[PATCH v6 0/4] mmc: mediatek: add mmc cqhci support

[PATCH v6 0/4] mmc: mediatek: add mmc cqhci support

[Chun-Hung Wu]

This series provides MediaTek cqhci implementations as below:
  - Extend mmc_of_parse() to parse CQE bindings
  - Remove redundant host CQE bindings
  - Refine msdc timeout api to reduce redundant code
  - MediaTek command queue support
  - dt-bindings for mt6779

v1 -> v2:
  - Add more patch details in commit message
  - Separate msdc timeout api refine to individual patch

v2 -> v3:
  - Remove CR-Id, Change-Id and Feature in patches
  - Add Signed-off-by in patches

v3 -> v4:
  - Refine CQE bindings in mmc_of_parse (Ulf Hansson)
  - Remove redundant host CQE bindings (Linux Walleij)

v4 -> v5:
  - Add Acked-by and more maintainers

v5 -> v6:
  - Move CQE bindings back to vendor driver
  - Add mt6779 mmc support as an individual patch
  - Error handling for cq_host devm_kzallo()

Chun-Hung Wu (4):
  [1/4] mmc: mediatek: add MT6779 MMC driver support
  [2/4] mmc: mediatek: refine msdc timeout api
  [3/4] mmc: mediatek: command queue support
  [4/4] dt-bindings: mmc: mediatek: Add document for mt6779

 Documentation/devicetree/bindings/mmc/mtk-sd.txt |   4 +
 drivers/mmc/host/mtk-sd.c                        | 164 +++++++++++++++++++++--
 2 files changed, 158 insertions(+), 10 deletions(-)

-- 
1.9.1

[PATCH v6 1/4] mmc: mediatek: add MT6779 MMC driver support

[Chun-Hung Wu]

MT6779 add cqhci support, so need to add new code
to support it.

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index b221c02..8ada675 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -538,6 +538,18 @@ struct msdc_host {
 	.use_internal_cd = true,
 };
 
+static const struct mtk_mmc_compatible mt6779_compat = {
+	.clk_div_bits = 12,
+	.hs400_tune = false,
+	.pad_tune_reg = MSDC_PAD_TUNE0,
+	.async_fifo = true,
+	.data_tune = true,
+	.busy_check = true,
+	.stop_clk_fix = true,
+	.enhance_rx = true,
+	.support_64g = true,
+};
+
 static const struct of_device_id msdc_of_ids[] = {
 	{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
 	{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
@@ -547,6 +559,7 @@ struct msdc_host {
 	{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
 	{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
 	{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
+	{ .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
 	{}
 };
 MODULE_DEVICE_TABLE(of, msdc_of_ids);
-- 
1.9.1

Re: [PATCH v6 1/4] mmc: mediatek: add MT6779 MMC driver support

[Matthias Brugger]

On 09/06/2020 03:18, Chun-Hung Wu wrote:
> MT6779 add cqhci support, so need to add new code
> to support it.
> 

Please work on the commit message. For example it mentions cqhci while the code
does not. Better describe what technical specification the controller has etc

> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
>  drivers/mmc/host/mtk-sd.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index b221c02..8ada675 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -538,6 +538,18 @@ struct msdc_host {
>  	.use_internal_cd = true,
>  };
>  
> +static const struct mtk_mmc_compatible mt6779_compat = {
> +	.clk_div_bits = 12,
> +	.hs400_tune = false,
> +	.pad_tune_reg = MSDC_PAD_TUNE0,
> +	.async_fifo = true,
> +	.data_tune = true,
> +	.busy_check = true,
> +	.stop_clk_fix = true,
> +	.enhance_rx = true,
> +	.support_64g = true,
> +};
> +
>  static const struct of_device_id msdc_of_ids[] = {
>  	{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
>  	{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> @@ -547,6 +559,7 @@ struct msdc_host {
>  	{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
>  	{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
>  	{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
> +	{ .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, msdc_of_ids);
> 

[PATCH v6 3/4] mmc: mediatek: command queue support

[Chun-Hung Wu]

Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
b. Connect mtk msdc driver to cqhci driver through
   host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
   more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Use the options below to separate support for CQHCI or not, because
   some of our platform does not support CQHCI hence no kernel option:
   CONFIG_MMC_CQHCI.
   #if IS_ENABLED(CONFIG_MMC_CQHCI)
   XXX //Support CQHCI
   #else
   XXX //Not support CQHCI
   #endif

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 84a7bd44..9d69269 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -31,6 +31,8 @@
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/slot-gpio.h>
 
+#include "cqhci.h"
+
 #define MAX_BD_NUM          1024
 
 /*--------------------------------------------------------------------------*/
@@ -152,6 +154,7 @@
 #define MSDC_INT_DMA_BDCSERR    (0x1 << 17)	/* W1C */
 #define MSDC_INT_DMA_GPDCSERR   (0x1 << 18)	/* W1C */
 #define MSDC_INT_DMA_PROTECT    (0x1 << 19)	/* W1C */
+#define MSDC_INT_CMDQ           (0x1 << 28)	/* W1C */
 
 /* MSDC_INTEN mask */
 #define MSDC_INTEN_MMCIRQ       (0x1 << 0)	/* RW */
@@ -182,6 +185,7 @@
 /* SDC_CFG mask */
 #define SDC_CFG_SDIOINTWKUP     (0x1 << 0)	/* RW */
 #define SDC_CFG_INSWKUP         (0x1 << 1)	/* RW */
+#define SDC_CFG_WRDTOC          (0x1fff  << 2)  /* RW */
 #define SDC_CFG_BUSWIDTH        (0x3 << 16)	/* RW */
 #define SDC_CFG_SDIO            (0x1 << 19)	/* RW */
 #define SDC_CFG_SDIOIDE         (0x1 << 20)	/* RW */
@@ -230,6 +234,7 @@
 #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
 
 #define MSDC_PATCH_BIT1_CMDTA     (0x7 << 3)    /* RW */
+#define MSDC_PB1_BUSY_CHECK_SEL   (0x1 << 7)    /* RW */
 #define MSDC_PATCH_BIT1_STOP_DLY  (0xf << 8)    /* RW */
 
 #define MSDC_PATCH_BIT2_CFGRESP   (0x1 << 15)   /* RW */
@@ -431,9 +436,11 @@ struct msdc_host {
 				 /* cmd response sample selection for HS400 */
 	bool hs400_mode;	/* current eMMC will run at hs400 mode */
 	bool internal_cd;	/* Use internal card-detect logic */
+	bool cqhci;		/* support eMMC hw cmdq */
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+	struct cqhci_host *cq_host;
 };
 
 static const struct mtk_mmc_compatible mt8135_compat = {
@@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
 		      (u32)(timeout > 255 ? 255 : timeout));
 }
 
+static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+	u64 timeout;
+
+	timeout = msdc_timeout_cal(host, ns, clks);
+	sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
+		      (u32)(timeout > 8191 ? 8191 : timeout));
+}
+
 static void msdc_gate_clock(struct msdc_host *host)
 {
 	clk_disable_unprepare(host->src_clk_cg);
@@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 		pm_runtime_put_noidle(host->dev);
 }
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
+{
+	int cmd_err = 0, dat_err = 0;
+
+	if (intsts & MSDC_INT_RSPCRCERR) {
+		cmd_err = -EILSEQ;
+		dev_err(host->dev, "%s: CMD CRC ERR", __func__);
+	} else if (intsts & MSDC_INT_CMDTMO) {
+		cmd_err = -ETIMEDOUT;
+		dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
+	}
+
+	if (intsts & MSDC_INT_DATCRCERR) {
+		dat_err = -EILSEQ;
+		dev_err(host->dev, "%s: DATA CRC ERR", __func__);
+	} else if (intsts & MSDC_INT_DATTMO) {
+		dat_err = -ETIMEDOUT;
+		dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
+	}
+
+	if (cmd_err || dat_err) {
+		dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
+			cmd_err, dat_err, intsts);
+	}
+
+	return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
+}
+#endif
+
 static irqreturn_t msdc_irq(int irq, void *dev_id)
 {
 	struct msdc_host *host = (struct msdc_host *) dev_id;
@@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
 		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
 			break;
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+		if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
+		    (events & MSDC_INT_CMDQ)) {
+			msdc_cmdq_irq(host, events);
+			/* clear interrupts */
+			writel(events, host->base + MSDC_INT);
+			return IRQ_HANDLED;
+		}
+#endif
+
 		if (!mrq) {
 			dev_err(host->dev,
 				"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
@@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
 		return !val;
 }
 
+static void msdc_cqe_enable(struct mmc_host *mmc)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+
+	/* enable cmdq irq */
+	writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
+	/* enable busy check */
+	sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+	/* default write data / busy timeout 20s */
+	msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
+	/* default read data timeout 1s */
+	msdc_set_timeout(host, 1000000000ULL, 0);
+}
+
+void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+
+	/* disable cmdq irq */
+	sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
+	/* disable busy check */
+	sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+
+	if (recovery) {
+		sdr_set_field(host->base + MSDC_DMA_CTRL,
+			      MSDC_DMA_CTRL_STOP, 1);
+		msdc_reset_hw(host);
+	}
+}
+
 static const struct mmc_host_ops mt_msdc_ops = {
 	.post_req = msdc_post_req,
 	.pre_req = msdc_pre_req,
@@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
 	.hw_reset = msdc_hw_reset,
 };
 
+static const struct cqhci_host_ops msdc_cmdq_ops = {
+	.enable         = msdc_cqe_enable,
+	.disable        = msdc_cqe_disable,
+};
+
 static void msdc_of_property_parse(struct platform_device *pdev,
 				   struct msdc_host *host)
 {
@@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
 		host->hs400_cmd_resp_sel_rising = true;
 	else
 		host->hs400_cmd_resp_sel_rising = false;
+
+	if (of_property_read_bool(pdev->dev.of_node,
+				  "mediatek,cqhci"))
+		host->cqhci = true;
+	else
+		host->cqhci = false;
 }
 
 static int msdc_drv_probe(struct platform_device *pdev)
@@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
 
 	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+	if (host->cqhci)
+		mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
 	/* MMC core transfer sizes tunable parameters */
 	mmc->max_segs = MAX_BD_NUM;
 	if (host->dev_comp->support_64g)
@@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		host->dma_mask = DMA_BIT_MASK(32);
 	mmc_dev(mmc)->dma_mask = &host->dma_mask;
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+	if (mmc->caps2 & MMC_CAP2_CQE) {
+		host->cq_host = devm_kzalloc(host->mmc->parent,
+					     sizeof(*host->cq_host),
+					     GFP_KERNEL);
+		if (!host->cq_host) {
+			ret = -ENOMEM;
+			goto host_free;
+		}
+		host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+		host->cq_host->mmio = host->base + 0x800;
+		host->cq_host->ops = &msdc_cmdq_ops;
+		cqhci_init(host->cq_host, mmc, true);
+		mmc->max_segs = 128;
+		/* cqhci 16bit length */
+		/* 0 size, means 65536 so we don't have to -1 here */
+		mmc->max_seg_size = 64 * 1024;
+	}
+#endif
+
 	host->timeout_clks = 3 * 1048576;
 	host->dma.gpd = dma_alloc_coherent(&pdev->dev,
 				2 * sizeof(struct mt_gpdma_desc),
-- 
1.9.1

Re: [PATCH v6 3/4] mmc: mediatek: command queue support

[Matthias Brugger]

On 09/06/2020 03:18, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
>    host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
>    more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
>    some of our platform does not support CQHCI hence no kernel option:
>    CONFIG_MMC_CQHCI.
>    #if IS_ENABLED(CONFIG_MMC_CQHCI)
>    XXX //Support CQHCI
>    #else
>    XXX //Not support CQHCI
>    #endif
> 

I think that we don't need the #if IS_ENABLED() because we add a boolean in the
msdc_host.

> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
>  drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 119 insertions(+)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
>  #include <linux/mmc/sdio.h>
>  #include <linux/mmc/slot-gpio.h>
>  
> +#include "cqhci.h"
> +
>  #define MAX_BD_NUM          1024
>  
>  /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
>  #define MSDC_INT_DMA_BDCSERR    (0x1 << 17)	/* W1C */
>  #define MSDC_INT_DMA_GPDCSERR   (0x1 << 18)	/* W1C */
>  #define MSDC_INT_DMA_PROTECT    (0x1 << 19)	/* W1C */
> +#define MSDC_INT_CMDQ           (0x1 << 28)	/* W1C */
>  
>  /* MSDC_INTEN mask */
>  #define MSDC_INTEN_MMCIRQ       (0x1 << 0)	/* RW */
> @@ -182,6 +185,7 @@
>  /* SDC_CFG mask */
>  #define SDC_CFG_SDIOINTWKUP     (0x1 << 0)	/* RW */
>  #define SDC_CFG_INSWKUP         (0x1 << 1)	/* RW */
> +#define SDC_CFG_WRDTOC          (0x1fff  << 2)  /* RW */
>  #define SDC_CFG_BUSWIDTH        (0x3 << 16)	/* RW */
>  #define SDC_CFG_SDIO            (0x1 << 19)	/* RW */
>  #define SDC_CFG_SDIOIDE         (0x1 << 20)	/* RW */
> @@ -230,6 +234,7 @@
>  #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
>  
>  #define MSDC_PATCH_BIT1_CMDTA     (0x7 << 3)    /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL   (0x1 << 7)    /* RW */
>  #define MSDC_PATCH_BIT1_STOP_DLY  (0xf << 8)    /* RW */
>  
>  #define MSDC_PATCH_BIT2_CFGRESP   (0x1 << 15)   /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
>  				 /* cmd response sample selection for HS400 */
>  	bool hs400_mode;	/* current eMMC will run at hs400 mode */
>  	bool internal_cd;	/* Use internal card-detect logic */
> +	bool cqhci;		/* support eMMC hw cmdq */
>  	struct msdc_save_para save_para; /* used when gate HCLK */
>  	struct msdc_tune_para def_tune_para; /* default tune setting */
>  	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> +	struct cqhci_host *cq_host;
>  };
>  
>  static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
>  		      (u32)(timeout > 255 ? 255 : timeout));
>  }
>  
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> +	u64 timeout;
> +
> +	timeout = msdc_timeout_cal(host, ns, clks);
> +	sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> +		      (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
>  static void msdc_gate_clock(struct msdc_host *host)
>  {
>  	clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
>  		pm_runtime_put_noidle(host->dev);
>  }
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> +	int cmd_err = 0, dat_err = 0;
> +
> +	if (intsts & MSDC_INT_RSPCRCERR) {
> +		cmd_err = -EILSEQ;
> +		dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_CMDTMO) {
> +		cmd_err = -ETIMEDOUT;
> +		dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> +	}
> +
> +	if (intsts & MSDC_INT_DATCRCERR) {
> +		dat_err = -EILSEQ;
> +		dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_DATTMO) {
> +		dat_err = -ETIMEDOUT;
> +		dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> +	}
> +
> +	if (cmd_err || dat_err) {
> +		dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> +			cmd_err, dat_err, intsts);
> +	}
> +
> +	return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
>  static irqreturn_t msdc_irq(int irq, void *dev_id)
>  {
>  	struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
>  		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
>  			break;
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +		if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> +		    (events & MSDC_INT_CMDQ)) {
> +			msdc_cmdq_irq(host, events);
> +			/* clear interrupts */
> +			writel(events, host->base + MSDC_INT);
> +			return IRQ_HANDLED;
> +		}
> +#endif
> +
>  		if (!mrq) {
>  			dev_err(host->dev,
>  				"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  		return !val;
>  }
>  
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* enable cmdq irq */
> +	writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> +	/* enable busy check */
> +	sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +	/* default write data / busy timeout 20s */
> +	msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> +	/* default read data timeout 1s */
> +	msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* disable cmdq irq */
> +	sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> +	/* disable busy check */
> +	sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> +	if (recovery) {
> +		sdr_set_field(host->base + MSDC_DMA_CTRL,
> +			      MSDC_DMA_CTRL_STOP, 1);
> +		msdc_reset_hw(host);
> +	}
> +}
> +
>  static const struct mmc_host_ops mt_msdc_ops = {
>  	.post_req = msdc_post_req,
>  	.pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  	.hw_reset = msdc_hw_reset,
>  };
>  
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> +	.enable         = msdc_cqe_enable,
> +	.disable        = msdc_cqe_disable,
> +};
> +
>  static void msdc_of_property_parse(struct platform_device *pdev,
>  				   struct msdc_host *host)
>  {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
>  		host->hs400_cmd_resp_sel_rising = true;
>  	else
>  		host->hs400_cmd_resp_sel_rising = false;
> +
> +	if (of_property_read_bool(pdev->dev.of_node,
> +				  "mediatek,cqhci"))
> +		host->cqhci = true;
> +	else
> +		host->cqhci = false;

Does this mean that there are mt6779 contoller which do not support cqhci?
Otherwise could add the boolean in struct mtk_mmc_compatible and get rid of the
device tree requirement.

Regards,
Matthias

Re: [PATCH v6 3/4] mmc: mediatek: command queue support

[Adrian Hunter]

On 9/06/20 4:18 am, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout.
> b. Connect mtk msdc driver to cqhci driver through
>    host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
>    more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
>    some of our platform does not support CQHCI hence no kernel option:
>    CONFIG_MMC_CQHCI.
>    #if IS_ENABLED(CONFIG_MMC_CQHCI)
>    XXX //Support CQHCI
>    #else
>    XXX //Not support CQHCI
>    #endif

Other drivers "select MMC_CQHCI" in Kconfig even though they support
hardware with or without CQHCI.

> 
> Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
> ---
>  drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 119 insertions(+)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 84a7bd44..9d69269 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
>  #include <linux/mmc/sdio.h>
>  #include <linux/mmc/slot-gpio.h>
>  
> +#include "cqhci.h"
> +
>  #define MAX_BD_NUM          1024
>  
>  /*--------------------------------------------------------------------------*/
> @@ -152,6 +154,7 @@
>  #define MSDC_INT_DMA_BDCSERR    (0x1 << 17)	/* W1C */
>  #define MSDC_INT_DMA_GPDCSERR   (0x1 << 18)	/* W1C */
>  #define MSDC_INT_DMA_PROTECT    (0x1 << 19)	/* W1C */
> +#define MSDC_INT_CMDQ           (0x1 << 28)	/* W1C */
>  
>  /* MSDC_INTEN mask */
>  #define MSDC_INTEN_MMCIRQ       (0x1 << 0)	/* RW */
> @@ -182,6 +185,7 @@
>  /* SDC_CFG mask */
>  #define SDC_CFG_SDIOINTWKUP     (0x1 << 0)	/* RW */
>  #define SDC_CFG_INSWKUP         (0x1 << 1)	/* RW */
> +#define SDC_CFG_WRDTOC          (0x1fff  << 2)  /* RW */
>  #define SDC_CFG_BUSWIDTH        (0x3 << 16)	/* RW */
>  #define SDC_CFG_SDIO            (0x1 << 19)	/* RW */
>  #define SDC_CFG_SDIOIDE         (0x1 << 20)	/* RW */
> @@ -230,6 +234,7 @@
>  #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
>  
>  #define MSDC_PATCH_BIT1_CMDTA     (0x7 << 3)    /* RW */
> +#define MSDC_PB1_BUSY_CHECK_SEL   (0x1 << 7)    /* RW */
>  #define MSDC_PATCH_BIT1_STOP_DLY  (0xf << 8)    /* RW */
>  
>  #define MSDC_PATCH_BIT2_CFGRESP   (0x1 << 15)   /* RW */
> @@ -431,9 +436,11 @@ struct msdc_host {
>  				 /* cmd response sample selection for HS400 */
>  	bool hs400_mode;	/* current eMMC will run at hs400 mode */
>  	bool internal_cd;	/* Use internal card-detect logic */
> +	bool cqhci;		/* support eMMC hw cmdq */
>  	struct msdc_save_para save_para; /* used when gate HCLK */
>  	struct msdc_tune_para def_tune_para; /* default tune setting */
>  	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> +	struct cqhci_host *cq_host;
>  };
>  
>  static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
>  		      (u32)(timeout > 255 ? 255 : timeout));
>  }
>  
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> +	u64 timeout;
> +
> +	timeout = msdc_timeout_cal(host, ns, clks);
> +	sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> +		      (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
>  static void msdc_gate_clock(struct msdc_host *host)
>  {
>  	clk_disable_unprepare(host->src_clk_cg);
> @@ -1480,6 +1496,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
>  		pm_runtime_put_noidle(host->dev);
>  }
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> +	int cmd_err = 0, dat_err = 0;
> +
> +	if (intsts & MSDC_INT_RSPCRCERR) {
> +		cmd_err = -EILSEQ;
> +		dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_CMDTMO) {
> +		cmd_err = -ETIMEDOUT;
> +		dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> +	}
> +
> +	if (intsts & MSDC_INT_DATCRCERR) {
> +		dat_err = -EILSEQ;
> +		dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> +	} else if (intsts & MSDC_INT_DATTMO) {
> +		dat_err = -ETIMEDOUT;
> +		dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> +	}
> +
> +	if (cmd_err || dat_err) {
> +		dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> +			cmd_err, dat_err, intsts);
> +	}
> +
> +	return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
>  static irqreturn_t msdc_irq(int irq, void *dev_id)
>  {
>  	struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1516,6 +1562,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
>  		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
>  			break;
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +		if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> +		    (events & MSDC_INT_CMDQ)) {
> +			msdc_cmdq_irq(host, events);
> +			/* clear interrupts */
> +			writel(events, host->base + MSDC_INT);
> +			return IRQ_HANDLED;
> +		}
> +#endif
> +
>  		if (!mrq) {
>  			dev_err(host->dev,
>  				"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2200,6 +2256,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  		return !val;
>  }
>  
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* enable cmdq irq */
> +	writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> +	/* enable busy check */
> +	sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +	/* default write data / busy timeout 20s */
> +	msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> +	/* default read data timeout 1s */
> +	msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +
> +	/* disable cmdq irq */
> +	sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> +	/* disable busy check */
> +	sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> +	if (recovery) {
> +		sdr_set_field(host->base + MSDC_DMA_CTRL,
> +			      MSDC_DMA_CTRL_STOP, 1);
> +		msdc_reset_hw(host);
> +	}
> +}
> +
>  static const struct mmc_host_ops mt_msdc_ops = {
>  	.post_req = msdc_post_req,
>  	.pre_req = msdc_pre_req,
> @@ -2216,6 +2302,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
>  	.hw_reset = msdc_hw_reset,
>  };
>  
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> +	.enable         = msdc_cqe_enable,
> +	.disable        = msdc_cqe_disable,
> +};
> +
>  static void msdc_of_property_parse(struct platform_device *pdev,
>  				   struct msdc_host *host)
>  {
> @@ -2236,6 +2327,12 @@ static void msdc_of_property_parse(struct platform_device *pdev,
>  		host->hs400_cmd_resp_sel_rising = true;
>  	else
>  		host->hs400_cmd_resp_sel_rising = false;
> +
> +	if (of_property_read_bool(pdev->dev.of_node,
> +				  "mediatek,cqhci"))
> +		host->cqhci = true;
> +	else
> +		host->cqhci = false;
>  }
>  
>  static int msdc_drv_probe(struct platform_device *pdev)
> @@ -2351,6 +2448,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
>  		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
>  
>  	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> +	if (host->cqhci)
> +		mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
>  	/* MMC core transfer sizes tunable parameters */
>  	mmc->max_segs = MAX_BD_NUM;
>  	if (host->dev_comp->support_64g)
> @@ -2366,6 +2465,26 @@ static int msdc_drv_probe(struct platform_device *pdev)
>  		host->dma_mask = DMA_BIT_MASK(32);
>  	mmc_dev(mmc)->dma_mask = &host->dma_mask;
>  
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +	if (mmc->caps2 & MMC_CAP2_CQE) {
> +		host->cq_host = devm_kzalloc(host->mmc->parent,
> +					     sizeof(*host->cq_host),
> +					     GFP_KERNEL);
> +		if (!host->cq_host) {
> +			ret = -ENOMEM;
> +			goto host_free;
> +		}
> +		host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> +		host->cq_host->mmio = host->base + 0x800;
> +		host->cq_host->ops = &msdc_cmdq_ops;
> +		cqhci_init(host->cq_host, mmc, true);

cqhci_init() can return an error.

> +		mmc->max_segs = 128;
> +		/* cqhci 16bit length */
> +		/* 0 size, means 65536 so we don't have to -1 here */
> +		mmc->max_seg_size = 64 * 1024;
> +	}
> +#endif
> +
>  	host->timeout_clks = 3 * 1048576;
>  	host->dma.gpd = dma_alloc_coherent(&pdev->dev,
>  				2 * sizeof(struct mt_gpdma_desc),
> 

[PATCH v6 2/4] mmc: mediatek: refine msdc timeout api

[Chun-Hung Wu]

Extract msdc timeout api common part to have
better code architecture and avoid redundant code.

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 8ada675..84a7bd44 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -723,21 +723,21 @@ static void msdc_unprepare_data(struct msdc_host *host, struct mmc_request *mrq)
 	}
 }
 
-/* clock control primitives */
-static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
+static u64 msdc_timeout_cal(struct msdc_host *host, u64 ns, u64 clks)
 {
-	u32 timeout, clk_ns;
+	u64 timeout, clk_ns;
 	u32 mode = 0;
 
-	host->timeout_ns = ns;
-	host->timeout_clks = clks;
 	if (host->mmc->actual_clock == 0) {
 		timeout = 0;
 	} else {
-		clk_ns  = 1000000000UL / host->mmc->actual_clock;
-		timeout = (ns + clk_ns - 1) / clk_ns + clks;
+		clk_ns  = 1000000000ULL;
+		do_div(clk_ns, host->mmc->actual_clock);
+		timeout = ns + clk_ns - 1;
+		do_div(timeout, clk_ns);
+		timeout += clks;
 		/* in 1048576 sclk cycle unit */
-		timeout = (timeout + (0x1 << 20) - 1) >> 20;
+		timeout = DIV_ROUND_UP(timeout, (0x1 << 20));
 		if (host->dev_comp->clk_div_bits == 8)
 			sdr_get_field(host->base + MSDC_CFG,
 				      MSDC_CFG_CKMOD, &mode);
@@ -747,9 +747,21 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
 		/*DDR mode will double the clk cycles for data timeout */
 		timeout = mode >= 2 ? timeout * 2 : timeout;
 		timeout = timeout > 1 ? timeout - 1 : 0;
-		timeout = timeout > 255 ? 255 : timeout;
 	}
-	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
+	return timeout;
+}
+
+/* clock control primitives */
+static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+	u64 timeout;
+
+	host->timeout_ns = ns;
+	host->timeout_clks = clks;
+
+	timeout = msdc_timeout_cal(host, ns, clks);
+	sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC,
+		      (u32)(timeout > 255 ? 255 : timeout));
 }
 
 static void msdc_gate_clock(struct msdc_host *host)
-- 
1.9.1

[PATCH v6 4/4] dt-bindings: mmc: mediatek: Add document for mt6779

[Chun-Hung Wu]

Add compatible node for mt6779 mmc and HW cmdq selection
node "mediatek,cqhci".

Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 8a532f4..d4d20b9 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -12,6 +12,7 @@ Required properties:
 	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
 	"mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
 	"mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
+	"mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
 	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
 	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
 	"mediatek,mt7622-mmc": for MT7622 SoC
@@ -49,6 +50,9 @@ Optional properties:
 		     error caused by stop clock(fifo full)
 		     Valid range = [0:0x7]. if not present, default value is 0.
 		     applied to compatible "mediatek,mt2701-mmc".
+- mediatek,cqhci: HW cmdq selection
+		  If present, hw command queue is enabled.
+		  If not present, hw command queue is disabled.
 
 Examples:
 mmc0: mmc@11230000 {
-- 
1.9.1

Re: [PATCH v6 4/4] dt-bindings: mmc: mediatek: Add document for mt6779

[Rob Herring]

On Tue, Jun 09, 2020 at 09:18:22AM +0800, Chun-Hung Wu wrote:
> Add compatible node for mt6779 mmc and HW cmdq selection
> node "mediatek,cqhci".
> 
> Signed-off-by: Chun-Hung Wu <chun-hung.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 8a532f4..d4d20b9 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -12,6 +12,7 @@ Required properties:
>  	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
>  	"mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
>  	"mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
> +	"mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
>  	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
>  	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
>  	"mediatek,mt7622-mmc": for MT7622 SoC
> @@ -49,6 +50,9 @@ Optional properties:
>  		     error caused by stop clock(fifo full)
>  		     Valid range = [0:0x7]. if not present, default value is 0.
>  		     applied to compatible "mediatek,mt2701-mmc".
> +- mediatek,cqhci: HW cmdq selection
> +		  If present, hw command queue is enabled.
> +		  If not present, hw command queue is disabled.

'supports-cqe' does the same thing.

>  
>  Examples:
>  mmc0: mmc@11230000 {
> -- 
> 1.9.1