From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 1/4] clk: tegra: Add la clock for Tegra210
Date: Wed, 24 Jan 2018 10:03:31 +0000 [thread overview]
Message-ID: <31118e4b-80bd-1db2-0a82-9359b99deccf@nvidia.com> (raw)
In-Reply-To: <1516699369-3513-2-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
On 23/01/18 09:22, Peter De Schrijver wrote:
> This clock is needed by the memory built-in self test work around.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/clk/tegra/clk-tegra210.c | 14 ++++++++++++++
> include/dt-bindings/clock/tegra210-car.h | 2 +-
> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index 9e62608..f790c2d 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -41,6 +41,7 @@
> #define CLK_SOURCE_CSITE 0x1d4
> #define CLK_SOURCE_EMC 0x19c
> #define CLK_SOURCE_SOR1 0x410
> +#define CLK_SOURCE_LA 0x1f8
>
> #define PLLC_BASE 0x80
> #define PLLC_OUT 0x84
> @@ -2654,6 +2655,13 @@ static int tegra210_init_pllu(void)
> sor1_parents_idx, 0, &sor1_lock),
> };
>
> +static const char * const la_parents[] = {
> + "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_re_out1", "pll_a1", "clk_m", "pll_c4_out0"
> +};
> +
I was comparing this with downstream and it appears that the parents are
listed as "pll_p", "pll_c", "pll_m", "clk_m". Can you double check the
above is correct?
Otherwise ...
> +static struct tegra_clk_periph tegra210_la =
> + TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, 0);
> +
> static __init void tegra210_periph_clk_init(void __iomem *clk_base,
> void __iomem *pmc_base)
> {
> @@ -2700,6 +2708,12 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
> periph_clk_enb_refcnt);
> clks[TEGRA210_CLK_DSIB] = clk;
>
> + /* la */
> + clk = tegra_clk_register_periph("la", la_parents,
> + ARRAY_SIZE(la_parents), &tegra210_la, clk_base,
> + CLK_SOURCE_LA, 0);
> + clks[TEGRA210_CLK_LA] = clk;
> +
> /* emc mux */
> clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
> ARRAY_SIZE(mux_pllmcp_clkm), 0,
> diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
> index 6422314..6b77e72 100644
> --- a/include/dt-bindings/clock/tegra210-car.h
> +++ b/include/dt-bindings/clock/tegra210-car.h
> @@ -95,7 +95,7 @@
> #define TEGRA210_CLK_CSITE 73
> /* 74 */
> /* 75 */
> -/* 76 */
> +#define TEGRA210_CLK_LA 76
> /* 77 */
> #define TEGRA210_CLK_SOC_THERM 78
> #define TEGRA210_CLK_DTV 79
Acked-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cheers
Jon
--
nvpublic
next prev parent reply other threads:[~2018-01-24 10:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-23 9:22 [PATCH v3 0/4] MBIST work around (WAR) for Tegra210 Peter De Schrijver
2018-01-23 9:22 ` [PATCH v3 1/4] clk: tegra: Add la clock " Peter De Schrijver
[not found] ` <1516699369-3513-2-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-24 10:03 ` Jon Hunter [this message]
[not found] ` <31118e4b-80bd-1db2-0a82-9359b99deccf-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-24 11:23 ` Peter De Schrijver
2018-01-23 9:22 ` [PATCH v3 2/4] clk: tegra: add fence_delay for clock registers Peter De Schrijver
2018-01-24 10:20 ` Jon Hunter
2018-01-23 9:22 ` [PATCH v3 3/4] clk: tegra: MBIST work around for Tegra210 Peter De Schrijver
2018-01-24 21:59 ` Jon Hunter
[not found] ` <637b3bb4-1ac0-5612-ec2e-5740e611b11a-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-25 9:02 ` Peter De Schrijver
[not found] ` <20180125090255.GK7031-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2018-01-25 10:19 ` Jon Hunter
[not found] ` <a161a11c-1794-ebc4-3ff0-7624c23cabdb-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-25 12:41 ` Peter De Schrijver
[not found] ` <20180125124157.GN7031-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2018-01-25 13:04 ` Jon Hunter
2018-01-23 9:22 ` [PATCH v3 4/4] soc/tegra: pmc: apply MBIST work around fo Tegra210 Peter De Schrijver
2018-01-24 22:43 ` Jon Hunter
[not found] ` <cf919367-4521-25b1-1f80-16e2b660045e-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-25 10:06 ` Peter De Schrijver
2018-01-25 10:57 ` Jon Hunter
[not found] ` <fe422430-cb85-c28d-404b-98e7b87c15e0-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-01-25 12:26 ` Peter De Schrijver
[not found] ` <20180125122613.GM7031-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2018-01-25 13:07 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=31118e4b-80bd-1db2-0a82-9359b99deccf@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox