Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Haibo Chen <haibo.chen@nxp.com>
Cc: Han Xu <han.xu@nxp.com>, Yogesh Gaur <yogeshgaur.83@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, imx@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/5] spi: spi-nxp-fspi: Add OCT-DTR mode support
Date: Tue, 16 Sep 2025 11:43:16 -0400	[thread overview]
Message-ID: <aMmFlClUOkFG3TyH@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250916-flexspi-ddr-v1-5-69358b5dc862@nxp.com>

On Tue, Sep 16, 2025 at 03:56:44PM +0800, Haibo Chen wrote:
> Add OCT-DTR mode support in default, since flexspi do not supports
> swapping bytes on a 16 bit boundary in OCT-DTR mode, so mark swap16
> as false.
>
> lx2160a do not support DQS, so add a quirk to disable DTR mode for this
> platform.
>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
> ---
>  drivers/spi/spi-nxp-fspi.c | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
> index 15b094e8e892f0b61c1f320bba897fa1f588be91..389cb20872db6d9653a146eac7182b9a4574496b 100644
> --- a/drivers/spi/spi-nxp-fspi.c
> +++ b/drivers/spi/spi-nxp-fspi.c
> @@ -330,6 +330,8 @@
>
>  /* Access flash memory using IP bus only */
>  #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
> +/* Disable DTR */
> +#define FSPI_QUIRK_DISABLE_DTR	BIT(1)
>
>  struct nxp_fspi_devtype_data {
>  	unsigned int rxfifo;
> @@ -344,7 +346,7 @@ static struct nxp_fspi_devtype_data lx2160a_data = {
>  	.rxfifo = SZ_512,       /* (64  * 64 bits)  */
>  	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
>  	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
> -	.quirks = 0,
> +	.quirks = FSPI_QUIRK_DISABLE_DTR,
>  	.lut_num = 32,
>  	.little_endian = true,  /* little-endian    */
>  };
> @@ -1236,6 +1238,13 @@ static const struct spi_controller_mem_ops nxp_fspi_mem_ops = {
>  };
>
>  static const struct spi_controller_mem_caps nxp_fspi_mem_caps = {
> +	.dtr = true,
> +	.swap16 = false,
> +	.per_op_freq = true,
> +};
> +
> +static const struct spi_controller_mem_caps nxp_fspi_mem_caps_quirks = {
> +	.dtr = false,
>  	.per_op_freq = true,
>  };
>
> @@ -1351,7 +1360,12 @@ static int nxp_fspi_probe(struct platform_device *pdev)
>  	ctlr->bus_num = -1;
>  	ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
>  	ctlr->mem_ops = &nxp_fspi_mem_ops;
> -	ctlr->mem_caps = &nxp_fspi_mem_caps;
> +
> +	if (f->devtype_data->quirks & FSPI_QUIRK_DISABLE_DTR)
> +		ctlr->mem_caps = &nxp_fspi_mem_caps_quirks;

the name 'nxp_fspi_mem_caps_quirks' is too general.

nxp_fspi_mem_caps_disable_dtr?

Frank
> +	else
> +		ctlr->mem_caps = &nxp_fspi_mem_caps;
> +
>  	ctlr->dev.of_node = np;
>
>  	ret = devm_add_action_or_reset(dev, nxp_fspi_cleanup, f);
>
> --
> 2.34.1
>

      reply	other threads:[~2025-09-16 15:43 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-16  7:56 [PATCH 0/5] spi: spi-nxp-fspi: add DTR mode support Haibo Chen
2025-09-16  7:56 ` [PATCH 1/5] spi: spi-nxp-fspi: extract function nxp_fspi_dll_override() Haibo Chen
2025-09-16 15:28   ` Frank Li
2025-09-16  7:56 ` [PATCH 2/5] spi: spi-nxp-fspi: Add the DDR LUT command support Haibo Chen
2025-09-16 15:31   ` Frank Li
2025-09-16  7:56 ` [PATCH 3/5] spi: spi-nxp-fspi: add the support for sample data from DQS pad Haibo Chen
2025-09-16 15:37   ` Frank Li
2025-09-16  7:56 ` [PATCH 4/5] spi: spi-nxp-fspi: correct the clock rate for DTR mode Haibo Chen
2025-09-16 15:39   ` Frank Li
2025-09-16  7:56 ` [PATCH 5/5] spi: spi-nxp-fspi: Add OCT-DTR mode support Haibo Chen
2025-09-16 15:43   ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aMmFlClUOkFG3TyH@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=broonie@kernel.org \
    --cc=haibo.chen@nxp.com \
    --cc=han.xu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=yogeshgaur.83@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox