From: Andre Przywara <andre.przywara@arm.com>
To: Lee Jones <lee@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Samuel Holland <samuel@sholland.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH 3/3] regulator: axp20x: add support for the AXP318W
Date: Thu, 14 Aug 2025 00:53:30 +0100 [thread overview]
Message-ID: <20250813235330.24263-4-andre.przywara@arm.com> (raw)
In-Reply-To: <20250813235330.24263-1-andre.przywara@arm.com>
The X-Powers AXP318W is a typical PMIC from X-Powers, featuring nine
DC/DC converters and 28 LDOs, on the regulator side.
Describe the chip's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.
We use just "318" for the internal identifiers, for easier typing and
less churn. If something else other than the "AXP318W" shows up, that's
an easy change, externally visible strings carry the additional letter
already.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/regulator/axp20x-regulator.c | 159 +++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 41 +++++++
2 files changed, 200 insertions(+)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index da891415efc0b..eb2c45b5b9eb0 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -138,6 +138,15 @@
#define AXP313A_DCDC_V_OUT_MASK GENMASK(6, 0)
#define AXP313A_LDO_V_OUT_MASK GENMASK(4, 0)
+#define AXP318_DCDC1_V_OUT_MASK GENMASK(4, 0)
+#define AXP318_DCDC2_V_OUT_MASK GENMASK(6, 0)
+#define AXP318_LDO_V_OUT_MASK GENMASK(4, 0)
+#define AXP318_ELDO_V_OUT_MASK GENMASK(5, 0)
+#define AXP318_DCDC2_NUM_VOLTAGES 88
+#define AXP318_DCDC6_NUM_VOLTAGES 128
+#define AXP318_DCDC7_NUM_VOLTAGES 103
+#define AXP318_DCDC8_NUM_VOLTAGES 119
+
#define AXP717_DCDC1_NUM_VOLTAGES 88
#define AXP717_DCDC2_NUM_VOLTAGES 107
#define AXP717_DCDC3_NUM_VOLTAGES 103
@@ -765,6 +774,151 @@ static const struct regulator_desc axp313a_regulators[] = {
AXP_DESC_FIXED(AXP313A, RTC_LDO, "rtc-ldo", "vin1", 1800),
};
+static const struct linear_range axp318_dcdc2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
+ REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
+};
+
+static const struct linear_range axp318_dcdc6_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
+ REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
+ REGULATOR_LINEAR_RANGE(1800000, 88, 118, 20000),
+ REGULATOR_LINEAR_RANGE(2440000, 119, 127, 40000),
+};
+
+static const struct linear_range axp318_dcdc7_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
+ REGULATOR_LINEAR_RANGE(1220000, 71, 102, 20000),
+};
+
+static const struct linear_range axp318_dcdc8_ranges[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
+ REGULATOR_LINEAR_RANGE(1220000, 71, 102, 20000),
+ REGULATOR_LINEAR_RANGE(1900000, 103, 118, 100000),
+};
+
+static const struct regulator_desc axp318_regulators[] = {
+ AXP_DESC(AXP318, DCDC1, "dcdc1", "vin1", 1000, 3400, 100,
+ AXP318_DCDC1_CONTROL, AXP318_DCDC1_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(0)),
+ AXP_DESC_RANGES(AXP318, DCDC2, "dcdc2", "vin2",
+ axp318_dcdc2_ranges, AXP318_DCDC2_NUM_VOLTAGES,
+ AXP318_DCDC2_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(1)),
+ AXP_DESC_RANGES(AXP318, DCDC3, "dcdc3", "vin3",
+ axp318_dcdc2_ranges, AXP318_DCDC2_NUM_VOLTAGES,
+ AXP318_DCDC3_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(2)),
+ AXP_DESC_RANGES(AXP318, DCDC4, "dcdc4", "vin4",
+ axp318_dcdc2_ranges, AXP318_DCDC2_NUM_VOLTAGES,
+ AXP318_DCDC4_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(3)),
+ AXP_DESC_RANGES(AXP318, DCDC5, "dcdc5", "vin5",
+ axp318_dcdc2_ranges, AXP318_DCDC2_NUM_VOLTAGES,
+ AXP318_DCDC5_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(4)),
+ AXP_DESC_RANGES(AXP318, DCDC6, "dcdc6", "vin6",
+ axp318_dcdc6_ranges, AXP318_DCDC6_NUM_VOLTAGES,
+ AXP318_DCDC6_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(5)),
+ AXP_DESC_RANGES(AXP318, DCDC7, "dcdc7", "vin7",
+ axp318_dcdc7_ranges, AXP318_DCDC7_NUM_VOLTAGES,
+ AXP318_DCDC7_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(6)),
+ AXP_DESC_RANGES(AXP318, DCDC8, "dcdc8", "vin8",
+ axp318_dcdc8_ranges, AXP318_DCDC8_NUM_VOLTAGES,
+ AXP318_DCDC8_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL1, BIT(7)),
+ AXP_DESC_RANGES(AXP318, DCDC9, "dcdc9", "vin9",
+ axp318_dcdc8_ranges, AXP318_DCDC8_NUM_VOLTAGES,
+ AXP318_DCDC9_CONTROL, AXP318_DCDC2_V_OUT_MASK,
+ AXP318_DCDC_OUTPUT_CONTROL2, BIT(0)),
+ AXP_DESC(AXP318, ALDO1, "aldo1", "aldo156in", 500, 3400, 100,
+ AXP318_ALDO1_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(0)),
+ AXP_DESC(AXP318, ALDO2, "aldo2", "aldo234in", 500, 3400, 100,
+ AXP318_ALDO2_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(1)),
+ AXP_DESC(AXP318, ALDO3, "aldo3", "aldo234in", 500, 3400, 100,
+ AXP318_ALDO3_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(2)),
+ AXP_DESC(AXP318, ALDO4, "aldo4", "aldo234in", 500, 3400, 100,
+ AXP318_ALDO4_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(3)),
+ AXP_DESC(AXP318, ALDO5, "aldo5", "aldo156in", 500, 3400, 100,
+ AXP318_ALDO5_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(4)),
+ AXP_DESC(AXP318, ALDO6, "aldo6", "aldo156in", 500, 3400, 100,
+ AXP318_ALDO6_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(5)),
+ AXP_DESC(AXP318, BLDO1, "bldo1", "bldoin", 500, 3400, 100,
+ AXP318_BLDO1_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(6)),
+ AXP_DESC(AXP318, BLDO2, "bldo2", "bldoin", 500, 3400, 100,
+ AXP318_BLDO2_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL1, BIT(7)),
+ AXP_DESC(AXP318, BLDO3, "bldo3", "bldoin", 500, 3400, 100,
+ AXP318_BLDO3_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(0)),
+ AXP_DESC(AXP318, BLDO4, "bldo4", "bldoin", 500, 3400, 100,
+ AXP318_BLDO4_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(1)),
+ AXP_DESC(AXP318, BLDO5, "bldo5", "bldoin", 500, 3400, 100,
+ AXP318_BLDO5_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(2)),
+ AXP_DESC(AXP318, CLDO1, "cldo1", "cldoin", 500, 3400, 100,
+ AXP318_CLDO1_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(3)),
+ AXP_DESC(AXP318, CLDO2, "cldo2", "cldoin", 500, 3400, 100,
+ AXP318_CLDO2_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(4)),
+ AXP_DESC(AXP318, CLDO3, "cldo3", "cldoin", 500, 3400, 100,
+ AXP318_CLDO3_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(5)),
+ AXP_DESC(AXP318, CLDO4, "cldo4", "cldoin", 500, 3400, 100,
+ AXP318_CLDO4_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(6)),
+ AXP_DESC(AXP318, CLDO5, "cldo5", "cldoin", 500, 3400, 100,
+ AXP318_CLDO5_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL2, BIT(7)),
+ AXP_DESC(AXP318, DLDO1, "dldo1", "dldoin", 500, 3400, 100,
+ AXP318_DLDO1_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(0)),
+ AXP_DESC(AXP318, DLDO2, "dldo2", "dldoin", 500, 3400, 100,
+ AXP318_DLDO2_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(1)),
+ AXP_DESC(AXP318, DLDO3, "dldo3", "dldoin", 500, 3400, 100,
+ AXP318_DLDO3_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(2)),
+ AXP_DESC(AXP318, DLDO4, "dldo4", "dldoin", 500, 3400, 100,
+ AXP318_DLDO4_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(3)),
+ AXP_DESC(AXP318, DLDO5, "dldo5", "dldoin", 500, 3400, 100,
+ AXP318_DLDO5_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(4)),
+ AXP_DESC(AXP318, DLDO6, "dldo6", "dldoin", 500, 3400, 100,
+ AXP318_DLDO6_CONTROL, AXP318_LDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(5)),
+ AXP_DESC(AXP318, ELDO1, "eldo1", "eldoin", 500, 1500, 25,
+ AXP318_ELDO1_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(6)),
+ AXP_DESC(AXP318, ELDO2, "eldo2", "eldoin", 500, 1500, 25,
+ AXP318_ELDO2_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL3, BIT(7)),
+ AXP_DESC(AXP318, ELDO3, "eldo3", "eldoin", 500, 1500, 25,
+ AXP318_ELDO3_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL4, BIT(0)),
+ AXP_DESC(AXP318, ELDO4, "eldo4", "eldoin", 500, 1500, 25,
+ AXP318_ELDO4_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL4, BIT(1)),
+ AXP_DESC(AXP318, ELDO5, "eldo5", "eldoin", 500, 1500, 25,
+ AXP318_ELDO5_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL4, BIT(2)),
+ AXP_DESC(AXP318, ELDO6, "eldo6", "eldoin", 500, 1500, 25,
+ AXP318_ELDO6_CONTROL, AXP318_ELDO_V_OUT_MASK,
+ AXP318_LDO_OUTPUT_CONTROL4, BIT(3)),
+};
+
static const struct linear_range axp717_dcdc1_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
@@ -1347,6 +1501,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
step = 150;
break;
case AXP313A_ID:
+ case AXP318_ID:
case AXP323_ID:
case AXP717_ID:
case AXP15060_ID:
@@ -1585,6 +1740,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp313a_regulators;
nregulators = AXP313A_REG_ID_MAX;
break;
+ case AXP318_ID:
+ regulators = axp318_regulators;
+ nregulators = AXP318_REG_ID_MAX;
+ break;
case AXP717_ID:
regulators = axp717_regulators;
nregulators = AXP717_REG_ID_MAX;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index a871789f6cfa9..f4217c4763669 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -559,6 +559,47 @@ enum {
AXP313A_REG_ID_MAX,
};
+enum {
+ AXP318_DCDC1 = 0,
+ AXP318_DCDC2,
+ AXP318_DCDC3,
+ AXP318_DCDC4,
+ AXP318_DCDC5,
+ AXP318_DCDC6,
+ AXP318_DCDC7,
+ AXP318_DCDC8,
+ AXP318_DCDC9,
+ AXP318_ALDO1,
+ AXP318_ALDO2,
+ AXP318_ALDO3,
+ AXP318_ALDO4,
+ AXP318_ALDO5,
+ AXP318_ALDO6,
+ AXP318_BLDO1,
+ AXP318_BLDO2,
+ AXP318_BLDO3,
+ AXP318_BLDO4,
+ AXP318_BLDO5,
+ AXP318_CLDO1,
+ AXP318_CLDO2,
+ AXP318_CLDO3,
+ AXP318_CLDO4,
+ AXP318_CLDO5,
+ AXP318_DLDO1,
+ AXP318_DLDO2,
+ AXP318_DLDO3,
+ AXP318_DLDO4,
+ AXP318_DLDO5,
+ AXP318_DLDO6,
+ AXP318_ELDO1,
+ AXP318_ELDO2,
+ AXP318_ELDO3,
+ AXP318_ELDO4,
+ AXP318_ELDO5,
+ AXP318_ELDO6,
+ AXP318_REG_ID_MAX,
+};
+
enum {
AXP717_DCDC1 = 0,
AXP717_DCDC2,
--
2.46.3
next prev parent reply other threads:[~2025-08-13 23:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 23:53 [RFC PATCH 0/3] regulator: Add X-Powers AXP318W PMIC support Andre Przywara
2025-08-13 23:53 ` [RFC PATCH 1/3] dt-bindings: mfd: x-powers,axp152: Document AXP318W Andre Przywara
2025-08-20 19:50 ` Rob Herring (Arm)
2025-08-13 23:53 ` [RFC PATCH 2/3] mfd: axp20x: Add support for AXP318W PMIC Andre Przywara
2025-09-02 13:36 ` Lee Jones
2025-08-13 23:53 ` Andre Przywara [this message]
2025-08-19 13:36 ` [RFC PATCH 3/3] regulator: axp20x: add support for the AXP318W Yixun Lan
2025-10-21 11:17 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250813235330.24263-4-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox