From: Jon Hunter <jonathanh@nvidia.com>
To: Akhil R <akhilrajeev@nvidia.com>,
ldewangan@nvidia.com, vkoul@kernel.org, thierry.reding@gmail.com,
p.zabel@pengutronix.de, dmaengine@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/3] dmaengine: tegra: Add support for dma-channel-mask
Date: Fri, 23 Sep 2022 11:50:51 +0100 [thread overview]
Message-ID: <b56bb804-4d1b-0db0-ff39-96728015f580@nvidia.com> (raw)
In-Reply-To: <20220919112559.58195-4-akhilrajeev@nvidia.com>
On 19/09/2022 12:25, Akhil R wrote:
> Add support for dma-channel-mask so that only the specified channels
> are used. This helps to reserve some channels for the firmware.
>
> This was initially achieved by limiting the channel number to 31 in
> the driver and adjusting the register address to skip channel0 which
> was reserved for a firmware. Now, with this change, the driver can
> align more to the actual hardware which has 32 channels.
>
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> ---
> drivers/dma/tegra186-gpc-dma.c | 37 +++++++++++++++++++++++++++-------
> 1 file changed, 30 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/dma/tegra186-gpc-dma.c b/drivers/dma/tegra186-gpc-dma.c
> index fa9bda4a2bc6..1d1180db6d4e 100644
> --- a/drivers/dma/tegra186-gpc-dma.c
> +++ b/drivers/dma/tegra186-gpc-dma.c
> @@ -161,7 +161,10 @@
> #define TEGRA_GPCDMA_BURST_COMPLETION_TIMEOUT 5000 /* 5 msec */
>
> /* Channel base address offset from GPCDMA base address */
> -#define TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET 0x20000
> +#define TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET 0x10000
> +
> +/* Default channel mask reserving channel0 */
> +#define TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK 0xfffffffe
>
> struct tegra_dma;
> struct tegra_dma_channel;
> @@ -246,6 +249,7 @@ struct tegra_dma {
> const struct tegra_dma_chip_data *chip_data;
> unsigned long sid_m2d_reserved;
> unsigned long sid_d2m_reserved;
> + u32 chan_mask;
> void __iomem *base_addr;
> struct device *dev;
> struct dma_device dma_dev;
> @@ -1288,7 +1292,7 @@ static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
> }
>
> static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
> - .nr_channels = 31,
> + .nr_channels = 32,
> .channel_reg_size = SZ_64K,
> .max_dma_count = SZ_1G,
> .hw_support_pause = false,
> @@ -1296,7 +1300,7 @@ static const struct tegra_dma_chip_data tegra186_dma_chip_data = {
> };
>
> static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
> - .nr_channels = 31,
> + .nr_channels = 32,
> .channel_reg_size = SZ_64K,
> .max_dma_count = SZ_1G,
> .hw_support_pause = true,
> @@ -1304,7 +1308,7 @@ static const struct tegra_dma_chip_data tegra194_dma_chip_data = {
> };
>
> static const struct tegra_dma_chip_data tegra234_dma_chip_data = {
> - .nr_channels = 31,
> + .nr_channels = 32,
> .channel_reg_size = SZ_64K,
> .max_dma_count = SZ_1G,
> .hw_support_pause = true,
> @@ -1380,15 +1384,28 @@ static int tegra_dma_probe(struct platform_device *pdev)
> }
> stream_id = iommu_spec->ids[0] & 0xffff;
>
> + ret = device_property_read_u32(&pdev->dev, "dma-channel-mask",
> + &tdma->chan_mask);
> + if (ret) {
> + dev_warn(&pdev->dev,
> + "Missing dma-channel-mask property, using default channel mask %#x\n",
> + TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK);
> + tdma->chan_mask = TEGRA_GPCDMA_DEFAULT_CHANNEL_MASK;
> + }
> +
> INIT_LIST_HEAD(&tdma->dma_dev.channels);
> for (i = 0; i < cdata->nr_channels; i++) {
> struct tegra_dma_channel *tdc = &tdma->channels[i];
>
> + /* Check for channel mask */
> + if (!(tdma->chan_mask & BIT(i)))
> + continue;
> +
> tdc->irq = platform_get_irq(pdev, i);
> if (tdc->irq < 0)
> return tdc->irq;
>
> - tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET +
> + tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADDR_OFFSET +
> i * cdata->channel_reg_size;
> snprintf(tdc->name, sizeof(tdc->name), "gpcdma.%d", i);
> tdc->tdma = tdma;
> @@ -1449,8 +1466,8 @@ static int tegra_dma_probe(struct platform_device *pdev)
> return ret;
> }
>
> - dev_info(&pdev->dev, "GPC DMA driver register %d channels\n",
> - cdata->nr_channels);
> + dev_info(&pdev->dev, "GPC DMA driver register %lu channels\n",
> + hweight_long(tdma->chan_mask));
>
> return 0;
> }
> @@ -1473,6 +1490,9 @@ static int __maybe_unused tegra_dma_pm_suspend(struct device *dev)
> for (i = 0; i < tdma->chip_data->nr_channels; i++) {
> struct tegra_dma_channel *tdc = &tdma->channels[i];
>
> + if (!(tdma->chan_mask & BIT(i)))
> + continue;
> +
> if (tdc->dma_desc) {
> dev_err(tdma->dev, "channel %u busy\n", i);
> return -EBUSY;
> @@ -1492,6 +1512,9 @@ static int __maybe_unused tegra_dma_pm_resume(struct device *dev)
> for (i = 0; i < tdma->chip_data->nr_channels; i++) {
> struct tegra_dma_channel *tdc = &tdma->channels[i];
>
> + if (!(tdma->chan_mask & BIT(i)))
> + continue;
> +
> tegra_dma_program_sid(tdc, tdc->stream_id);
> }
>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Thanks!
Jon
--
nvpublic
prev parent reply other threads:[~2022-09-23 10:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 11:25 [PATCH v2 0/3] Tegra GCPDMA: Add dma-channel-mask support Akhil R
2022-09-19 11:25 ` [PATCH v2 1/3] dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA Akhil R
2022-09-23 10:06 ` Jon Hunter
2022-09-19 11:25 ` [PATCH v2 2/3] arm64: tegra: Add dma-channel-mask in GPCDMA node Akhil R
2022-09-23 10:06 ` Jon Hunter
2022-09-19 11:25 ` [PATCH v2 3/3] dmaengine: tegra: Add support for dma-channel-mask Akhil R
2022-09-23 10:08 ` Jon Hunter
2022-09-23 10:17 ` Akhil R
2022-09-23 10:50 ` Jon Hunter
2022-09-23 11:09 ` Akhil R
2022-09-23 11:45 ` Jon Hunter
2022-09-23 16:22 ` Akhil R
2022-09-23 10:50 ` Jon Hunter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b56bb804-4d1b-0db0-ff39-96728015f580@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=akhilrajeev@nvidia.com \
--cc=dmaengine@vger.kernel.org \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=thierry.reding@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox