no sound

no sound

[Erico Freitas]

Hello all,

   I'm new to this list and I'm having a problem with my sound. I've looked at
the howto but I didn't get any clue as to what could have gone wrong.

   First, I've had sound for a while. A few days ago, when I was testing an
MPEG program, I couldn't hear any sound and even after I killed the program
there was no more sound. I rebooted the machine and now I have been getting
strange errors in the log

Here's an exerpt

Apr 11 19:46:15 peabrain modprobe: can't locate module sound-slot-0
Apr 11 19:46:15 peabrain modprobe: can't locate module sound-service-0-0
Apr 11 19:46:17 peabrain kernel: Soundblaster audio driver Copyright (C) by
Hannu Savolainen 1993-1996
Apr 11 19:46:17 peabrain kernel: sb: dsp reset failed.
Apr 11 19:46:17 peabrain insmod: /lib/modules/2.2.5-ac1/misc/sb.o: init_module:
Device or resource busy
Apr 11 19:46:17 peabrain modprobe: can't locate module sound-slot-0
Apr 11 19:46:17 peabrain modprobe: can't locate module sound-service-0-3
Apr 11 19:46:17 peabrain modprobe: can't locate module sound-slot-0
Apr 11 19:46:17 peabrain modprobe: can't locate module sound-service-0-3
Apr 11 19:46:39 peabrain modprobe: can't locate module sound-slot-0
Apr 11 19:46:39 peabrain modprobe: can't locate module sound-service-0-3

I don't know what could have gone wrong since it has been working up to a few
days ago. I've exausted my knowledge on the subject and I reach out to this
list.

I should also mention that from time to time I get a possible IRQ conflict
error. I haven't changed the IRQ or added any new hardware. Here's some
relevant info on the system

Linux 2.2.5ac1, glibc system AMD-K6 300 with built in sound on the board
(soundblaster compatible). Any ideas are greatly appreciated

Thanks,

--Erico.

  What we cannot speak about we must pass over in silence.
                -- Wittgenstein

no sound

[wackode .....!]

Hello list:

   I have a laptop toshiba satellite 2540CDS which uses a yamaha opl3-sax 
wdm sound card, how can i make it works?

I have linux redhat 6.2.

I´ve tried with oss, but isn´t supported.

      Regards
      Wackode....!
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

Re: no sound

[Rainer Wiener]

Hi wackode!

On Thu, 15 Jun 2000, wackode .....! wrote:

> Hello list:
> 
>    I have a laptop toshiba satellite 2540CDS which uses a yamaha opl3-sax 
> wdm sound card, how can i make it works?
> 
> I have linux redhat 6.2.
> 
> I´ve tried with oss, but isn´t supported.

Try the following in the kernel:

<M> Sound card support
<M> OSS sound modules
<M> MPU-401 support (NOT for SB16)
<M> Microsoft Sound System support
<M> Support for Yamaha OPL3-SA2, SA3, and SAx based PnP cards
<M> Yamaha OPL3-SA1 audio controller
<M> FM synthesizer (YM3812/OPL-3) support

and put this lines into the /etc/modules.conf file:

alias sound-slot-0 ad1848
alias sound-slot-0 opl3sa2
options sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options opl3sa2 mss_io=0x530 irq=9 dma=1 dma2=0 mpu_io=0x330 io=0x370


It could be that you must set the irq and dma in your BIOS.

Cu
Rainer

PS: Also have a look at my Homepage http://www.konqui.de
-- 
 http://www.konqui.de ** PGP PUBLIC KEY AVAILABLE ON REQUEST