* ESS ES1869 Plug and play audio drive configuration problem
@ 2000-01-28 1:37 Tan Su Wei
0 siblings, 0 replies; only message in thread
From: Tan Su Wei @ 2000-01-28 1:37 UTC (permalink / raw)
To: linux-sound
Hi all,
I've an ECC ES1869 plug and play audio drive, and I wish to
configure it on my Redhat 6.0 Kernel 2.2.15.
But when I run the sndconfig command:
It first detected the sound card, but the automatic configuration
was failed: ERROR message:
modprobe error
The following error occurred running the modprobe
sh: insmod: command not found
sound: No such file or directory
sound: No such file or directory
and then promt for manual setting....
which I'm not sure how to do it...
can some tell why there is such err... and how to encounter it...
and how we can know the irq, DMA , MPU I/O , I/O port setting if we are
required to manually configure it....
Thank you and best regards
Tan Su Wei
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-01-28 1:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-01-28 1:37 ESS ES1869 Plug and play audio drive configuration problem Tan Su Wei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox