Linux Tegra architecture development
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Thierry Reding <treding@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Dmitry Osipenko <digetx@gmail.com>
Cc: linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] usb: phy: tegra: use phy type directly
Date: Thu, 22 Jan 2026 17:11:24 +0200	[thread overview]
Message-ID: <20260122151125.7367-2-clamor95@gmail.com> (raw)
In-Reply-To: <20260122151125.7367-1-clamor95@gmail.com>

Refactor to directly use enum usb_phy_interface to determine the PHY mode.
This change is in preparation for adding support for HSIC mode.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/usb/phy/phy-tegra-usb.c   | 51 +++++++++++++++++++------------
 include/linux/usb/tegra_usb_phy.h |  2 +-
 2 files changed, 33 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 1f527fcb42f6..afa5b5535f92 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -814,15 +814,24 @@ static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
 
 static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
 {
-	int err;
+	int err = 0;
 
 	if (phy->powered_on)
 		return 0;
 
-	if (phy->is_ulpi_phy)
-		err = ulpi_phy_power_on(phy);
-	else
+	switch (phy->phy_type) {
+	case USBPHY_INTERFACE_MODE_UTMI:
 		err = utmi_phy_power_on(phy);
+		break;
+
+	case USBPHY_INTERFACE_MODE_ULPI:
+		err = ulpi_phy_power_on(phy);
+		break;
+
+	default:
+		break;
+	}
+
 	if (err)
 		return err;
 
@@ -836,15 +845,24 @@ static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
 
 static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
 {
-	int err;
+	int err = 0;
 
 	if (!phy->powered_on)
 		return 0;
 
-	if (phy->is_ulpi_phy)
-		err = ulpi_phy_power_off(phy);
-	else
+	switch (phy->phy_type) {
+	case USBPHY_INTERFACE_MODE_UTMI:
 		err = utmi_phy_power_off(phy);
+		break;
+
+	case USBPHY_INTERFACE_MODE_ULPI:
+		err = ulpi_phy_power_off(phy);
+		break;
+
+	default:
+		break;
+	}
+
 	if (err)
 		return err;
 
@@ -863,7 +881,7 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
 	usb_phy_set_wakeup(u_phy, false);
 	tegra_usb_phy_power_off(phy);
 
-	if (!phy->is_ulpi_phy)
+	if (phy->phy_type == USBPHY_INTERFACE_MODE_UTMI)
 		utmip_pad_close(phy);
 
 	regulator_disable(phy->vbus);
@@ -1049,7 +1067,7 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
 		goto disable_clk;
 	}
 
-	if (!phy->is_ulpi_phy) {
+	if (phy->phy_type == USBPHY_INTERFACE_MODE_UTMI) {
 		err = utmip_pad_open(phy);
 		if (err)
 			goto disable_vbus;
@@ -1066,7 +1084,7 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
 	return 0;
 
 close_phy:
-	if (!phy->is_ulpi_phy)
+	if (phy->phy_type == USBPHY_INTERFACE_MODE_UTMI)
 		utmip_pad_close(phy);
 
 disable_vbus:
@@ -1104,8 +1122,6 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
 	struct resource *res;
 	int err;
 
-	tegra_phy->is_ulpi_phy = false;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res) {
 		dev_err(&pdev->dev, "Failed to get UTMI pad regs\n");
@@ -1280,7 +1296,6 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct tegra_usb_phy *tegra_phy;
-	enum usb_phy_interface phy_type;
 	struct reset_control *reset;
 	struct gpio_desc *gpiod;
 	struct resource *res;
@@ -1342,8 +1357,8 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	phy_type = of_usb_get_phy_mode(np);
-	switch (phy_type) {
+	tegra_phy->phy_type = of_usb_get_phy_mode(np);
+	switch (tegra_phy->phy_type) {
 	case USBPHY_INTERFACE_MODE_UTMI:
 		err = utmi_phy_probe(tegra_phy, pdev);
 		if (err)
@@ -1369,8 +1384,6 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		break;
 
 	case USBPHY_INTERFACE_MODE_ULPI:
-		tegra_phy->is_ulpi_phy = true;
-
 		tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
 		err = PTR_ERR_OR_ZERO(tegra_phy->clk);
 		if (err) {
@@ -1410,7 +1423,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n",
-			phy_type);
+			tegra_phy->phy_type);
 		return -EINVAL;
 	}
 
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index c314fad5e375..e394f4880b7e 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -73,7 +73,7 @@ struct tegra_usb_phy {
 	struct usb_phy *ulpi;
 	struct usb_phy u_phy;
 	bool is_legacy_phy;
-	bool is_ulpi_phy;
+	enum usb_phy_interface phy_type;
 	struct gpio_desc *reset_gpio;
 	struct reset_control *pad_rst;
 	bool wakeup_enabled;
-- 
2.51.0


  reply	other threads:[~2026-01-22 15:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-22 15:11 [PATCH v3 0/2] usb: phy: tegra: add support for HSIC mode Svyatoslav Ryhel
2026-01-22 15:11 ` Svyatoslav Ryhel [this message]
2026-02-02  3:16   ` [PATCH v3 1/2] usb: phy: tegra: use phy type directly Mikko Perttunen
2026-01-22 15:11 ` [PATCH v3 2/2] usb: phy: tegra: add HSIC support Svyatoslav Ryhel
2026-02-02  4:07   ` Mikko Perttunen
2026-02-02  6:37     ` Svyatoslav Ryhel
2026-02-02  8:06       ` Mikko Perttunen
2026-02-02  8:24         ` Svyatoslav Ryhel
2026-02-03  4:32           ` Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260122151125.7367-2-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=digetx@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox