Re: [PATCH 2/2] arm64: tegra: Add a few blank lines for better readability

[Jon Hunter <jonathanh@nvidia.com>]

On 09/06/2023 11:55, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Surround device tree nodes with blank lines for increased readability.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>   .../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> index e499010fc673..5f3d6dcf10a2 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> @@ -2247,6 +2247,7 @@ TEGRA234_AON_GPIO(AA, 4)
>   
>   		i2c@c240000 {
>   			status = "okay";
> +
>   			typec@8 {
>   				compatible = "cypress,cypd4226";
>   				reg = <0x08>;
> @@ -2254,22 +2255,27 @@ typec@8 {
>   				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
>   				firmware-name = "nvidia,jetson-agx-xavier";
>   				status = "okay";
> +
>   				#address-cells = <1>;
>   				#size-cells = <0>;
> +
>   				ccg_typec_con0: connector@0 {
>   					compatible = "usb-c-connector";
>   					reg = <0>;
>   					label = "USB-C";
>   					data-role = "host";
> +
>   					ports {
>   						#address-cells = <1>;
>   						#size-cells = <0>;
> +
>   						port@0 {
>   							reg = <0>;
>   							hs_ucsi_ccg_p0: endpoint {
>   								remote-endpoint = <&hs_typec_p0>;
>   							};
>   						};
> +
>   						port@1 {
>   							reg = <1>;
>   							ss_ucsi_ccg_p0: endpoint {
> @@ -2278,20 +2284,24 @@ ss_ucsi_ccg_p0: endpoint {
>   						};
>   					};
>   				};
> +
>   				ccg_typec_con1: connector@1 {
>   					compatible = "usb-c-connector";
>   					reg = <1>;
>   					label = "USB-C";
>   					data-role = "dual";
> +
>   					ports {
>   						#address-cells = <1>;
>   						#size-cells = <0>;
> +
>   						port@0 {
>   							reg = <0>;
>   							hs_ucsi_ccg_p1: endpoint {
>   								remote-endpoint = <&hs_typec_p1>;
>   							};
>   						};
> +
>   						port@1 {
>   							reg = <1>;
>   							ss_ucsi_ccg_p1: endpoint {


Acked-by: Jon Hunter <jonathanh@nvidia.com>

Jon

-- 
nvpublic