[PATCH v2 6/6] riscv: dts: allwinner: d1: Add the IOMMU node

[Samuel Holland <samuel@sholland.org>]

D1 contains an IOMMU for its video-related hardware. Add the node, and
hook it up to the masters which are already described in the devicetree.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v2:
 - New patch for v2

 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index dff363a3c934..ade50f1e01a4 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -138,6 +138,14 @@ ccu: clock-controller@2001000 {
 			#reset-cells = <1>;
 		};
 
+		iommu: iommu@2010000 {
+			compatible = "allwinner,sun20i-d1-iommu";
+			reg = <0x2010000 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(64) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
 		dmic: dmic@2031000 {
 			compatible = "allwinner,sun20i-d1-dmic",
 				     "allwinner,sun50i-h6-dmic";
@@ -574,6 +582,7 @@ mixer0: mixer@5100000 {
 				 <&display_clocks CLK_MIXER0>;
 			clock-names = "bus", "mod";
 			resets = <&display_clocks RST_MIXER0>;
+			iommus = <&iommu 2>;
 
 			ports {
 				#address-cells = <1>;
@@ -596,6 +605,7 @@ mixer1: mixer@5200000 {
 				 <&display_clocks CLK_MIXER1>;
 			clock-names = "bus", "mod";
 			resets = <&display_clocks RST_MIXER1>;
+			iommus = <&iommu 2>;
 
 			ports {
 				#address-cells = <1>;
-- 
2.37.4