From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>,
slongerbeam@gmail.com, p.zabel@pengutronix.de,
shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com,
mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
martin.kepplinger@puri.sm, rmfrfs@gmail.com,
xavier.roumegue@oss.nxp.com,
linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de,
linux-imx@nxp.com, linux-media@vger.kernel.org,
linux-staging@lists.linux.dev
Subject: Re: (EXT) [PATCH 1/3] media: imx: De-stage imx7-mipi-csis
Date: Mon, 14 Feb 2022 11:51:50 +0200 [thread overview]
Message-ID: <YgomNhuo6hcai+7l@pendragon.ideasonboard.com> (raw)
In-Reply-To: <5885739.lOV4Wx5bFT@steina-w>
Hi Alexander,
On Mon, Feb 14, 2022 at 10:43:59AM +0100, Alexander Stein wrote:
> Am Freitag, 11. Februar 2022, 19:02:14 CET schrieb Jacopo Mondi:
> > The imx7-mipi-csis driver is in a good state and can be staged.
> >
> > Move the imx7-mipi-csis.c driver to the newly created
> > drivers/media/platform/imx directory and plumb the related
> > options in Kconfig and in Makefile.
>
> Please note that there is (at least) one pending patch at [1] which is crucial
> for my setup.
>
> Also what about calculation for clk_settle in mipi_csis_calculate_params()? Is
> it really ok to leave it at 0?
It should ideally be computed based on the timing parameters of the
transmitter, but until we figure out how to do so, I don't think it
blocks de-staging the driver. Moving to drivers/media/ doesn't mean
everything has to be perfect, we can continue improving the driver after
the move.
> Despite that I can't say if that driver is ready to be moved out of staging or
> not.
>
> Laurent, do you have any preference in which order they should be applied?
Not really, I'm fine with either order.
> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/
> 20220211142752.779952-6-alexander.stein@ew.tq-group.com/
>
> > Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> > ---
> > MAINTAINERS | 2 +-
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 1 +
> > drivers/media/platform/imx/Kconfig | 23 +++++++++++++++++++
> > drivers/media/platform/imx/Makefile | 1 +
> > .../platform}/imx/imx7-mipi-csis.c | 0
> > drivers/staging/media/imx/Makefile | 1 -
> > 7 files changed, 27 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/media/platform/imx/Kconfig
> > create mode 100644 drivers/media/platform/imx/Makefile
> > rename drivers/{staging/media => media/platform}/imx/imx7-mipi-csis.c
> > (100%)
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 83d27b57016f..5bdb8c881b0b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11891,8 +11891,8 @@ T: git git://linuxtv.org/media_tree.git
> > F: Documentation/admin-guide/media/imx7.rst
> > F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> > F: Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> > +F: drivers/media/platform/imx/imx7-mipi-csis.c
> > F: drivers/staging/media/imx/imx7-media-csi.c
> > -F: drivers/staging/media/imx/imx7-mipi-csis.c
> >
> > MEDIA DRIVERS FOR HELENE
> > M: Abylay Ospan <aospan@netup.ru>
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index 9fbdba0fd1e7..d9eeccffea69 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -171,6 +171,7 @@ source "drivers/media/platform/xilinx/Kconfig"
> > source "drivers/media/platform/rcar-vin/Kconfig"
> > source "drivers/media/platform/atmel/Kconfig"
> > source "drivers/media/platform/sunxi/Kconfig"
> > +source "drivers/media/platform/imx/Kconfig"
> >
> > config VIDEO_TI_CAL
> > tristate "TI CAL (Camera Adaptation Layer) driver"
> > diff --git a/drivers/media/platform/Makefile
> > b/drivers/media/platform/Makefile index 28eb4aadbf45..a9466c854610 100644
> > --- a/drivers/media/platform/Makefile
> > +++ b/drivers/media/platform/Makefile
> > @@ -20,6 +20,7 @@ obj-y += ti-vpe/
> > obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
> > obj-$(CONFIG_VIDEO_CODA) += coda/
> >
> > +obj-$(CONFIG_VIDEO_IMX) += imx/
> > obj-$(CONFIG_VIDEO_IMX_PXP) += imx-pxp.o
> > obj-$(CONFIG_VIDEO_IMX8_JPEG) += imx-jpeg/
> >
> > diff --git a/drivers/media/platform/imx/Kconfig
> > b/drivers/media/platform/imx/Kconfig new file mode 100644
> > index 000000000000..0cf35733040c
> > --- /dev/null
> > +++ b/drivers/media/platform/imx/Kconfig
> > @@ -0,0 +1,23 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +
> > +menuconfig VIDEO_IMX
> > + bool "V4L2 capture drivers for NXP i.MX devices"
> > + depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST)
> > + help
> > + Say yes here to enable support for capture drivers on i.MX SoCs.
