Linux Sound subsystem development
 help / color / mirror / Atom feed
* Re: AWE32 PNP not working with 2.1.13x/2.2.0-prex
@ 1999-01-01 18:06 Dirk Nehring
  0 siblings, 0 replies; 2+ messages in thread
From: Dirk Nehring @ 1999-01-01 18:06 UTC (permalink / raw)
  To: linux-sound

On Wed, Dec 30, 1998 at 11:51:22PM +0100, Dirk Nehring wrote:
> Hi,
>
> it is impossible to run my AWE32 PNP with a prestine 2.1.13x or higher
> kernel. It works flawlessly under 2.0 and 2.0 with the commercial OSS
> drivers. I use the same settings under 2.1, but it failed:
>
> root@titan:~$ modprobe sb
> SB 4.13 detected OK (220)
> sb: Interrupt test on IRQ5 failed - Probable IRQ conflict
>
> isapnp.conf is correct:
>
> [...]
> #     ANSI string -->Creative SB AWE32 PnP<--
> (CONFIGURE CTL0043/80381 (LD 1
> #     ANSI string -->Audio<--
>  (INT 0 (IRQ 5 (MODE +E)))
>  (DMA 0 (CHANNEL 1))
>  (DMA 1 (CHANNEL 5))
>  (IO 0 (BASE 0x0220))
>  (IO 1 (BASE 0x0330))
>  (IO 2 (BASE 0x0388))
>  (ACT Y)
> ))
> [...]
>
> It also doesn't work with other tested interrupts.
>
> Do anyone have an idea?

I've found the bug: pnpdump 1.15 from RedHat 5.2 is broken (doesn't
reset the LD counters for new cards). I upgraded to 1.17 and it
magically works. Something for the FAQ?

Dirk

--
Dirk Nehring                 | Phone: +49 5241 80-<censored>
Telemedia Bertelsmann AG     | Fax:   +49 5241 80-9518
Carl-Bertelsmann-Str. 161 I  | E-Mail: dnehring @ telemedia.de
33311 Gütersloh              |

^ permalink raw reply	[flat|nested] 2+ messages in thread
* AWE32 PNP not working with 2.1.13x/2.2.0-prex
@ 1998-12-30 22:51 Dirk Nehring
  0 siblings, 0 replies; 2+ messages in thread
From: Dirk Nehring @ 1998-12-30 22:51 UTC (permalink / raw)
  To: linux-sound

Hi,

it is impossible to run my AWE32 PNP with a prestine 2.1.13x or higher
kernel. It works flawlessly under 2.0 and 2.0 with the commercial OSS
drivers. I use the same settings under 2.1, but it failed:

root@titan:~$ modprobe sb
SB 4.13 detected OK (220)
sb: Interrupt test on IRQ5 failed - Probable IRQ conflict

isapnp.conf is correct:

[...]
#     ANSI string -->Creative SB AWE32 PnP<--
(CONFIGURE CTL0043/80381 (LD 1
#     ANSI string -->Audio<--
 (INT 0 (IRQ 5 (MODE +E)))
 (DMA 0 (CHANNEL 1))
 (DMA 1 (CHANNEL 5))
 (IO 0 (BASE 0x0220))
 (IO 1 (BASE 0x0330))
 (IO 2 (BASE 0x0388))
 (ACT Y)
))
[...]

It also doesn't work with other tested interrupts.

Do anyone have an idea?

Dirk

--
Dirk Nehring                 | Phone: +49 5241 80-<censored>
Telemedia Bertelsmann AG     | Fax:   +49 5241 80-9518
Carl-Bertelsmann-Str. 161 I  | E-Mail: dnehring @ telemedia.de
33311 Gütersloh              |

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~1999-01-01 18:06 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-01-01 18:06 AWE32 PNP not working with 2.1.13x/2.2.0-prex Dirk Nehring
  -- strict thread matches above, loose matches on Subject: below --
1998-12-30 22:51 Dirk Nehring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox