* AC'97 and mic amplifier (in Ensoniq 1371)
@ 1999-09-27 8:34 Nagy Balazs
1999-09-27 8:54 ` Thomas Sailer
0 siblings, 1 reply; 2+ messages in thread
From: Nagy Balazs @ 1999-09-27 8:34 UTC (permalink / raw)
To: linux-sound
Hi,
I downloaded the AC'97 mixer specification and I found that AC97 has (or can
have) a 20dB preamp in the mic port. It can be turned on and off. Despite
of its simplicity I cannot see where this checkbox fits in the mixer
structure (eg. the code). Any ideas?
--
Regards: Kevin (Balazs) @ synergon
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: AC'97 and mic amplifier (in Ensoniq 1371)
1999-09-27 8:34 AC'97 and mic amplifier (in Ensoniq 1371) Nagy Balazs
@ 1999-09-27 8:54 ` Thomas Sailer
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Sailer @ 1999-09-27 8:54 UTC (permalink / raw)
To: linux-sound
Nagy Balazs wrote:
>
> Hi,
>
> I downloaded the AC'97 mixer specification and I found that AC97 has (or can
> have) a 20dB preamp in the mic port. It can be turned on and off. Despite
> of its simplicity I cannot see where this checkbox fits in the mixer
> structure (eg. the code). Any ideas?
The MIC preamp in the driver just extends the range of the MIC volume
slider,
i.e. if you turn the MIC volume fully up, the MIC preamp will be turned
on
and the MIC volume set to max.
Tom
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~1999-09-27 8:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-09-27 8:34 AC'97 and mic amplifier (in Ensoniq 1371) Nagy Balazs
1999-09-27 8:54 ` Thomas Sailer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox