From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mesih Kilinc <mesihkilinc@gmail.com>,
Icenowy Zheng <icenowy@aosc.io>,
Jesse Taube <mr.bossman075@gmail.com>,
Giulio Benetti <giulio.benetti@benettiengineering.com>,
George Hilliard <thirtythreeforty@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: [PATCH v2 00/12] ARM: suniv: dts: update Allwinner F1C100
Date: Thu, 17 Mar 2022 16:23:37 +0000 [thread overview]
Message-ID: <20220317162349.739636-1-andre.przywara@arm.com> (raw)
Hi,
an update to the F1C100 DT update series. I dropped the defconfig
patches for now, there is more to them than it seems, and they warrant a
separate series and discussion. Also I dropped the MMC binding patch
(v1 07/14), since Ulf already applied that.
Other than that this tries to clarify the watchdog clock situation in a
new patch (02/12), and fixes some smaller issues, as pointed out by
Samuel (many thanks for that!).
----------
The Allwinner F1C100 SoC didn't see much love since its initial merge in
2018: the originally submitted .dts files were very basic, and didn't
cover such simple peripherals as MMC and SPI.
On top of that the watchdog compatible string was wrong, leading to a
non-functional watchdog and reset functionality.
This series aims to fix that, after the series MMC and SPI work, and
make dtbs_check comes back clean.
This was tested with mounting a filesystem on /dev/mmcblk0 on a
LicheePi Nano, also with accessing the SPI flash through /dev/mtdblock
and mtd_debug. Reboot and watchdog now also work.
Mainline U-Boot recently gained F1C100 support, and those DT updates are
needed there as well to get full MMC and SPI access.
The series is structured as follows:
- Patches 01/12 and 03/12 fix the watchdog, which allows to properly
reboot the system.
- Patches 04-07 fix some shortcomings of the existing DT files, to make
them DT binding compliant.
- Patches 08-09 are Jesse's recent MMC patches, with the comments from
the last version addressed [1].
- Patches 10-12 add SPI support, to enable access to the SPI flash on
the LicheePi Nano board.
Cheers,
Andre
Changelog v1 ... v2:
- drop multi_v5_defconfig patches (v1 13/14 and 14/14)
- drop MMC bindings patch (v1 07/14): already applied
- dt-binding: move watchdog compatible string among the others
- dt-binding: new patch to clarify watchdog clock source
- dtsi: add missing @0 to cpu node
- add Acks and R-b's
- dtsi: fix ordering of SPI nodes (plus typo in commit message)
Changelog for the MMC patches [1]:
- bindings doc: extend commit message
- .dtsi: extend commit message, re-order mmc0_pins node, add
drive-strength
- .dts: extend commit message, add alias, regulator and disable-wp
[1] https://lore.kernel.org/linux-arm-kernel/20220130220325.1983918-1-Mr.Bossman075@gmail.com/
[2] https://lore.kernel.org/linux-usb/20200331170219.267732-1-thirtythreeforty@gmail.com/
Andre Przywara (9):
dt-bindings: watchdog: sunxi: fix F1C100s compatible
dt-bindings: watchdog: sunxi: clarify clock support
ARM: dts: suniv: F1C100: fix watchdog compatible
dt-bindings: arm: sunxi: document LicheePi Nano name
ARM: dts: suniv: F1C100: fix CPU node
ARM: dts: suniv: F1C100: fix timer node
dt-bindings: spi: sunxi: document F1C100 controllers
ARM: dts: suniv: F1C100: add SPI support
ARM: dts: suniv: licheepi-nano: add SPI flash
Jesse Taube (3):
ARM: dts: suniv: F1C100: add clock and reset macros
ARM: dts: suniv: F1C100: add MMC controllers
ARM: dts: suniv: licheepi-nano: add microSD card
.../devicetree/bindings/arm/sunxi.yaml | 5 +
.../bindings/spi/allwinner,sun6i-a31-spi.yaml | 1 +
.../watchdog/allwinner,sun4i-a10-wdt.yaml | 24 ++--
.../boot/dts/suniv-f1c100s-licheepi-nano.dts | 31 ++++++
arch/arm/boot/dts/suniv-f1c100s.dtsi | 104 ++++++++++++++++--
5 files changed, 140 insertions(+), 25 deletions(-)
--
2.25.1
next reply other threads:[~2022-03-17 16:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-17 16:23 Andre Przywara [this message]
2022-03-17 16:23 ` [PATCH v2 01/12] dt-bindings: watchdog: sunxi: fix F1C100s compatible Andre Przywara
2022-03-20 19:06 ` Rob Herring
2022-03-28 4:20 ` Samuel Holland
2022-03-17 16:23 ` [PATCH v2 02/12] dt-bindings: watchdog: sunxi: clarify clock support Andre Przywara
2022-03-25 21:10 ` Rob Herring
2022-03-28 4:20 ` Samuel Holland
2022-04-04 14:04 ` Guenter Roeck
2022-03-17 16:23 ` [PATCH v2 03/12] ARM: dts: suniv: F1C100: fix watchdog compatible Andre Przywara
2022-03-17 16:23 ` [PATCH v2 04/12] dt-bindings: arm: sunxi: document LicheePi Nano name Andre Przywara
2022-03-17 16:23 ` [PATCH v2 05/12] ARM: dts: suniv: F1C100: add clock and reset macros Andre Przywara
2022-03-17 16:23 ` [PATCH v2 06/12] ARM: dts: suniv: F1C100: fix CPU node Andre Przywara
2022-03-28 4:20 ` Samuel Holland
2022-03-17 16:23 ` [PATCH v2 07/12] ARM: dts: suniv: F1C100: fix timer node Andre Przywara
2022-03-17 16:23 ` [PATCH v2 08/12] ARM: dts: suniv: F1C100: add MMC controllers Andre Przywara
2022-03-17 16:23 ` [PATCH v2 09/12] ARM: dts: suniv: licheepi-nano: add microSD card Andre Przywara
2022-03-17 16:23 ` [PATCH v2 10/12] dt-bindings: spi: sunxi: document F1C100 controllers Andre Przywara
2022-03-17 16:23 ` [PATCH v2 11/12] ARM: dts: suniv: F1C100: add SPI support Andre Przywara
2022-03-28 4:20 ` Samuel Holland
2022-03-17 16:23 ` [PATCH v2 12/12] ARM: dts: suniv: licheepi-nano: add SPI flash Andre Przywara
2022-04-06 20:33 ` [PATCH v2 00/12] ARM: suniv: dts: update Allwinner F1C100 Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220317162349.739636-1-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=giulio.benetti@benettiengineering.com \
--cc=icenowy@aosc.io \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mesihkilinc@gmail.com \
--cc=mr.bossman075@gmail.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=thirtythreeforty@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox