* Re: Problem with cs4232.o
1999-01-24 23:44 Problem with cs4232.o Miles Lane
@ 1999-01-25 1:13 ` Alan Cox
1999-01-26 3:06 ` Miles Lane
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Alan Cox @ 1999-01-25 1:13 UTC (permalink / raw)
To: linux-sound
> The problem is that when I start up X, if I try to use the sound card
> a get a popping sound from the speakers and STDERR shows a messages
> stating that the program couldn't access /dev/dsp. If I then run
That means its being used by something
> effect of loading Gnome, but I don't think so.
If you have esd running then yes
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem with cs4232.o
1999-01-24 23:44 Problem with cs4232.o Miles Lane
1999-01-25 1:13 ` Alan Cox
@ 1999-01-26 3:06 ` Miles Lane
1999-01-31 8:52 ` Miles Lane
1999-01-31 17:38 ` Bill Nottingham
3 siblings, 0 replies; 5+ messages in thread
From: Miles Lane @ 1999-01-26 3:06 UTC (permalink / raw)
To: linux-sound
Alan,
I checked into this. When I boot the system,
the drivers load as I described earlier.
If I then attempt to run "esd" before starting X,
I get this error:
Sound: DMA (output) timed out - IRQ/DRQ config error?
I get this error running as root or from my user account.
Also, after starting X, if I try running xgalaga, I either
get the "Cannot access /dev/dsp" or I get what sound like
a sequence of short sound loops that slowly mutate.
Weird.
Thanks for any help you can offer!
Miles
On Mon, 25 Jan 1999, Alan Cox wrote:
> > The problem is that when I start up X, if I try to use the sound card
> > a get a popping sound from the speakers and STDERR shows a messages
> > stating that the program couldn't access /dev/dsp. If I then run
>
> That means its being used by something
>
> > effect of loading Gnome, but I don't think so.
>
> If you have esd running then yes
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Problem with cs4232.o
1999-01-24 23:44 Problem with cs4232.o Miles Lane
1999-01-25 1:13 ` Alan Cox
1999-01-26 3:06 ` Miles Lane
@ 1999-01-31 8:52 ` Miles Lane
1999-01-31 17:38 ` Bill Nottingham
3 siblings, 0 replies; 5+ messages in thread
From: Miles Lane @ 1999-01-31 8:52 UTC (permalink / raw)
To: linux-sound
Alan, thanks for your feedback thus far. Please see if you can
figure what's wrong by examining this addition system info.
THANKS!
Miles
A reminder: this is the problem where I get the
Sound: DMA (output) timed out -IRQ/DRQ config error?
when accessing my sound card after booting and logging in.
Unloading the cs4232.o module and then running "modprobe cs4232"
fixes the problem. I'd like to fix this so the driver loads
correctly on boot.
On Tue, 26 Jan 1999, Alan Cox wrote:
> Ok something there is a real bug. Can you mail me more info - especially
> the machine info
>
>
Here is my system information:
SOUND:
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux sparky 2.2.1 #4 Thu Jan 28 18:48:11 PST 1999 i686
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: Crystal audio controller (CS4236) (DUPLEX)
Synth devices:
0: Yamaha OPL3
Midi devices:
Timers:
0: System clock
1: Crystal audio controller (CS4236)
Mixers:
0: Crystal audio controller (CS4236)
MODULES:
ppp 17712 2 (autoclean)
slhc 4136 1 (autoclean) [ppp]
cs4232 2264 1
serial_cs 3504 0 (unused)
3c575_cb 16440 1
cb_enabler 1860 1 [3c575_cb]
ds 5460 2 [serial_cs cb_enabler]
i82365 20764 2
pcmcia_core 35384 0 [serial_cs cb_enabler ds i82365]
opl3 10244 1
uart401 5588 1 [cs4232]
ad1848 14276 1 [cs4232]
sound 54456 0 [cs4232 opl3 uart401 ad1848]
soundcore 2084 5 [sound]
IOPORTS:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0280-02ff : cb_enabler
0376-0376 : ide1
0388-038b : Yamaha OPL3
03c0-03df : vga+
03e8-03ef : serial_cs
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0530-0533 : Crystal audio controller
fcf0-fcf7 : ide0
fcf8-fcff : ide1
INTERRUPTS:
CPU0
0: 4703167 XT-PIC timer
1: 28049 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 28560935 XT-PIC Crystal audio controller
8: 1 XT-PIC rtc
10: 455925 XT-PIC serial
11: 4 XT-PIC i82365
12: 216084 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 148369 XT-PIC ide0
15: 254102 XT-PIC ide1
NMI: 0
DMA:
0: Crystal audio controller
1: Crystal audio controller
4: cascade
DEVICES:
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
128 ptm
136 pts
254 pcmcia
Block devices:
2 fd
3 ide0
22 ide1
CPUINFO:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : unknown
cpu MHz : 232.109606
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx osfxsr
bogomips : 231.01
MEMINFO:
total: used: free: shared: buffers: cached:
Mem: 81629184 71348224 10280960 46329856 1880064 30765056
Swap: 82538496 2924544 79613952
MemTotal: 79716 kB
MemFree: 10040 kB
MemShared: 45244 kB
Buffers: 1836 kB
Cached: 30044 kB
SwapTotal: 80604 kB
SwapFree: 77748 kB
KERNEL VERSION:
Linux version 2.2.1 (root@sparky) (gcc version 2.7.2.3) #4 Thu Jan 28 18:48:11 PST 1999
PCI DEVICES:
Bus 35, device 0, function 0:
Ethernet controller: 3Com Unknown device (rev 1).
Vendor id\x10b7. Device idQ57.
Medium devsel. IRQ 3.
Non-prefetchable 32 bit memory at 0x280 [0x280].
Non-prefetchable 32 bit memory at 0xa0021000 [0xa0021000].
Non-prefetchable 32 bit memory at 0xa0020000 [0xa0020000].
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (no AGP) (rev 2).
Medium devsel. Master Capable. Latencyd.
Prefetchable 32 bit memory at 0x0 [0x8].
Bus 0, device 2, function 0:
VGA compatible controller: Neomagic MagicGraph NM2160 (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency\x128. Min Gnt\x16.Max Lat%5.
Prefetchable 32 bit memory at 0xfd000000 [0xfd000008].
Non-prefetchable 32 bit memory at 0xfea00000 [0xfea00000].
Non-prefetchable 32 bit memory at 0xfed00000 [0xfed00000].
Bus 0, device 4, function 0:
CardBus bridge: Texas Instruments PCI1131 (rev 1).
Medium devsel. Master Capable. Latency\x168. Min Gnt\x192.Max Lat=7.
Bus 0, device 4, function 1:
CardBus bridge: Texas Instruments PCI1131 (rev 1).
Medium devsel. Master Capable. Latency\x168. Min Gnt\x128.Max Lat=7.
Bus 0, device 7, function 0:
Bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latencyd.
I/O at 0xfcf0 [0xfcf1].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latencyd.
I/O at 0xfcc0 [0xfcc1].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Problem with cs4232.o
1999-01-24 23:44 Problem with cs4232.o Miles Lane
` (2 preceding siblings ...)
1999-01-31 8:52 ` Miles Lane
@ 1999-01-31 17:38 ` Bill Nottingham
3 siblings, 0 replies; 5+ messages in thread
From: Bill Nottingham @ 1999-01-31 17:38 UTC (permalink / raw)
To: linux-sound
Miles Lane (root@amazon.com) said:
> A reminder: this is the problem where I get the
> Sound: DMA (output) timed out -IRQ/DRQ config error?
> when accessing my sound card after booting and logging in.
>
> Unloading the cs4232.o module and then running "modprobe cs4232"
> fixes the problem. I'd like to fix this so the driver loads
> correctly on boot.
<snip>
> MODULES:
<snip>
> pcmcia_core 35384 0 [serial_cs cb_enabler ds i82365]
I'd guess that pcmcia is stomping on the card ports
(and perhaps IRQ/DMA channels) when it gets loaded.
Try editing /etc/pcmcia/config.opts, and changing
the "include port" line from "0x100-0x4ff" (the default)
to "0x100-0x1ff". (You'd have to unload/reload pcmcia to
have this take effect, and possibly reboot.)
Does this help?
BIll
^ permalink raw reply [flat|nested] 5+ messages in thread