* [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
[not found] ` <20220224095558.30929-1-jslaby@suse.cz>
@ 2022-02-24 9:55 ` Jiri Slaby
2022-02-24 16:38 ` Thierry Reding
0 siblings, 1 reply; 2+ messages in thread
From: Jiri Slaby @ 2022-02-24 9:55 UTC (permalink / raw)
To: gregkh
Cc: linux-serial, linux-kernel, Jiri Slaby, Laxman Dewangan,
Thierry Reding, Jonathan Hunter, linux-tegra
Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
---
drivers/tty/serial/8250/8250_omap.c | 16 +---------------
drivers/tty/serial/8250/8250_port.c | 16 +---------------
drivers/tty/serial/jsm/jsm_cls.c | 16 +---------------
drivers/tty/serial/jsm/jsm_neo.c | 16 +---------------
drivers/tty/serial/omap-serial.c | 16 +---------------
drivers/tty/serial/pxa.c | 16 +---------------
drivers/tty/serial/serial-tegra.c | 22 ++++------------------
drivers/tty/serial/vr41xx_siu.c | 15 +--------------
8 files changed, 11 insertions(+), 122 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 73e5f1dbd075..ac8bfa042391 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -357,21 +357,7 @@ static void omap_8250_set_termios(struct uart_port *port,
unsigned char cval = 0;
unsigned int baud;
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
+ cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 863f38e036a7..8642f02e4f05 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2590,21 +2590,7 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
{
unsigned char cval;
- switch (c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
+ cval = UART_LCR_WLEN(tty_get_char_size(c_cflag));
if (c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index b507a2cec926..b280da50290c 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -737,21 +737,7 @@ static void cls_param(struct jsm_channel *ch)
if (ch->ch_c_cflag & CSTOPB)
lcr |= UART_LCR_STOP;
- switch (ch->ch_c_cflag & CSIZE) {
- case CS5:
- lcr |= UART_LCR_WLEN5;
- break;
- case CS6:
- lcr |= UART_LCR_WLEN6;
- break;
- case CS7:
- lcr |= UART_LCR_WLEN7;
- break;
- case CS8:
- default:
- lcr |= UART_LCR_WLEN8;
- break;
- }
+ lcr |= UART_LCR_WLEN(tty_get_char_size(ch->ch_c_cflag));
ier = readb(&ch->ch_cls_uart->ier);
uart_lcr = readb(&ch->ch_cls_uart->lcr);
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index c6f927a76c3b..c4fd31de04b4 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -1008,21 +1008,7 @@ static void neo_param(struct jsm_channel *ch)
if (ch->ch_c_cflag & CSTOPB)
lcr |= UART_LCR_STOP;
- switch (ch->ch_c_cflag & CSIZE) {
- case CS5:
- lcr |= UART_LCR_WLEN5;
- break;
- case CS6:
- lcr |= UART_LCR_WLEN6;
- break;
- case CS7:
- lcr |= UART_LCR_WLEN7;
- break;
- case CS8:
- default:
- lcr |= UART_LCR_WLEN8;
- break;
- }
+ lcr |= UART_LCR_WLEN(tty_get_char_size(ch->ch_c_cflag));
ier = readb(&ch->ch_neo_uart->ier);
uart_lcr = readb(&ch->ch_neo_uart->lcr);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7074670cf81d..8d5ffa196097 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -808,21 +808,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long flags;
unsigned int baud, quot;
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
+ cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5d7b7e56661f..e80ba8e10407 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -430,21 +430,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int baud, quot;
unsigned int dll;
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
+ cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index b6223fab0687..d942ab152f5a 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1277,6 +1277,7 @@ static void tegra_uart_set_termios(struct uart_port *u,
unsigned int baud;
unsigned long flags;
unsigned int lcr;
+ unsigned char char_bits;
int symb_bit = 1;
struct clk *parent_clk = clk_get_parent(tup->uart_clk);
unsigned long parent_clk_rate = clk_get_rate(parent_clk);
@@ -1316,25 +1317,10 @@ static void tegra_uart_set_termios(struct uart_port *u,
}
}
+ char_bits = tty_get_char_size(termios->c_cflag);
+ symb_bit += char_bits;
lcr &= ~UART_LCR_WLEN8;
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- lcr |= UART_LCR_WLEN5;
- symb_bit += 5;
- break;
- case CS6:
- lcr |= UART_LCR_WLEN6;
- symb_bit += 6;
- break;
- case CS7:
- lcr |= UART_LCR_WLEN7;
- symb_bit += 7;
- break;
- default:
- lcr |= UART_LCR_WLEN8;
- symb_bit += 8;
- break;
- }
+ lcr |= UART_LCR_WLEN(char_bits);
/* Stop bits */
if (termios->c_cflag & CSTOPB) {
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index 6b303af5ee54..e0bf003ca3a1 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -504,20 +504,7 @@ static void siu_set_termios(struct uart_port *port, struct ktermios *new,
unsigned long flags;
c_cflag = new->c_cflag;
- switch (c_cflag & CSIZE) {
- case CS5:
- lcr = UART_LCR_WLEN5;
- break;
- case CS6:
- lcr = UART_LCR_WLEN6;
- break;
- case CS7:
- lcr = UART_LCR_WLEN7;
- break;
- default:
- lcr = UART_LCR_WLEN8;
- break;
- }
+ lcr = UART_LCR_WLEN(tty_get_char_size(c_cflag));
if (c_cflag & CSTOPB)
lcr |= UART_LCR_STOP;
--
2.35.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
2022-02-24 9:55 ` [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size() Jiri Slaby
@ 2022-02-24 16:38 ` Thierry Reding
0 siblings, 0 replies; 2+ messages in thread
From: Thierry Reding @ 2022-02-24 16:38 UTC (permalink / raw)
To: Jiri Slaby
Cc: gregkh, linux-serial, linux-kernel, Laxman Dewangan,
Jonathan Hunter, linux-tegra
[-- Attachment #1: Type: text/plain, Size: 1171 bytes --]
On Thu, Feb 24, 2022 at 10:55:55AM +0100, Jiri Slaby wrote:
> Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
> helper, we can remove all those repeated switch-cases in drivers.
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Laxman Dewangan <ldewangan@nvidia.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: linux-tegra@vger.kernel.org
> ---
> drivers/tty/serial/8250/8250_omap.c | 16 +---------------
> drivers/tty/serial/8250/8250_port.c | 16 +---------------
> drivers/tty/serial/jsm/jsm_cls.c | 16 +---------------
> drivers/tty/serial/jsm/jsm_neo.c | 16 +---------------
> drivers/tty/serial/omap-serial.c | 16 +---------------
> drivers/tty/serial/pxa.c | 16 +---------------
> drivers/tty/serial/serial-tegra.c | 22 ++++------------------
> drivers/tty/serial/vr41xx_siu.c | 15 +--------------
> 8 files changed, 11 insertions(+), 122 deletions(-)
This would've been easier to review if I had this in my inbox, but I did
find it on lkml.org and this does look correct, so:
Reviewed-by: Thierry Reding <treding@nvidia.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-02-24 16:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220224095517.30872-1-jslaby@suse.cz>
[not found] ` <20220224095558.30929-1-jslaby@suse.cz>
2022-02-24 9:55 ` [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size() Jiri Slaby
2022-02-24 16:38 ` Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox