Re: [PATCH] scsi: trace: change the rtn log in hex format

[Steven Rostedt <rostedt@goodmis.org>]

On Fri, 9 May 2025 13:38:40 +0800
Kassey Li <quic_yingangl@quicinc.com> wrote:

> In default it showed rtn in decimal.
> 
> kworker/3:1H-183 [003] ....  51.035474: scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=4 data_sgl=1  prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(READ_10 lba=3907214  txlen=1 protect=0 raw=28 00 00 3b 9e 8e 00 00 01 00) rtn=4181
> 
> In source code we define these possible value as hexadecimal:
> 
> include/scsi/scsi.h
> 
> SCSI_MLQUEUE_HOST_BUSY   0x1055
> SCSI_MLQUEUE_DEVICE_BUSY 0x1056
> SCSI_MLQUEUE_EH_RETRY    0x1057
> SCSI_MLQUEUE_TARGET_BUSY 0x1058

Hmm, would you want to make this show text?

> 
> This change converts the rtn in hexadecimal.
> 
> Signed-off-by: Kassey Li <quic_yingangl@quicinc.com>
> ---
>  include/trace/events/scsi.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h
> index bf6cc98d9122..a4c089ac834c 100644
> --- a/include/trace/events/scsi.h
> +++ b/include/trace/events/scsi.h
> @@ -240,7 +240,7 @@ TRACE_EVENT(scsi_dispatch_cmd_error,
>  
>  	TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \
>  		  " prot_op=%s driver_tag=%d scheduler_tag=%d cmnd=(%s %s raw=%s)" \
> -		  " rtn=%d",
> +		  " rtn=0x%x",

		  " rtn=%s",

>  		  __entry->host_no, __entry->channel, __entry->id,
>  		  __entry->lun, __entry->data_sglen, __entry->prot_sglen,
>  		  show_prot_op_name(__entry->prot_op), __entry->driver_tag,

		__print_symbolic(rtn, { SCSI_MLQUEUE_HOST_BUSY, "HOST_BUSY" },
				      { SCSI_MLQUEUE_DEVICE_BUSY, "DEVICE_BUSY" },
				      { SCSI_MLQUEUE_EH_RETRY, "EH_RETRY" },
				      { SCSI_MLQUEUE_TARGET_BUSY, "TARGET_BUSY" })

?

-- Steve