* [PATCH] add Eachlink H6 Mini
@ 2025-05-08 14:34 Shivam Gupta
2025-05-08 15:25 ` Andre Przywara
0 siblings, 1 reply; 5+ messages in thread
From: Shivam Gupta @ 2025-05-08 14:34 UTC (permalink / raw)
To: linux-sunxi; +Cc: hundertzwei
From: hundertzwei <46927478+hundertzwei@users.noreply.github.com>
extracted from miniH6-public-3Gddr-20181113-update.img
---
sys_config/h6/eachlink_h6mini.fex | 1816 +++++++++++++++++++++++++++++
1 file changed, 1816 insertions(+)
create mode 100644 sys_config/h6/eachlink_h6mini.fex
diff --git a/sys_config/h6/eachlink_h6mini.fex b/sys_config/h6/eachlink_h6mini.fex
new file mode 100644
index 0000000..db232d5
--- /dev/null
+++ b/sys_config/h6/eachlink_h6mini.fex
@@ -0,0 +1,1816 @@
+;sun50iw6p1 application
+;---------------------------------------------------------------------------------------------------------
+; Explanation: The string in the script distinguishes the case, the user can modify the value behind "=", but do not modify the previous String
+; Description of GPIO: Port: port+internal serial number <functional allocation> <internal resistance status> <drive ability> <output level> <status> <status>
+;---------------------------------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "petrel-p1"
+
+[platform]
+eraseflag = 1
+
+;----------------------------------------------------------------------------------
+; burn_key: 0-do not use dragonKey 1-use dragonKey
+; dragonboard_test: 0-build dragonboard for flash boot 1-build dragonboard for TF boot
+; power_mode: 0-use axp 1-use dummy axp
+; advert_enable 0-close advert logo 1-open advert logo (Only when multi -core startup is effective)
+;----------------------------------------------------------------------------------
+[target]
+boot_clock = 1320
+storage_type = -1
+burn_key = 1
+dragonboard_test = 0
+power_mode = 1
+advert_enable = 0
+
+[secure]
+dram_region_mbytes = 80
+drm_region_mbytes = 0
+drm_region_start_mbytes = 0
+
+[power_sply]
+dcdca_vol = 1001000
+aldo2_vol = 1003300
+
+cldo2_vol = 3300
+cldo3_vol = 3300
+bldo3_vol = 1800
+bldo4_vol = 1001800
+;---------------------------------------------
+;
+; normal config: eg. px_bias = "pmu_name:supply_name:voltage"
+;
+; pmu_name = axp809, axp806
+; supply_name = dcdc1, dcdc2, aldo1, gpio1ldo, etc...
+;---------------------------------------------
+[gpio_bias]
+pc_bias = "axp806:bldo2:1800"
+pg_bias = "axp806:bldo3:1800"
+
+
+;----------------------------------------------------------------------------------
+; ir_boot_recovery_used : 1: used this function 0: not used
+; ir_work_mode : Pattern selection
+; 0: flashing the machine,
+; 1: One -click recovery (uboot stage),
+; 2: Android recovery,
+; 3: Android restore the factory settings.
+; If it is not set, the default is Android recovery.
+; ir_press_times : IR remote control pressed several times in succession before taking effect.
+; ir_detect_time : IR remote control detection time, unit: ms, if the default is 3000ms
+; ir_key_no_duplicate : whether IR remote control can be repeated, 0: repeat (default), 1: not repeated;
+; Do not repeat a key, no matter how many times, only IR_PRESS_TIMES;
+; Repeated application scenarios are the combination key function, such as: alternately press the 'menu key' and 'volume-key' to enter Android recovery.
+; ir_recovery_key_code0 : ir check key code
+; ir_addr_code0 : ir key addr
+; you can increase ir support num, like:
+; ir_recovery_key_code1, or 2, 3, but limit to 16
+;----------------------------------------------------------------------------------
+[ir_boot_recovery]
+ir_boot_recovery_used = 0
+ir_work_mode = 2
+ir_press_times = 2
+ir_detect_time = 2000
+ir_key_no_duplicate = 0
+ir_recovery_key_code0 = 0x04
+ir_addr_code0 = 0xff00
+ir_recovery_key_code1 = 0x10
+ir_addr_code1 = 0xff00
+
+
+;----------------------------------------------------------------------------------
+; sprite_gpio0: led that indicates the state of card product
+; next_work: the action after finishing card product 2-reboot 3-shutdown
+;----------------------------------------------------------------------------------
+[card_boot]
+logical_start = 40960
+sprite_gpio0 = port:PL04<1><default><default><1>
+next_work = 3
+
+;----------------------------------------------------------------------------------
+; used : Module Enable End, 1: Open, 0: Close
+; press_mode_enable : Long -press mode enable, 1: open, 0: Close, close
+; a) If this mode is turned on, the key_work_mode fails, short_press_mode and long_press_mode
+; Recovery button can trigger two different modes by long press and short pressing
+; b) If the mode is turned off, the key_work_mode takes effect, and the recovery button can only trigger one mode.
+; key_work_mode : mode selection
+; 0: flashing the machine,
+; 1: One -click recovery (uboot stage),
+; 2: Android recovery,
+; 3: Android restore the factory settings.
+; If you do not set, the mode is Android recovery.
+; short_press_mode : Long press the trigger mode, the option is the same as above.
+; long_press_mode : The mode of triggering, the options are the same as above.
+; key_press_time : Define the time of long press, unit: milliseconds.
+; recovery_key : button configuration.
+;----------------------------------------------------------------------------------
+[key_boot_recovery]
+used = 1
+press_mode_enable = 0
+key_work_mode = 1
+short_press_mode = 0
+long_press_mode = 1
+key_press_time = 2000
+recovery_key = port:PL02<0><default><default><default>
+
+;----------------------------------------------------------------------------------
+; GPIO init on uboot
+; PH02 - for hdmi scdc control
+;----------------------------------------------------------------------------------
+[boot_init_gpio]
+boot_init_gpio_used = 1
+gpio0 = port:PL07<1><default><default><1>
+gpio1 = port:PL04<1><default><default><0>
+gpio2 = port:PH02<1><default><default><1>
+
+
+;---------------------------------------------------------------------------------------------------------
+; if 1 == standby_mode, then support super standby;
+; else, support normal standby.
+; standby_stay_cpu: 1: keep vcc-cpu when standby
+; 0: close vcc-cpu when standby, default 0;
+;---------------------------------------------------------------------------------------------------------
+[pm_para]
+standby_mode = 1
+standby_stay_cpu =1
+
+[card0_boot_para]
+card_ctrl = 0
+card_high_speed = 1
+card_line = 4
+sdc_d1 = port:PF0<2><1><2><default>
+sdc_d0 = port:PF1<2><1><2><default>
+sdc_clk = port:PF2<2><1><2><default>
+sdc_cmd = port:PF3<2><1><2><default>
+sdc_d3 = port:PF4<2><1><2><default>
+sdc_d2 = port:PF5<2><1><2><default>
+
+[card2_boot_para]
+card_ctrl = 2
+card_high_speed = 1
+card_line = 8
+sdc_ds = port:PC01<3><1><3><default>
+sdc_clk = port:PC04<3><1><3><default>
+sdc_cmd = port:PC05<3><1><3><default>
+sdc_d0 = port:PC06<3><1><3><default>
+sdc_d1 = port:PC07<3><1><3><default>
+sdc_d2 = port:PC08<3><1><3><default>
+sdc_d3 = port:PC09<3><1><3><default>
+sdc_d4 = port:PC10<3><1><3><default>
+sdc_d5 = port:PC11<3><1><3><default>
+sdc_d6 = port:PC12<3><1><3><default>
+sdc_d7 = port:PC13<3><1><3><default>
+sdc_emmc_rst = port:PC14<3><1><3><default>
+sdc_ex_dly_used = 2
+sdc_io_1v8 = 1
+sdc_tm4_hs400_max_freq = 100
+sdc_tm4_hs200_max_freq = 150
+
+[twi_para]
+twi_port = 0
+twi_scl = port:PL00<3><1><0><default>
+twi_sda = port:PL01<3><1><0><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx = port:PH00<2><1><default><default>
+uart_debug_rx = port:PH01<2><1><default><default>
+
+[jtag_para]
+jtag_enable = 1
+jtag_ms = port:PD23<5><default><default><default>
+jtag_ck = port:PD24<5><default><default><default>
+jtag_do = port:PD25<5><default><default><default>
+jtag_di = port:PD26<5><default><default><default>
+
+[clock]
+pll4 = 300
+pll6 = 600
+pll8 = 360
+pll9 = 297
+pll10 = 264
+
+;*****************************************************************************
+; sdram configuration
+;
+; if dram_clk ≠ 0, will use dram_clk to set dram clk.
+; if dram_clk = 0, will use dram_tpr7 to set dram clk.
+; dram_tpr7[31:24] to set DDR4 clk,
+; dram_tpr7[23:16] to set DDR3 clk,
+; dram_tpr7[15: 8] to set LPDDR2 clk,
+; dram_tpr7[ 7: 0] to set LPDDR3 clk.
+; ps: unit = 12M.
+; for example, if dram_tpr7[31:24] = 0x10,
+; then the dram clk of DDR4 will be (16*12)M.
+;
+;*****************************************************************************
+[dram_para]
+clk = 840
+dram_type = 3
+dram_zq = 0x3b3bfb
+dram_odt_en = 0x1
+dram_para1 = 0x30FB
+dram_para2 = 0x00000000
+dram_mr0 = 0x1c70
+dram_mr1 = 0x40
+dram_mr2 = 0x18
+dram_mr3 = 0x0
+dram_mr4 = 0x0
+dram_mr5 = 0x400
+dram_mr6 = 0x848
+dram_tpr0 = 0x0048A192
+dram_tpr1 = 0x01b1a94b
+dram_tpr2 = 0x00061043
+dram_tpr3 = 0x78787896
+dram_tpr4 = 0x0000
+dram_tpr5 = 0x0
+dram_tpr6 = 0x09090900
+dram_tpr7 = 0x1e08a1e0
+dram_tpr8 = 0x0
+dram_tpr9 = 0
+dram_tpr10 = 0x00
+dram_tpr11 = 0x00000000
+dram_tpr12 = 0x1212
+dram_tpr13 = 0x2001
+;----------------------------------------------------------------------------------
+;os life cycle para configuration
+;----------------------------------------------------------------------------------
+
+;------------------------------------------------------------------------------;
+; 10/100/100Mbps Ethernet MAC Controller Configure ;
+;------------------------------------------------------------------------------;
+; Configuration option: ;
+; gmac_used --- 1: gmac used, 0: not used ;
+; gmac_powerx -- A[:B] A: axp channel, B: voltage value ;
+; phy-mode -- rgmii, rmii, mii ;
+; tx-delay -- transmit clock delay: 0~7 ;
+; rx-delay -- receive clock delay: 0~31 ;
+;------------------------------------------------------------------------------;
+[gmac0]
+gmac0_used = 1
+phy-mode = "rmii"
+gmac_rxd1 = port:PA00<2><default><3><default>
+gmac_rxd0 = port:PA01<2><default><3><default>
+gmac_crs = port:PA02<2><default><3><default>
+gmac_rxerr = port:PA03<2><default><3><default>
+gmac_txd1 = port:PA04<2><default><3><default>
+gmac_txd0 = port:PA05<2><default><3><default>
+gmac_txclk = port:PA06<2><default><3><default>
+gmac_txen = port:PA07<2><default><3><default>
+gmac_mdc = port:PA08<2><default><3><default>
+gmac_mdio = port:PA09<2><default><3><default>
+gmac-power0 = "vcc-ephy"
+gmac-power1 =
+gmac-power2 =
+tx-delay = 0
+rx-delay = 0
+
+;----------------------------------------------------------------------------------
+;i2c configuration
+;----------------------------------------------------------------------------------
+[twi0]
+twi0_used = 0
+twi0_scl = port:PD25<2><default><default><default>
+twi0_sda = port:PD26<2><default><default><default>
+
+[twi0_suspend]
+twi0_scl = port:PD25<7><default><default><default>
+twi0_sda = port:PD26<7><default><default><default>
+
+[twi1]
+twi1_used = 0
+twi1_scl = port:PH05<4><default><default><default>
+twi1_sda = port:PH06<4><default><default><default>
+
+[twi1_suspend]
+twi1_scl = port:PH05<7><default><default><default>
+twi1_sda = port:PH06<7><default><default><default>
+
+[twi2]
+twi2_used = 0
+twi2_scl = port:PD23<2><default><default><default>
+twi2_sda = port:PD24<2><default><default><default>
+
+[twi2_suspend]
+twi2_scl = port:PD23<7><default><default><default>
+twi2_sda = port:PD24<7><default><default><default>
+
+[twi3]
+twi3_used = 1
+twi3_scl = port:PB17<2><default><default><default>
+twi3_sda = port:PB18<2><default><default><default>
+;----------------------------------------------------------------------------------
+;TWI device configuration
+;compatible --- device name
+;reg --- device address
+;----------------------------------------------------------------------------------
+;[twi0/twi_board0]
+;compatible =
+;reg =
+
+;----------------------------------------------------------------------------------
+;uart configuration
+;uart_port --- x (/dev/ttySx, x=0,1,2,...)
+;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
+;----------------------------------------------------------------------------------
+[uart0]
+uart0_used = 1
+uart0_port = 0
+uart0_type = 2
+uart0_tx = port:PH00<2><1><default><default>
+uart0_rx = port:PH01<2><1><default><default>
+
+[uart0_suspend]
+uart0_tx = port:PH00<7><1><default><default>
+uart0_rx = port:PH01<7><1><default><default>
+
+[uart1]
+uart1_used = 1
+uart1_port = 1
+uart1_type = 4
+uart1_tx = port:PG6<2><1><default><default>
+uart1_rx = port:PG7<2><1><default><default>
+uart1_rts = port:PG8<2><1><default><default>
+uart1_cts = port:PG9<2><1><default><default>
+uart1_bt = 1
+
+[uart1_suspend]
+uart1_tx = port:PG6<7><1><default><default>
+uart1_rx = port:PG7<7><1><default><default>
+uart1_rts = port:PG8<7><1><default><default>
+uart1_cts = port:PG9<7><1><default><default>
+
+[uart2]
+uart2_used = 0
+uart2_port = 2
+uart2_type = 4
+uart2_tx = port:PD19<4><1><default><default>
+uart2_rx = port:PD20<4><1><default><default>
+uart2_rts = port:PD21<4><1><default><default>
+uart2_cts = port:PD22<4><1><default><default>
+
+[uart2_suspend]
+uart2_tx = port:PD19<7><1><default><default>
+uart2_rx = port:PD20<7><1><default><default>
+uart2_rts = port:PD21<7><1><default><default>
+uart2_cts = port:PD22<7><1><default><default>
+
+[uart3]
+uart3_used = 0
+uart3_port = 3
+uart3_type = 4
+uart3_tx = port:PD23<4><1><default><default>
+uart3_rx = port:PD24<4><1><default><default>
+uart3_rts = port:PD25<4><1><default><default>
+uart3_cts = port:PD26<4><1><default><default>
+
+[uart3_suspend]
+uart3_tx = port:PD23<7><1><default><default>
+uart3_rx = port:PD24<7><1><default><default>
+uart3_rts = port:PD25<7><1><default><default>
+uart3_cts = port:PD26<7><1><default><default>
+
+;----------------------------------------------------------------------------------
+;SPI controller configuration
+;----------------------------------------------------------------------------------
+[spi0]
+spi0_used = 0
+spi0_cs_number = 1
+spi0_cs_bitmap = 1
+spi0_cs0 = port:PC05<4><1><default><default>
+spi0_sclk = port:PC00<4><default><default><default>
+spi0_mosi = port:PC02<4><default><default><default>
+spi0_miso = port:PC03<4><default><default><default>
+
+[spi0_suspend]
+spi0_cs0 = port:PC05<7><1><default><default>
+spi0_sclk = port:PC00<7><default><default><default>
+spi0_mosi = port:PC02<7><default><default><default>
+spi0_miso = port:PC03<7><default><default><default>
+
+[spi1]
+spi1_used = 0
+spi1_cs_number = 1
+spi1_cs_bitmap = 1
+spi1_cs0 = port:PH03<2><1><default><default>
+spi1_sclk = port:PH04<2><default><default><default>
+spi1_mosi = port:PH05<2><default><default><default>
+spi1_miso = port:PH06<2><default><default><default>
+
+[spi1_suspend]
+spi1_cs0 = port:PH03<7><1><default><default>
+spi1_sclk = port:PH04<7><default><default><default>
+spi1_mosi = port:PH05<7><default><default><default>
+spi1_miso = port:PH06<7><default><default><default>
+
+;----------------------------------------------------------------------------------
+;SPI device configuration
+;compatible --- device name
+;spi-max-frequency --- work frequency
+;reg --- chip select
+;optional properties: spi-cpha, spi-cpol, spi-cs-high
+;----------------------------------------------------------------------------------
+;[spi0/spi_board0]
+;compatible =
+;spi-max-frequency =
+;reg =
+;spi-cpha
+;spi-cpol
+;spi-cs-high
+
+;----------------------------------------------------------------------------------
+;pcie controller configuration
+;----------------------------------------------------------------------------------
+[pcie]
+pcie_used = 0
+pcie_rest = port:PH03<1><default><default><default>
+pcie_power = port:PL08<1><default><default><default>
+pcie_reg = port:PM03<1><default><default><default>
+pcie_iodvdd = 1800
+pcie_speed_gen = 0x02
+pcie_vdd = "vdd-pcie"
+pcie_vdd_vol = 900000
+pcie_vcc = "vcc-pcie"
+pcie_vcc_vol = 1800000
+pcie_vcc_slot = "vcc-pcie-slot"
+pcie_vcc_slot_vol = 3300000
+
+;----------------------------------------------------------------------------------
+;resistance tp configuration
+;----------------------------------------------------------------------------------
+[rtp_para]
+rtp_used = 0
+rtp_screen_size = 5
+rtp_regidity_level = 5
+rtp_press_threshold_enable = 0
+rtp_press_threshold = 0x1f40
+rtp_sensitive_level = 0xf
+rtp_exchange_x_y_flag = 0
+
+;----------------------------------------------------------------------------------
+;capacitor tp configuration
+;external int function
+;wakeup output function
+;notice --- tp_int_port & tp_io_port use the same port
+;----------------------------------------------------------------------------------
+[ctp]
+compatible = "allwinner,sun50i-ctp-para"
+ctp_used = 0
+ctp_twi_id = 0
+ctp_twi_addr = 0x5d
+ctp_screen_max_x = 1280
+ctp_screen_max_y = 800
+ctp_revert_x_flag = 1
+ctp_revert_y_flag = 1
+ctp_exchange_x_y_flag = 1
+
+ctp_int_port = port:PH04<6><default><default><default>
+ctp_wakeup = port:PH08<1><default><default><1>
+ctp_power_ldo = "vcc-ctp"
+ctp_power_ldo_vol = 3300
+ctp_power_io =
+
+;--------------------------------------------------------------------------------
+; CTP automatic detection configuration
+;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
+;Module name postposition 1 said detection, 0 means no detection.
+;--------------------------------------------------------------------------------
+[ctp_list]
+compatible = "allwinner,sun50i-ctp-list"
+ctp_det_used = 0
+ft5x_ts = 1
+gt82x = 1
+gslX680 = 1
+gt9xx_ts = 0
+gt9xxnew_ts = 1
+gt811 = 1
+zet622x = 1
+aw5306_ts = 1
+
+;----------------------------------------------------------------------------------
+;touch key configuration
+;----------------------------------------------------------------------------------
+[tkey_para]
+tkey_used = 0
+tkey_twi_id =
+tkey_twi_addr =
+tkey_int =
+
+;----------------------------------------------------------------------------------
+;motor configuration
+;----------------------------------------------------------------------------------
+[motor_para]
+motor_used = 1
+motor_shake = port:power3<1><default><default><1>
+
+[nand0_para]
+nand0_support_2ch = 0
+
+nand0_used = 1
+nand0_we = port:PC00<2><0><1><default>
+nand0_ale = port:PC01<2><0><1><default>
+nand0_cle = port:PC02<2><0><1><default>
+nand0_ce1 = port:PC15<2><1><1><default>
+nand0_ce0 = port:PC03<2><1><1><default>
+nand0_nre = port:PC04<2><0><1><default>
+nand0_rb0 = port:PC05<2><1><1><default>
+nand0_rb1 = port:PC16<2><1><1><default>
+nand0_d0 = port:PC06<2><0><1><default>
+nand0_d1 = port:PC07<2><0><1><default>
+nand0_d2 = port:PC08<2><0><1><default>
+nand0_d3 = port:PC09<2><0><1><default>
+nand0_d4 = port:PC10<2><0><1><default>
+nand0_d5 = port:PC11<2><0><1><default>
+nand0_d6 = port:PC12<2><0><1><default>
+nand0_d7 = port:PC13<2><0><1><default>
+nand0_ndqs = port:PC14<2><0><1><default>
+;nand0_ce2 = port:PC17<2><1><1><default>
+;nand0_ce3 = port:PC18<2><1><1><default>
+
+nand0_regulator1 = "vcc-nand"
+nand0_regulator2 = "none"
+nand0_cache_level = 0x55aaaa55
+nand0_flush_cache_num = 0x55aaaa55
+nand0_capacity_level = 0x55aaaa55
+nand0_id_number_ctl = 0x55aaaa55
+nand0_print_level = 0x55aaaa55
+nand0_p0 = 0x55aaaa55
+nand0_p1 = 0x55aaaa55
+nand0_p2 = 0x55aaaa55
+nand0_p3 = 0x55aaaa55
+
+ ;----------------------------------------------------------------------------------
+ ;esm.img load addr (fdt node: /soc/esm)
+ ;
+ ;esm_img_size_addr : store esm.img size, will be updated when booting
+ ;esm_img_buff_addr : store esm.img buff, will be updated when booting
+ ;----------------------------------------------------------------------------------
+ [esm]
+ esm_img_size_addr = 0
+ esm_img_buff_addr = 0
+
+;----------------------------------------------------------------------------------
+;disp init configuration
+;
+;disp_mode (0:screen0<screen0,fb0>)
+;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
+;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
+; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
+;screenx_output_format (0:RGB 1:yuv444 2:yuv422 3:yuv420)
+;screenx_output_bits (0:8bit 1:10bit 2:12bit 2:16bit)
+;screenx_output_eotf (0:reserve 4:SDR 16:HDR10 18:HLG)
+;screenx_output_cs (0:undefined 257:BT709 260:BT601 263:BT2020)
+;screenx_output_dvi_hdmi (0:undefined 1:dvi mode 2:hdmi mode)
+;screen0_output_range (0:default 1:full 2:limited)
+;screen0_output_scan (0:no data 1:overscan 2:underscan)
+;screen0_output_aspect_ratio (8-same as original picture 9-4:3 10-16:9 11-14:9)
+;fbx format (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
+;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
+;disp_para_zone (0: disp parameter store in the part Reserve1), 1: disp paremeter store in file parameter.fex)
+;----------------------------------------------------------------------------------
+[disp]
+disp_init_enable = 1
+disp_mode = 0
+
+screen0_output_type = 3
+screen0_output_mode = 10
+
+screen0_output_format = 1
+screen0_output_bits = 0
+screen0_output_eotf = 4
+screen0_output_cs = 257
+screen0_output_dvi_hdmi = 2
+screen0_output_range = 2
+screen0_output_scan = 0
+screen0_output_aspect_ratio = 8
+
+screen1_output_type = 3
+screen1_output_mode = 2
+screen1_output_format = 1
+screen1_output_bits = 0
+screen1_output_eotf = 4
+screen1_output_cs = 260
+screen1_output_dvi_hdmi = 2
+screen1_output_range = 2
+screen1_output_scan = 0
+screen1_output_aspect_ratio = 8
+
+dev0_output_type = 4
+dev0_output_mode = 10
+dev0_screen_id = 0
+dev0_do_hpd = 1
+
+dev1_output_type = 2
+dev1_output_mode = 11
+dev1_screen_id = 1
+dev1_do_hpd = 1
+
+dev2_output_type = 0
+def_output_dev = 0
+hdmi_mode_check = 1
+
+fb0_format = 0
+fb0_width = 1280
+fb0_height = 720
+
+fb1_format = 0
+fb1_width = 0
+fb1_height = 0
+
+disp_para_zone = 1
+
+;----------------------------------------------------------------------------------
+;lcd0 configuration
+
+;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp
+;lcd_backlight lcd init backlight
+;lcd_x: lcd horizontal resolution
+;lcd_y: lcd vertical resolution
+;lcd_width: width of lcd in mm
+;lcd_height: height of lcd in mm
+;lcd_dclk_freq: in MHZ unit
+;lcd_pwm_freq: in HZ unit
+;lcd_pwm_pol: lcd backlight PWM polarity
+;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
+;lcd_hbp: hsync back porch
+;lcd_ht: hsync total cycle
+;lcd_vbp: vsync back porch
+;lcd_vt: vysnc total cycle
+;lcd_hspw: hsync plus width
+;lcd_vspw: vysnc plus width
+;lcd_lvds_if: 0:single link; 1:dual link
+;lcd_lvds_colordepth: 0:8bit; 1:6bit
+;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
+;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
+;lcd_hv_clk_phase lcd hv panel lock phase, 0:0 degree; 1:90 degree; 2: 180 degree; 3: 270 degree
+;lcd_hv_sync_polarity lcd hv panel sync signals polarity
+; 0:vsync active low, hsync active low; 1:vsync active high, hsync active low
+; 2:vsync active low, hsync active high; 3:vsync active high, hsync active high
+;lcd_gamma_en lcd gamma correction enable
+;lcd_bright_curve_en lcd bright curve correction enable
+;lcd_cmap_en lcd color map function enable
+;----------------------------------------------------------------------------------
+[lcd0]
+lcd_used = 0
+
+lcd_driver_name = "default_lcd"
+lcd_backlight = 50
+lcd_if = 0
+lcd_x = 800
+lcd_y = 600
+lcd_width = 150
+lcd_height = 94
+lcd_dclk_freq = 40
+lcd_pwm_used = 0
+lcd_pwm_ch = 0
+lcd_pwm_freq = 50000
+lcd_pwm_pol = 1
+lcd_pwm_max_limit = 255
+lcd_hbp = 216
+lcd_ht = 1056
+lcd_hspw = 128
+lcd_vbp = 27
+lcd_vt = 628
+lcd_vspw = 4
+lcd_lvds_if = 0
+lcd_lvds_colordepth = 1
+lcd_lvds_mode = 0
+lcd_frm = 1
+lcd_hv_clk_phase = 0
+lcd_hv_sync_polarity= 0
+lcd_gamma_en = 0
+lcd_bright_curve_en = 0
+lcd_cmap_en = 0
+
+lcd_bl_en =
+lcd_bl_en_power = "none"
+lcd_power = "vcc-lcd-0"
+lcd_fix_power = "vcc-dsi-33"
+
+lcdd0 = port:PD00<2><0><default><default>
+lcdd1 = port:PD01<2><0><default><default>
+lcdd2 = port:PD02<2><0><default><default>
+lcdd3 = port:PD03<2><0><default><default>
+lcdd4 = port:PD04<2><0><default><default>
+lcdd5 = port:PD05<2><0><default><default>
+lcdd6 = port:PD06<2><0><default><default>
+lcdd7 = port:PD07<2><0><default><default>
+lcdd8 = port:PD08<2><0><default><default>
+lcdd9 = port:PD09<2><0><default><default>
+lcdd10 = port:PD10<2><0><default><default>
+lcdd11 = port:PD11<2><0><default><default>
+lcdd12 = port:PD12<2><0><default><default>
+lcdd13 = port:PD13<2><0><default><default>
+lcdd14 = port:PD14<2><0><default><default>
+lcdd15 = port:PD15<2><0><default><default>
+lcdd16 = port:PD16<2><0><default><default>
+lcdd17 = port:PD17<2><0><default><default>
+lcdd18 = port:PD18<2><0><default><default>
+lcdd19 = port:PD19<2><0><default><default>
+lcdd20 = port:PD20<2><0><default><default>
+lcdd21 = port:PD21<2><0><default><default>
+lcd_pin_power = "vcc-pd"
+
+[lcd0_suspend]
+lcdd0 = port:PD00<7><0><default><default>
+lcdd1 = port:PD01<7><0><default><default>
+lcdd2 = port:PD02<7><0><default><default>
+lcdd3 = port:PD03<7><0><default><default>
+lcdd4 = port:PD04<7><0><default><default>
+lcdd5 = port:PD05<7><0><default><default>
+lcdd6 = port:PD06<7><0><default><default>
+lcdd7 = port:PD07<7><0><default><default>
+lcdd8 = port:PD08<7><0><default><default>
+lcdd9 = port:PD09<7><0><default><default>
+lcdd10 = port:PD10<7><0><default><default>
+lcdd11 = port:PD11<7><0><default><default>
+lcdd12 = port:PD12<7><0><default><default>
+lcdd13 = port:PD13<7><0><default><default>
+lcdd14 = port:PD14<7><0><default><default>
+lcdd15 = port:PD15<7><0><default><default>
+lcdd16 = port:PD16<7><0><default><default>
+lcdd17 = port:PD17<7><0><default><default>
+lcdd18 = port:PD18<7><0><default><default>
+lcdd19 = port:PD19<7><0><default><default>
+lcdd20 = port:PD20<7><0><default><default>
+lcdd21 = port:PD21<7><0><default><default>
+
+[hdmi]
+hdmi_used = 1
+;hdmi_power = "vcc3v3-hdmi"
+hdmi_hdcp_enable = 0
+hdmi_hdcp22_enable = 0
+hdmi_cts_compatibility = 0
+hdmi_cec_support = 0
+;hdmi_cec_super_standby = 1
+hdmi_skip_bootedid = 1
+ddc_scl = port:PH8<2><default><1><default>
+ddc_sda = port:PH9<2><default><1><default>
+cec_io = port:PH10<2><default><1><default>
+
+ddc_en_io_ctrl = 1
+ddc_io_ctrl = port:PH02<1><default><default><0>
+;----------------------------------------------------------------------------------
+;tv configuration
+;dac_src (dac no,support dac_src0~dac_src3,dac num max is 4)
+;interface (interface type,1<->cvbs,2<->YPBPR,4<->SVIDEO)
+;dac_type (0<->composite,1<->luma,2<->chroma,3<->reserved,4<->y/green,
+; 5<->u/pb/blue,6<->v/pr/red)
+;NOTE: tv0,tv1 can not use the same dac_src.
+;----------------------------------------------------------------------------------
+
+[tv0]
+used = 0
+dac_src0 = 0
+dac_type0 = 0
+interface = 1
+
+;tv(ac200 cvbs) configuration
+;tv_used 1 : enable this module.
+;tv_module_name : the module name.
+;tv_regulator_name : regutlate name of ac200
+;tv_twi_used 1 : use i2c to communitcate with slave-device ; other: not use i2c.
+;tv_twi_id : the id-number of i2c-controler of host-device.
+;tv_twi_addr : the i2c-address of slave-device.
+;tv_clk_div : divide number of tcon_lcd clock
+;ccir* : ac200 video pin inf
+;----------------------------------------------------------------------------------
+[ac200]
+tv_used = 1
+tv_module_name = "tv_ac200"
+tv_twi_used = 1
+tv_twi_id = 3
+tv_twi_addr = 16
+tv_pwm_ch=1
+tv_clk_div=5
+tv_regulator_name="vcc-audio-33"
+
+ccir_clk = port:PB00<2><0><default><default>
+ccir_de = port:PB01<2><0><default><default>
+ccir_hs = port:PB02<2><0><default><default>
+ccir_vs = port:PB03<2><0><default><default>
+ccir_do0 = port:PB04<2><0><default><default>
+ccir_do1 = port:PB05<2><0><default><default>
+ccir_do2 = port:PB06<2><0><default><default>
+ccir_do3 = port:PB07<2><0><default><default>
+ccir_do4 = port:PB08<2><0><default><default>
+ccir_do5 = port:PB09<2><0><default><default>
+ccir_do6 = port:PB10<2><0><default><default>
+ccir_do7 = port:PB11<2><0><default><default>
+
+;----------------------------------------------------------------------------------
+;for hotplug please do not suspend ccir_clk pin
+;----------------------------------------------------------------------------------
+[ac200_suspend]
+;ccir_clk = port:PB00<7><0><default><default>
+ccir_de = port:PB01<7><0><default><default>
+ccir_hs = port:PB02<7><0><default><default>
+ccir_vs = port:PB03<7><0><default><default>
+ccir_do0 = port:PB04<7><0><default><default>
+ccir_do1 = port:PB05<7><0><default><default>
+ccir_do2 = port:PB06<7><0><default><default>
+ccir_do3 = port:PB07<7><0><default><default>
+ccir_do4 = port:PB08<7><0><default><default>
+ccir_do5 = port:PB09<7><0><default><default>
+ccir_do6 = port:PB10<7><0><default><default>
+ccir_do7 = port:PB11<7><0><default><default>
+;----------------------------------------------------------------------------------
+;pwm config
+;----------------------------------------------------------------------------------
+[pwm0]
+pwm_used = 1
+pwm_positive = port:PD22<2><0><default><default>
+
+[pwm0_suspend]
+pwm_positive = port:PD22<7><0><default><default>
+
+[pwm1]
+pwm_used = 1
+pwm_positive = port:PB19<2><0><default><default>
+
+[pwm1_suspend]
+pwm_positive = port:PB19<7><0><default><default>
+
+
+[pwm16]
+pwm16_used = 0
+pwm_positive = port:PL08<2><0><default><default>
+
+[pwm16_suspend]
+pwm_positive = port:PL08<7><0><default><default>
+
+;-----------------------------------------------------------------
+;auto_hpd - 1:need hotplud for hdmi/tv; 0:don't hotplud for lcd
+;output_type - 0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga (as default config in homlet)
+;hdmi_channel - the display channel for hdmi (as default config in homlet)
+;cvbs_channel - the display channel for cvbs (as default config in homlet)
+;hdmi_mode - as default config for output of hdmi in homlet
+;cvbs_mode - as default config for output of tv in homlet. 11:PAL; 14:NTSC
+;hdmi_mode_check - disable/enable the function of checking hdmi mode, 0 is disable, 1 is enable
+;-----------------------------------------------------------------
+[boot_disp]
+auto_hpd = 1
+output_disp = 0
+output_type = 3
+output_mode = 11
+hdmi_channel = 0
+hdmi_mode = 4
+;cvbs_channel = 1
+;cvbs_mode = 11
+;hdmi_mode_check = 1
+;output_full = 1
+
+;--------------------------------------------------------------------------------
+;csi (COMS Sensor Interface) configuration
+;csi(x)_dev(x)_used: 0:disable 1:enable
+;csi(x)_dev(x)_isp_used 0:not use isp 1:use isp
+;csi(x)_dev(x)_fmt: 0:yuv 1:bayer raw rgb
+;csi(x)_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
+;csi(x)_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
+;csi(x)_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
+;csi(x)_dev(x)_iovdd: camera module io power handle string, pmu power supply
+;csi(x)_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
+;csi(x)_dev(x)_avdd: camera module analog power handle string, pmu power supply
+;csi(x)_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
+;csi(x)_dev(x)_dvdd: camera module core power handle string, pmu power supply
+;csi(x)_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
+;csi(x)_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
+;csi(x)_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
+;fill voltage in uV, e.g. iovdd = 2.8V, csix_iovdd_vol = 2800000
+;fill handle string as below:
+;axp22_eldo3
+;axp22_dldo4
+;axp22_eldo2
+;fill handle string "" when not using any pmu power supply
+;--------------------------------------------------------------------------------
+
+[csi0]
+csi0_used = 0
+csi0_sensor_list = 0
+csi0_pck = port:PD00<4><default><default><default>
+csi0_mck = port:PD01<4><0><1><0>
+csi0_hsync = port:PD02<4><default><default><default>
+csi0_vsync = port:PD03<4><default><default><default>
+csi0_d0 = port:PD04<4><default><default><default>
+csi0_d1 = port:PD05<4><default><default><default>
+csi0_d2 = port:PD06<4><default><default><default>
+csi0_d3 = port:PD07<4><default><default><default>
+csi0_d4 = port:PD08<4><default><default><default>
+csi0_d5 = port:PD09<4><default><default><default>
+csi0_d6 = port:PD10<4><default><default><default>
+csi0_d7 = port:PD11<4><default><default><default>
+csi0_sck = port:PD12<4><default><default><default>
+csi0_sda = port:PD13<4><default><default><default>
+
+[csi0/csi0_dev0]
+csi0_dev0_used = 0
+csi0_dev0_mname = "ov5640"
+csi0_dev0_twi_addr = 0x78
+csi0_dev0_pos = "rear"
+csi0_dev0_isp_used = 1
+csi0_dev0_fmt = 0
+csi0_dev0_stby_mode = 0
+csi0_dev0_vflip = 0
+csi0_dev0_hflip = 0
+csi0_dev0_iovdd = "iovdd-csi"
+csi0_dev0_iovdd_vol = 2800000
+csi0_dev0_avdd = "avdd-csi"
+csi0_dev0_avdd_vol = 2800000
+csi0_dev0_dvdd = "dvdd-csi-18"
+csi0_dev0_dvdd_vol = 1500000
+csi0_dev0_afvdd = "afvcc-csi"
+csi0_dev0_afvdd_vol = 2800000
+;csi0_dev0_power_en = port:PB04<1><0><1><0>
+csi0_dev0_power_en =
+csi0_dev0_reset = port:PE14<1><0><1><0>
+csi0_dev0_pwdn = port:PE15<1><0><1><0>
+csi0_dev0_flash_used = 0
+csi0_dev0_flash_type = 2
+csi0_dev0_flash_en =
+csi0_dev0_flash_mode =
+csi0_dev0_flvdd = ""
+csi0_dev0_flvdd_vol =
+csi0_dev0_af_pwdn =
+csi0_dev0_act_used = 0
+csi0_dev0_act_name = "ad5820_act"
+csi0_dev0_act_slave = 0x18
+
+[csi0/csi0_dev1]
+csi0_dev1_used = 0
+csi0_dev1_mname = ""
+csi0_dev1_twi_addr = 0x78
+csi0_dev1_pos = "rear"
+csi0_dev1_isp_used = 1
+csi0_dev1_fmt = 0
+csi0_dev1_stby_mode = 0
+csi0_dev1_vflip = 0
+csi0_dev1_hflip = 0
+csi0_dev1_iovdd = "iovdd-csi"
+csi0_dev1_iovdd_vol = 2800000
+csi0_dev1_avdd = "avdd-csi"
+csi0_dev1_avdd_vol = 2800000
+csi0_dev1_dvdd = "dvdd-csi-18"
+csi0_dev1_dvdd_vol = 1500000
+csi0_dev1_afvdd = "afvcc-csi"
+csi0_dev1_afvdd_vol = 2800000
+csi0_dev1_power_en =
+csi0_dev1_reset =
+csi0_dev1_pwdn =
+csi0_dev1_flash_used = 0
+csi0_dev1_flash_type = 2
+csi0_dev1_flash_en =
+csi0_dev1_flash_mode =
+csi0_dev1_flvdd = ""
+csi0_dev1_flvdd_vol =
+csi0_dev1_af_pwdn =
+csi0_dev1_act_used = 0
+csi0_dev1_act_name = "ad5820_act"
+csi0_dev1_act_slave = 0x18
+
+;--------------------------------------------------------------------------------
+;tv configuration
+;
+;--------------------------------------------------------------------------------
+[tvout_para]
+tvout_used =
+tvout_channel_num =
+tv_en =
+
+[tvin_para]
+tvin_used =
+tvin_channel_num =
+
+; ------------------------------------------------------------------------------|
+; de-interlace configuration
+;--------------------------------------------------------------------------------
+[di]
+di_used = 1
+
+;--------------------------------------------------------------------------------
+; SDMMC PINS MAPPING |
+; ------------------------------------------------------------------------------|
+; Config Guide |
+; sdc_used: 1-enable card, 0-disable card |
+; non-removable:if you use as main memory,you should set it,for example eMMC |
+; bus-width: card bus width, 1-1bit, 4-4bit, 8-8bit |
+; sunxi-power-save-mode: if use sdio card,should not set it |
+; vmmc:regulator for card/emmc power |
+; vqmmc:regulator for card/emmc io power |
+; vdmmc:regulator for card detect pin pull up power |
+; other: GPIO Mapping configuration |
+; ------------------------------------------------------------------------------|
+; Note: |
+; |
+; |
+; |
+; |
+; |
+; |
+;--------------------------------------------------------------------------------
+[sdc0]
+sdc0_used = 1
+bus-width = 4
+sdc0_d1 = port:PF00<2><1><2><default>
+sdc0_d0 = port:PF01<2><1><2><default>
+sdc0_clk = port:PF02<2><1><2><default>
+sdc0_cmd = port:PF03<2><1><2><default>
+sdc0_d3 = port:PF04<2><1><2><default>
+sdc0_d2 = port:PF05<2><1><2><default>
+cd-gpios = port:PF06<0><1><2><default>
+sunxi-power-save-mode =
+sunxi-dis-signal-vol-sw =
+vmmc="vcc-sdcv"
+vqmmc="vcc-sdcvq33"
+vdmmc="vcc-sdcvd"
+ctl-spec-caps = 0x80
+
+
+[sdc1]
+sdc1_used = 1
+bus-width = 4
+sdc1_clk = port:PG00<2><1><3><default>
+sdc1_cmd = port:PG01<2><1><3><default>
+sdc1_d0 = port:PG02<2><1><3><default>
+sdc1_d1 = port:PG03<2><1><3><default>
+sdc1_d2 = port:PG04<2><1><3><default>
+sdc1_d3 = port:PG05<2><1><3><default>
+;sunxi-power-save-mode =
+sd-uhs-sdr50 =
+sd-uhs-ddr50 =
+sd-uhs-sdr104 =
+cap-sdio-irq =
+keep-power-in-suspend =
+ignore-pm-notify =
+max-frequency = 150000000
+
+[sdc2]
+sdc2_used = 1
+non-removable =
+bus-width = 8
+sdc2_ds = port:PC01<3><1><3><default>
+sdc2_clk = port:PC04<3><1><3><default>
+sdc2_cmd = port:PC05<3><1><3><default>
+sdc2_d0 = port:PC06<3><1><3><default>
+sdc2_d1 = port:PC07<3><1><3><default>
+sdc2_d2 = port:PC08<3><1><3><default>
+sdc2_d3 = port:PC09<3><1><3><default>
+sdc2_d4 = port:PC10<3><1><3><default>
+sdc2_d5 = port:PC11<3><1><3><default>
+sdc2_d6 = port:PC12<3><1><3><default>
+sdc2_d7 = port:PC13<3><1><3><default>
+sdc2_emmc_rst = port:PC14<3><1><3><default>
+cd-gpios =
+sunxi-power-save-mode =
+sunxi-dis-signal-vol-sw =
+mmc-ddr-1_8v =
+mmc-hs200-1_8v =
+mmc-hs400-1_8v =
+max-frequency = 150000000
+sdc_tm4_sm0_freq0 = 0
+sdc_tm4_sm0_freq1 = 0
+sdc_tm4_sm1_freq0 = 0x00000000
+sdc_tm4_sm1_freq1 = 0
+sdc_tm4_sm2_freq0 = 0x00000000
+sdc_tm4_sm2_freq1 = 0
+sdc_tm4_sm3_freq0 = 0x05000000
+sdc_tm4_sm3_freq1 = 0x00000405
+sdc_tm4_sm4_freq0 = 0x00050000
+sdc_tm4_sm4_freq1 = 0x00000408
+vmmc="vcc-emmcv"
+;vqmmc="vcc-emmcvq33"
+vqmmc="vcc-emmcvq18"
+vdmmc="none"
+
+
+;[mmc3]
+;mmc3_used = 0
+;mmc3_detmode = 2
+;mmc3_buswidth = 4
+;mmc3_clk = port:PA10<2><1><2><default>
+;mmc3_cmd = port:PA09<2><1><2><default>
+;mmc3_d0 = port:PA11<2><1><2><default>
+;mmc3_d1 = port:PA12<2><1><2><default>
+;mmc3_d2 = port:PA13<2><1><2><default>
+;mmc3_d3 = port:PA14<2><1><2><default>
+;mmc3_det =
+;mmc3_use_wp = 0
+;mmc3_wp =
+;mmc3_isio = 0
+;mmc3_regulator = "none"
+
+; ------------------------------------------------------------------------------|
+; sim card configuration
+;--------------------------------------------------------------------------------
+[smc]
+smc_used =
+smc_rst =
+smc_vppen =
+smc_vppp =
+smc_det =
+smc_vccen =
+smc_sck =
+smc_sda =
+
+;-------------------------------------------------------------------------------
+;userspace gpio interface for android
+;----------------------------------------------------------------------------------
+[gpio_para]
+compatible = "allwinner,sunxi-init-gpio"
+gpio_para_used = 1
+gpio_num = 3
+gpio_pin_1 = port:PL07<1><default><default><1>
+gpio_pin_2 = port:PL03<1><default><default><0>
+gpio_pin_3 = port:PL04<1><default><default><0>
+normal_led = "gpio_pin_1"
+standby_led = "gpio_pin_3"
+;network_led = "gpio_pin_3"
+easy_light_used = 1
+normal_led_light = 1
+standby_led_light = 1
+;network_led_light = 1
+
+;--------------------------------
+;[usbc0]: usbc0 configuration.
+;usb_used: usb controller enable. 0-disable, 1-enable.
+;usb_port_type: usb mode. 0-device, 1-host, 2-otg.
+;usb_detect_type: usb hotplug detect mode. 0-none, 1-vbus/id detect, 2-id/dpdm detect.
+;usb_detect_mode: usb otg switch has two config. 0-thread scan, 1-id gpio interrupt.
+;usb_id_gpio: usb id detect IO.
+;usb_det_vbus_gpio: USB DET_VBUS has two config. (1)gpio pin; (2)"axp_ctrl", use axp intf.
+;usb_drv_vbus_gpio: USB DRY_VBUS has two config. (1)gpio pin; (2)"axp_ctrl", use axp intf.
+;--------------------------------
+;--------------------------------
+;--- USB0 CONFIG
+;--------------------------------
+[usbc0]
+usbc0_used = 1
+usb_port_type = 1
+usb_detect_type = 1
+usb_detect_mode = 0
+usb_id_gpio =
+usb_det_vbus_gpio =
+usb_drv_vbus_gpio =
+usb_host_init_state = 1
+usb_regulator_io = "nocare"
+usb_wakeup_suspend = 1
+;--- USB Device
+usb_luns = 3
+usb_serial_unique = 0
+usb_serial_number = "20080411"
+rndis_wceis = 1
+
+;--------------------------------
+;--- USB1 CONFIG
+;--------------------------------
+[usbc1]
+usbc1_used = 1
+usb_drv_vbus_gpio = port:PL05<1><0><default><1>
+usb_host_init_state = 1
+usb_regulator_io = "nocare"
+usb_wakeup_suspend = 1
+
+;--------------------------------
+;--- USB2 CONFIG
+;--------------------------------
+[usbc2]
+usbc2_used = 0
+usb_drv_vbus_gpio =
+usb_host_init_state = 1
+usb_regulator_io = "nocare"
+usb_wakeup_suspend = 1
+
+;--------------------------------
+;--- USB3 CONFIG
+;--------------------------------
+[usbc3]
+usbc3_used = 0
+usb_drv_vbus_gpio =
+usb_host_init_state = 1
+usb_regulator_io = "nocare"
+usb_wakeup_suspend = 1
+
+;--------------------------------
+;--- serial number flag
+;--------------------------------
+[serial_feature]
+sn_filename = "sn.txt"
+
+;--------------------------------------------------------------------------------
+; G sensor configuration
+; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
+;--------------------------------------------------------------------------------
+[gsensor]
+compatible = "allwinner,sun50i-gsensor-para";
+gsensor_used = 0
+gsensor_twi_id = 1
+gsensor_twi_addr = 0x18
+gsensor_int1 = port:PA09<6><1><default><default>
+gsensor_int2 =
+gsensor_vcc_io = "vcc-deviceio"
+gsensor_vcc_io_val = 3100
+
+;--------------------------------------------------------------------------------
+; G sensor automatic detection configuration
+;gsensor_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
+;Module name postposition 1 said detection, 0 means no detection.
+;--------------------------------------------------------------------------------
+[gsensor_list_para]
+compatible = "allwinner,sun50i-gsensor-list-para"
+gsensor_det_used = 0
+lsm9ds0_acc_mag = 1
+bma250 = 1
+mma8452 = 1
+mma7660 = 1
+mma865x = 1
+afa750 = 1
+lis3de_acc = 1
+lis3dh_acc = 1
+kxtik = 1
+dmard10 = 0
+dmard06 = 1
+mxc622x = 1
+fxos8700 = 1
+lsm303d = 0
+
+;--------------------------------------------------------------------------------
+;wlan configuration
+;wlan_used: 0-not use, 1- use
+;wlan_busnum: sdio/usb index
+;clocks: external low power clock input (32.768KHz)
+;wlan_power: input supply voltage
+;wlan_io_regulator: wlan/sdio I/O voltage
+;wlan_regon: power up/down internal regulators used by wifi section
+;wlan_hostwake: wlan to wake-up host
+;--------------------------------------------------------------------------------
+[wlan]
+wlan_used = 1
+wlan_busnum = 1
+wlan_usbnum = 3
+wlan_power1 = "vcc-wifi1"
+wlan_power2 = "vcc-wifi2"
+wlan_io_regulator = "vcc-wifi-io"
+wlan_en =
+wlan_regon = port:PM03<1><default><default><0>
+wlan_hostwake = port:PM00<0><default><default><0>
+
+;--------------------------------------------------------------------------------
+;bluetooth configuration
+;bt_used: 0- no used, 1- used
+;clocks: external low power clock input (32.768KHz)
+;bt_power: input supply voltage
+;bt_io_regulator: bluetooth I/O voltage
+;bt_rst_n: power up/down internal regulators used by BT section
+;--------------------------------------------------------------------------------
+[bt]
+bt_used = 1
+;clocks = "&clk_losc_out"
+;bt_power = "vcc-wifi"
+;bt_io_regulator = "vcc-wifi-io"
+bt_rst_n = port:PM04<1><default><default><0>
+
+;--------------------------------------------------------------------------------
+;bluetooth lpm configuration
+;btlpm_used: 0- no used, 1- used
+;uart_index: 0- uart0, 1- uart1, 2- uart2
+;bt_wake: host wake-up bluetooth device
+;bt_hostwake: bt device wake-up host
+;--------------------------------------------------------------------------------
+[btlpm]
+btlpm_used = 1
+uart_index = 1
+bt_hostwake_enable = 0
+bt_wake = port:PM02<1><default><default><1>
+bt_hostwake = port:PM01<6><default><default><0>
+
+;--------------------------------------------------------------------------------
+;3G configuration
+;--------------------------------------------------------------------------------
+[3g_para]
+3g_para_used = 0
+3g_usbc_num = 2
+3g_uart_num = 0
+bb_vbat = port:PL03<1><default><default><0>
+bb_host_wake = port:PM00<1><default><default><0>
+bb_on = port:PM01<1><default><default><0>
+bb_pwr_on = port:PM03<1><default><default><0>
+bb_wake = port:PM04<1><default><default><0>
+bb_rf_dis = port:PM05<1><default><default><0>
+bb_rst = port:PM06<1><default><default><0>
+3g_int =
+
+;--------------------------------------------------------------------------------
+;gyroscope
+;--------------------------------------------------------------------------------
+[gy_para]
+compatible ="allwinner,sun50i-gyr_sensors-para"
+gy_used = 0
+gy_twi_id = 2
+gy_twi_addr = 0x6a
+gy_int1 = port:PA10<6><1><default><default>
+gy_int2 =
+
+;--------------------------------------------------------------------------------
+; Gyro automatic detection configuration
+;gy_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
+;Module name postposition 1 said detection, 0 means no detection.
+;--------------------------------------------------------------------------------
+[gy_list_para]
+compatible = "allwinner,sun50i-gyr_sensors-list-para"
+gy_det_used = 1
+lsm9ds0_gyr = 1
+l3gd20_gyr = 0
+bmg160_gyr = 1
+
+;--------------------------------------------------------------------------------
+;light sensor
+;--------------------------------------------------------------------------------
+[ls_para]
+compatible = "allwinner,sun50i-lsensors-para"
+ls_used = 0
+ls_twi_id = 2
+ls_twi_addr = 0x23
+ls_int = port:PA12<6><1><default><default>
+
+;--------------------------------------------------------------------------------
+; lsensor automatic detection configuration
+;ls_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
+;Module name postposition 1 said detection, 0 means no detection.
+;--------------------------------------------------------------------------------
+[ls_list_para]
+compatible = "allwinner,sun50i-lsensors-list-para"
+ls_det_used = 1
+ltr_501als = 1
+jsa1212 = 0
+jsa1127 = 1
+
+;--------------------------------------------------------------------------------
+;compass
+;--------------------------------------------------------------------------------
+[compass_para]
+compatible ="allwinner,sun50i-compass-para"
+compass_used = 0
+compass_twi_id = 2
+compass_twi_addr = 0x0d
+compass_int = port:PA11<6><1><default><default>
+
+;--------------------------------------------------------------------------------
+; compass sensor automatic detection configuration
+;compass_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
+;Module name postposition 1 said detection, 0 means no detection.
+;--------------------------------------------------------------------------------
+[compass_list_para]
+compatible ="allwinner,sun50i-compass-list-para"
+compass_det_used = 1
+lsm9ds0 = 1
+lsm303d = 0
+akm8963 = 1
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure dmic_used = 0x1,
+; snddmic_used = 0x1, if register the sound card dmic.
+;---------------------------------------------------------------------------------
+[dmic]
+dmic_used = 0
+[snddmic]
+snddmic_used = 0
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure spdif_used = 0x1,
+; spdifmach_used = 0x1, if register the sound card spdif.
+;--------------------------------------------------------------------------------
+[spdif]
+spdif_used = 1
+[sndspdif]
+sndspdif_used = 1
+;----------------------------------------------------------------------------------
+; NOTE :Make sure audiohdmi_used = 0x1,
+; sndhdmi_used = 0x1, if register the sound card hdmi. Daudio1 used for HDMI
+;---------------------------------------------------------------------------------
+[audiohdmi]
+audiohdmi_used = 1
+[sndhdmi]
+sndhdmi_used = 1
+;---------------------------------------------------------------------------------
+;allwinner,pcm_lrck_period : 16/32/64/128/256
+;allwinner,slot_width_select : 16bits/20bits/24bits/32bits
+;allwinner,daudio_master : 1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master)
+; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) allwinner not use
+; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) allwinner not use
+; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave)
+;allwinner,audio_format : 1: SND_SOC_DAIFMT_I2S(standard i2s format).
+; 2: SND_SOC_DAIFMT_RIGHT_J(right justfied format).
+; 3: SND_SOC_DAIFMT_LEFT_J(left justfied format).
+; 4: SND_SOC_DAIFMT_DSP_A(MSB available on 2nd BCLK rising edge after LRCK rising).
+; 5: SND_SOC_DAIFMT_DSP_B(MSB available on 1nd BCLK rising edge after LRC rising).
+;allwinner,signal_inversion : 1: SND_SOC_DAIFMT_NB_NF(normal bit clock + frame)
+; 2: SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
+; 3: SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM)
+; 4: SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
+;allwinner,frametype : 0: short frame = 1 clock width;
+; 1: long frame = 2 clock width;
+;allwinner,tdm_config : 0: pcm
+; 1: i2s
+;allwinner,mclk_div : 0: not output(normal setting this) 1/2/4/6/8/12/16/24/32/48/64/96/128/176/192:
+; setting mclk as input clock to external codec, freq is pll_audio/mclk_div
+;allwinner,daudio0_used : 0: not use
+; 1: use
+;--------------------------------------------------------------------------------
+; NOTE :Make sure sndhub_used = 0x1,
+; ahub_daudio0_used = 0x1, if register the sound card AHUB DAUDIO0.
+;--------------------------------------------------------------------------------
+[sndahub]
+sndahub_used = 1
+
+;-----------------------------------------------------------------------------
+[ahub_daudio0]
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x00
+ahub_daudio0_used = 0
+
+;-----------------------------------------------------------------------------
+[ahub_daudio1]
+pcm_lrck_period = 0x20
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x01
+ahub_daudio1_used = 1
+
+;-----------------------------------------------------------------------------
+[ahub_daudio2]
+pcm_lrck_period = 0x20
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x01
+ahub_daudio2_used = 1
+
+;-----------------------------------------------------------------------------
+[ahub_daudio3]
+pcm_lrck_period = 0x20
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x04
+ahub_daudio3_used = 1
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure snddaudio0_used = 0x1,
+; daudio0_used = 0x1, if register the sound card DAUDIO0.
+;--------------------------------------------------------------------------------
+[snddaudio0]
+snddaudio0_used = 0
+;-----------------------------------------------------------------------------
+[daudio0]
+pcm_lrck_period = 0x20
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x00
+daudio0_used = 0
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure snddaudio2_used = 0x1,
+; daudio2_used = 0x1, if register the sound card DAUDIO2.
+;--------------------------------------------------------------------------------
+[snddaudio2]
+snddaudio2_used = 1
+;-----------------------------------------------------------------------------
+[daudio2]
+pcm_lrck_period = 0x40
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x04
+signal_inversion = 0x03
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x01
+daudio2_used = 1
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure snddaudio3_used = 0x1,
+; daudio3_used = 0x1, if register the Daudio3 used for ACX00 codec card
+;--------------------------------------------------------------------------------
+[snddaudio3]
+snddaudio3_used = 1
+;-----------------------------------------------------------------------------
+[daudio3]
+pcm_lrck_period = 0x20
+slot_width_select = 0x20
+daudio_master = 0x04
+audio_format = 0x01
+signal_inversion = 0x01
+frametype = 0x00
+tdm_config = 0x01
+mclk_div = 0x01
+daudio3_used = 1
+
+;--------------------------------------------------------------------------------
+; NOTE :Make sure ac200_codec = 0x1,
+; if register the acx00-codec running for audio output
+;--------------------------------------------------------------------------------
+[ac200_codec]
+ac200_codec_used = 1
+gpio-spk = port:PL06<1><1><default><default>
+
+;--------------------------------------------------------------------------------
+;ir --- infra remote configuration
+;ir_protocol_used : 0 = NEC / 1 = RC5
+;--------------------------------------------------------------------------------
+[s_cir0]
+s_cir0_used = 1
+ir_protocol_used = 0
+ir_power_key_code0 = 0x40
+ir_addr_code0 = 0xfe01
+ir_power_key_code1 = 0x00
+ir_addr_code1 = 0x1dcc
+ir_power_key_code2 = 0x40
+ir_addr_code2 = 0xff00
+ir_power_key_code3 = 0x1c
+ir_addr_code3 = 0xdf00
+ir_power_key_code4 = 0x4d
+ir_addr_code4 = 0x4040
+ir_power_key_code5 = 0x03
+ir_addr_code5 = 0x00EF
+
+
+
+rc5_ir_power_key_code0 = 0x01
+rc5_ir_addr_code0 = 0x04
+
+;--------------------------------------------------------------------------------------------------------
+;compatible ---pmu0 name, axpdummy is a dummy axp
+;used ---0:not used,1:used
+;pmu_id ---if bit7 is 1, then is a dummy axp; else 0:axp19x,1:axp209,2:axp22x,3:axp806,4:axp808,5:axp809,6:axp803,7:axp813,8:axp157
+;--------------------------------------------------------------------------------------------------------
+[pmu0]
+pmu0_used = 1
+compatible = "axpdummy"
+pmu_id = 0x83
+
+;--------------------------------------------------------------------------------------------------------
+;pmu_bat_unused ---0:used,1: charger unsupported on this pmu
+;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
+;power_start ---when system is in charging, shutdown is power off or resart;0:restart 1:poweroff
+;--------------------------------------------------------------------------------------------------------
+[charger0]
+charger0_used = 1
+pmu_bat_unused = 1
+pmu_pwroff_vol = 3300
+power_start = 0
+
+;--------------------------------------------------------------------------------------------------------
+;compatible ---powerkey0 name, support:axp806-powerkey
+;pmu_powkey_off_time ---set pek off time,ms, 4000/6000/8000/10000
+;pmu_powkey_off_func ---set pek off func, 0:shutdown,1:restart
+;pmu_powkey_off_en ---set pek offlevel powerdown or not, 0:not powerdown,1:powerdown
+;pmu_powkey_long_time ---set pek pek long irq time,ms,1000/1500/2000/2500
+;pmu_powkey_on_time ---set pek on time,ms,128/1000/2000/3000
+;--------------------------------------------------------------------------------------------------------
+[powerkey0]
+powerkey0_used = 0
+compatible = "axp806-powerkey"
+pmu_powkey_off_time = 6000
+pmu_powkey_off_func = 0
+pmu_powkey_off_en = 1
+pmu_powkey_long_time = 1500
+pmu_powkey_on_time = 1000
+
+;--------------------------------------------------------------------------------------------------------
+;compatible ---regulator0 name, support:axpdummy-regulator
+;regulator_count ---pmu ldo count, changed with different pmu
+;regulator(1~regulator_count) ---ldo details
+;--------------------------------------------------------------------------------------------------------
+[regulator0]
+compatible = "axpdummy-regulator"
+regulator_count = 7
+regulator1 = "axpdummy_ldo1 none vdd-cpua"
+regulator2 = "axpdummy_ldo2 none vdd-gpu vdd-sys vdd-hdmi vdd-usb vdd-pcie"
+regulator3 = "axpdummy_ldo3 none vcc-dram"
+regulator4 = "axpdummy_ldo4 none vcc-pl vcc-led vcc-ir vcc-io vcc-audio-33 vcc-pg vcc-pm ac-ldoin vcc-wifi1 vcc-wifi2 vcc-wifi-io vcc-tv vcc-emmc-33 vcc-emmcv vcc-emmcvq18 vcc-sdcv vcc-sdcvq33 vcc-sdcvd"
+regulator5 = "axpdummy_ldo5 none vcc-5v"
+regulator6 = "axpdummy_ldo6 none vcc-rtc vdd18-lpddr vcc-usb usb-dvdd vcc-ts vcc-ephy vcc-pcie-slot vdd-dram-18 vdd-bias vcc-emmc-18 vcc-card vcc-pd vcc-uart vcc-camera-33"
+regulator7 = "axpdummy_ldo7 none vdd18-dram vcc18-bias vcc-pll vcc-hdmi vcc-pc vdd-efuse vccio-dcxo"
+
+;----------------------------------------------------------------------------------
+; dvfs voltage-frequency table configuration
+;
+; max_freq: cpu maximum frequency, based on Hz
+; min_freq: cpu minimum frequency, based on Hz
+;
+; lv_count: count of lv_freq/lv_volt, must be < 16
+;
+; cpu dvfs driver will choose dvfs_table_x according to different cpu
+;
+;----------------------------------------------------------------------------------
+[dvfs_table_0]
+max_freq = 1800000000
+min_freq = 480000000
+
+lv_count = 8
+lv1_freq = 1800000000
+lv1_volt = 1160
+
+lv2_freq = 1488000000
+lv2_volt = 1060
+
+lv3_freq = 1320000000
+lv3_volt = 1000
+
+lv4_freq = 1080000000
+lv4_volt = 940
+
+lv5_freq = 888000000
+lv5_volt = 880
+
+lv6_freq = 0
+lv6_volt = 880
+
+lv7_freq = 0
+lv7_volt = 880
+
+lv8_freq = 0
+lv8_volt = 880
+
+[dvfs_table_1]
+max_freq = 1800000000
+min_freq = 480000000
+
+lv_count = 8
+lv1_freq = 1800000000
+lv1_volt = 1100
+
+lv2_freq = 1488000000
+lv2_volt = 1000
+
+lv3_freq = 1320000000
+lv3_volt = 940
+
+lv4_freq = 1080000000
+lv4_volt = 880
+
+lv5_freq = 888000000
+lv5_volt = 820
+
+lv6_freq = 0
+lv6_volt = 820
+
+lv7_freq = 0
+lv7_volt = 820
+
+lv8_freq = 0
+lv8_volt = 820
+
+[dvfs_table_2]
+max_freq = 1800000000
+min_freq = 480000000
+
+lv_count = 8
+lv1_freq = 1800000000
+lv1_volt = 1060
+
+lv2_freq = 1488000000
+lv2_volt = 960
+
+lv3_freq = 1320000000
+lv3_volt = 900
+
+lv4_freq = 1080000000
+lv4_volt = 840
+
+lv5_freq = 888000000
+lv5_volt = 800
+
+lv6_freq = 0
+lv6_volt = 800
+
+lv7_freq = 0
+lv7_volt = 800
+
+lv8_freq = 0
+lv8_volt = 800
+
+;----------------------------------------------------------------------------------
+;s_uart0 config parameters
+;s_uart0_used --s_uart0 whether used for arisc debugging
+;
+;----------------------------------------------------------------------------------
+[s_uart0]
+s_uart0_used = 0
+s_uart0_tx = port:PL02<2><default><default><default>
+s_uart0_rx = port:PL03<2><default><default><default>
+
+;----------------------------------------------------------------------------------
+;s_rsb0 config parameters
+;s_rsb0_used --s_rsb0 whether used for arisc
+;
+;----------------------------------------------------------------------------------
+[s_rsb0]
+s_rsb0_used = 0
+s_rsb0_sck = port:PL00<2><1><2><default>
+s_rsb0_sda = port:PL01<2><1><2><default>
+
+;----------------------------------------------------------------------------------
+;s_jtag0 config parameters
+;s_jtag0_used --s_jtag0 whether used for arisc
+;
+;----------------------------------------------------------------------------------
+[s_jtag0]
+s_jtag0_used = 0
+s_jtag0_tms = port:PL04<2><1><2><default>
+s_jtag0_tck = port:PL05<2><1><2><default>
+s_jtag0_tdo = port:PL06<2><1><2><default>
+s_jtag0_tdi = port:PL07<2><1><2><default>
+
+;----------------------------------------------------------------------------------
+;virtual device
+;virtual device for pinctrl testing
+;device have pin PA1 PA2
+;----------------------------------------------------------------------------------
+[Vdevice]
+Vdevice_used = 0
+Vdevice_0 = port:PH09<5><1><2><default>
+Vdevice_1 = port:PH10<5><1><2><default>
+
+;----------------------------------------------------------------------------------
+;GPU parameters
+;independent_power: if GPU owns a power independently, this should be true.
+;gpu_idle : GPU idle, if this is enabled, GPU will be powered off when it is idle.
+;dvfs_status : dvfs status, if this is enabled, GPU DVFS will work. Actually, GPU
+; DVFS functionality depends on some kernel features such as devfreq.
+;temp_ctrl_status : temperature control status, if this is enabled, the gpu frequency
+; will drop down if the temperature of gpu is too high.
+;scene_ctrl_status: scene control status, if this is enabled, android layer can ask
+; gpu driver to change frequency in certain scene.
+;max_normal_level : restrict the level for normal mode.
+;----------------------------------------------------------------------------------
+[gpu]
+independent_power = 0
+gpu_idle = 0
+dvfs_status = 1
+temp_ctrl_status = 1
+scene_ctrl_status = 1
+max_normal_level = 13
+
+;---------------------------------------------------------------------------------
+; used 1: box 0:pad
+; start_type 1: start system directly when power supply 0: wait IR/KEY to power on
+; irkey_used 1: ir key used 0: not
+; pmukey_used 1: physical button used, 0: not, the key is link to PMU PWROK
+;---------------------------------------------------------------------------------
+[box_start_os]
+used = 1
+start_type = 1
+irkey_used = 1
+pmukey_used = 0
+
+;---------------------------------------------------------------------------------
+; the module used when box_start_os is used, the this module is to support on/off
+; led when box into box standby, the gpio is only support PL and AXP gpio(0/1)
+;---------------------------------------------------------------------------------
+[box_standby_led]
+gpio0 = port:PL07<1><default><default><0>
+gpio1 = port:PL03<1><default><default><1>
+gpio2 = port:PL04<1><default><default><1>
+
+;--------------------------------------------------------------------------------
+;gpio power key
+;key_io:the config of PL/PM pin.
+;trigger_mode: low-level trigger :0 high-level trigger:1
+;
+;For example: if key_io is PL04, then the key_index must be 4.
+;--------------------------------------------------------------------------------
+[gpio_power_key]
+compatible = "allwinner,sunxi-gpio-power-key"
+device_type = "gpio_power_key"
+gpio_power_key_used = 0
+key_io = port:PL05<0><default><default><0>
+trigger_mode = 1
+
+;add by louis for fd655
+[fd655_key]
+compatible = "rockchip,fd655_dev"
+clk_pin = port:PH03<0><default><default><0>
+dat_pin = port:PD26<0><default><default><0>
+
+[auto_print]
+auto_print_used = 0
--
2.39.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] add Eachlink H6 Mini
2025-05-08 14:34 [PATCH] add Eachlink H6 Mini Shivam Gupta
@ 2025-05-08 15:25 ` Andre Przywara
[not found] ` <SJ1PR12MB6313678B38CB96D3C24FECE5A08BA@SJ1PR12MB6313.namprd12.prod.outlook.com>
0 siblings, 1 reply; 5+ messages in thread
From: Andre Przywara @ 2025-05-08 15:25 UTC (permalink / raw)
To: Shivam Gupta; +Cc: linux-sunxi, hundertzwei
On Thu, 8 May 2025 20:04:11 +0530
Shivam Gupta <gupta.shivam1996@gmail.com> wrote:
Hi,
> From: hundertzwei <46927478+hundertzwei@users.noreply.github.com>
>
> extracted from miniH6-public-3Gddr-20181113-update.img
> ---
what repository is this against? I guess sunxi-boards.git on
github.com/linux-sunxi?
This doesn't use an email based contribution process, so please send a
pull-request via github.
Not sure how useful a FEX file for an H6 based device is anyway, but I
guess it doesn't hurt...
Cheers,
Andre.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] add Eachlink H6 Mini
[not found] ` <SJ1PR12MB6313678B38CB96D3C24FECE5A08BA@SJ1PR12MB6313.namprd12.prod.outlook.com>
@ 2025-05-08 16:05 ` Andre Przywara
[not found] ` <SJ1PR12MB6313123CC3D9C79C9E51BF93A090A@SJ1PR12MB6313.namprd12.prod.outlook.com>
0 siblings, 1 reply; 5+ messages in thread
From: Andre Przywara @ 2025-05-08 16:05 UTC (permalink / raw)
To: Shivam Gupta; +Cc: linux-sunxi@lists.linux.dev
On Thu, 8 May 2025 15:41:34 +0000
Shivam Gupta <gupta.shivam1996@gmail.com> wrote:
> Hi,
> While following the instructions to the letter on
> https://linux-sunxi.org/New_Device_howto, I sent the wrong patch. Wanted
> to add a fex file for an A10 tablet (https://linux-sunxi.org/Softwinners_crane)
> It's the next patch I sent after that.
Ah, I see. Unfortunately those instructions are somewhat outdated. I don't
think sunxi-boards is really maintained anymore, at best FEX files are
somewhat irrelevant for mainline, even Allwinner seems to have dropped
that ball many years ago.
> As a beginner I did exactly what it said, git add and send patch, but
> didn't git commit as it didn't say that anywhere, I'm sorry for that.
Yeah, I see that it proposes to send a patch to the list. Which is
somewhat pointless, as it's a github based repo, so it should follow that
process there.
> For an A10 tablet, should I still send a pull request over github or the
> email method is fine?
For that old tablet I think you can push the FEX file, via a Github PR,
though I don't know many people care about this still.
If your aim is to run (mainline) Linux, you would need a devicetree file
anyway. You can use the information in the FEX to create or generate one.
Cheers,
Andre
> https://lore.kernel.org/linux-sunxi/20250508150811.7046-1-gupta.shivam1996@gmail.com/T/#u
>
> Thanks,
>
> Shivam
>
> ________________________________
> From: Andre Przywara <andre.przywara@arm.com>
> Sent: Thursday, May 8, 2025 8:55:30 pm
> To: Shivam Gupta <gupta.shivam1996@gmail.com>
> Cc: linux-sunxi@lists.linux.dev <linux-sunxi@lists.linux.dev>;
> hundertzwei <46927478+hundertzwei@users.noreply.github.com> Subject: Re:
> [PATCH] add Eachlink H6 Mini
>
> On Thu, 8 May 2025 20:04:11 +0530
> Shivam Gupta <gupta.shivam1996@gmail.com> wrote:
>
> Hi,
>
> > From: hundertzwei <46927478+hundertzwei@users.noreply.github.com>
> >
> > extracted from miniH6-public-3Gddr-20181113-update.img
> > ---
>
> what repository is this against? I guess sunxi-boards.git on
> github.com/linux-sunxi?
>
> This doesn't use an email based contribution process, so please send a
> pull-request via github.
>
> Not sure how useful a FEX file for an H6 based device is anyway, but I
> guess it doesn't hurt...
>
> Cheers,
> Andre.
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] add Eachlink H6 Mini
[not found] ` <SJ1PR12MB6313123CC3D9C79C9E51BF93A090A@SJ1PR12MB6313.namprd12.prod.outlook.com>
@ 2025-05-15 9:23 ` Andre Przywara
2025-05-15 13:15 ` Shivam Gupta
0 siblings, 1 reply; 5+ messages in thread
From: Andre Przywara @ 2025-05-15 9:23 UTC (permalink / raw)
To: Shivam Gupta; +Cc: linux-sunxi@lists.linux.dev
Hi Shivam,
On 15/05/2025 07:44, Shivam Gupta wrote:
> Hi,
> After I extracted the fex file, kernel modules and DRAM details for an
> old (previously undocumented) A10 tablet (https://linux-sunxi.org/
> Softwinners_crane), I am unable to proceed further with u-boot or kernel
> compilation as it seems to need a dts. Can someone help me with this? I
> spent many days trying to write a dts based on similar devices, but I
> don’t have enough understanding of this.
So what did you try yet? I think the most complete A10 tablet in
mainline is probably sun4i-a10-topwise-a721.dts, as this describes both
the panel and touch.
You should copy that file, then go through it and check if you can find
the respective settings in the FEX file.
For instance it looks like the touchscreen is the same, also using the
same parameters like I2C address and interrupt, so you can keep that. SD
card (MMC0) and UART0 also looks the same.
If in doubt comment or remove other nodes in the DT, then give it a try,
to see how far you come. I'd recommend using serial, as this has a much
higher chance of success or at least some output.
> The fex file can be found here:
> https://github.com/linux-sunxi/sunxi-boards/pull/72/files
>
> Another problem I am facing is that the device boots from NAND by
> default so it does not boot from my SD card. How do I get around that?
Are you sure? I think most devices boot from SD card if they find the
right magic sector on it, bypassing internal boot media like NAND or
eMMC. So what have you tried, exactly? You would need to build a U-Boot
image, then "dd" that to sector 16 of an SD card. If you have serial
connected, that should already give you some output, even without the DT
being fully correct.
Please provide more details like the .dts that you created so far if you
need more help.
Cheers,
Andre
> Please help with this so I can get something up and running.
>
> Thanks,
>
> Shivam
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] add Eachlink H6 Mini
2025-05-15 9:23 ` Andre Przywara
@ 2025-05-15 13:15 ` Shivam Gupta
0 siblings, 0 replies; 5+ messages in thread
From: Shivam Gupta @ 2025-05-15 13:15 UTC (permalink / raw)
To: Andre Przywara; +Cc: linux-sunxi@lists.linux.dev
Hi Andre,
Here is the defconfig file I used:
https://drive.google.com/file/d/1-XhF-EVcpj7hQAI9HC4XnS8pW4_qtrE6/view?usp=sharing
And here is the dts file I used, based on the Hyundai A7 file
(https://linux-sunxi.org/Hyundai_A7):
https://drive.google.com/file/d/1wBzdUPdZcYzkj61bfAc4hyjE68G2x6v8/view?usp=sharing
I did realise yesterday that the A721 is quite similar but could not
try compiling for that, but I will do that right away.
As for booting, I did follow instructions here:
https://linux-sunxi.org/Bootable_SD_card
And created 2 partitions and wrote the images, but when I tried to
boot, it went to android instead. I then tried using sunxi tools to
boot over USB using the same boot image, in which case the screen
flashed white for one second and then went dark. From lsusb on the
terminal I saw that the device is still in FEL mode so assumed that it
has not booted into u-boot.
As for serial access, I have not done that yet as it would require
soldering on the back of the board, so I am looking to avoid that.
Hope this information helps.
Thanks,
Shivam Gupta
+91-9591952784
Shivam Gupta
+91-9591952784
On Thu, 15 May 2025 at 14:53, Andre Przywara <andre.przywara@arm.com> wrote:
>
> Hi Shivam,
>
> On 15/05/2025 07:44, Shivam Gupta wrote:
> > Hi,
> > After I extracted the fex file, kernel modules and DRAM details for an
> > old (previously undocumented) A10 tablet (https://linux-sunxi.org/
> > Softwinners_crane), I am unable to proceed further with u-boot or kernel
> > compilation as it seems to need a dts. Can someone help me with this? I
> > spent many days trying to write a dts based on similar devices, but I
> > don’t have enough understanding of this.
>
> So what did you try yet? I think the most complete A10 tablet in
> mainline is probably sun4i-a10-topwise-a721.dts, as this describes both
> the panel and touch.
> You should copy that file, then go through it and check if you can find
> the respective settings in the FEX file.
> For instance it looks like the touchscreen is the same, also using the
> same parameters like I2C address and interrupt, so you can keep that. SD
> card (MMC0) and UART0 also looks the same.
> If in doubt comment or remove other nodes in the DT, then give it a try,
> to see how far you come. I'd recommend using serial, as this has a much
> higher chance of success or at least some output.
>
> > The fex file can be found here:
> > https://github.com/linux-sunxi/sunxi-boards/pull/72/files
> >
> > Another problem I am facing is that the device boots from NAND by
> > default so it does not boot from my SD card. How do I get around that?
>
> Are you sure? I think most devices boot from SD card if they find the
> right magic sector on it, bypassing internal boot media like NAND or
> eMMC. So what have you tried, exactly? You would need to build a U-Boot
> image, then "dd" that to sector 16 of an SD card. If you have serial
> connected, that should already give you some output, even without the DT
> being fully correct.
>
> Please provide more details like the .dts that you created so far if you
> need more help.
>
> Cheers,
> Andre
>
> > Please help with this so I can get something up and running.
> >
> > Thanks,
> >
> > Shivam
> >
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-05-15 13:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-05-08 14:34 [PATCH] add Eachlink H6 Mini Shivam Gupta
2025-05-08 15:25 ` Andre Przywara
[not found] ` <SJ1PR12MB6313678B38CB96D3C24FECE5A08BA@SJ1PR12MB6313.namprd12.prod.outlook.com>
2025-05-08 16:05 ` Andre Przywara
[not found] ` <SJ1PR12MB6313123CC3D9C79C9E51BF93A090A@SJ1PR12MB6313.namprd12.prod.outlook.com>
2025-05-15 9:23 ` Andre Przywara
2025-05-15 13:15 ` Shivam Gupta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox