From: Pablo Mazzini <pmazzini@gmail.com>
To: Andre Przywara <andre.przywara@arm.com>, u-boot@lists.u-boot-project.org
Cc: Tom Rini <trini@konsulko.com>,
linux-sunxi@lists.linux.dev, Lukasz Majewski <lukma@nabladev.com>
Subject: [PATCH 4/7] clk: sunxi: add the Allwinner B288 gates and resets
Date: Fri, 16 Oct 2026 10:16:05 +0100 [thread overview]
Message-ID: <20261016091608.121842-5-pmazzini@gmail.com> (raw)
In-Reply-To: <20261016091608.121842-1-pmazzini@gmail.com>
The bus clock gates and resets, as in the Linux CCU driver.
Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
drivers/clk/sunxi/Kconfig | 7 +++
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_b288.c | 101 ++++++++++++++++++++++++++++++++++
drivers/clk/sunxi/clk_sunxi.c | 5 ++
4 files changed, 114 insertions(+)
create mode 100644 drivers/clk/sunxi/clk_b288.c
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 1c1cc82719c..e4fe6f63626 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -52,6 +52,13 @@ config CLK_SUN8I_A23
This enables common clock driver support for platforms based
on Allwinner A23/A33 SoC.
+config CLK_SUN8I_B288
+ bool "Clock driver for Allwinner B288"
+ default MACH_SUN8I_B288
+ help
+ This enables common clock driver support for platforms based
+ on Allwinner B288 SoC.
+
config CLK_SUN8I_A83T
bool "Clock driver for Allwinner A83T"
default MACH_SUN8I_A83T
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 93b542cebcd..4f278ff551a 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CLK_SUN6I_A31) += clk_a31.o
obj-$(CONFIG_CLK_SUN6I_A31_R) += clk_a31_r.o
obj-$(CONFIG_CLK_SUN8I_A23) += clk_a23.o
obj-$(CONFIG_CLK_SUN8I_A83T) += clk_a83t.o
+obj-$(CONFIG_CLK_SUN8I_B288) += clk_b288.o
obj-$(CONFIG_CLK_SUN8I_R40) += clk_r40.o
obj-$(CONFIG_CLK_SUN8I_V3S) += clk_v3s.o
obj-$(CONFIG_CLK_SUN9I_A80) += clk_a80.o
diff --git a/drivers/clk/sunxi/clk_b288.c b/drivers/clk/sunxi/clk_b288.c
new file mode 100644
index 00000000000..505fa27f83a
--- /dev/null
+++ b/drivers/clk/sunxi/clk_b288.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner B288 (sun8iw10p1) CCU gates and resets
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <clk/sunxi.h>
+#include <dt-bindings/clock/sun8i-b288-ccu.h>
+#include <dt-bindings/reset/sun8i-b288-ccu.h>
+#include <linux/bitops.h>
+
+static const struct ccu_clk_gate b288_gates[] = {
+ [CLK_BUS_DMA] = GATE(0x060, BIT(6)),
+ [CLK_BUS_SDMMC0_BUS] = GATE(0x060, BIT(8)),
+ [CLK_BUS_SDMMC1_BUS] = GATE(0x060, BIT(9)),
+ [CLK_BUS_SDMMC2_BUS] = GATE(0x060, BIT(10)),
+ [CLK_BUS_SDMMC3_BUS] = GATE(0x060, BIT(11)),
+ [CLK_BUS_NAND] = GATE(0x060, BIT(13)),
+ [CLK_BUS_SDRAM] = GATE(0x060, BIT(14)),
+ [CLK_BUS_PSRAM] = GATE(0x060, BIT(15)),
+ [CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
+ [CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
+ [CLK_BUS_SPI2] = GATE(0x060, BIT(22)),
+ [CLK_BUS_USBOTG] = GATE(0x060, BIT(24)),
+ [CLK_BUS_USBEHCI0] = GATE(0x060, BIT(26)),
+ [CLK_BUS_USBOHCI0] = GATE(0x060, BIT(29)),
+ [CLK_BUS_TCON0] = GATE(0x064, BIT(4)),
+ [CLK_BUS_CSI] = GATE(0x064, BIT(8)),
+ [CLK_BUS_DE] = GATE(0x064, BIT(12)),
+ [CLK_BUS_EE] = GATE(0x064, BIT(13)),
+ [CLK_BUS_ADDA] = GATE(0x068, BIT(0)),
+ [CLK_BUS_SPDIF] = GATE(0x068, BIT(1)),
+ [CLK_BUS_DSD] = GATE(0x068, BIT(2)),
+ [CLK_BUS_DMIC] = GATE(0x068, BIT(3)),
+ [CLK_BUS_PIO] = GATE(0x068, BIT(5)),
+ [CLK_BUS_THS] = GATE(0x068, BIT(8)),
+ [CLK_BUS_KEYADC] = GATE(0x068, BIT(9)),
+ [CLK_BUS_GPADC] = GATE(0x068, BIT(10)),
+ [CLK_BUS_I2S0] = GATE(0x068, BIT(12)),
+ [CLK_BUS_I2S1] = GATE(0x068, BIT(13)),
+ [CLK_BUS_TWI0] = GATE(0x06c, BIT(0)),
+ [CLK_BUS_TWI1] = GATE(0x06c, BIT(1)),
+ [CLK_BUS_TWI2] = GATE(0x06c, BIT(2)),
+ [CLK_BUS_UART0] = GATE(0x06c, BIT(16)),
+ [CLK_BUS_UART1] = GATE(0x06c, BIT(17)),
+ [CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
+ [CLK_BUS_UART3] = GATE(0x06c, BIT(19)),
+ [CLK_BUS_UART4] = GATE(0x06c, BIT(20)),
+ [CLK_BUS_UART5] = GATE(0x06c, BIT(21)),
+};
+
+static const struct ccu_reset b288_resets[] = {
+ [RST_USBPHY0] = RESET(0x0cc, BIT(0)),
+ [RST_MBUS] = RESET(0x0fc, BIT(31)),
+ [RST_BUS_DMA] = RESET(0x2c0, BIT(6)),
+ [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
+ [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
+ [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
+ [RST_BUS_MMC3] = RESET(0x2c0, BIT(11)),
+ [RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
+ [RST_BUS_DRAM] = RESET(0x2c0, BIT(14)),
+ [RST_BUS_PSRAM] = RESET(0x2c0, BIT(15)),
+ [RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
+ [RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
+ [RST_BUS_SPI2] = RESET(0x2c0, BIT(22)),
+ [RST_BUS_OTG] = RESET(0x2c0, BIT(24)),
+ [RST_BUS_EHCI0] = RESET(0x2c0, BIT(26)),
+ [RST_BUS_OHCI0] = RESET(0x2c0, BIT(29)),
+ [RST_BUS_WLAN] = RESET(0x2c4, BIT(1)),
+ [RST_BUS_TCON0] = RESET(0x2c4, BIT(4)),
+ [RST_BUS_CSI] = RESET(0x2c4, BIT(8)),
+ [RST_BUS_DE] = RESET(0x2c4, BIT(12)),
+ [RST_BUS_EE] = RESET(0x2c4, BIT(13)),
+ [RST_BUS_ADDA] = RESET(0x2d0, BIT(0)),
+ [RST_BUS_SPDIF] = RESET(0x2d0, BIT(1)),
+ [RST_BUS_DSD] = RESET(0x2d0, BIT(2)),
+ [RST_BUS_DMIC] = RESET(0x2d0, BIT(3)),
+ [RST_BUS_THS] = RESET(0x2d0, BIT(8)),
+ [RST_BUS_KEYADC] = RESET(0x2d0, BIT(9)),
+ [RST_BUS_GPADC] = RESET(0x2d0, BIT(10)),
+ [RST_BUS_I2S0] = RESET(0x2d0, BIT(12)),
+ [RST_BUS_I2S1] = RESET(0x2d0, BIT(13)),
