Re: [PATCH 5.1 000/138] 5.1.18-stable review

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Jon Hunter]

Hi Greg,

On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.1.18 release.
> There are 138 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:

...

> Keerthy <j-keerthy@ti.com>
>     ARM: dts: dra71x: Disable usb4_tm target module

...

> Keerthy <j-keerthy@ti.com>
>     ARM: dts: dra76x: Disable usb4_tm target module

The above commits are generating the following compilation errors for
ARM ...

Error:
/dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
Label or path usb4_tm not found

Error:
/dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
Label or path usb4_tm not found

After reverting these two, I no longer see these errors.

Cheers,
Jon

-- 
nvpublic

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Greg Kroah-Hartman]

On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> Hi Greg,
> 
> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.1.18 release.
> > There are 138 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> > Pseudo-Shortlog of commits:
> 
> ...
> 
> > Keerthy <j-keerthy@ti.com>
> >     ARM: dts: dra71x: Disable usb4_tm target module
> 
> ...
> 
> > Keerthy <j-keerthy@ti.com>
> >     ARM: dts: dra76x: Disable usb4_tm target module
> 
> The above commits are generating the following compilation errors for
> ARM ...
> 
> Error:
> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
> Label or path usb4_tm not found
> 
> Error:
> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
> Label or path usb4_tm not found
> 
> After reverting these two, I no longer see these errors.

Both are now dropped, thanks.  I'll push out a -rc2 with that changed.

greg k-h

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Guenter Roeck]

On Fri, Jul 12, 2019 at 05:30:35PM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> > Hi Greg,
> > 
> > On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.1.18 release.
> > > There are 138 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> > > Anything received after that time might be too late.
> > > 
> > > The whole patch series can be found in one patch at:
> > > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> > > or in the git tree and branch at:
> > > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> > > and the diffstat can be found below.
> > > 
> > > thanks,
> > > 
> > > greg k-h
> > > 
> > > -------------
> > > Pseudo-Shortlog of commits:
> > 
> Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
> 

Can you push that update into the git repository ?
v5.1.17-137-gde182b90f76d still has the problem.

Also:

Building powerpc:ppc6xx_defconfig ... failed

drivers/crypto/talitos.c: In function ‘get_request_hdr’:
include/linux/kernel.h:979:51: error:
	dereferencing pointer to incomplete type ‘struct talitos_edesc’

Seen with both v4.19.58-92-gd66f8e7 and v5.1.17-137-gde182b90f76d.

This problem is caused by "crypto: talitos - fix hash on SEC1.", which will
need a proper backport - struct talitos_edesc is declared later in the
source file.

Guenter

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Greg Kroah-Hartman]

On Fri, Jul 12, 2019 at 01:21:41PM -0700, Guenter Roeck wrote:
> On Fri, Jul 12, 2019 at 05:30:35PM +0200, Greg Kroah-Hartman wrote:
> > On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> > > Hi Greg,
> > > 
> > > On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 5.1.18 release.
> > > > There are 138 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> > > > Anything received after that time might be too late.
> > > > 
> > > > The whole patch series can be found in one patch at:
> > > > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> > > > or in the git tree and branch at:
> > > > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> > > > and the diffstat can be found below.
> > > > 
> > > > thanks,
> > > > 
> > > > greg k-h
> > > > 
> > > > -------------
> > > > Pseudo-Shortlog of commits:
> > > 
> > Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
> > 
> 
> Can you push that update into the git repository ?
> v5.1.17-137-gde182b90f76d still has the problem.

Odd, I thought I did this.  Pushed out again just to be sure.

> Also:
> 
> Building powerpc:ppc6xx_defconfig ... failed
> 
> drivers/crypto/talitos.c: In function ‘get_request_hdr’:
> include/linux/kernel.h:979:51: error:
> 	dereferencing pointer to incomplete type ‘struct talitos_edesc’
> 
> Seen with both v4.19.58-92-gd66f8e7 and v5.1.17-137-gde182b90f76d.
> 
> This problem is caused by "crypto: talitos - fix hash on SEC1.", which will
> need a proper backport - struct talitos_edesc is declared later in the
> source file.

Ick, let me go drop this one after breakfast...

greg k-h

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Guenter Roeck]

On 7/13/19 1:22 AM, Greg Kroah-Hartman wrote:
> On Fri, Jul 12, 2019 at 01:21:41PM -0700, Guenter Roeck wrote:
>> On Fri, Jul 12, 2019 at 05:30:35PM +0200, Greg Kroah-Hartman wrote:
>>> On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
>>>> Hi Greg,
>>>>
>>>> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
>>>>> This is the start of the stable review cycle for the 5.1.18 release.
>>>>> There are 138 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
>>>>> or in the git tree and branch at:
>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>>
>>>>> -------------
>>>>> Pseudo-Shortlog of commits:
>>>>
>>> Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
>>>
>>
>> Can you push that update into the git repository ?
>> v5.1.17-137-gde182b90f76d still has the problem.
> 
> Odd, I thought I did this.  Pushed out again just to be sure.
> 
Problem is still seen in -rc2.

>> Also:
>>
>> Building powerpc:ppc6xx_defconfig ... failed
>>
>> drivers/crypto/talitos.c: In function ‘get_request_hdr’:
>> include/linux/kernel.h:979:51: error:
>> 	dereferencing pointer to incomplete type ‘struct talitos_edesc’
>>
>> Seen with both v4.19.58-92-gd66f8e7 and v5.1.17-137-gde182b90f76d.
>>
>> This problem is caused by "crypto: talitos - fix hash on SEC1.", which will
>> need a proper backport - struct talitos_edesc is declared later in the
>> source file.
> 
> Ick, let me go drop this one after breakfast...
> 

Turns out this affects all three branches (v4.19. v5.1, and v5.2).

Guenter

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Greg Kroah-Hartman]

On Sat, Jul 13, 2019 at 06:16:56AM -0700, Guenter Roeck wrote:
> On 7/13/19 1:22 AM, Greg Kroah-Hartman wrote:
> > On Fri, Jul 12, 2019 at 01:21:41PM -0700, Guenter Roeck wrote:
> > > On Fri, Jul 12, 2019 at 05:30:35PM +0200, Greg Kroah-Hartman wrote:
> > > > On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> > > > > Hi Greg,
> > > > > 
> > > > > On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> > > > > > This is the start of the stable review cycle for the 5.1.18 release.
> > > > > > There are 138 patches in this series, all will be posted as a response
> > > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > > let me know.
> > > > > > 
> > > > > > Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> > > > > > Anything received after that time might be too late.
> > > > > > 
> > > > > > The whole patch series can be found in one patch at:
> > > > > > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> > > > > > or in the git tree and branch at:
> > > > > > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> > > > > > and the diffstat can be found below.
> > > > > > 
> > > > > > thanks,
> > > > > > 
> > > > > > greg k-h
> > > > > > 
> > > > > > -------------
> > > > > > Pseudo-Shortlog of commits:
> > > > > 
> > > > Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
> > > > 
> > > 
> > > Can you push that update into the git repository ?
> > > v5.1.17-137-gde182b90f76d still has the problem.
> > 
> > Odd, I thought I did this.  Pushed out again just to be sure.
> > 
> Problem is still seen in -rc2.

Ugh, I dropped one, but not the other, now both gone.  I'll push out
updates in a bit.

> > > Also:
> > > 
> > > Building powerpc:ppc6xx_defconfig ... failed
> > > 
> > > drivers/crypto/talitos.c: In function ‘get_request_hdr’:
> > > include/linux/kernel.h:979:51: error:
> > > 	dereferencing pointer to incomplete type ‘struct talitos_edesc’
> > > 
> > > Seen with both v4.19.58-92-gd66f8e7 and v5.1.17-137-gde182b90f76d.
> > > 
> > > This problem is caused by "crypto: talitos - fix hash on SEC1.", which will
> > > need a proper backport - struct talitos_edesc is declared later in the
> > > source file.
> > 
> > Ick, let me go drop this one after breakfast...
> > 
> 
> Turns out this affects all three branches (v4.19. v5.1, and v5.2).

Ok, dropping it now (sorry, longer than just breakfast...)

greg k-h

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Jon Hunter]

On 12/07/2019 16:30, Greg Kroah-Hartman wrote:
> On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
>> Hi Greg,
>>
>> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 5.1.18 release.
>>> There are 138 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
>>> or in the git tree and branch at:
>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>> -------------
>>> Pseudo-Shortlog of commits:
>>
>> ...
>>
>>> Keerthy <j-keerthy@ti.com>
>>>     ARM: dts: dra71x: Disable usb4_tm target module
>>
>> ...
>>
>>> Keerthy <j-keerthy@ti.com>
>>>     ARM: dts: dra76x: Disable usb4_tm target module
>>
>> The above commits are generating the following compilation errors for
>> ARM ...
>>
>> Error:
>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
>> Label or path usb4_tm not found
>>
>> Error:
>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
>> Label or path usb4_tm not found
>>
>> After reverting these two, I no longer see these errors.
> 
> Both are now dropped, thanks.  I'll push out a -rc2 with that changed.

Hmmm ... -rc2 still not building ...

Error:
/dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:11.1-11
Label or path rtctarget not found
Error:
/dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
Label or path usb4_tm not found

I still see the following commit in -rc2 ...

commit 0caa574b3244cd863dd74bde680a6309cb8803ad
Author: Keerthy <j-keerthy@ti.com>
Date:   Fri May 17 06:44:09 2019 +0530

    ARM: dts: dra71x: Disable usb4_tm target module

In -rc1 I see there were 4 changes from Keerthy, any chance you reverted
one of the rtc patches and not the above? Looks like the following is
missing from -rc2 ...

Keerthy <j-keerthy@ti.com>
    ARM: dts: dra76x: Disable rtc target module

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Greg Kroah-Hartman]

On Sat, Jul 13, 2019 at 10:16:58AM +0100, Jon Hunter wrote:
> 
> On 12/07/2019 16:30, Greg Kroah-Hartman wrote:
> > On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> >> Hi Greg,
> >>
> >> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> >>> This is the start of the stable review cycle for the 5.1.18 release.
> >>> There are 138 patches in this series, all will be posted as a response
> >>> to this one.  If anyone has any issues with these being applied, please
> >>> let me know.
> >>>
> >>> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> >>> Anything received after that time might be too late.
> >>>
> >>> The whole patch series can be found in one patch at:
> >>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> >>> or in the git tree and branch at:
> >>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> >>> and the diffstat can be found below.
> >>>
> >>> thanks,
> >>>
> >>> greg k-h
> >>>
> >>> -------------
> >>> Pseudo-Shortlog of commits:
> >>
> >> ...
> >>
> >>> Keerthy <j-keerthy@ti.com>
> >>>     ARM: dts: dra71x: Disable usb4_tm target module
> >>
> >> ...
> >>
> >>> Keerthy <j-keerthy@ti.com>
> >>>     ARM: dts: dra76x: Disable usb4_tm target module
> >>
> >> The above commits are generating the following compilation errors for
> >> ARM ...
> >>
> >> Error:
> >> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
> >> Label or path usb4_tm not found
> >>
> >> Error:
> >> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
> >> Label or path usb4_tm not found
> >>
> >> After reverting these two, I no longer see these errors.
> > 
> > Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
> 
> Hmmm ... -rc2 still not building ...
> 
> Error:
> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:11.1-11
> Label or path rtctarget not found
> Error:
> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
> Label or path usb4_tm not found
> 
> I still see the following commit in -rc2 ...
> 
> commit 0caa574b3244cd863dd74bde680a6309cb8803ad
> Author: Keerthy <j-keerthy@ti.com>
> Date:   Fri May 17 06:44:09 2019 +0530
> 
>     ARM: dts: dra71x: Disable usb4_tm target module
> 
> In -rc1 I see there were 4 changes from Keerthy, any chance you reverted
> one of the rtc patches and not the above? Looks like the following is
> missing from -rc2 ...
> 
> Keerthy <j-keerthy@ti.com>
>     ARM: dts: dra76x: Disable rtc target module

Sorry, I dropped one, but not the other.  Both now gone.

thanks,

greg k-h

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Jon Hunter]

On 13/07/2019 15:31, Greg Kroah-Hartman wrote:
> On Sat, Jul 13, 2019 at 10:16:58AM +0100, Jon Hunter wrote:
>>
>> On 12/07/2019 16:30, Greg Kroah-Hartman wrote:
>>> On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
>>>> Hi Greg,
>>>>
>>>> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
>>>>> This is the start of the stable review cycle for the 5.1.18 release.
>>>>> There are 138 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
>>>>> or in the git tree and branch at:
>>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>>
>>>>> -------------
>>>>> Pseudo-Shortlog of commits:
>>>>
>>>> ...
>>>>
>>>>> Keerthy <j-keerthy@ti.com>
>>>>>     ARM: dts: dra71x: Disable usb4_tm target module
>>>>
>>>> ...
>>>>
>>>>> Keerthy <j-keerthy@ti.com>
>>>>>     ARM: dts: dra76x: Disable usb4_tm target module
>>>>
>>>> The above commits are generating the following compilation errors for
>>>> ARM ...
>>>>
>>>> Error:
>>>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
>>>> Label or path usb4_tm not found
>>>>
>>>> Error:
>>>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
>>>> Label or path usb4_tm not found
>>>>
>>>> After reverting these two, I no longer see these errors.
>>>
>>> Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
>>
>> Hmmm ... -rc2 still not building ...
>>
>> Error:
>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:11.1-11
>> Label or path rtctarget not found
>> Error:
>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
>> Label or path usb4_tm not found
>>
>> I still see the following commit in -rc2 ...
>>
>> commit 0caa574b3244cd863dd74bde680a6309cb8803ad
>> Author: Keerthy <j-keerthy@ti.com>
>> Date:   Fri May 17 06:44:09 2019 +0530
>>
>>     ARM: dts: dra71x: Disable usb4_tm target module
>>
>> In -rc1 I see there were 4 changes from Keerthy, any chance you reverted
>> one of the rtc patches and not the above? Looks like the following is
>> missing from -rc2 ...
>>
>> Keerthy <j-keerthy@ti.com>
>>     ARM: dts: dra76x: Disable rtc target module
> 
> Sorry, I dropped one, but not the other.  Both now gone.

Great! This looks better. All tests passing now ...

Test results for stable-v5.1:
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	5.1.18-rc3-gd68c746af314
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.1 000/138] 5.1.18-stable review

[Greg Kroah-Hartman]

On Sat, Jul 13, 2019 at 07:56:55PM +0100, Jon Hunter wrote:
> 
> On 13/07/2019 15:31, Greg Kroah-Hartman wrote:
> > On Sat, Jul 13, 2019 at 10:16:58AM +0100, Jon Hunter wrote:
> >>
> >> On 12/07/2019 16:30, Greg Kroah-Hartman wrote:
> >>> On Fri, Jul 12, 2019 at 02:26:57PM +0100, Jon Hunter wrote:
> >>>> Hi Greg,
> >>>>
> >>>> On 12/07/2019 13:17, Greg Kroah-Hartman wrote:
> >>>>> This is the start of the stable review cycle for the 5.1.18 release.
> >>>>> There are 138 patches in this series, all will be posted as a response
> >>>>> to this one.  If anyone has any issues with these being applied, please
> >>>>> let me know.
> >>>>>
> >>>>> Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC.
> >>>>> Anything received after that time might be too late.
> >>>>>
> >>>>> The whole patch series can be found in one patch at:
> >>>>> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.1.18-rc1.gz
> >>>>> or in the git tree and branch at:
> >>>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.1.y
> >>>>> and the diffstat can be found below.
> >>>>>
> >>>>> thanks,
> >>>>>
> >>>>> greg k-h
> >>>>>
> >>>>> -------------
> >>>>> Pseudo-Shortlog of commits:
> >>>>
> >>>> ...
> >>>>
> >>>>> Keerthy <j-keerthy@ti.com>
> >>>>>     ARM: dts: dra71x: Disable usb4_tm target module
> >>>>
> >>>> ...
> >>>>
> >>>>> Keerthy <j-keerthy@ti.com>
> >>>>>     ARM: dts: dra76x: Disable usb4_tm target module
> >>>>
> >>>> The above commits are generating the following compilation errors for
> >>>> ARM ...
> >>>>
> >>>> Error:
> >>>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
> >>>> Label or path usb4_tm not found
> >>>>
> >>>> Error:
> >>>> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra76x.dtsi:89.1-9
> >>>> Label or path usb4_tm not found
> >>>>
> >>>> After reverting these two, I no longer see these errors.
> >>>
> >>> Both are now dropped, thanks.  I'll push out a -rc2 with that changed.
> >>
> >> Hmmm ... -rc2 still not building ...
> >>
> >> Error:
> >> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:11.1-11
> >> Label or path rtctarget not found
> >> Error:
> >> /dvs/git/dirty/git-master_l4t-upstream/kernel/arch/arm/boot/dts/dra71x.dtsi:15.1-9
> >> Label or path usb4_tm not found
> >>
> >> I still see the following commit in -rc2 ...
> >>
> >> commit 0caa574b3244cd863dd74bde680a6309cb8803ad
> >> Author: Keerthy <j-keerthy@ti.com>
> >> Date:   Fri May 17 06:44:09 2019 +0530
> >>
> >>     ARM: dts: dra71x: Disable usb4_tm target module
> >>
> >> In -rc1 I see there were 4 changes from Keerthy, any chance you reverted
> >> one of the rtc patches and not the above? Looks like the following is
> >> missing from -rc2 ...
> >>
> >> Keerthy <j-keerthy@ti.com>
> >>     ARM: dts: dra76x: Disable rtc target module
> > 
> > Sorry, I dropped one, but not the other.  Both now gone.
> 
> Great! This looks better. All tests passing now ...
> 
> Test results for stable-v5.1:
>     12 builds:	12 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     32 tests:	32 pass, 0 fail
> 
> Linux version:	5.1.18-rc3-gd68c746af314
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04

Wonderful, thanks for testing and letting me know.

greg k-h