[PATCH v4 0/2] spi: add new_device/delete_device sysfs interface

[PATCH v4 0/2] spi: add new_device/delete_device sysfs interface

[Vishwaroop A]

Add I2C-style new_device/delete_device sysfs attributes to SPI host
controllers, allowing userspace to instantiate and remove SPI devices
at runtime without device-tree changes.

Changes since v3:
  - Replaced holding add_lock across __spi_add_device() + list
    insertion (which caused an ABBA deadlock between add_lock and the
    kernfs active reference during concurrent unbind) with:
    * A 'dead' flag on spi_controller, set in
      spi_unregister_controller() under both add_lock and
      userspace_clients_lock.
    * __spi_add_device() checks ctlr->dead under add_lock to reject
      new devices after teardown begins.
    * new_device_store() checks ctlr->dead under userspace_clients_lock
      before list insertion, falling back to cleanup + ENODEV.
    * add_lock is released before device_del() so in-flight sysfs
      stores can drain without deadlocking.
    * get_device() taken before spi_add_device() prevents
      use-after-free if __unregister runs concurrently.
  - Used #if IS_ENABLED() preprocessor guard (not runtime IS_ENABLED())
    for the ctlr->dead check in __spi_add_device(), since the dead
    field is conditionally compiled.

Changes since v2:
  - Gated sysfs attributes and locking on CONFIG_SPI_DYNAMIC.

Changes since v1:
  - Added locking to prevent races between new_device_store() and
    concurrent spi_unregister_controller().

Link: https://lore.kernel.org/linux-tegra/909f0c92-d110-4253-903e-5c81e21e12c9@nvidia.com/

Vishwaroop A (2):
  spi: add new_device/delete_device sysfs interface
  docs: spi: add documentation for userspace device instantiation

 .../ABI/testing/sysfs-class-spi-master        |  34 +++
 Documentation/spi/index.rst                   |   1 +
 Documentation/spi/instantiating-devices.rst   |  88 +++++++
 drivers/spi/spi.c                             | 216 +++++++++++++++++-
 include/linux/spi/spi.h                       |  13 +
 5 files changed, 346 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-spi-master
 create mode 100644 Documentation/spi/instantiating-devices.rst

-- 
2.17.1

[PATCH v4 1/2] spi: add new_device/delete_device sysfs interface

[Vishwaroop A]

Development boards such as the Jetson AGX Orin expose SPI buses
on expansion headers (e.g. the 40-pin header) so that users can
connect and interact with SPI peripherals from userspace. The
standard way to get /dev/spidevB.C character device nodes for
this purpose is to register spi_device instances backed by the
spidev driver.

Today there is no viable way to do this on upstream kernels:

  - The spidev driver rejects the bare "spidev" compatible
    string in DT, since spidev is a Linux software interface
    and not a description of real hardware.
  - Vendor-specific compatible strings (e.g. "nvidia,tegra-spidev")
    have been rejected by DT maintainers for the same reason.

The I2C subsystem solved an analogous problem by exposing
new_device/delete_device sysfs attributes on each adapter. Add
the same interface to SPI host controllers, so that userspace
(e.g. a systemd unit at boot) can instantiate SPI devices at
runtime without needing anything in device-tree.

The new_device file accepts:

  <modalias> <chip_select> [<max_speed_hz> [<mode>]]

where chip_select is required, while max_speed_hz and mode are
optional and default to 0 if omitted. max_speed_hz == 0 is
clamped to the controller's maximum by spi_setup(); mode == 0
selects SPI mode 0 (CPOL=0, CPHA=0).

The modalias is used both as the device identifier and as a
driver_override, so that the device binds to the named driver
directly. This is necessary because some drivers like spidev
deliberately exclude generic names from their id_table.

Devices created this way are limited compared to those declared
via DT or board files:

  - No IRQ is assigned (the device gets IRQ 0 / no interrupt).
  - No platform_data or device properties are attached.
  - No OF node is associated with the device.

These limitations are acceptable for spidev, which only needs a
registered spi_device to expose a character device to userspace.

Only devices created via new_device can be removed through
delete_device; DT and platform devices are unaffected.

The sysfs attributes are gated behind CONFIG_SPI_DYNAMIC since
this feature adds a new way of dynamically instantiating and
removing SPI devices, and the add_lock locking in
spi_unregister_controller() is already conditional on
CONFIG_SPI_DYNAMIC.

A 'dead' flag on spi_controller prevents new device registration
and list insertion after spi_unregister_controller() begins
tearing down the controller. This avoids:

  1. An ABBA deadlock between add_lock and the kernfs active
     reference held by sysfs store callbacks. add_lock is
     released before device_del() so that in-flight sysfs
     operations can drain.

  2. Orphaned devices that could slip through after the
     userspace_clients cleanup but before device_del().

  3. Use-after-free if __unregister frees a device that
     new_device_store() still references. An extra get_device()
     before spi_add_device() holds the device alive.

Link: https://lore.kernel.org/linux-tegra/909f0c92-d110-4253-903e-5c81e21e12c9@nvidia.com/

Signed-off-by: Vishwaroop A <va@nvidia.com>
---
 drivers/spi/spi.c       | 216 ++++++++++++++++++++++++++++++++++++++--
 include/linux/spi/spi.h |  13 +++
 2 files changed, 223 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7001f5dce8bd..2b49c5fec1d7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -296,11 +296,187 @@ static const struct attribute_group spi_controller_statistics_group = {
 	.attrs  = spi_controller_statistics_attrs,
 };
 
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+
+/*
+ * new_device_store - instantiate a new SPI device from userspace
+ *
+ * Takes parameters: <modalias> <chip_select> [<max_speed_hz> [<mode>]]
+ *
+ * Examples:
+ *   echo spidev 0 > new_device
+ *   echo spidev 0 10000000 > new_device
+ *   echo spidev 0 10000000 3 > new_device
+ */
+static ssize_t
+new_device_store(struct device *dev, struct device_attribute *attr,
+		 const char *buf, size_t count)
+{
+	struct spi_controller *ctlr = container_of(dev, struct spi_controller,
+						   dev);
+	struct spi_device *spi;
+	char modalias[SPI_NAME_SIZE];
+	u16 chip_select;
+	u32 max_speed_hz = 0;
+	u32 mode = 0;
+	char *blank;
+	int n, res, status;
+
+	blank = strchr(buf, ' ');
+	if (!blank) {
+		dev_err(dev, "%s: Missing parameters\n", "new_device");
+		return -EINVAL;
+	}
+
+	if (blank - buf > SPI_NAME_SIZE - 1) {
+		dev_err(dev, "%s: Invalid device name\n", "new_device");
+		return -EINVAL;
+	}
+
+	memset(modalias, 0, sizeof(modalias));
+	memcpy(modalias, buf, blank - buf);
+
+	/*
+	 * sscanf fills only the fields it matches; unmatched optional
+	 * fields (max_speed_hz, mode) stay zero from initialisation above.
+	 * max_speed_hz == 0 is clamped to the controller max by spi_setup().
+	 * mode == 0 selects SPI mode 0 (CPOL=0, CPHA=0).
+	 */
+	res = sscanf(++blank, "%hu %u %u%n",
+		     &chip_select, &max_speed_hz, &mode, &n);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse chip select\n", "new_device");
+		return -EINVAL;
+	}
+
+	if (chip_select >= ctlr->num_chipselect) {
+		dev_err(dev, "%s: Chip select %u >= max %u\n", "new_device",
+			chip_select, ctlr->num_chipselect);
+		return -EINVAL;
+	}
+
+	spi = spi_alloc_device(ctlr);
+	if (!spi)
+		return -ENOMEM;
+
+	spi_set_chipselect(spi, 0, chip_select);
+	spi->max_speed_hz = max_speed_hz;
+	spi->mode = mode;
+	spi->cs_index_mask = BIT(0);
+	strscpy(spi->modalias, modalias, sizeof(spi->modalias));
+
+	/*
+	 * Set driver_override so that the device binds to the driver
+	 * named by modalias regardless of whether that driver's
+	 * id_table contains a matching entry.  This is needed because
+	 * some drivers (e.g. spidev) deliberately omit generic names
+	 * from their id_table.
+	 */
+	status = device_set_driver_override(&spi->dev, modalias);
+	if (status) {
+		spi_dev_put(spi);
+		return status;
+	}
+
+	/* Extra ref so concurrent __unregister cannot free the device */
+	get_device(&spi->dev);
+
+	status = spi_add_device(spi);
+	if (status) {
+		put_device(&spi->dev);
+		spi_dev_put(spi);
+		return status;
+	}
+
+	mutex_lock(&ctlr->userspace_clients_lock);
+	if (!ctlr->dead) {
+		list_add_tail(&spi->userspace_node, &ctlr->userspace_clients);
+		mutex_unlock(&ctlr->userspace_clients_lock);
+		put_device(&spi->dev);
+		dev_info(dev, "%s: Instantiated device %s at CS%u\n",
+			 "new_device", modalias, chip_select);
+		return count;
+	}
+	mutex_unlock(&ctlr->userspace_clients_lock);
+
+	/* Controller is dying; clean up if __unregister hasn't already */
+	if (device_is_registered(&spi->dev))
+		spi_unregister_device(spi);
+	put_device(&spi->dev);
+	return -ENODEV;
+}
+static DEVICE_ATTR_WO(new_device);
+
+static ssize_t
+delete_device_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t count)
+{
+	struct spi_controller *ctlr = container_of(dev, struct spi_controller,
+						   dev);
+	struct spi_device *spi, *next;
+	unsigned short cs;
+	char end;
+	int res;
+
+	res = sscanf(buf, "%hu%c", &cs, &end);
+	if (res < 1) {
+		dev_err(dev, "%s: Can't parse chip select\n", "delete_device");
+		return -EINVAL;
+	}
+	if (res > 1 && end != '\n') {
+		dev_err(dev, "%s: Extra parameters\n", "delete_device");
+		return -EINVAL;
+	}
+
+	res = -ENOENT;
+	mutex_lock(&ctlr->userspace_clients_lock);
+	list_for_each_entry_safe(spi, next, &ctlr->userspace_clients,
+				 userspace_node) {
+		if (spi_get_chipselect(spi, 0) == cs) {
+			dev_info(dev, "%s: Deleting device %s at CS%u\n",
+				 "delete_device", spi->modalias, cs);
+
+			list_del(&spi->userspace_node);
+			spi_unregister_device(spi);
+			res = count;
+			break;
+		}
+	}
+	mutex_unlock(&ctlr->userspace_clients_lock);
+
+	if (res < 0)
+		dev_err(dev, "%s: Can't find device in list\n",
+			"delete_device");
+	return res;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, 0200, NULL,
+				   delete_device_store);
+
+static struct attribute *spi_controller_userspace_attrs[] = {
+	&dev_attr_new_device.attr,
+	&dev_attr_delete_device.attr,
+	NULL,
+};
+
+static const struct attribute_group spi_controller_userspace_group = {
+	.attrs = spi_controller_userspace_attrs,
+};
+
 static const struct attribute_group *spi_controller_groups[] = {
 	&spi_controller_statistics_group,
+	&spi_controller_userspace_group,
 	NULL,
 };
 
