[PATCH 1/3] clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support

[PATCH 1/3] clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support

[Robert Lin]

From: Pohsun Su <pohsuns@nvidia.com>

This change adds support for WDIOC_GETTIMELEFT so userspace
programs can get the number of seconds before system reset by
the watchdog timer via ioctl.

Signed-off-by: Pohsun Su <pohsuns@nvidia.com>
Signed-off-by: Robert Lin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 56 +++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index ea742889ee06..201b24ca59f4 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2019-2025 NVIDIA Corporation. All rights reserved.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clocksource.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -30,6 +31,7 @@
 
 #define TMRSR 0x004
 #define  TMRSR_INTR_CLR BIT(30)
+#define  TMRSR_PCV GENMASK(28, 0)
 
 #define TMRCSSR 0x008
 #define  TMRCSSR_SRC_USEC (0 << 0)
@@ -46,6 +48,9 @@
 #define  WDTCR_TIMER_SOURCE_MASK 0xf
 #define  WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
 
+#define WDTSR 0x004
+#define  WDTSR_CURRENT_EXPIRATION_COUNT GENMASK(14, 12)
+
 #define WDTCMDR 0x008
 #define  WDTCMDR_DISABLE_COUNTER BIT(1)
 #define  WDTCMDR_START_COUNTER BIT(0)
@@ -235,12 +240,61 @@ static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static unsigned int tegra186_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+	u32 timeleft, expiration, val;
+
+	if (!watchdog_active(&wdt->base)) {
+		/* return zero if the watchdog timer is not activated. */
+		return 0;
+	}
+
+	/*
+	 * Reset occurs on the fifth expiration of the
+	 * watchdog timer and so when the watchdog timer is configured,
+	 * the actual value programmed into the counter is 1/5 of the
+	 * timeout value. Once the counter reaches 0, expiration count
+	 * will be increased by 1 and the down counter restarts.
+	 * Hence to get the time left before system reset we must
+	 * combine 2 parts:
+	 * 1. value of the current down counter
+	 * 2. (number of counter expirations remaining) * (timeout/5)
+	 */
+
+	/* Get the current number of counter expirations. Should be a
+	 * value between 0 and 4
+	 */
+	val = readl_relaxed(wdt->regs + WDTSR);
+	expiration = FIELD_GET(WDTSR_CURRENT_EXPIRATION_COUNT, val);
+
+	/* Get the current counter value in microsecond.
+	 */
+	val = readl_relaxed(wdt->tmr->regs + TMRSR);
+	timeleft = FIELD_GET(TMRSR_PCV, val);
+
+	/*
+	 * Calculate the time remaining by adding the time for the
+	 * counter value to the time of the counter expirations that
+	 * remain. Do the multiplication first on purpose just to keep
+	 * the precision due to the integer division.
+	 */
+	timeleft += wdt->base.timeout * (4 - expiration) / 5;
+	/*
+	 * Convert the current counter value to seconds,
+	 * rounding up to the nearest second.
+	 */
+	timeleft = (timeleft + USEC_PER_SEC / 2) / USEC_PER_SEC;
+	return timeleft;
+}
+
 static const struct watchdog_ops tegra186_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = tegra186_wdt_start,
 	.stop = tegra186_wdt_stop,
 	.ping = tegra186_wdt_ping,
 	.set_timeout = tegra186_wdt_set_timeout,
+	.get_timeleft = tegra186_wdt_get_timeleft,
 };
 
 static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
-- 
2.34.1

[PATCH 2/3] clocksource/drivers/timer-tegra186: fix watchdog self-pinging

[Robert Lin]

From: Pohsun Su <pohsuns@nvidia.com>

This change removes watchdog self-pinging behavior.

The timer irq handler is triggered due to the 1st expiration,
the handler disables and enables watchdog but also implicitly
clears the expiration count so the count can only be 0 or 1.

