public inbox for linux-sunxi@lists.linux.dev
 help / color / mirror / Atom feed
From: Ryan Walklin <ryan@testtoast.com>
To: Andre Przywara <andre.przywara@arm.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Chris Morgan <macromorgan@hotmail.com>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
	Ryan Walklin <ryan@testtoast.com>
Subject: [PATCH 3/4] arm64: dts: allwinner: h700: Add RG35XX-Plus DTS
Date: Sun, 14 Apr 2024 20:33:47 +1200	[thread overview]
Message-ID: <20240414083347.131724-6-ryan@testtoast.com> (raw)
In-Reply-To: <20240414083347.131724-2-ryan@testtoast.com>

From: Ryan Walklin <ryan@testtoast.com>

The RG35XX-Plus adds a RTL8221CS SDIO Wifi/BT chip to the RG35XX (2024).

Enabled in this DTS:
- WiFi
- Bluetooth
- Supporting power sequence and GPIOs

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
 .../sun50i-h700-anbernic-rg35xx-plus.dts      | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 000000000000..b9a163ed5d0b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Andre Przywara <andre.przywara@arm.com>.
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+    model = "Anbernic RG35XX Plus";
+    compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+    wifi_pwrseq: wifi_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        clocks = <&rtc CLK_OSC32K_FANOUT>;
+        clock-names = "ext_clock";
+        pinctrl-0 = <&x32clk_fanout_pin>;
+        pinctrl-names = "default";
+        post-power-on-delay-ms = <200>;
+        reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+    };
+};
+
+/* SDIO WiFi RTL8821CS, powered by CLDO4, regon=PG18, hostwake=PG15 */
+&mmc1 {
+    vmmc-supply = <&reg_cldo4>;
+    vqmmc-supply = <&reg_vcc1v8>;
+    mmc-pwrseq = <&wifi_pwrseq>;
+    bus-width = <4>;
+    non-removable;
+    status = "okay";
+
+    sdio_wifi: wifi@1 {
+       reg = <1>;
+       interrupt-parent = <&pio>;
+       interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+       interrupt-names = "host-wake";
+    };
+};
+
+&uart0 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart0_ph_pins>;
+    status = "okay";
+};
+
+/* Bluetooth RTL8821CS, RST_N: PG19, BT_WAKE: PG17, BT_HOSTWAKE: PG16 */
+&uart1 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+    uart-has-rtscts;
+    status = "okay";
+
+    bluetooth {
+        compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+        device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>;
+        host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>;
+    };
+};
-- 
2.44.0


  parent reply	other threads:[~2024-04-14  8:37 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-14  8:33 [PATCH 0/4] arm64: dts: allwinner: Add Anbernic RG35XX (Plus/H/2024) support Ryan Walklin
2024-04-14  8:33 ` [PATCH 1/4] dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants Ryan Walklin
2024-04-14  9:07   ` Krzysztof Kozlowski
2024-04-17  9:05     ` Ryan Walklin
2024-04-17 13:33       ` Krzysztof Kozlowski
2024-04-17 13:58         ` Andre Przywara
2024-04-17 19:22           ` Krzysztof Kozlowski
2024-04-17  9:54     ` Andre Przywara
2024-04-17 19:22   ` Krzysztof Kozlowski
2024-04-14  8:33 ` [PATCH 2/4] arm64: dts: allwinner: h700: Add RG35XX 2024 DTS Ryan Walklin
2024-04-14  9:09   ` Krzysztof Kozlowski
2024-04-17  9:08     ` Ryan Walklin
2024-04-14 17:46   ` Andre Przywara
2024-04-14  8:33 ` Ryan Walklin [this message]
2024-04-14  9:10   ` [PATCH 3/4] arm64: dts: allwinner: h700: Add RG35XX-Plus DTS Krzysztof Kozlowski
2024-04-14 18:37   ` Andre Przywara
2024-04-14  8:33 ` [PATCH 4/4] arm64: dts: allwinner: h700: Add RG35XX-H DTS Ryan Walklin
2024-04-15  0:12   ` Andre Przywara
2024-04-15 18:46 ` [PATCH 0/4] arm64: dts: allwinner: Add Anbernic RG35XX (Plus/H/2024) support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240414083347.131724-6-ryan@testtoast.com \
    --to=ryan@testtoast.com \
    --cc=andre.przywara@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=macromorgan@hotmail.com \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox