From: Pablo Mazzini <pmazzini@gmail.com>
To: Andre Przywara <andre.przywara@arm.com>, u-boot@lists.u-boot-project.org
Cc: Tom Rini <trini@konsulko.com>, linux-sunxi@lists.linux.dev
Subject: [PATCH 0/7] sunxi: add the Allwinner B288 and the PocketBook Verse
Date: Fri, 16 Oct 2026 10:16:01 +0100 [thread overview]
Message-ID: <20261016091608.121842-1-pmazzini@gmail.com> (raw)
The Allwinner B288 (sun8iw10p1) is a dual Cortex-A7 SoC used in e-book
readers. This series adds SPL and U-Boot support for it, and one board:
the PocketBook Verse (PB629).
The DT is still under review for Linux. Until it reaches
dts/upstream, the last patch carries a copy in arch/arm/dts.
Tested on a PB629.
Pablo Mazzini (7):
sunxi: add support for the Allwinner B288
sunxi: dram: support the Allwinner B288
dt-bindings: clock: add the Allwinner B288 CCU
clk: sunxi: add the Allwinner B288 gates and resets
pinctrl: sunxi: add the Allwinner B288 PIO
mmc: sunxi: B288 mmc0/mmc1 run off PLL_PERIPH0 2x
sunxi: add the PocketBook Verse
arch/arm/cpu/armv7/sunxi/psci.c | 9 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun8i-b288-pocketbook-verse.dts | 114 ++++++++
arch/arm/dts/sun8i-b288.dtsi | 292 +++++++++++++++++++
arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 16 +-
arch/arm/mach-sunxi/Kconfig | 14 +
arch/arm/mach-sunxi/board.c | 4 +
arch/arm/mach-sunxi/clock_sun6i.c | 1 +
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_sunxi_dw.c | 97 +++++-
board/sunxi/MAINTAINERS | 6 +
configs/pocketbook_verse_defconfig | 10 +
drivers/clk/sunxi/Kconfig | 7 +
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_b288.c | 101 +++++++
drivers/clk/sunxi/clk_sunxi.c | 5 +
drivers/mmc/sunxi_mmc.c | 7 +
drivers/pinctrl/sunxi/Kconfig | 5 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 22 ++
include/dt-bindings/clock/sun8i-b288-ccu.h | 82 ++++++
include/dt-bindings/reset/sun8i-b288-ccu.h | 45 +++
include/sunxi_gpio.h | 1 +
23 files changed, 827 insertions(+), 17 deletions(-)
create mode 100644 arch/arm/dts/sun8i-b288-pocketbook-verse.dts
create mode 100644 arch/arm/dts/sun8i-b288.dtsi
create mode 100644 configs/pocketbook_verse_defconfig
create mode 100644 drivers/clk/sunxi/clk_b288.c
create mode 100644 include/dt-bindings/clock/sun8i-b288-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-b288-ccu.h
base-commit: 65a7532545336e4b73e049a69436e255da7df961
--
2.52.0
next reply other threads:[~2026-10-16 9:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 9:16 Pablo Mazzini [this message]
2026-10-16 9:16 ` [PATCH 1/7] sunxi: add support for the Allwinner B288 Pablo Mazzini
2026-10-16 9:16 ` [PATCH 2/7] sunxi: dram: support " Pablo Mazzini
2026-10-16 9:16 ` [PATCH 3/7] dt-bindings: clock: add the Allwinner B288 CCU Pablo Mazzini
2026-10-16 9:16 ` [PATCH 4/7] clk: sunxi: add the Allwinner B288 gates and resets Pablo Mazzini
2026-10-16 9:16 ` [PATCH 5/7] pinctrl: sunxi: add the Allwinner B288 PIO Pablo Mazzini
2026-10-16 9:16 ` [PATCH 6/7] mmc: sunxi: B288 mmc0/mmc1 run off PLL_PERIPH0 2x Pablo Mazzini
2026-10-16 9:16 ` [PATCH 7/7] sunxi: add the PocketBook Verse Pablo Mazzini
2026-10-16 17:28 ` [PATCH 0/7] sunxi: add the Allwinner B288 and " Andre Przywara
2026-10-16 18:38 ` Pablo Mazzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016091608.121842-1-pmazzini@gmail.com \
--to=pmazzini@gmail.com \
--cc=andre.przywara@arm.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox