* SB PCI128 mixer problems ( can't deactivate input passthru)
@ 1999-10-22 13:48 Benno Senoner
1999-10-22 16:18 ` llornkcor
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Benno Senoner @ 1999-10-22 13:48 UTC (permalink / raw)
To: linux-sound
Hi,
I'm running the a Redhat 6.1 box with Soundblaster PCI128,
PCM input/output works well,
except that I am unable to deactivate microphone input passthru on the output,
that means when record from the MIC I can always hear the dry signal on the
output which is very disturbing , especially when doing realtime processing.
I tried with both xmixer and kmix, no luck !
any advice ?
regards,
Benno.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: SB PCI128 mixer problems ( can't deactivate input passthru)
1999-10-22 13:48 SB PCI128 mixer problems ( can't deactivate input passthru) Benno Senoner
@ 1999-10-22 16:18 ` llornkcor
1999-10-22 16:18 ` llornkcor
1999-10-22 16:21 ` Benno Senoner
2 siblings, 0 replies; 4+ messages in thread
From: llornkcor @ 1999-10-22 16:18 UTC (permalink / raw)
To: linux-sound
I also use ossmixer, which allows you to select the input or mute it. If you
right click on the kmix channel, you can do the same, I think.
| Hi,
| I'm running the a Redhat 6.1 box with Soundblaster PCI128,
|
| PCM input/output works well,
| except that I am unable to deactivate microphone input passthru on the
output,
| that means when record from the MIC I can always hear the dry signal on
the
| output which is very disturbing , especially when doing realtime
processing.
|
| I tried with both xmixer and kmix, no luck !
|
| any advice ?
|
| regards,
| Benno.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: SB PCI128 mixer problems ( can't deactivate input passthru)
1999-10-22 13:48 SB PCI128 mixer problems ( can't deactivate input passthru) Benno Senoner
1999-10-22 16:18 ` llornkcor
@ 1999-10-22 16:18 ` llornkcor
1999-10-22 16:21 ` Benno Senoner
2 siblings, 0 replies; 4+ messages in thread
From: llornkcor @ 1999-10-22 16:18 UTC (permalink / raw)
To: linux-sound
----- Original Message -----
From: Benno Senoner <sbenno@gardena.net>
To: <linux-sound@vger.rutgers.edu>
Sent: Friday, October 22, 1999 7:48 AM
Subject: SB PCI128 mixer problems ( can't deactivate input passthru)
| Hi,
| I'm running the a Redhat 6.1 box with Soundblaster PCI128,
|
| PCM input/output works well,
| except that I am unable to deactivate microphone input passthru on the
output,
| that means when record from the MIC I can always hear the dry signal on
the
| output which is very disturbing , especially when doing realtime
processing.
|
| I tried with both xmixer and kmix, no luck !
|
| any advice ?
|
| regards,
| Benno.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: SB PCI128 mixer problems ( can't deactivate input passthru)
1999-10-22 13:48 SB PCI128 mixer problems ( can't deactivate input passthru) Benno Senoner
1999-10-22 16:18 ` llornkcor
1999-10-22 16:18 ` llornkcor
@ 1999-10-22 16:21 ` Benno Senoner
2 siblings, 0 replies; 4+ messages in thread
From: Benno Senoner @ 1999-10-22 16:21 UTC (permalink / raw)
To: linux-sound
On Fri, 22 Oct 1999, llornkcor wrote:
> I also use ossmixer, which allows you to select the input or mute it. If you
> right click on the kmix channel, you can do the same, I think.
>
Thank you,
it does work now !
right clicking on kmix and muting the MIC input works.
(Now I can record , but don't hear the dry signal on the output)
seems to be an xmixer fault ..
regards,
Benno.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~1999-10-22 16:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-10-22 13:48 SB PCI128 mixer problems ( can't deactivate input passthru) Benno Senoner
1999-10-22 16:18 ` llornkcor
1999-10-22 16:18 ` llornkcor
1999-10-22 16:21 ` Benno Senoner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox