[RESEND V2 PATCH 1/3] soc/tegra: fuse: export tegra_sku_info for module use

[RESEND V2 PATCH 1/3] soc/tegra: fuse: export tegra_sku_info for module use

[Vince Hsu]

Some Tegra drivers might be complied as kernel modules, and
they need the fuse information for initialization. One
example is the GK20A Nouveau driver. It needs the GPU speedo
value to calculate frequency-voltage table. So export
the tegra_sku_info.

Signed-off-by: Vince Hsu <vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---

v2: add more description why we need this patch

 drivers/soc/tegra/fuse/fuse-tegra.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 11a5043959dc..011a3363c265 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -31,6 +31,7 @@
 static u32 (*fuse_readl)(const unsigned int offset);
 static int fuse_size;
 struct tegra_sku_info tegra_sku_info;
+EXPORT_SYMBOL(tegra_sku_info);
 
 static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
 	[TEGRA_REVISION_UNKNOWN] = "unknown",
-- 
1.9.1

[RESEND PATCH nouveau 2/3] volt: allow non-bios voltage scaling

[Vince Hsu]

Signed-off-by: Vince Hsu <vinceh@nvidia.com>
---

Resend this patch with the fuse change and proper patch prefix
per Thierry's request.

 nvkm/subdev/volt/base.c | 67 ++++++++++++++++++++++++++++---------------------
 1 file changed, 38 insertions(+), 29 deletions(-)

diff --git a/nvkm/subdev/volt/base.c b/nvkm/subdev/volt/base.c
index 32794a999106..26ccd8df193f 100644
--- a/nvkm/subdev/volt/base.c
+++ b/nvkm/subdev/volt/base.c
@@ -101,6 +101,41 @@ nouveau_volt_set_id(struct nouveau_volt *volt, u8 id, int condition)
 	return ret;
 }
 
+static void nouveau_volt_parse_bios(struct nouveau_bios *bios,
+		struct nouveau_volt *volt)
+{
+	struct nvbios_volt_entry ivid;
+	struct nvbios_volt info;
+	u8  ver, hdr, cnt, len;
+	u16 data;
+	int i;
+
+	data = nvbios_volt_parse(bios, &ver, &hdr, &cnt, &len, &info);
+	if (data && info.vidmask && info.base && info.step) {
+		for (i = 0; i < info.vidmask + 1; i++) {
+			if (info.base >= info.min &&
+				info.base <= info.max) {
+				volt->vid[volt->vid_nr].uv = info.base;
+				volt->vid[volt->vid_nr].vid = i;
+				volt->vid_nr++;
+			}
+			info.base += info.step;
+		}
+		volt->vid_mask = info.vidmask;
+	} else if (data && info.vidmask) {
+		for (i = 0; i < cnt; i++) {
+			data = nvbios_volt_entry_parse(bios, i, &ver, &hdr,
+							  &ivid);
+			if (data) {
+				volt->vid[volt->vid_nr].uv = ivid.voltage;
+				volt->vid[volt->vid_nr].vid = ivid.vid;
+				volt->vid_nr++;
+			}
+		}
+		volt->vid_mask = info.vidmask;
+	}
+}
+
 int
 _nouveau_volt_init(struct nouveau_object *object)
 {
@@ -136,10 +171,6 @@ nouveau_volt_create_(struct nouveau_object *parent,
 {
 	struct nouveau_bios *bios = nouveau_bios(parent);
 	struct nouveau_volt *volt;
-	struct nvbios_volt_entry ivid;
-	struct nvbios_volt info;
-	u8  ver, hdr, cnt, len;
-	u16 data;
 	int ret, i;
 
 	ret = nouveau_subdev_create_(parent, engine, oclass, 0, "VOLT",
@@ -152,31 +183,9 @@ nouveau_volt_create_(struct nouveau_object *parent,
 	volt->set = nouveau_volt_set;
 	volt->set_id = nouveau_volt_set_id;
 
-	data = nvbios_volt_parse(bios, &ver, &hdr, &cnt, &len, &info);
-	if (data && info.vidmask && info.base && info.step) {
-		for (i = 0; i < info.vidmask + 1; i++) {
-			if (info.base >= info.min &&
-			    info.base <= info.max) {
-				volt->vid[volt->vid_nr].uv = info.base;
-				volt->vid[volt->vid_nr].vid = i;
-				volt->vid_nr++;
-			}
-			info.base += info.step;
-		}
-		volt->vid_mask = info.vidmask;
-	} else
-	if (data && info.vidmask) {
-		for (i = 0; i < cnt; i++) {
-			data = nvbios_volt_entry_parse(bios, i, &ver, &hdr,
-						      &ivid);
-			if (data) {
-				volt->vid[volt->vid_nr].uv = ivid.voltage;
-				volt->vid[volt->vid_nr].vid = ivid.vid;
-				volt->vid_nr++;
-			}
-		}
-		volt->vid_mask = info.vidmask;
-	}
+	/* Assuming the non-bios device should build the voltage table later */
+	if (bios)
+		nouveau_volt_parse_bios(bios, volt);
 
 	if (volt->vid_nr) {
 		for (i = 0; i < volt->vid_nr; i++) {
-- 
1.9.1

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: [RESEND PATCH nouveau 2/3] volt: allow non-bios voltage scaling

[Alexandre Courbot]

On Fri, Nov 28, 2014 at 8:12 PM, Vince Hsu <vinceh@nvidia.com> wrote:
> Signed-off-by: Vince Hsu <vinceh@nvidia.com>

Make sure you always write a short summary for your patches, even if
the title sounds sufficient.

At the very least this patch makes the code easier to read, so:

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: [RESEND PATCH nouveau 2/3] volt: allow non-bios voltage scaling

[Martin Peres]

On 29/11/2014 09:22, Alexandre Courbot wrote:
> On Fri, Nov 28, 2014 at 8:12 PM, Vince Hsu <vinceh@nvidia.com> wrote:
>> Signed-off-by: Vince Hsu <vinceh@nvidia.com>
> Make sure you always write a short summary for your patches, even if
> the title sounds sufficient.

I agree. Something like "Move the vbios parsing out of init() and
call it conditionally if the platform has a vbios. Non-vbios platforms
can use the ctor() to init the data structures.".

> At the very least this patch makes the code easier to read, so:
>
> Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Martin Peres <martin.peres@free.fr>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

[RESEND PATCH nouveau 3/3] volt: add support for GK20A

[Vince Hsu]

The voltage value are calculated by the hardware characterized
result.

Signed-off-by: Vince Hsu <vinceh@nvidia.com>
---

Resend this patch with the fuse change and proper patch prefix
per Thierry's request.

 drm/Kbuild                   |   1 +
 drm/core/subdev/volt/gk20a.c |   1 +
 nvkm/engine/device/nve0.c    |   1 +
 nvkm/include/subdev/volt.h   |   1 +
 nvkm/subdev/clock/gk20a.c    |  15 ++++
 nvkm/subdev/volt/gk20a.c     | 202 +++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 221 insertions(+)
 create mode 120000 drm/core/subdev/volt/gk20a.c
 create mode 100644 nvkm/subdev/volt/gk20a.c

diff --git a/drm/Kbuild b/drm/Kbuild
index 728bc5b66b29..7c49e6655066 100644
--- a/drm/Kbuild
+++ b/drm/Kbuild
@@ -225,6 +225,7 @@ nouveau-y += core/subdev/vm/nvc0.o
 nouveau-y += core/subdev/volt/base.o
 nouveau-y += core/subdev/volt/gpio.o
 nouveau-y += core/subdev/volt/nv40.o
+nouveau-y += core/subdev/volt/gk20a.o
 
 nouveau-y += core/engine/falcon.o
 nouveau-y += core/engine/xtensa.o
diff --git a/drm/core/subdev/volt/gk20a.c b/drm/core/subdev/volt/gk20a.c
new file mode 120000
index 000000000000..2894eb1ede13
--- /dev/null
+++ b/drm/core/subdev/volt/gk20a.c
@@ -0,0 +1 @@
+../../../../nvkm/subdev/volt/gk20a.c
\ No newline at end of file
diff --git a/nvkm/engine/device/nve0.c b/nvkm/engine/device/nve0.c
index b1b2e484ecfa..674da1f095b2 100644
--- a/nvkm/engine/device/nve0.c
+++ b/nvkm/engine/device/nve0.c
@@ -179,6 +179,7 @@ nve0_identify(struct nouveau_device *device)
 		device->oclass[NVDEV_ENGINE_GR     ] =  gk20a_graph_oclass;
 		device->oclass[NVDEV_ENGINE_COPY2  ] = &nve0_copy2_oclass;
 		device->oclass[NVDEV_ENGINE_PERFMON] = &nve0_perfmon_oclass;
+		device->oclass[NVDEV_SUBDEV_VOLT   ] = &gk20a_volt_oclass;
 		break;
 	case 0xf0:
 		device->cname = "GK110";
diff --git a/nvkm/include/subdev/volt.h b/nvkm/include/subdev/volt.h
index 820b62ffd75b..67db5e58880d 100644
--- a/nvkm/include/subdev/volt.h
+++ b/nvkm/include/subdev/volt.h
@@ -52,6 +52,7 @@ int  _nouveau_volt_init(struct nouveau_object *);
 #define _nouveau_volt_fini _nouveau_subdev_fini
 
 extern struct nouveau_oclass nv40_volt_oclass;
+extern struct nouveau_oclass gk20a_volt_oclass;
 
 int nouveau_voltgpio_init(struct nouveau_volt *);
 int nouveau_voltgpio_get(struct nouveau_volt *);
diff --git a/nvkm/subdev/clock/gk20a.c b/nvkm/subdev/clock/gk20a.c
index 82abbea2be12..fb4fad374bdd 100644
--- a/nvkm/subdev/clock/gk20a.c
+++ b/nvkm/subdev/clock/gk20a.c
@@ -470,76 +470,91 @@ gk20a_pstates[] = {
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 72000,
+			.voltage = 0,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 108000,
+			.voltage = 1,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 180000,
+			.voltage = 2,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 252000,
+			.voltage = 3,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 324000,
+			.voltage = 4,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 396000,
+			.voltage = 5,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 468000,
+			.voltage = 6,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 540000,
+			.voltage = 7,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 612000,
+			.voltage = 8,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 648000,
+			.voltage = 9,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 684000,
+			.voltage = 10,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 708000,
+			.voltage = 11,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 756000,
+			.voltage = 12,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 804000,
+			.voltage = 13,
 		},
 	},
 	{
 		.base = {
 			.domain[nv_clk_src_gpc] = 852000,
+			.voltage = 14,
 		},
 	},
 };
diff --git a/nvkm/subdev/volt/gk20a.c b/nvkm/subdev/volt/gk20a.c
new file mode 100644
index 000000000000..87385966e67f
--- /dev/null
+++ b/nvkm/subdev/volt/gk20a.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/regulator/consumer.h>
+#include <soc/tegra/fuse.h>
+
+#include <nouveau_platform.h>
+#include <subdev/volt.h>
+
+struct cvb_coef {
+	int c0;
+	int c1;
+	int c2;
+	int c3;
+	int c4;
+	int c5;
+};
+
+struct gk20a_volt_priv {
+	struct nouveau_volt base;
+	struct regulator *vdd;
+};
+
+const struct cvb_coef gk20a_cvb_coef[] = {
+	/* MHz,        c0,     c1,   c2,    c3,     c4,   c5 */
+	/*  72 */ { 1209886, -36468,  515,   417, -13123,  203},
+	/* 108 */ { 1130804, -27659,  296,   298, -10834,  221},
+	/* 180 */ { 1162871, -27110,  247,   238, -10681,  268},
+	/* 252 */ { 1220458, -28654,  247,   179, -10376,  298},
+	/* 324 */ { 1280953, -30204,  247,   119,  -9766,  304},
+	/* 396 */ { 1344547, -31777,  247,   119,  -8545,  292},
+	/* 468 */ { 1420168, -34227,  269,    60,  -7172,  256},
+	/* 540 */ { 1490757, -35955,  274,    60,  -5188,  197},
+	/* 612 */ { 1599112, -42583,  398,     0,  -1831,  119},
+	/* 648 */ { 1366986, -16459, -274,     0,  -3204,   72},
+	/* 684 */ { 1391884, -17078, -274,   -60,  -1526,   30},
+	/* 708 */ { 1415522, -17497, -274,   -60,   -458,    0},
+	/* 756 */ { 1464061, -18331, -274,  -119,   1831,  -72},
+	/* 804 */ { 1524225, -20064, -254,  -119,   4272, -155},
+	/* 852 */ { 1608418, -21643, -269,     0,    763,  -48},
+};
+
+/**
+ * cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0)
+ */
+static inline int
+gk20a_volt_get_cvb_voltage(int speedo, int s_scale,
+		const struct cvb_coef *coef)
+{
+	int mv;
+
+	mv = DIV_ROUND_CLOSEST(coef->c2 * speedo, s_scale);
+	mv = DIV_ROUND_CLOSEST((mv + coef->c1) * speedo, s_scale) + coef->c0;
+	return mv;
+}
+
+/**
+ * cvb_t_mv =
+ * ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) +
+ * ((c3 * speedo / s_scale + c4 + c5 * T / t_scale) * T / t_scale)
+ */
+static inline int
+gk20a_volt_get_cvb_t_voltage(int speedo, int temp, int s_scale, int t_scale,
+		const struct cvb_coef *coef)
+{
+	int cvb_mv, mv;
+
+	cvb_mv = gk20a_volt_get_cvb_voltage(speedo, s_scale, coef);
+
+	mv = DIV_ROUND_CLOSEST(coef->c3 * speedo, s_scale) + coef->c4 +
+		DIV_ROUND_CLOSEST(coef->c5 * temp, t_scale);
+	mv = DIV_ROUND_CLOSEST(mv * temp, t_scale) + cvb_mv;
+	return mv;
+}
+
+static int
+gk20a_volt_calc_voltage(const struct cvb_coef *coef)
+{
+	int speedo, mv;
+
+	speedo = tegra_sku_info.gpu_speedo_value;
+
+	mv = gk20a_volt_get_cvb_t_voltage(speedo, -10, 100, 10, coef);
+	mv = DIV_ROUND_UP(mv, 1000);
+
+	return mv * 1000;
+}
+
+static int
+gk20a_volt_vid_get(struct nouveau_volt *volt)
+{
+	struct gk20a_volt_priv *priv = (void *)volt;
+	int i, uv;
+
+	uv = regulator_get_voltage(priv->vdd);
+
+	for (i = 0; i < volt->vid_nr; i++)
+		if (volt->vid[i].uv >= uv)
+			return i;
+
+	return -EINVAL;
+}
+
+static int
+gk20a_volt_vid_set(struct nouveau_volt *volt, u8 vid)
+{
+	struct gk20a_volt_priv *priv = (void *)volt;
+
+	nv_debug(volt, "set voltage as %duv\n", volt->vid[vid].uv);
+	return regulator_set_voltage(priv->vdd, volt->vid[vid].uv, 1200000);
+}
+
+static int
+gk20a_volt_set_id(struct nouveau_volt *volt, u8 id, int condition)
+{
+	struct gk20a_volt_priv *priv = (void *)volt;
+	int prev_uv = regulator_get_voltage(priv->vdd);
+	int target_uv = volt->vid[id].uv;
+	int ret;
+
+	nv_debug(volt, "prev=%d, target=%d, condition=%d\n",
+			prev_uv, target_uv, condition);
+	if (!condition ||
+		(condition < 0 && target_uv < prev_uv) ||
+		(condition > 0 && target_uv > prev_uv)) {
+		ret = gk20a_volt_vid_set(volt, volt->vid[id].vid);
+	} else {
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int
+gk20a_volt_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
+	       struct nouveau_oclass *oclass, void *data, u32 size,
+	       struct nouveau_object **pobject)
+{
+	struct gk20a_volt_priv *priv;
+	struct nouveau_volt *volt;
+	struct nouveau_platform_device *plat;
+	int i, ret, uv;
+
+	ret = nouveau_volt_create(parent, engine, oclass, &priv);
+	*pobject = nv_object(priv);
+	if (ret)
+		return ret;
+
+	volt = &priv->base;
+
+	plat = nv_device_to_platform(nv_device(parent));
+
+	uv = regulator_get_voltage(plat->gpu->vdd);
+	nv_info(priv, "The default voltage is %duV\n", uv);
+
+	priv->vdd = plat->gpu->vdd;
+	priv->base.vid_get = gk20a_volt_vid_get;
+	priv->base.vid_set = gk20a_volt_vid_set;
+	priv->base.set_id = gk20a_volt_set_id;
+
+	volt->vid_nr = ARRAY_SIZE(gk20a_cvb_coef);
+	nv_debug(priv, "%s - vid_nr = %d\n", __func__, volt->vid_nr);
+	for (i = 0; i < volt->vid_nr; i++) {
+		volt->vid[i].vid = i;
+		volt->vid[i].uv = gk20a_volt_calc_voltage(&gk20a_cvb_coef[i]);
+		nv_debug(priv, "%2d: vid=%d, uv=%d\n", i, volt->vid[i].vid,
+					volt->vid[i].uv);
+	}
+
+	return 0;
+}
+
+struct nouveau_oclass
+gk20a_volt_oclass = {
+	.handle = NV_SUBDEV(VOLT, 0xea),
+	.ofuncs = &(struct nouveau_ofuncs) {
+		.ctor = gk20a_volt_ctor,
+		.dtor = _nouveau_volt_dtor,
+		.init = _nouveau_volt_init,
+		.fini = _nouveau_volt_fini,
+	},
+};
-- 
1.9.1

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: [RESEND PATCH nouveau 3/3] volt: add support for GK20A

[Martin Peres]

On 28/11/2014 12:13, Vince Hsu wrote:
> The voltage value are calculated by the hardware characterized
> result.
>
> Signed-off-by: Vince Hsu <vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>
> Resend this patch with the fuse change and proper patch prefix
> per Thierry's request.
Since the voltage table really is per-chipset, it would be insane
to add that to the DT. If it was not the case, it is still easier to
move to the DT instead of doing the opposite.

Acked-by: Martin Peres <martin.peres-GANU6spQydw@public.gmane.org>

Re: [Nouveau] [RESEND PATCH nouveau 3/3] volt: add support for GK20A

[Ben Skeggs]

On Tue, Dec 2, 2014 at 9:00 AM, Martin Peres <martin.peres-GANU6spQydw@public.gmane.org> wrote:
> On 28/11/2014 12:13, Vince Hsu wrote:
>>
>> The voltage value are calculated by the hardware characterized
>> result.
>>
>> Signed-off-by: Vince Hsu <vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>
>> Resend this patch with the fuse change and proper patch prefix
>> per Thierry's request.
>
> Since the voltage table really is per-chipset, it would be insane
> to add that to the DT. If it was not the case, it is still easier to
> move to the DT instead of doing the opposite.
>
One thing that needs fixing is that this breaks the build on non-tegra arches.

> Acked-by: Martin Peres <martin.peres-GANU6spQydw@public.gmane.org>
>
> _______________________________________________
> Nouveau mailing list
> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: [RESEND V2 PATCH 1/3] soc/tegra: fuse: export tegra_sku_info for module use

[Alexandre Courbot]

On Fri, Nov 28, 2014 at 8:12 PM, Vince Hsu <vinceh@nvidia.com> wrote:
> Some Tegra drivers might be complied as kernel modules, and
> they need the fuse information for initialization. One
> example is the GK20A Nouveau driver. It needs the GPU speedo
> value to calculate frequency-voltage table. So export
> the tegra_sku_info.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>

This is required for setting the optimal GPU voltage in Nouveau.
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: [RESEND V2 PATCH 1/3] soc/tegra: fuse: export tegra_sku_info for module use

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1222 bytes --]

I think the subject doesn't need "for module use" because that's
implicit in exporting a symbol.

On Fri, Nov 28, 2014 at 07:12:58PM +0800, Vince Hsu wrote:
> Some Tegra drivers might be complied as kernel modules, and

"compiled"

> they need the fuse information for initialization. One
> example is the GK20A Nouveau driver. It needs the GPU speedo
> value to calculate frequency-voltage table. So export
> the tegra_sku_info.

Also please wrap the commit message at around 72 characters. If you make
the lines too short it becomes almost as difficult to readable as if
they're too long.

Other than these small nitpicks this looks like a reasonable change to
me.

> 
> Signed-off-by: Vince Hsu <vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> 
> v2: add more description why we need this patch
> 
>  drivers/soc/tegra/fuse/fuse-tegra.c | 1 +
>  1 file changed, 1 insertion(+)

Ben, patch 3/3 has a dependency on this one. Would you prefer to merge
this as part of the Nouveau tree or do you want me to provide a stable
branch that you can pull in to resolve the dependency?

In case of the former:

Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [Nouveau] [RESEND V2 PATCH 1/3] soc/tegra: fuse: export tegra_sku_info for module use

[Ben Skeggs]

On Mon, Dec 1, 2014 at 8:01 PM, Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> I think the subject doesn't need "for module use" because that's
> implicit in exporting a symbol.
>
> On Fri, Nov 28, 2014 at 07:12:58PM +0800, Vince Hsu wrote:
>> Some Tegra drivers might be complied as kernel modules, and
>
> "compiled"
>
>> they need the fuse information for initialization. One
>> example is the GK20A Nouveau driver. It needs the GPU speedo
>> value to calculate frequency-voltage table. So export
>> the tegra_sku_info.
>
> Also please wrap the commit message at around 72 characters. If you make
> the lines too short it becomes almost as difficult to readable as if
> they're too long.
>
> Other than these small nitpicks this looks like a reasonable change to
> me.
>
>>
>> Signed-off-by: Vince Hsu <vinceh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>
>> v2: add more description why we need this patch
>>
>>  drivers/soc/tegra/fuse/fuse-tegra.c | 1 +
>>  1 file changed, 1 insertion(+)
>
> Ben, patch 3/3 has a dependency on this one. Would you prefer to merge
> this as part of the Nouveau tree or do you want me to provide a stable
> branch that you can pull in to resolve the dependency?
I'll take the patch, seems the simplest option :)

Thanks,
Ben.

>
> In case of the former:
>
> Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> _______________________________________________
> Nouveau mailing list
> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau
>