From: sashiko-bot@kernel.org
To: "Vincent Donnefort" <vdonnefort@google.com>
Cc: linux-trace-kernel@vger.kernel.org
Subject: Re: [PATCH v5 04/10] ring-buffer: Fix subbuf resize race with ring buffer readers
Date: Thu, 13 Aug 2026 13:51:42 +0000 [thread overview]
Message-ID: <20260813135142.C27031F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260813131152.3589632-5-vdonnefort@google.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
New issues:
- [High] `ring_buffer_read_start()` introduces a Use-After-Free vulnerability for callers using `GFP_ATOMIC`.
Pre-existing issues:
- [High] Race condition and Out-of-Bounds write in `ring_buffer_map_get_reader()` due to evaluating the global `buffer->subbuf_order`.
--
--- Patch [4]: [PATCH v5 04/10] ring-buffer: Fix subbuf resize race with ring buffer readers ---
commit 71a276d1d136c0fb8371689f58251aa6fc99f54c
Author: Vincent Donnefort <vdonnefort@google.com>
ring-buffer: Fix subbuf resize race with ring buffer readers
This commit replaces the lockless read of trace_buffer::subbuf_size with
bpage::order in ring_buffer_read_start() and ring_buffer_read_page() to
prevent races during resizing. It also removes subbuf_size entirely and
introduces new capacity accessors.
> diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
> index b6fa258aafe2c..ec520c72124e5 100644
> --- a/kernel/trace/ring_buffer.c
> +++ b/kernel/trace/ring_buffer.c
[ ... ]
> @@ -6380,36 +6417,44 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
> struct ring_buffer_iter *
> ring_buffer_read_start(struct trace_buffer *buffer, int cpu, gfp_t flags)
> {
[ ... ]
> + /*
> + * Only KDB is using GFP_ATOMIC, for the others, lock the buffer to
> + * prevent concurrent resizing.
> + */
> + if (gfpflags_allow_blocking(flags))
> + mutex_lock(&buffer->mutex);
>
> atomic_inc(&cpu_buffer->resize_disabled);
>
> + if (gfpflags_allow_blocking(flags))
> + mutex_unlock(&buffer->mutex);
> +
> + /* Holds the entire event: data and meta data. */
> + iter->event_size = rb_page_capacity(READ_ONCE(cpu_buffer->reader_page));
[Severity: High]
Can this cause a use-after-free when called with GFP_ATOMIC?
If this is called with GFP_ATOMIC, it skips taking buffer->mutex and
increments resize_disabled without synchronization. If a concurrent
ring_buffer_subbuf_order_set() evaluated resize_disabled to 0 just before
this increment, it can proceed to replace and free the reader_page.
The lockless dereference of bpage->order inside rb_page_capacity() on the
freed reader_page would then access freed memory. Prior to this patch, it
read the scalar buffer->subbuf_size which was safe from this use-after-free.
[ ... ]
> @@ -7340,18 +7383,21 @@ int ring_buffer_subbuf_order_set(struct trace_buffer *buffer, int order)
[ ... ]
> /* prevent another thread from changing buffer sizes */
> guard(mutex)(&buffer->mutex);
> +
> + old_order = buffer->subbuf_order;
> + if (old_order == order)
> + return 0;
> +
> + old_capacity = rb_subbuf_capacity(buffer);
> +
> atomic_inc(&buffer->record_disabled);
>
> /* Make sure all commits have finished */
> synchronize_rcu();
>
> buffer->subbuf_order = order;
[ ... ]
> @@ -7896,7 +7941,7 @@ int ring_buffer_map_get_reader(struct trace_buffer *buffer, int cpu)
> * missed events, then record it there.
> */
> commit = rb_page_size(reader);
> - if (buffer->subbuf_size - commit >= sizeof(missed_events)) {
> + if (rb_subbuf_capacity(buffer) - commit >= sizeof(missed_events)) {
[Severity: High]
This is a pre-existing issue, but can this lead to an out-of-bounds write?
Since ring_buffer_map_get_reader() does not hold buffer->mutex, it can run
concurrently with ring_buffer_subbuf_order_set(). As shown in the hunk above,
ring_buffer_subbuf_order_set() updates the global buffer->subbuf_order before
checking if resize_disabled is set on the CPU buffers.
If ring_buffer_map_get_reader() reads this temporarily inflated global
capacity while processing an older, smaller reader_page, the capacity check
could incorrectly pass. This would allow the following memcpy() to write
missed_events out of bounds.
Should this use rb_page_capacity(reader) instead of the global
rb_subbuf_capacity(buffer), similar to the fix applied to
ring_buffer_read_page()?
> memcpy(&dpage->data[commit], &missed_events,
> sizeof(missed_events));
> local_add(RB_MISSED_STORED, &dpage->commit);
[ ... ]
> @@ -7928,7 +7973,7 @@ int ring_buffer_map_get_reader(struct trace_buffer *buffer, int cpu)
> out:
> /* Some archs do not have data cache coherency between kernel and user-space */
> flush_kernel_vmap_range(cpu_buffer->reader_page->page,
> - buffer->subbuf_size + BUF_PAGE_HDR_SIZE);
> + rb_subbuf_size(buffer));
[Severity: High]
This isn't a bug introduced by this patch, but could this flush more memory
than is actually mapped?
Similar to the check above, if this reads a temporarily inflated global
capacity while flushing an older, smaller reader_page, the flush range
might exceed the actual allocated page bounds.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260813131152.3589632-1-vdonnefort@google.com?part=4
next prev parent reply other threads:[~2026-08-13 13:51 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 13:11 [PATCH v5 00/10] ring-buffer: Fixes for subbuf resizing and persistent buffers Vincent Donnefort
2026-08-13 13:11 ` [PATCH v5 01/10] ring-buffer: Free cpu_buffer::free_page with subbuf_order Vincent Donnefort
2026-08-13 13:54 ` sashiko-bot
2026-08-13 15:49 ` Masami Hiramatsu
2026-08-13 16:02 ` Vincent Donnefort
2026-08-13 16:03 ` Vincent Donnefort
2026-08-13 16:18 ` Masami Hiramatsu
2026-08-13 13:11 ` [PATCH v5 02/10] ring-buffer: Hold cpu_buffer::lock when resizing a subbuf Vincent Donnefort
2026-08-13 14:01 ` sashiko-bot
2026-08-13 13:11 ` [PATCH v5 03/10] ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page Vincent Donnefort
2026-08-13 13:56 ` sashiko-bot
2026-08-13 13:11 ` [PATCH v5 04/10] ring-buffer: Fix subbuf resize race with ring buffer readers Vincent Donnefort
2026-08-13 13:51 ` sashiko-bot [this message]
2026-08-13 13:11 ` [PATCH v5 05/10] ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page() Vincent Donnefort
2026-08-13 13:11 ` [PATCH v5 06/10] tracing: Fix subbuf resize races with trace_pipe_raw readers Vincent Donnefort
2026-08-13 13:53 ` sashiko-bot
2026-08-13 13:11 ` [PATCH v5 07/10] ring-buffer: Dynamically calculate max_data_size Vincent Donnefort
2026-08-13 13:11 ` [PATCH v5 08/10] ring-buffer: Remove trace_buffer::cpus Vincent Donnefort
2026-08-13 13:11 ` [PATCH v5 09/10] ring-buffer: Remove ring_buffer_per_cpu::mapped Vincent Donnefort
2026-08-13 13:11 ` [PATCH v5 10/10] ring-buffer: Make nr_pages unsigned int Vincent Donnefort
2026-08-13 13:55 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813135142.C27031F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=vdonnefort@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).