From: Kailang <kailang@realtek.com>
To: Dean Matthew Menezes <dean.menezes@utexas.edu>,
Takashi Iwai <tiwai@suse.de>
Cc: "stable@vger.kernel.org" <stable@vger.kernel.org>,
"regressions@lists.linux.dev" <regressions@lists.linux.dev>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Linux Sound System <linux-sound@vger.kernel.org>,
Greg KH <gregkh@linuxfoundation.org>
Subject: RE: No sound on speakers X1 Carbon Gen 12
Date: Fri, 8 Nov 2024 02:58:33 +0000 [thread overview]
Message-ID: <f42f84204f8d413ea79f13f9c1d745d9@realtek.com> (raw)
In-Reply-To: <CAEkK70RAek2Y-syVt3S+3Q-kiriO24e8qQGDTrqC-Xt4kHzbCA@mail.gmail.com>
Hi Dean,
I check issues with our site machine.
I guess your BIOS didn't update to newer version.
If BIOS no update, you need to add below patch.
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 74ca0bb6c091..126b68140e7e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7450,7 +7450,6 @@ static void alc287_alc1318_playback_pcm_hook(struct hda_pcm_stream *hinfo,
struct snd_pcm_substream *substream,
int action)
{
- alc_write_coef_idx(codec, 0x10, 0x8806); /* Change MLK to GPIO3 */
switch (action) {
case HDA_GEN_PCM_ACT_OPEN:
alc_write_coefex_idx(codec, 0x5a, 0x00, 0x954f); /* write gpio3 to high */
@@ -7464,7 +7463,6 @@ static void alc287_alc1318_playback_pcm_hook(struct hda_pcm_stream *hinfo,
static void alc287_s4_power_gpio3_default(struct hda_codec *codec)
{
if (is_s4_suspend(codec)) {
- alc_write_coef_idx(codec, 0x10, 0x8806); /* Change MLK to GPIO3 */
alc_write_coefex_idx(codec, 0x5a, 0x00, 0x554f); /* write gpio3 as default value */
}
}
@@ -7473,9 +7471,17 @@ static void alc287_fixup_lenovo_thinkpad_with_alc1318(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
struct alc_spec *spec = codec->spec;
+ static const struct coef_fw coefs[] = {
+ WRITE_COEF(0x24, 0x0013), WRITE_COEF(0x25, 0x0000), WRITE_COEF(0x26, 0xC300),
+ WRITE_COEF(0x28, 0x0001), WRITE_COEF(0x29, 0xb023),
+ WRITE_COEF(0x24, 0x0013), WRITE_COEF(0x25, 0x0000), WRITE_COEF(0x26, 0xC301),
+ WRITE_COEF(0x28, 0x0001), WRITE_COEF(0x29, 0xb023),
+ };
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
+ alc_update_coef_idx(codec, 0x10, 1<<11, 1<<11);
+ alc_process_coef_fw(codec, coefs);
spec->power_hook = alc287_s4_power_gpio3_default;
spec->gen.pcm_playback_hook = alc287_alc1318_playback_pcm_hook;
}
> -----Original Message-----
> From: Dean Matthew Menezes <dean.menezes@utexas.edu>
> Sent: Saturday, October 26, 2024 8:23 AM
> To: Takashi Iwai <tiwai@suse.de>
> Cc: Kailang <kailang@realtek.com>; stable@vger.kernel.org;
> regressions@lists.linux.dev; Jaroslav Kysela <perex@perex.cz>; Takashi Iwai
> <tiwai@suse.com>; Linux Sound System <linux-sound@vger.kernel.org>; Greg
> KH <gregkh@linuxfoundation.org>
> Subject: Re: No sound on speakers X1 Carbon Gen 12
>
>
> External mail.
>
>
>
> I get the same output: axiom /home/dean # hda-verb /dev/snd/hwC0D0 0x5a
> SET_COEF_INDEX 0x00 nid = 0x5a, verb = 0x500, param = 0x0 value = 0x0
> axiom /home/dean # hda-verb /dev/snd/hwC0D0 0x5a GET_PROC_COEF 0x00
> nid = 0x5a, verb = 0xc00, param = 0x0 value = 0x0
>
> On Fri, 25 Oct 2024 at 02:16, Takashi Iwai <tiwai@suse.de> wrote:
> >
> > On Fri, 25 Oct 2024 03:22:38 +0200,
> > Dean Matthew Menezes wrote:
> > >
> > > I get the same values for both
> > >
> > > axiom /home/dean/linux-6.11.3/sound/pci/hda # hda-verb
> > > /dev/snd/hwC0D0 0x5a SET_COEF_INDEX 0x00 nid = 0x5a, verb = 0x500,
> > > param = 0x0 value = 0x0
> >
> > Here OK, but...
> >
> > > axiom /home/dean/linux-6.11.3/sound/pci/hda # hda-verb
> > > /dev/snd/hwC0D0 0x5a SET_PROC_COEF 0x00
> >
> > ... here run GET_PROC_COEF instead, i.e. to read the value.
> >
> >
> > thanks,
> >
> > Takashi
next prev parent reply other threads:[~2024-11-08 2:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAEkK70Tke7UxMEEKgRLMntSYeMqiv0PC8st72VYnBVQD-KcqVw@mail.gmail.com>
[not found] ` <2024101613-giggling-ceremony-aae7@gregkh>
2024-10-16 5:56 ` No sound on speakers X1 Carbon Gen 12 Linux regression tracking (Thorsten Leemhuis)
2024-10-16 9:21 ` Takashi Iwai
2024-10-16 21:18 ` Dean Matthew Menezes
2024-10-17 8:34 ` Takashi Iwai
2024-10-18 23:14 ` Dean Matthew Menezes
2024-10-19 8:12 ` Takashi Iwai
2024-10-19 23:11 ` Dean Matthew Menezes
2024-10-20 7:19 ` Takashi Iwai
2024-10-20 14:54 ` Dean Matthew Menezes
[not found] ` <CAEkK70TWL_me58QZXeJSq+=Ry3jA+CgZJttsgAPz1wP7ywqj6A@mail.gmail.com>
2024-10-20 15:29 ` Takashi Iwai
2024-10-20 15:33 ` Takashi Iwai
2024-10-21 1:30 ` Dean Matthew Menezes
2024-10-21 6:59 ` Takashi Iwai
2024-10-21 7:56 ` Kailang
2024-10-21 8:20 ` Takashi Iwai
2024-10-21 8:19 ` Kailang
2024-10-21 8:24 ` Takashi Iwai
2024-10-21 8:38 ` Kailang
2024-10-21 8:56 ` Takashi Iwai
2024-10-21 8:59 ` Kailang
2024-10-25 1:22 ` Dean Matthew Menezes
2024-10-25 7:17 ` Takashi Iwai
2024-10-25 7:32 ` Kailang
2024-10-26 0:22 ` Dean Matthew Menezes
2024-11-08 2:58 ` Kailang [this message]
2024-11-11 6:57 ` Kailang
2024-11-12 3:17 ` Dean Matthew Menezes
2024-11-13 6:22 ` Kailang
2024-11-13 6:43 ` Takashi Iwai
2024-10-21 9:31 ` Kailang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f42f84204f8d413ea79f13f9c1d745d9@realtek.com \
--to=kailang@realtek.com \
--cc=dean.menezes@utexas.edu \
--cc=gregkh@linuxfoundation.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=regressions@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox