - const u32 base; > - const u32 size; > - const u8 target; > - const u8 attr; > - const int remap; > -}; > - > -void __init orion_config_wins(struct orion_addr_map_cfg *cfg, > - const struct orion_addr_map_info *info); > - > -void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, > - const int win, const u32 base, > - const u32 size, const u8 target, > - const u8 attr, const int remap); > - > -void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, > - const void __iomem *ddr_window_cpu_base); > -#endif > diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h > deleted file mode 100644 > index d2aad95d20cb..000000000000 > --- a/arch/arm/plat-orion/include/plat/common.h > +++ /dev/null > @@ -1,104 +0,0 @@ > -/* > - * arch/arm/plat-orion/include/plat/common.h > - * > - * Marvell Orion SoC common setup code used by different mach-/common.c > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - */ > - > -#ifndef __PLAT_COMMON_H > -#include <linux/mv643xx_eth.h> > -#include <linux/platform_data/usb-ehci-orion.h> > - > -struct mv_sata_platform_data; > - > -void __init orion_uart0_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk); > - > -void __init orion_uart1_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk); > - > -void __init orion_uart2_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk); > - > -void __init orion_uart3_init(void __iomem *membase, > - resource_size_t mapbase, > - unsigned int irq, > - struct clk *clk); > - > -void __init orion_rtc_init(unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq, > - unsigned long irq_err, > - unsigned int tx_csum_limit); > - > -void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq, > - unsigned int tx_csum_limit); > - > -void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, > - unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_i2c_init(unsigned long mapbase, > - unsigned long irq, > - unsigned long freq_m); > - > -void __init orion_i2c_1_init(unsigned long mapbase, > - unsigned long irq, > - unsigned long freq_m); > - > -void __init orion_spi_init(unsigned long mapbase); > - > -void __init orion_spi_1_init(unsigned long mapbase); > - > -void __init orion_xor0_init(unsigned long mapbase_low, > - unsigned long mapbase_high, > - unsigned long irq_0, > - unsigned long irq_1); > - > -void __init orion_xor1_init(unsigned long mapbase_low, > - unsigned long mapbase_high, > - unsigned long irq_0, > - unsigned long irq_1); > - > -void __init orion_ehci_init(unsigned long mapbase, > - unsigned long irq, > - enum orion_ehci_phy_ver phy_version); > - > -void __init orion_ehci_1_init(unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_ehci_2_init(unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_sata_init(struct mv_sata_platform_data *sata_data, > - unsigned long mapbase, > - unsigned long irq); > - > -void __init orion_crypto_init(unsigned long mapbase, > - unsigned long srambase, > - unsigned long sram_size, > - unsigned long irq); > - > -void __init orion_clkdev_add(const char *con_id, const char *dev_id, > - struct clk *clk); > - > -void __init orion_clkdev_init(struct clk *tclk); > -#endif > diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h > deleted file mode 100644 > index 07527e417c62..000000000000 > --- a/arch/arm/plat-orion/include/plat/time.h > +++ /dev/null > @@ -1,20 +0,0 @@ > -/* > - * arch/arm/plat-orion/include/plat/time.h > - * > - * Marvell Orion SoC time handling. > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - */ > - > -#ifndef __PLAT_TIME_H > -#define __PLAT_TIME_H > - > -void orion_time_set_base(void __iomem *timer_base); > - > -void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask, > - unsigned int irq, unsigned int tclk); > - > - > -#endif > diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c > index 8b8c06d2e9c4..e817f20409c4 100644 > --- a/arch/arm/plat-orion/pcie.c > +++ b/arch/arm/plat-orion/pcie.c > @@ -13,7 +13,6 @@ > #include <linux/mbus.h> > #include <asm/mach/pci.h> > #include <plat/pcie.h> > -#include <plat/addr-map.h> > #include <linux/delay.h> > > /* > diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c > deleted file mode 100644 > index 509d4824dc1c..000000000000 > --- a/arch/arm/plat-orion/time.c > +++ /dev/null > @@ -1,238 +0,0 @@ > -/* > - * arch/arm/plat-orion/time.c > - * > - * Marvell Orion SoC timer handling. > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - * > - * Timer 0 is used as free-running clocksource, while timer 1 is > - * used as clock_event_device. > - */ > - > -#include <linux/kernel.h> > -#include <linux/timer.h> > -#include <linux/clockchips.h> > -#include <linux/interrupt.h> > -#include <linux/irq.h> > -#include <linux/sched_clock.h> > -#include <plat/time.h> > -#include <asm/delay.h> > - > -/* > - * MBus bridge block registers. > - */ > -#define BRIDGE_CAUSE_OFF 0x0110 > -#define BRIDGE_MASK_OFF 0x0114 > -#define BRIDGE_INT_TIMER0 0x0002 > -#define BRIDGE_INT_TIMER1 0x0004 > - > - > -/* > - * Timer block registers. > - */ > -#define TIMER_CTRL_OFF 0x0000 > -#define TIMER0_EN 0x0001 > -#define TIMER0_RELOAD_EN 0x0002 > -#define TIMER1_EN 0x0004 > -#define TIMER1_RELOAD_EN 0x0008 > -#define TIMER0_RELOAD_OFF 0x0010 > -#define TIMER0_VAL_OFF 0x0014 > -#define TIMER1_RELOAD_OFF 0x0018 > -#define TIMER1_VAL_OFF 0x001c > - > - > -/* > - * SoC-specific data. > - */ > -static void __iomem *bridge_base; > -static u32 bridge_timer1_clr_mask; > -static void __iomem *timer_base; > - > - > -/* > - * Number of timer ticks per jiffy. > - */ > -static u32 ticks_per_jiffy; > - > - > -/* > - * Orion's sched_clock implementation. It has a resolution of > - * at least 7.5ns (133MHz TCLK). > - */ > - > -static u64 notrace orion_read_sched_clock(void) > -{ > - return ~readl(timer_base + TIMER0_VAL_OFF); > -} > - > -/* > - * Clockevent handling. > - */ > -static int > -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) > -{ > - unsigned long flags; > - u32 u; > - > - if (delta == 0) > - return -ETIME; > - > - local_irq_save(flags); > - > - /* > - * Clear and enable clockevent timer interrupt. > - */ > - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); > - > - u = readl(bridge_base + BRIDGE_MASK_OFF); > - u |= BRIDGE_INT_TIMER1; > - writel(u, bridge_base + BRIDGE_MASK_OFF); > - > - /* > - * Setup new clockevent timer value. > - */ > - writel(delta, timer_base + TIMER1_VAL_OFF); > - > - /* > - * Enable the timer. > - */ > - u = readl(timer_base + TIMER_CTRL_OFF); > - u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; > - writel(u, timer_base + TIMER_CTRL_OFF); > - > - local_irq_restore(flags); > - > - return 0; > -} > - > -static int orion_clkevt_shutdown(struct clock_event_device *evt) > -{ > - unsigned long flags; > - u32 u; > - > - local_irq_save(flags); > - > - /* Disable timer */ > - u = readl(timer_base + TIMER_CTRL_OFF); > - writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF); > - > - /* Disable timer interrupt */ > - u = readl(bridge_base + BRIDGE_MASK_OFF); > - writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); > - > - /* ACK pending timer interrupt */ > - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); > - > - local_irq_restore(flags); > - > - return 0; > -} > - > -static int orion_clkevt_set_periodic(struct clock_event_device *evt) > -{ > - unsigned long flags; > - u32 u; > - > - local_irq_save(flags); > - > - /* Setup timer to fire at 1/HZ intervals */ > - writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF); > - writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF); > - > - /* Enable timer interrupt */ > - u = readl(bridge_base + BRIDGE_MASK_OFF); > - writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF); > - > - /* Enable timer */ > - u = readl(timer_base + TIMER_CTRL_OFF); > - writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF); > - > - local_irq_restore(flags); > - > - return 0; > -} > - > -static struct clock_event_device orion_clkevt = { > - .name = "orion_tick", > - .features = CLOCK_EVT_FEAT_ONESHOT | > - CLOCK_EVT_FEAT_PERIODIC, > - .rating = 300, > - .set_next_event = orion_clkevt_next_event, > - .set_state_shutdown = orion_clkevt_shutdown, > - .set_state_periodic = orion_clkevt_set_periodic, > - .set_state_oneshot = orion_clkevt_shutdown, > - .tick_resume = orion_clkevt_shutdown, > -}; > - > -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) > -{ > - /* > - * ACK timer interrupt and call event handler. > - */ > - writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF); > - orion_clkevt.event_handler(&orion_clkevt); > - > - return IRQ_HANDLED; > -} > - > -void __init > -orion_time_set_base(void __iomem *_timer_base) > -{ > - timer_base = _timer_base; > -} > - > -static unsigned long orion_delay_timer_read(void) > -{ > - return ~readl(timer_base + TIMER0_VAL_OFF); > -} > - > -static struct delay_timer orion_delay_timer = { > - .read_current_timer = orion_delay_timer_read, > -}; > - > -void __init > -orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, > - unsigned int irq, unsigned int tclk) > -{ > - u32 u; > - > - /* > - * Set SoC-specific data. > - */ > - bridge_base = _bridge_base; > - bridge_timer1_clr_mask = _bridge_timer1_clr_mask; > - > - ticks_per_jiffy = (tclk + HZ/2) / HZ; > - > - orion_delay_timer.freq = tclk; > - register_current_timer_delay(&orion_delay_timer); > - > - /* > - * Set scale and timer for sched_clock. > - */ > - sched_clock_register(orion_read_sched_clock, 32, tclk); > - > - /* > - * Setup free-running clocksource timer (interrupts > - * disabled). > - */ > - writel(0xffffffff, timer_base + TIMER0_VAL_OFF); > - writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); > - u = readl(bridge_base + BRIDGE_MASK_OFF); > - writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF); > - u = readl(timer_base + TIMER_CTRL_OFF); > - writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF); > - clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource", > - tclk, 300, 32, clocksource_mmio_readl_down); > - > - /* > - * Setup clockevent timer (interrupt-driven). > - */ > - if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick", > - NULL)) > - pr_err("Failed to request irq %u (orion_tick)\n", irq); > - orion_clkevt.cpumask = cpumask_of(0); > - clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe); > -} > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index 28ca856ecc75..434cce3efd96 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -471,8 +471,7 @@ config SATA_HIGHBANK > > config SATA_MV > tristate "Marvell SATA support" > - depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ > - ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST > + depends on PCI || ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST > select GENERIC_PHY > select SATA_HOST > help > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 4f060d3e5636..d06903635335 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -330,7 +330,7 @@ config MMC_SDHCI_ESDHC_IMX > > config MMC_SDHCI_DOVE > tristate "SDHCI support on Marvell's Dove SoC" > - depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST > + depends on MACH_DOVE || COMPILE_TEST > depends on MMC_SDHCI_PLTFM > select MMC_SDHCI_IO_ACCESSORS > help > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig > index d246bbe37948..7e550c474b7a 100644 > --- a/drivers/pci/controller/Kconfig > +++ b/drivers/pci/controller/Kconfig > @@ -197,7 +197,7 @@ config PCI_LOONGSON > > config PCI_MVEBU > tristate "Marvell EBU PCIe controller" > - depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST > + depends on ARCH_MVEBU || COMPILE_TEST > depends on MVEBU_MBUS > depends on ARM > depends on OF > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig > index bccd72dccb77..c29d2d28ae55 100644 > --- a/drivers/phy/marvell/Kconfig > +++ b/drivers/phy/marvell/Kconfig > @@ -77,7 +77,7 @@ config PHY_MVEBU_CP110_UTMI > > config PHY_MVEBU_SATA > def_bool y > - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > + depends on MACH_DOVE || MACH_KIRKWOOD > depends on OF > select GENERIC_PHY > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > index 55ffee3d75ce..5cb6cdfe6015 100644 > --- a/drivers/rtc/Kconfig > +++ b/drivers/rtc/Kconfig > @@ -1703,7 +1703,7 @@ config RTC_DRV_STARFIRE > > config RTC_DRV_MV > tristate "Marvell SoC RTC" > - depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST > + depends on ARCH_MVEBU || COMPILE_TEST > help > If you say yes here you will get support for the in-chip RTC > that can be found in some of Marvell's SoC devices, such as > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile > index c9e689080ceb..6411b96d584c 100644 > --- a/drivers/soc/Makefile > +++ b/drivers/soc/Makefile > @@ -9,7 +9,6 @@ obj-$(CONFIG_ARCH_AT91) += atmel/ > obj-y += bcm/ > obj-$(CONFIG_ARCH_CANAAN) += canaan/ > obj-$(CONFIG_EP93XX_SOC) += cirrus/ > -obj-$(CONFIG_ARCH_DOVE) += dove/ > obj-$(CONFIG_MACH_DOVE) += dove/ > obj-y += fsl/ > obj-y += fujitsu/ > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 810eeccedfba..8cef9b658191 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -391,7 +391,7 @@ config KIRKWOOD_THERMAL > > config DOVE_THERMAL > tristate "Temperature sensor on Marvell Dove SoCs" > - depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST > + depends on MACH_DOVE || COMPILE_TEST > depends on HAS_IOMEM > depends on OF > help > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 0ab0dcc6d27d..d83bfb189705 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -690,7 +690,7 @@ config K3_RTI_WATCHDOG > > config ORION_WATCHDOG > tristate "Orion watchdog" > - depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST > + depends on ARCH_ORION5X || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST > depends on ARM > select WATCHDOG_CORE > help > diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig > index 924072e402c8..d59c5bb0b391 100644 > --- a/sound/soc/kirkwood/Kconfig > +++ b/sound/soc/kirkwood/Kconfig > @@ -3,7 +3,7 @@ menu "Kirkwood" > > config SND_KIRKWOOD_SOC > tristate "SoC Audio for the Marvell Kirkwood and Dove chips" > - depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST > + depends on ARCH_MVEBU || COMPILE_TEST > help > Say Y or M if you want to add support for codecs attached to > the Kirkwood I2S interface. You will also need to select the > -- > 2.53.0 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann 2026-09-08 15:34 ` Mark Brown 2026-09-08 16:12 ` Ulf Hansson @ 2026-09-08 16:18 ` Andrew Lunn 2026-09-08 16:28 ` Guenter Roeck ` (4 subsequent siblings) 7 siblings, 0 replies; 9+ messages in thread From: Andrew Lunn @ 2026-09-08 16:18 UTC (permalink / raw) To: Arnd Bergmann Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On Tue, Sep 08, 2026 at 05:27:55PM +0200, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann ` (2 preceding siblings ...) 2026-09-08 16:18 ` Andrew Lunn @ 2026-09-08 16:28 ` Guenter Roeck 2026-09-08 17:33 ` Linus Walleij ` (3 subsequent siblings) 7 siblings, 0 replies; 9+ messages in thread From: Guenter Roeck @ 2026-09-08 16:28 UTC (permalink / raw) To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King Cc: Arnd Bergmann, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On 9/8/26 08:27, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Gregory Clement <gregory.clement@bootlin.com> > Cc: Alexander Clouter <alex@digriz.org.uk> > Cc: Jeremy J. Peper <jeremy@jeremypeper.com> > Cc: Damien Le Moal <dlemoal@kernel.org> > Cc: Niklas Cassel <cassel@kernel.org> > Cc: Ulf Hansson <ulfh@kernel.org> > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> > Cc: Manivannan Sadhasivam <mani@kernel.org> > Cc: Rob Herring <robh@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@kernel.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Mark Brown <broonie@kernel.org> > Cc: Linus Walleij <linusw@kernel.org> > Cc: Bartosz Golaszewski <brgl@kernel.org> > Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> > Cc: linux-ide@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-rtc@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-watchdog@vger.kernel.org > Cc: linux-sound@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann ` (3 preceding siblings ...) 2026-09-08 16:28 ` Guenter Roeck @ 2026-09-08 17:33 ` Linus Walleij 2026-09-08 20:14 ` Niklas Cassel ` (2 subsequent siblings) 7 siblings, 0 replies; 9+ messages in thread From: Linus Walleij @ 2026-09-08 17:33 UTC (permalink / raw) To: Arnd Bergmann Cc: Krzysztof Kozlowski, Alexandre Belloni, Russell King, Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On Tue, Sep 8, 2026 at 5:29 PM Arnd Bergmann <arnd@kernel.org> wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Gregory Clement <gregory.clement@bootlin.com> > Cc: Alexander Clouter <alex@digriz.org.uk> > Cc: Jeremy J. Peper <jeremy@jeremypeper.com> > Cc: Damien Le Moal <dlemoal@kernel.org> > Cc: Niklas Cassel <cassel@kernel.org> > Cc: Ulf Hansson <ulfh@kernel.org> > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> > Cc: Manivannan Sadhasivam <mani@kernel.org> > Cc: Rob Herring <robh@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@kernel.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Mark Brown <broonie@kernel.org> > Cc: Linus Walleij <linusw@kernel.org> > Cc: Bartosz Golaszewski <brgl@kernel.org> > Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> > Cc: linux-ide@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-rtc@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-watchdog@vger.kernel.org > Cc: linux-sound@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linusw@kernel.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann ` (4 preceding siblings ...) 2026-09-08 17:33 ` Linus Walleij @ 2026-09-08 20:14 ` Niklas Cassel 2026-09-09 12:54 ` Gregory CLEMENT 2026-09-11 10:22 ` Daniel Lezcano 7 siblings, 0 replies; 9+ messages in thread From: Niklas Cassel @ 2026-09-08 20:14 UTC (permalink / raw) To: Arnd Bergmann Cc: Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King, Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On Tue, Sep 08, 2026 at 05:27:55PM +0200, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Gregory Clement <gregory.clement@bootlin.com> > Cc: Alexander Clouter <alex@digriz.org.uk> > Cc: Jeremy J. Peper <jeremy@jeremypeper.com> > Cc: Damien Le Moal <dlemoal@kernel.org> > Cc: Niklas Cassel <cassel@kernel.org> > Cc: Ulf Hansson <ulfh@kernel.org> > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> > Cc: Manivannan Sadhasivam <mani@kernel.org> > Cc: Rob Herring <robh@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@kernel.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Mark Brown <broonie@kernel.org> > Cc: Linus Walleij <linusw@kernel.org> > Cc: Bartosz Golaszewski <brgl@kernel.org> > Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> > Cc: linux-ide@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-rtc@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-watchdog@vger.kernel.org > Cc: linux-sound@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Niklas Cassel <cassel@kernel.org> # ata parts ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann ` (5 preceding siblings ...) 2026-09-08 20:14 ` Niklas Cassel @ 2026-09-09 12:54 ` Gregory CLEMENT 2026-09-11 10:22 ` Daniel Lezcano 7 siblings, 0 replies; 9+ messages in thread From: Gregory CLEMENT @ 2026-09-09 12:54 UTC (permalink / raw) To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio Arnd Bergmann <arnd@kernel.org> writes: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Thanks, Gregory -- Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files 2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann ` (6 preceding siblings ...) 2026-09-09 12:54 ` Gregory CLEMENT @ 2026-09-11 10:22 ` Daniel Lezcano 7 siblings, 0 replies; 9+ messages in thread From: Daniel Lezcano @ 2026-09-11 10:22 UTC (permalink / raw) To: Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Russell King Cc: Drew Fustini, Arnd Bergmann, Rob Herring, Conor Dooley, Liviu Dudau, Sudeep Holla, Lorenzo Pieralisi, Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Vladimir Zapolskiy, Stefan Agner, Maxime Coquelin, Alexandre Torgue, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Nicolas Ferre, Claudiu Beznea, Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Robert Jarzmik, Kristoffer Ericson, Ethan Nelson-Moore, Geert Uytterhoeven, Alexander Sverdlin, Shawn Guo, Karl Mehltretter, David Hildenbrand (Arm), Nicolas Pitre, linux-doc, linux-kernel, linux-arm-kernel, devicetree, imx, linux-stm32, linux-omap, Alexander Clouter, Jeremy J. Peper, Damien Le Moal, Niklas Cassel, Ulf Hansson, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Vinod Koul, Rafael J. Wysocki, Daniel Lezcano, Guenter Roeck, Mark Brown, Bartosz Golaszewski, Thomas Weissschuh, linux-ide, linux-mmc, linux-pci, linux-phy, linux-rtc, linux-pm, linux-watchdog, linux-sound, linux-gpio On 9/8/26 17:27, Arnd Bergmann wrote: > From: Arnd Bergmann <arnd@arndb.de> > > The 'orion' platform is the predecessor to what linux now calls the > 'mvebu' line of Marvell SoCs, and originally covered orion5x, > mv78xx0, kirkwood, dove and a few others that do not have any > upstream support at the moment. > > Only a few board files remain here, these are the ones left > in 2022 board file purge because they had some level of support > in Debian or OpenWRT, mostly for commercial NAS or router boxes. > This distro support is now gone, and nobody has converted the > board files to devicetree, though the orion5x and dove platforms > also come with devicetree support for some other machines. > > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Gregory Clement <gregory.clement@bootlin.com> > Cc: Alexander Clouter <alex@digriz.org.uk> > Cc: Jeremy J. Peper <jeremy@jeremypeper.com> > Cc: Damien Le Moal <dlemoal@kernel.org> > Cc: Niklas Cassel <cassel@kernel.org> > Cc: Ulf Hansson <ulfh@kernel.org> > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org> > Cc: Manivannan Sadhasivam <mani@kernel.org> > Cc: Rob Herring <robh@kernel.org> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Daniel Lezcano <daniel.lezcano@kernel.org> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Mark Brown <broonie@kernel.org> > Cc: Linus Walleij <linusw@kernel.org> > Cc: Bartosz Golaszewski <brgl@kernel.org> > Cc: Thomas Weissschuh <thomas.weissschuh@linutronix.de> > Cc: linux-ide@vger.kernel.org > Cc: linux-mmc@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-rtc@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: linux-watchdog@vger.kernel.org > Cc: linux-sound@vger.kernel.org > Cc: linux-gpio@vger.kernel.org > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com> # thermal ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2026-09-11 10:22 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20260908152808.3928630-1-arnd@kernel.org>
2026-09-08 15:27 ` [PATCH 05/13] ARM: orion/dove/mv78xx0: remove all board files Arnd Bergmann
2026-09-08 15:34 ` Mark Brown
2026-09-08 16:12 ` Ulf Hansson
2026-09-08 16:18 ` Andrew Lunn
2026-09-08 16:28 ` Guenter Roeck
2026-09-08 17:33 ` Linus Walleij
2026-09-08 20:14 ` Niklas Cassel
2026-09-09 12:54 ` Gregory CLEMENT
2026-09-11 10:22 ` Daniel Lezcano
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox