Re: [PATCH v5 4/5] ARM: dts: microchip: add sama7d65 SoC DT

[Claudiu Beznea <claudiu.beznea@tuxon.dev>]

Hi, Ryan,

On 07.01.2025 18:07, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Add Device Tree for sama7d65 SoC.
> 
> Co-developed-by: Dharma Balasubiramani <dharma.b@microchip.com>
> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
> Co-developed-by: Romain Sioen <romain.sioen@microchip.com>
> Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
> Co-developed-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
> ---
>  arch/arm/boot/dts/microchip/sama7d65.dtsi | 145 ++++++++++++++++++++++
>  1 file changed, 145 insertions(+)
>  create mode 100644 arch/arm/boot/dts/microchip/sama7d65.dtsi
> 
> diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
> new file mode 100644
> index 000000000000..03e1adfdcd34
> --- /dev/null
> +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + *  sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
> + *
> + *  Copyright (C) 2024 Microchip Technology, Inc. and its subsidiaries

I presume the , in "Microchip Technology, Inc." it a typo. I already
removed it while applied this. Just please let me know if all good with it.

> + *
> + *  Author: Ryan Wanner <Ryan.Wanner@microchip.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/mfd/at91-usart.h>
> +
> +/ {
> +	model = "Microchip SAMA7D65 family SoC";
> +	compatible = "microchip,sama7d65";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&gic>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +			device_type = "cpu";
> +			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
> +			clock-names = "cpu";
> +		};
> +	};
> +
> +	clocks {
> +		main_xtal: clock-mainxtal {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		 slow_xtal: clock-slowxtal {

There is an extra space in front of slow_xtal. I removed it while applying.

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +

There is an empty line here. I removed it while applying.

Everything else look good to me.

Thank you,
Claudiu