Since this watchdog supports opened, configured, or pinged by
systemd, We remove this behavior or the watchdog may not bark
when systemd crashes since the 5th expiration never comes.

Signed-off-by: Pohsun Su <pohsuns@nvidia.com>
Signed-off-by: Robert Lin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index 201b24ca59f4..708d9f8682ea 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -175,9 +175,6 @@ static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
 		value &= ~WDTCR_PERIOD_MASK;
 		value |= WDTCR_PERIOD(1);
 
-		/* enable local interrupt for WDT petting */
-		value |= WDTCR_LOCAL_INT_ENABLE;
-
 		/* enable local FIQ and remote interrupt for debug dump */
 		if (0)
 			value |= WDTCR_REMOTE_INT_ENABLE |
@@ -420,23 +417,10 @@ static int tegra186_timer_usec_init(struct tegra186_timer *tegra)
 	return clocksource_register_hz(&tegra->usec, USEC_PER_SEC);
 }
 
-static irqreturn_t tegra186_timer_irq(int irq, void *data)
-{
-	struct tegra186_timer *tegra = data;
-
-	if (watchdog_active(&tegra->wdt->base)) {
-		tegra186_wdt_disable(tegra->wdt);
-		tegra186_wdt_enable(tegra->wdt);
-	}
-
-	return IRQ_HANDLED;
-}
-
 static int tegra186_timer_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct tegra186_timer *tegra;
-	unsigned int irq;
 	int err;
 
 	tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
@@ -455,8 +439,6 @@ static int tegra186_timer_probe(struct platform_device *pdev)
 	if (err < 0)
 		return err;
 
-	irq = err;
-
 	/* create a watchdog using a preconfigured timer */
 	tegra->wdt = tegra186_wdt_create(tegra, 0);
 	if (IS_ERR(tegra->wdt)) {
@@ -483,17 +465,8 @@ static int tegra186_timer_probe(struct platform_device *pdev)
 		goto unregister_osc;
 	}
 
-	err = devm_request_irq(dev, irq, tegra186_timer_irq, 0,
-			       "tegra186-timer", tegra);
-	if (err < 0) {
-		dev_err(dev, "failed to request IRQ#%u: %d\n", irq, err);
-		goto unregister_usec;
-	}
-
 	return 0;
 
-unregister_usec:
-	clocksource_unregister(&tegra->usec);
 unregister_osc:
 	clocksource_unregister(&tegra->osc);
 unregister_tsc:
-- 
2.34.1

[PATCH 3/3] clocksource/drivers/timer-tegra186: Remove unused bits

[Robert Lin]

From: robelin <robelin@nvidia.com>

The intention to keep the unsed if(0) block is gone now. Remove
them for clean codes.

Signed-off-by: robelin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index 708d9f8682ea..a52b11b05934 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -175,15 +175,6 @@ static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
 		value &= ~WDTCR_PERIOD_MASK;
 		value |= WDTCR_PERIOD(1);
 
-		/* enable local FIQ and remote interrupt for debug dump */
-		if (0)
-			value |= WDTCR_REMOTE_INT_ENABLE |
-				 WDTCR_LOCAL_FIQ_ENABLE;
-
-		/* enable system debug reset (doesn't properly reboot) */
-		if (0)
-			value |= WDTCR_SYSTEM_DEBUG_RESET_ENABLE;
-
 		/* enable system POR reset */
 		value |= WDTCR_SYSTEM_POR_RESET_ENABLE;
 
-- 
2.34.1

[PATCH v4 0/3] clocksource: fix Tegra234 SoC Watchdog Timer.

[Robert Lin]

From: robelin <robelin@nvidia.com>

This set of patches includes a fix for watchdog for it may not bark
due to self-pinging and adds WDIOC_GETTIMELEFT support.

--
V4:
- Improve the precision of timeleft value

V3:
- Improve comment description
- Refactor to fit codeline within 80 columns
- Remove unused if(0) blocks


V2:
- Fix a compilation error, a warning and updates copyright
--

Pohsun Su (2):
  clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support
  clocksource/drivers/timer-tegra186: fix watchdog self-pinging

robelin (1):
  clocksource/drivers/timer-tegra186: Remove unused bits

 drivers/clocksource/timer-tegra186.c | 92 +++++++++++++++++-----------
 1 file changed, 55 insertions(+), 37 deletions(-)

-- 
2.34.1

RE: [PATCH v4 0/3] clocksource: fix Tegra234 SoC Watchdog Timer.

[Robert Lin]

> -----Original Message-----
> From: Robert Lin <robelin@nvidia.com>
> Sent: Thursday, April 17, 2025 5:28 PM
> To: thierry.reding@gmail.com; daniel.lezcano@linaro.org; Jon Hunter
> <jonathanh@nvidia.com>; tglx@linutronix.de; Pohsun Su
> <pohsuns@nvidia.com>
> Cc: linux-kernel@vger.kernel.org; linux-tegra@vger.kernel.org; Sumit Gupta
> <sumitg@nvidia.com>; Robert Lin <robelin@nvidia.com>
> Subject: [PATCH v4 0/3] clocksource: fix Tegra234 SoC Watchdog Timer.
> 
> From: robelin <robelin@nvidia.com>
> 
> This set of patches includes a fix for watchdog for it may not bark due to self-
> pinging and adds WDIOC_GETTIMELEFT support.
> 
> --
> V4:
> - Improve the precision of timeleft value
> 
> V3:
> - Improve comment description
> - Refactor to fit codeline within 80 columns
> - Remove unused if(0) blocks
> 
> 
> V2:
> - Fix a compilation error, a warning and updates copyright
> --
> 
> Pohsun Su (2):
>   clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support
>   clocksource/drivers/timer-tegra186: fix watchdog self-pinging
> 
> robelin (1):
>   clocksource/drivers/timer-tegra186: Remove unused bits
> 
>  drivers/clocksource/timer-tegra186.c | 92 +++++++++++++++++-----------
>  1 file changed, 55 insertions(+), 37 deletions(-)
> 
> --
> 2.34.1

Sorry for the spam. My automation script has some issue to submit the wrong patch series. Please ignore these emails and move on to the next patch v4 series.

All the best,
Robert Lin

[PATCH v4 1/3] clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support

[Robert Lin]

From: Pohsun Su <pohsuns@nvidia.com>

This change adds support for WDIOC_GETTIMELEFT so userspace
programs can get the number of seconds before system reset by
the watchdog timer via ioctl.

Signed-off-by: Pohsun Su <pohsuns@nvidia.com>
Signed-off-by: Robert Lin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 56 +++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index ea742889ee06..201b24ca59f4 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2019-2025 NVIDIA Corporation. All rights reserved.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clocksource.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -30,6 +31,7 @@
 
 #define TMRSR 0x004
 #define  TMRSR_INTR_CLR BIT(30)
+#define  TMRSR_PCV GENMASK(28, 0)
 
 #define TMRCSSR 0x008
 #define  TMRCSSR_SRC_USEC (0 << 0)
@@ -46,6 +48,9 @@
 #define  WDTCR_TIMER_SOURCE_MASK 0xf
 #define  WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
 
+#define WDTSR 0x004
+#define  WDTSR_CURRENT_EXPIRATION_COUNT GENMASK(14, 12)
+
 #define WDTCMDR 0x008
 #define  WDTCMDR_DISABLE_COUNTER BIT(1)
 #define  WDTCMDR_START_COUNTER BIT(0)
@@ -235,12 +240,61 @@ static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static unsigned int tegra186_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+	u32 timeleft, expiration, val;
+
+	if (!watchdog_active(&wdt->base)) {
+		/* return zero if the watchdog timer is not activated. */
+		return 0;
+	}
+
+	/*
+	 * Reset occurs on the fifth expiration of the
+	 * watchdog timer and so when the watchdog timer is configured,
+	 * the actual value programmed into the counter is 1/5 of the
+	 * timeout value. Once the counter reaches 0, expiration count
+	 * will be increased by 1 and the down counter restarts.
+	 * Hence to get the time left before system reset we must
+	 * combine 2 parts:
+	 * 1. value of the current down counter
+	 * 2. (number of counter expirations remaining) * (timeout/5)
+	 */
+
+	/* Get the current number of counter expirations. Should be a
+	 * value between 0 and 4
+	 */
+	val = readl_relaxed(wdt->regs + WDTSR);
+	expiration = FIELD_GET(WDTSR_CURRENT_EXPIRATION_COUNT, val);
+
+	/* Get the current counter value in microsecond.
+	 */
+	val = readl_relaxed(wdt->tmr->regs + TMRSR);
+	timeleft = FIELD_GET(TMRSR_PCV, val);
+
+	/*
+	 * Calculate the time remaining by adding the time for the
+	 * counter value to the time of the counter expirations that
+	 * remain. Do the multiplication first on purpose just to keep
+	 * the precision due to the integer division.
+	 */
+	timeleft += wdt->base.timeout * (4 - expiration) / 5;
+	/*
+	 * Convert the current counter value to seconds,
+	 * rounding up to the nearest second.
+	 */
+	timeleft = (timeleft + USEC_PER_SEC / 2) / USEC_PER_SEC;
+	return timeleft;
+}
+
 static const struct watchdog_ops tegra186_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = tegra186_wdt_start,
 	.stop = tegra186_wdt_stop,
 	.ping = tegra186_wdt_ping,
 	.set_timeout = tegra186_wdt_set_timeout,
+	.get_timeleft = tegra186_wdt_get_timeleft,
 };
 
 static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
-- 
2.34.1

[PATCH v4 2/3] clocksource/drivers/timer-tegra186: fix watchdog self-pinging

[Robert Lin]

From: Pohsun Su <pohsuns@nvidia.com>

This change removes watchdog self-pinging behavior.

The timer irq handler is triggered due to the 1st expiration,
the handler disables and enables watchdog but also implicitly
clears the expiration count so the count can only be 0 or 1.

Since this watchdog supports opened, configured, or pinged by
systemd, We remove this behavior or the watchdog may not bark
when systemd crashes since the 5th expiration never comes.

Signed-off-by: Pohsun Su <pohsuns@nvidia.com>
Signed-off-by: Robert Lin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index 201b24ca59f4..708d9f8682ea 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -175,9 +175,6 @@ static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
 		value &= ~WDTCR_PERIOD_MASK;
 		value |= WDTCR_PERIOD(1);
 
-		/* enable local interrupt for WDT petting */
-		value |= WDTCR_LOCAL_INT_ENABLE;
-
 		/* enable local FIQ and remote interrupt for debug dump */
 		if (0)
 			value |= WDTCR_REMOTE_INT_ENABLE |
@@ -420,23 +417,10 @@ static int tegra186_timer_usec_init(struct tegra186_timer *tegra)
 	return clocksource_register_hz(&tegra->usec, USEC_PER_SEC);
 }
 
-static irqreturn_t tegra186_timer_irq(int irq, void *data)
-{
-	struct tegra186_timer *tegra = data;
-
-	if (watchdog_active(&tegra->wdt->base)) {
-		tegra186_wdt_disable(tegra->wdt);
-		tegra186_wdt_enable(tegra->wdt);
-	}
-
-	return IRQ_HANDLED;
-}
-
 static int tegra186_timer_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct tegra186_timer *tegra;
-	unsigned int irq;
 	int err;
 
 	tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
@@ -455,8 +439,6 @@ static int tegra186_timer_probe(struct platform_device *pdev)
 	if (err < 0)
 		return err;
 
-	irq = err;
-
 	/* create a watchdog using a preconfigured timer */
 	tegra->wdt = tegra186_wdt_create(tegra, 0);
 	if (IS_ERR(tegra->wdt)) {
@@ -483,17 +465,8 @@ static int tegra186_timer_probe(struct platform_device *pdev)
 		goto unregister_osc;
 	}
 
-	err = devm_request_irq(dev, irq, tegra186_timer_irq, 0,
-			       "tegra186-timer", tegra);
-	if (err < 0) {
-		dev_err(dev, "failed to request IRQ#%u: %d\n", irq, err);
-		goto unregister_usec;
-	}
-
 	return 0;
 
-unregister_usec:
-	clocksource_unregister(&tegra->usec);
 unregister_osc:
 	clocksource_unregister(&tegra->osc);
 unregister_tsc:
-- 
2.34.1

[PATCH v4 3/3] clocksource/drivers/timer-tegra186: Remove unused bits

[Robert Lin]

From: robelin <robelin@nvidia.com>

The intention to keep the unsed if(0) block is gone now. Remove
them for clean codes.

Signed-off-by: robelin <robelin@nvidia.com>
---
 drivers/clocksource/timer-tegra186.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
index 708d9f8682ea..a52b11b05934 100644
--- a/drivers/clocksource/timer-tegra186.c
+++ b/drivers/clocksource/timer-tegra186.c
@@ -175,15 +175,6 @@ static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
 		value &= ~WDTCR_PERIOD_MASK;
 		value |= WDTCR_PERIOD(1);
 
-		/* enable local FIQ and remote interrupt for debug dump */
-		if (0)
-			value |= WDTCR_REMOTE_INT_ENABLE |
-				 WDTCR_LOCAL_FIQ_ENABLE;
-
-		/* enable system debug reset (doesn't properly reboot) */
-		if (0)
-			value |= WDTCR_SYSTEM_DEBUG_RESET_ENABLE;
-
 		/* enable system POR reset */
 		value |= WDTCR_SYSTEM_POR_RESET_ENABLE;
 
-- 
2.34.1

RE: [PATCH 1/3] clocksource/drivers/timer-tegra186: add WDIOC_GETTIMELEFT support

[Robert Lin]

> -----Original Message-----
> From: Robert Lin <robelin@nvidia.com>
> Sent: Thursday, April 17, 2025 5:28 PM
> To: thierry.reding@gmail.com; daniel.lezcano@linaro.org; Jon Hunter
> <jonathanh@nvidia.com>; tglx@linutronix.de; Pohsun Su
> <pohsuns@nvidia.com>
> Cc: linux-kernel@vger.kernel.org; linux-tegra@vger.kernel.org; Sumit Gupta
> <sumitg@nvidia.com>; Robert Lin <robelin@nvidia.com>
> Subject: [PATCH 1/3] clocksource/drivers/timer-tegra186: add
> WDIOC_GETTIMELEFT support
> 
> From: Pohsun Su <pohsuns@nvidia.com>
> 
> This change adds support for WDIOC_GETTIMELEFT so userspace programs
> can get the number of seconds before system reset by the watchdog timer via
> ioctl.
> 
> Signed-off-by: Pohsun Su <pohsuns@nvidia.com>
> Signed-off-by: Robert Lin <robelin@nvidia.com>
> ---
>  drivers/clocksource/timer-tegra186.c | 56
> +++++++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-
> tegra186.c
> index ea742889ee06..201b24ca59f4 100644
> --- a/drivers/clocksource/timer-tegra186.c
> +++ b/drivers/clocksource/timer-tegra186.c
> @@ -1,8 +1,9 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
> + * Copyright (c) 2019-2025 NVIDIA Corporation. All rights reserved.
>   */
> 
> +#include <linux/bitfield.h>
>  #include <linux/clocksource.h>
>  #include <linux/module.h>
>  #include <linux/interrupt.h>
> @@ -30,6 +31,7 @@
> 
>  #define TMRSR 0x004
>  #define  TMRSR_INTR_CLR BIT(30)
> +#define  TMRSR_PCV GENMASK(28, 0)
> 
>  #define TMRCSSR 0x008
>  #define  TMRCSSR_SRC_USEC (0 << 0)
> @@ -46,6 +48,9 @@
>  #define  WDTCR_TIMER_SOURCE_MASK 0xf
>  #define  WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
> 
> +#define WDTSR 0x004
> +#define  WDTSR_CURRENT_EXPIRATION_COUNT GENMASK(14, 12)
> +
>  #define WDTCMDR 0x008
>  #define  WDTCMDR_DISABLE_COUNTER BIT(1)  #define
> WDTCMDR_START_COUNTER BIT(0) @@ -235,12 +240,61 @@ static int
> tegra186_wdt_set_timeout(struct watchdog_device *wdd,
>  	return 0;
>  }
> 
> +static unsigned int tegra186_wdt_get_timeleft(struct watchdog_device
> +*wdd) {
> +	struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
> +	u32 timeleft, expiration, val;
> +
> +	if (!watchdog_active(&wdt->base)) {
> +		/* return zero if the watchdog timer is not activated. */
> +		return 0;
> +	}
> +
> +	/*
> +	 * Reset occurs on the fifth expiration of the
> +	 * watchdog timer and so when the watchdog timer is configured,
> +	 * the actual value programmed into the counter is 1/5 of the
> +	 * timeout value. Once the counter reaches 0, expiration count
> +	 * will be increased by 1 and the down counter restarts.
> +	 * Hence to get the time left before system reset we must
> +	 * combine 2 parts:
> +	 * 1. value of the current down counter
> +	 * 2. (number of counter expirations remaining) * (timeout/5)
> +	 */
> +
> +	/* Get the current number of counter expirations. Should be a
> +	 * value between 0 and 4
> +	 */
> +	val = readl_relaxed(wdt->regs + WDTSR);
> +	expiration = FIELD_GET(WDTSR_CURRENT_EXPIRATION_COUNT, val);
> +
> +	/* Get the current counter value in microsecond.
> +	 */
> +	val = readl_relaxed(wdt->tmr->regs + TMRSR);
> +	timeleft = FIELD_GET(TMRSR_PCV, val);
> +
> +	/*
> +	 * Calculate the time remaining by adding the time for the
> +	 * counter value to the time of the counter expirations that
> +	 * remain. Do the multiplication first on purpose just to keep
> +	 * the precision due to the integer division.
> +	 */
> +	timeleft += wdt->base.timeout * (4 - expiration) / 5;
> +	/*
> +	 * Convert the current counter value to seconds,
> +	 * rounding up to the nearest second.
> +	 */
> +	timeleft = (timeleft + USEC_PER_SEC / 2) / USEC_PER_SEC;
> +	return timeleft;
> +}
> +
>  static const struct watchdog_ops tegra186_wdt_ops = {
>  	.owner = THIS_MODULE,
>  	.start = tegra186_wdt_start,
>  	.stop = tegra186_wdt_stop,
>  	.ping = tegra186_wdt_ping,
>  	.set_timeout = tegra186_wdt_set_timeout,
> +	.get_timeleft = tegra186_wdt_get_timeleft,
>  };
> 
>  static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer
> *tegra,
> --
> 2.34.1

Sorry for the spam. My automation script has some issue to submit the wrong patch series. Please ignore these emails and move on to the next patch v4 series: https://lore.kernel.org/lkml/20250417093110.2751877-1-robelin@nvidia.com/T/#t

Let me know if this cause trouble and I'll need to submit a V5 patch instead, I apology for the mess.

All the best,
Robert Lin