> > + Support for the single SoC features are selectable in the sub-
> menu
> > + options.
> > +
> > +if VIDEO_IMX
> > +
> > +config VIDEO_IMX_MIPI_CSIS
> > + tristate "MIPI CSI-2 CSIS receiver found on i.MX7 and i.MX8 models"
> > + select MEDIA_CONTROLLER
> > + select V4L2_FWNODE
> > + select VIDEO_V4L2_SUBDEV_API
> > + default n
> > + help
> > + Video4Linux2 sub-device driver for the MIPI CSI-2 CSIS receiver
> > + v3.3/v3.6 found on some i.MX7 and i.MX8 SoCs.
> > +
> > +endif # VIDEO_IMX
> > diff --git a/drivers/media/platform/imx/Makefile
> > b/drivers/media/platform/imx/Makefile new file mode 100644
> > index 000000000000..ee272234c8d7
> > --- /dev/null
> > +++ b/drivers/media/platform/imx/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx7-mipi-csis.o
> > diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c
> > b/drivers/media/platform/imx/imx7-mipi-csis.c similarity index 100%
> > rename from drivers/staging/media/imx/imx7-mipi-csis.c
> > rename to drivers/media/platform/imx/imx7-mipi-csis.c
> > diff --git a/drivers/staging/media/imx/Makefile
> > b/drivers/staging/media/imx/Makefile index 19c2fc54d424..d82be898145b
> > 100644
> > --- a/drivers/staging/media/imx/Makefile
> > +++ b/drivers/staging/media/imx/Makefile
> > @@ -15,5 +15,4 @@ obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media-csi.o
> > obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
> >
> > obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> > -obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-mipi-csis.o
> > obj-$(CONFIG_VIDEO_IMX7_CSI) += imx8mq-mipi-csi2.o
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-02-14 9:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 18:02 [PATCH 0/3] media: De-stage imx7-mipi-csis.c Jacopo Mondi
2022-02-11 18:02 ` [PATCH 1/3] media: imx: De-stage imx7-mipi-csis Jacopo Mondi
2022-02-11 18:32 ` Fabio Estevam
2022-02-11 20:21 ` Laurent Pinchart
2022-02-14 9:23 ` Jacopo Mondi
2022-02-14 11:40 ` Fabio Estevam
2022-02-11 20:40 ` Laurent Pinchart
2022-02-14 9:43 ` (EXT) " Alexander Stein
2022-02-14 9:51 ` Laurent Pinchart [this message]
2022-02-11 18:02 ` [PATCH 2/3] media: imx: Rename imx7-mipi-csis.c to imx-mipi-csis.c Jacopo Mondi
2022-02-11 20:42 ` Laurent Pinchart
2022-02-14 10:28 ` Rui Miguel Silva
2022-02-11 22:15 ` kernel test robot
2022-02-11 23:57 ` kernel test robot
2022-02-14 10:20 ` Rui Miguel Silva
2022-02-14 11:20 ` Jacopo Mondi
2022-02-14 11:22 ` Laurent Pinchart
2022-02-11 18:02 ` [PATCH 3/3] media: imx: Remove reference to i.MX7 from driver Jacopo Mondi
2022-02-11 20:46 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YgomNhuo6hcai+7l@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=festevam@gmail.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin.kepplinger@puri.sm \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rmfrfs@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=slongerbeam@gmail.com \
--cc=xavier.roumegue@oss.nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox