Re: [PATCH v2] ARM: dts: bananapi: add support for PHY LEDs

[Alexander Dahl <ada@thorsis.com>]

Hallo Michael,

Am Wed, May 07, 2025 at 08:20:04PM +0200 schrieb Michael Klein:
> The RTL8211E ethernet PHY driver has recently gained support for
> controlling PHY LEDs via /sys/class/leds. The Bananapi M1 has three
> LEDs connected to the RTL8211E PHY. Add the corresponding nodes to
> the device tree.
> 
> v2: Refine commit message

This changelog should usually go below the '---' so it won't end up in
the commit message, but in the e-mail only.

Greets
Alex

> 
> Signed-off-by: Michael Klein <michael@fossekall.de>
> ---
>  .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> index 46ecf9db2324..d8b362c9661a 100644
> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> @@ -48,6 +48,7 @@
>  
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
>  
>  / {
>  	model = "LeMaker Banana Pi";
> @@ -169,6 +170,32 @@ &ir0 {
>  &gmac_mdio {
>  	phy1: ethernet-phy@1 {
>  		reg = <1>;
> +
> +		leds {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			led@0 {
> +				reg = <0>;
> +				color = <LED_COLOR_ID_GREEN>;
> +				function = LED_FUNCTION_LAN;
> +				linux,default-trigger = "netdev";
> +			};
> +
> +			led@1 {
> +				reg = <1>;
> +				color = <LED_COLOR_ID_AMBER>;
> +				function = LED_FUNCTION_LAN;
> +				linux,default-trigger = "netdev";
> +			};
> +
> +			led@2 {
> +				reg = <2>;
> +				color = <LED_COLOR_ID_BLUE>;
> +				function = LED_FUNCTION_LAN;
> +				linux,default-trigger = "netdev";
> +			};
> +		};
>  	};
>  };
>  
> -- 
> 2.39.5
> 
>