From: Thierry Reding <thierry.reding@gmail.com>
To: Joerg Roedel <joro@8bytes.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Robin Murphy <robin.murphy@arm.com>
Cc: Thierry Reding <treding@nvidia.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Prathamesh Shete <pshete@nvidia.com>,
Will Deacon <will@kernel.org>,
iommu@lists.linux-foundation.org, linux-mmc@vger.kernel.org,
linux-tegra@vger.kernel.org
Subject: [PATCH v11 5/6] mmc: sdhci-tegra: Add support to program MC stream ID
Date: Thu, 17 Nov 2022 19:27:19 +0100 [thread overview]
Message-ID: <20221117182720.2290761-6-thierry.reding@gmail.com> (raw)
In-Reply-To: <20221117182720.2290761-1-thierry.reding@gmail.com>
From: Prathamesh Shete <pshete@nvidia.com>
SMMU clients are supposed to program stream ID from
their respective address spaces instead of MC override.
Define NVQUIRK_PROGRAM_STREAMID and use it to program
SMMU stream ID from the SDMMC client address space.
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index bbe2bc238171..1cb7fd3afa7e 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -4,6 +4,7 @@
*/
#include <linux/bitfield.h>
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -11,6 +12,7 @@
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/iommu.h>
#include <linux/iopoll.h>
#include <linux/ktime.h>
#include <linux/mmc/card.h>
@@ -96,6 +98,8 @@
#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
#define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
+#define SDHCI_TEGRA_CIF2AXI_CTRL_0 0x1fc
+
#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
@@ -123,6 +127,7 @@
#define NVQUIRK_HAS_TMCLK BIT(10)
#define NVQUIRK_HAS_ANDROID_GPT_SECTOR BIT(11)
+#define NVQUIRK_PROGRAM_STREAMID BIT(12)
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
@@ -179,6 +184,7 @@ struct sdhci_tegra {
bool enable_hwcq;
unsigned long curr_clk_rate;
u8 tuned_tap_delay;
+ u32 stream_id;
};
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -1566,6 +1572,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra234 = {
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104 |
+ NVQUIRK_PROGRAM_STREAMID |
NVQUIRK_HAS_TMCLK,
.min_tap_delay = 95,
.max_tap_delay = 111,
@@ -1632,6 +1639,19 @@ static int sdhci_tegra_add_host(struct sdhci_host *host)
return ret;
}
+/* Program MC streamID for DMA transfers */
+static void sdhci_tegra_program_stream_id(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+
+ if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_STREAMID) {
+ tegra_sdhci_writel(host, FIELD_PREP(GENMASK(15, 8), tegra_host->stream_id) |
+ FIELD_PREP(GENMASK( 7, 0), tegra_host->stream_id),
+ SDHCI_TEGRA_CIF2AXI_CTRL_0);
+ }
+}
+
static int sdhci_tegra_probe(struct platform_device *pdev)
{
const struct sdhci_tegra_soc_data *soc_data;
@@ -1692,6 +1712,12 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
tegra_sdhci_parse_dt(host);
+ if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_STREAMID &&
+ !tegra_dev_iommu_get_stream_id(&pdev->dev, &tegra_host->stream_id)) {
+ dev_warn(mmc_dev(host->mmc), "missing IOMMU stream ID\n");
+ tegra_host->stream_id = 0x7f;
+ }
+
tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
GPIOD_OUT_HIGH);
if (IS_ERR(tegra_host->power_gpio)) {
@@ -1777,6 +1803,8 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
if (rc)
goto err_add_host;
+ sdhci_tegra_program_stream_id(host);
+
return 0;
err_add_host:
@@ -1873,6 +1901,8 @@ static int sdhci_tegra_resume(struct device *dev)
if (ret)
return ret;
+ sdhci_tegra_program_stream_id(host);
+
ret = sdhci_resume_host(host);
if (ret)
goto disable_clk;
--
2.38.1
next prev parent reply other threads:[~2022-11-17 18:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-17 18:27 [PATCH v11 0/6] mmc: sdhci: Add Tegra234 support Thierry Reding
2022-11-17 18:27 ` [PATCH v11 1/6] iommu: Add note about struct iommu_fwspec usage Thierry Reding
2022-11-19 9:51 ` Joerg Roedel
2022-11-17 18:27 ` [PATCH v11 2/6] iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper Thierry Reding
2022-11-18 8:08 ` Ulf Hansson
2022-12-02 10:31 ` Thierry Reding
2022-11-17 18:27 ` [PATCH v11 3/6] mmc: sdhci-tegra: Sort includes alphabetically Thierry Reding
2022-11-18 7:32 ` Adrian Hunter
2022-11-18 8:01 ` Ulf Hansson
2022-11-17 18:27 ` [PATCH v11 4/6] mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data Thierry Reding
2022-11-17 18:27 ` Thierry Reding [this message]
2022-11-17 18:27 ` [PATCH v11 6/6] mmc: sdhci-tegra: Issue CMD and DAT resets together Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221117182720.2290761-6-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jonathanh@nvidia.com \
--cc=joro@8bytes.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pshete@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=treding@nvidia.com \
--cc=ulf.hansson@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox