[PATCH 2/2] arm64: tegra: Add a few blank lines for better readability

[Thierry Reding <thierry.reding@gmail.com>]

From: Thierry Reding <treding@nvidia.com>

Surround device tree nodes with blank lines for increased readability.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index e499010fc673..5f3d6dcf10a2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2247,6 +2247,7 @@ TEGRA234_AON_GPIO(AA, 4)
 
 		i2c@c240000 {
 			status = "okay";
+
 			typec@8 {
 				compatible = "cypress,cypd4226";
 				reg = <0x08>;
@@ -2254,22 +2255,27 @@ typec@8 {
 				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
 				firmware-name = "nvidia,jetson-agx-xavier";
 				status = "okay";
+
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				ccg_typec_con0: connector@0 {
 					compatible = "usb-c-connector";
 					reg = <0>;
 					label = "USB-C";
 					data-role = "host";
+
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
 						port@0 {
 							reg = <0>;
 							hs_ucsi_ccg_p0: endpoint {
 								remote-endpoint = <&hs_typec_p0>;
 							};
 						};
+
 						port@1 {
 							reg = <1>;
 							ss_ucsi_ccg_p0: endpoint {
@@ -2278,20 +2284,24 @@ ss_ucsi_ccg_p0: endpoint {
 						};
 					};
 				};
+
 				ccg_typec_con1: connector@1 {
 					compatible = "usb-c-connector";
 					reg = <1>;
 					label = "USB-C";
 					data-role = "dual";
+
 					ports {
 						#address-cells = <1>;
 						#size-cells = <0>;
+
 						port@0 {
 							reg = <0>;
 							hs_ucsi_ccg_p1: endpoint {
 								remote-endpoint = <&hs_typec_p1>;
 							};
 						};
+
 						port@1 {
 							reg = <1>;
 							ss_ucsi_ccg_p1: endpoint {
-- 
2.40.1