+#else /* !CONFIG_SPI_DYNAMIC */
+
+static const struct attribute_group *spi_controller_groups[] = {
+	&spi_controller_statistics_group,
+	NULL,
+};
+
+#endif /* CONFIG_SPI_DYNAMIC */
+
 static void spi_statistics_add_transfer_stats(struct spi_statistics __percpu *pcpu_stats,
 					      struct spi_transfer *xfer,
 					      struct spi_message *msg)
@@ -724,10 +900,10 @@ static int __spi_add_device(struct spi_device *spi, struct spi_device *parent)
 		return status;
 
 	/* Controller may unregister concurrently */
-	if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
-	    !device_is_registered(&ctlr->dev)) {
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+	if (ctlr->dead)
 		return -ENODEV;
-	}
+#endif
 
 	if (ctlr->cs_gpiods) {
 		u8 cs;
@@ -3256,6 +3432,10 @@ struct spi_controller *__spi_alloc_controller(struct device *dev,
 	mutex_init(&ctlr->bus_lock_mutex);
 	mutex_init(&ctlr->io_mutex);
 	mutex_init(&ctlr->add_lock);
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+	mutex_init(&ctlr->userspace_clients_lock);
+	INIT_LIST_HEAD(&ctlr->userspace_clients);
+#endif
 	ctlr->bus_num = -1;
 	ctlr->num_chipselect = 1;
 	ctlr->num_data_lanes = 1;
@@ -3633,8 +3813,35 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
 		mutex_lock(&ctlr->add_lock);
 
+	/*
+	 * Mark dead and drain userspace_clients before __unregister,
+	 * since spi_unregister_device() doesn't do list_del() itself.
+	 */
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+	mutex_lock(&ctlr->userspace_clients_lock);
+	ctlr->dead = true;
+	while (!list_empty(&ctlr->userspace_clients)) {
+		struct spi_device *spi;
+
+		spi = list_first_entry(&ctlr->userspace_clients,
+				       struct spi_device,
+				       userspace_node);
+		list_del(&spi->userspace_node);
+		spi_unregister_device(spi);
+	}
+	mutex_unlock(&ctlr->userspace_clients_lock);
+#endif
+
 	device_for_each_child(&ctlr->dev, NULL, __unregister);
 
+	/*
+	 * Release add_lock before device_del(): holding it would
+	 * deadlock against kernfs_drain waiting for in-flight sysfs
+	 * stores.  ctlr->dead prevents new device registration.
+	 */
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+		mutex_unlock(&ctlr->add_lock);
+
 	/* First make sure that this controller was ever added */
 	mutex_lock(&board_lock);
 	found = idr_find(&spi_controller_idr, id);
@@ -3655,9 +3862,6 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 		idr_remove(&spi_controller_idr, id);
 	mutex_unlock(&board_lock);
 
-	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
-		mutex_unlock(&ctlr->add_lock);
-
 	/*
 	 * Release the last reference on the controller if its driver
 	 * has not yet been converted to devm_spi_alloc_host/target().
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 7587b1c5d7ec..7a86749d2701 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -250,6 +250,10 @@ struct spi_device {
 	u8			rx_lane_map[SPI_DEVICE_DATA_LANE_CNT_MAX];
 	u8			num_rx_lanes;
 
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+	struct list_head	userspace_node;
+#endif
+
 	/*
 	 * Likely need more hooks for more protocol options affecting how
 	 * the controller talks to each chip, like:
@@ -554,6 +558,9 @@ extern struct spi_device *devm_spi_new_ancillary_device(struct spi_device *spi,
  * @defer_optimize_message: set to true if controller cannot pre-optimize messages
  *	and needs to defer the optimization step until the message is actually
  *	being transferred
+ * @userspace_clients: list of SPI devices instantiated from userspace via
+ *	the sysfs new_device interface
+ * @userspace_clients_lock: mutex protecting @userspace_clients
  *
  * Each SPI controller can communicate with one or more @spi_device
  * children.  These make a small bus, sharing MOSI, MISO and SCK signals
@@ -809,6 +816,12 @@ struct spi_controller {
 	bool			queue_empty;
 	bool			must_async;
 	bool			defer_optimize_message;
+
+#if IS_ENABLED(CONFIG_SPI_DYNAMIC)
+	struct list_head	userspace_clients;
+	struct mutex		userspace_clients_lock;
+	bool			dead;
+#endif
 };
 
 static inline void *spi_controller_get_devdata(struct spi_controller *ctlr)
-- 
2.17.1

[PATCH v4 2/2] docs: spi: add documentation for userspace device instantiation

[Vishwaroop A]

Document the new_device and delete_device sysfs attributes on SPI
controllers:

  - Documentation/spi/instantiating-devices.rst: describes when and
    why this interface is needed, accepted parameters, usage examples,
    and limitations.
  - Documentation/ABI/testing/sysfs-class-spi-master: formal ABI
    entry for both attributes.

Signed-off-by: Vishwaroop A <va@nvidia.com>
---
 .../ABI/testing/sysfs-class-spi-master        | 34 +++++++
 Documentation/spi/index.rst                   |  1 +
 Documentation/spi/instantiating-devices.rst   | 88 +++++++++++++++++++
 3 files changed, 123 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-spi-master
 create mode 100644 Documentation/spi/instantiating-devices.rst

diff --git a/Documentation/ABI/testing/sysfs-class-spi-master b/Documentation/ABI/testing/sysfs-class-spi-master
new file mode 100644
index 000000000000..b498be128bad
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-spi-master
@@ -0,0 +1,34 @@
+What:		/sys/class/spi_master/spiB/new_device
+Date:		April 2026
+KernelVersion:	7.2
+Contact:	linux-spi@vger.kernel.org
+Description:	(WO) Instantiate a new SPI device on bus B, where B
+		is the bus number (0, 1, 2, ...). Takes parameters
+		in the format:
+
+		<modalias> <chip_select> [<max_speed_hz> [<mode>]]
+
+		where modalias is the driver name, chip_select is the
+		CS line number, and max_speed_hz and mode are optional.
+
+		The device can later be removed with delete_device.
+
+		Only devices created via this interface can be removed
+		with delete_device; platform and DT devices are not
+		affected.
+
+		Example:
+		# echo spidev 0 > /sys/class/spi_master/spi0/new_device
+		# echo spidev 0 10000000 > /sys/class/spi_master/spi0/new_device
+		# echo spidev 0 10000000 3 > /sys/class/spi_master/spi0/new_device
+
+What:		/sys/class/spi_master/spiB/delete_device
+Date:		April 2026
+KernelVersion:	7.2
+Contact:	linux-spi@vger.kernel.org
+Description:	(WO) Remove a SPI device previously created via
+		new_device. Takes a single parameter: the chip select
+		number of the device to remove.
+
+		Example:
+		# echo 0 > /sys/class/spi_master/spi0/delete_device
diff --git a/Documentation/spi/index.rst b/Documentation/spi/index.rst
index ac0c2233ce48..3f723e2c07da 100644
--- a/Documentation/spi/index.rst
+++ b/Documentation/spi/index.rst
@@ -8,6 +8,7 @@ Serial Peripheral Interface (SPI)
    :maxdepth: 1
 
    spi-summary
+   instantiating-devices
    spidev
    multiple-data-lanes
    butterfly
diff --git a/Documentation/spi/instantiating-devices.rst b/Documentation/spi/instantiating-devices.rst
new file mode 100644
index 000000000000..9ed08d94ae01
--- /dev/null
+++ b/Documentation/spi/instantiating-devices.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+How to instantiate SPI devices
+==============================
+
+SPI devices are normally declared statically via device-tree, ACPI, or
+board files. When the SPI controller is registered, these devices are
+instantiated automatically by the SPI core. This is the preferred method
+for any device with a proper kernel driver.
+
+Instantiate from user-space
+---------------------------
+
+In certain cases a SPI device cannot be declared statically:
+
+* The ``spidev`` driver, which provides raw userspace access to SPI
+  buses, explicitly rejects the bare ``"spidev"`` compatible string in
+  device-tree because spidev is a Linux implementation detail, not a
+  hardware description. Vendor-specific compatible strings for spidev
+  (e.g. ``"vendor,board-spidev"``) are also generally not accepted
+  upstream. Device-tree overlays do not help here either, since the
+  spidev driver performs the same compatible check regardless of how
+  the DT node was loaded.
+
+* You are developing or testing a SPI device on a development board
+  where the SPI bus is exposed on expansion headers, and the connected
+  device may change frequently.
+
+For these cases, a sysfs interface is provided on each SPI controller
+(similar to the I2C ``new_device``/``delete_device`` interface described
+in Documentation/i2c/instantiating-devices.rst). Two write-only
+attribute files are created in every SPI controller directory:
+``new_device`` and ``delete_device``.
+
+File ``new_device`` takes 2 to 4 parameters: the name of the SPI
+device (a string), the chip select number, and optionally
+``max_speed_hz`` and ``mode``::
+
+  <modalias> <chip_select> [<max_speed_hz> [<mode>]]
+
+The modalias is set both as the device's ``modalias`` field and as its
+``driver_override``. This ensures that the device binds to the named
+driver directly, bypassing the normal bus matching logic (OF, ACPI,
+and ``id_table``). This is necessary because drivers like ``spidev``
+deliberately exclude generic names from their ``id_table``.
+
+If ``max_speed_hz`` is omitted or 0, ``spi_setup()`` clamps it to
+the controller's maximum speed. If ``mode`` is omitted, SPI mode 0
+(CPOL=0, CPHA=0) is used.
+
+File ``delete_device`` takes a single parameter: the chip select
+number. As no two devices can share a chip select on a given SPI bus,
+the chip select is sufficient to uniquely identify the device.
+
+Examples::
+
+  # Create a spidev device on SPI bus 0, chip select 0
+  echo spidev 0 > /sys/class/spi_master/spi0/new_device
+
+  # Create with explicit clock rate and SPI mode
+  echo spidev 0 10000000 3 > /sys/class/spi_master/spi0/new_device
+
+  # Remove the device
+  echo 0 > /sys/class/spi_master/spi0/delete_device
+
+On systems that need spidev access at boot, a systemd service or
+udev rule can write to ``new_device`` after the SPI controller is
+available.
+
+Limitations
+^^^^^^^^^^^
+
+Devices created through this interface have the following limitations
+compared to devices declared via device-tree:
+
+* No interrupt (IRQ) support.
+* No additional properties such as ``spi-max-frequency`` DT bindings
+  or controller-specific configuration.
+* No platform data or software nodes.
+
+For ``spidev`` usage these limitations are not relevant, since spidev
+provides a raw byte-level interface that does not require any of these
+features.
+
+Only devices created via ``new_device`` can be removed through
+``delete_device``. Devices declared via device-tree, ACPI, or board
+files are not affected by this interface.
-- 
2.17.1