+ [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)),
+ [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)),
+ [RST_BUS_I2C2] = RESET(0x2d8, BIT(2)),
+ [RST_BUS_UART0] = RESET(0x2d8, BIT(16)),
+ [RST_BUS_UART1] = RESET(0x2d8, BIT(17)),
+ [RST_BUS_UART2] = RESET(0x2d8, BIT(18)),
+ [RST_BUS_UART3] = RESET(0x2d8, BIT(19)),
+ [RST_BUS_UART4] = RESET(0x2d8, BIT(20)),
+ [RST_BUS_UART5] = RESET(0x2d8, BIT(21)),
+};
+
+const struct ccu_desc b288_ccu_desc = {
+ .gates = b288_gates,
+ .resets = b288_resets,
+ .num_gates = ARRAY_SIZE(b288_gates),
+ .num_resets = ARRAY_SIZE(b288_resets),
+};
diff --git a/drivers/clk/sunxi/clk_sunxi.c b/drivers/clk/sunxi/clk_sunxi.c
index 046d5d1605a..5f40f30fe89 100644
--- a/drivers/clk/sunxi/clk_sunxi.c
+++ b/drivers/clk/sunxi/clk_sunxi.c
@@ -117,6 +117,7 @@ extern const struct ccu_desc a64_ccu_desc;
extern const struct ccu_desc a80_ccu_desc;
extern const struct ccu_desc a80_mmc_clk_desc;
extern const struct ccu_desc a83t_ccu_desc;
+extern const struct ccu_desc b288_ccu_desc;
extern const struct ccu_desc d1_ccu_desc;
extern const struct ccu_desc f1c100s_ccu_desc;
extern const struct ccu_desc h3_ccu_desc;
@@ -154,6 +155,10 @@ static const struct udevice_id sunxi_clk_ids[] = {
{ .compatible = "allwinner,sun8i-a33-ccu",
.data = (ulong)&a23_ccu_desc },
#endif
+#ifdef CONFIG_CLK_SUN8I_B288
+ { .compatible = "allwinner,sun8i-b288-ccu",
+ .data = (ulong)&b288_ccu_desc },
+#endif
#ifdef CONFIG_CLK_SUN8I_A83T
{ .compatible = "allwinner,sun8i-a83t-ccu",
.data = (ulong)&a83t_ccu_desc },
--
2.52.0
next prev parent reply other threads:[~2026-10-16 9:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 9:16 [PATCH 0/7] sunxi: add the Allwinner B288 and the PocketBook Verse Pablo Mazzini
2026-10-16 9:16 ` [PATCH 1/7] sunxi: add support for the Allwinner B288 Pablo Mazzini
2026-10-16 9:16 ` [PATCH 2/7] sunxi: dram: support " Pablo Mazzini
2026-10-16 9:16 ` [PATCH 3/7] dt-bindings: clock: add the Allwinner B288 CCU Pablo Mazzini
2026-10-16 9:16 ` Pablo Mazzini [this message]
2026-10-16 9:16 ` [PATCH 5/7] pinctrl: sunxi: add the Allwinner B288 PIO Pablo Mazzini
2026-10-16 9:16 ` [PATCH 6/7] mmc: sunxi: B288 mmc0/mmc1 run off PLL_PERIPH0 2x Pablo Mazzini
2026-10-16 9:16 ` [PATCH 7/7] sunxi: add the PocketBook Verse Pablo Mazzini
2026-10-16 17:28 ` [PATCH 0/7] sunxi: add the Allwinner B288 and " Andre Przywara
2026-10-16 18:38 ` Pablo Mazzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016091608.121842-5-pmazzini@gmail.com \
--to=pmazzini@gmail.com \
--cc=andre.przywara@arm.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukma@nabladev.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox