From: Mike Looijmans <mike.looijmans@topic.nl>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb: dwc3: gadget: Inform system of suspended state
Date: Tue, 4 Jun 2024 07:26:48 +0200 [thread overview]
Message-ID: <0fceefc4-2b3c-41a4-a6ac-d0b6dbacc1f7@topic.nl> (raw)
In-Reply-To: <20240604010256.4dxamwvcjxug6xfb@synopsys.com>
On 04-06-2024 03:03, Thinh Nguyen wrote:
> Hi,
>
> On Mon, Jun 03, 2024, Mike Looijmans wrote:
>> When disconnecting the USB cable on an LS1028 device, nothing happens
>> in userspace, which keeps thinking everything is still up and running.
>> Turns out that the DWC3 controller only sends DWC3_DEVICE_EVENT_SUSPEND
>> in that case, and not a DWC3_DEVICE_EVENT_DISCONNECT as one would
>> expect. As a result, sysfs attribute "state" remains "configured"
>> until something resets it.
>>
>> Forward the "suspended" state to sysfs, so that the "state" at least
>> changes into "suspended" when one removes the cable, and hence also
>> matches the gadget's state when really suspended.
> On disconnection, did you see disconnect interrupt? If so, it should
> transition to USB_STATE_NOATTACHED. This change doesn't seem to directly
> address your issue. Can you provide the driver tracepoints?
The device doesn't issue a disconnect event, I didn't have tracing
enabled in the kernel but added some dev_info() calls to determine what
was going on. Added this to dwc3_process_event_entry():
dev_info(dwc->dev, "event: 0x%x type=0x%x", event->raw, event->type.type);
When disconnecting the cable from the host, I see this:
[ 50.841411] dwc3 3110000.usb: event: 0x6084 type=0x42
[ 50.841457] dwc3 3110000.usb: event: 0x4086 type=0x43
[ 50.841494] dwc3 3110000.usb: event: 0x6084 type=0x42
[ 50.841534] dwc3 3110000.usb: event: 0x4086 type=0x43
[ 50.841571] dwc3 3110000.usb: event: 0x4086 type=0x43
[ 52.650990] dwc3 3110000.usb: event: 0x30601 type=0x0
The "0x4086" and "0x6084" messages are endpoint events that occur all
the time while connected. The last event is the "suspend" one. After
that, total silence.
If you need traces, please point me to a description on how to obtain them.
>
> Thanks,
> Thinh
>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>> ---
>>
>> drivers/usb/dwc3/gadget.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index 4df2661f6675..99e8ea9db600 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -4343,6 +4343,7 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
>> if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
>> dwc->suspended = true;
>> dwc3_suspend_gadget(dwc);
>> + usb_gadget_set_state(dwc->gadget, USB_STATE_SUSPENDED);
>> }
>>
>> dwc->link_state = next;
>> --
>> 2.34.1
>>
>>
>> Met vriendelijke groet / kind regards,
>>
>> Mike Looijmans
--
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@topic.nl
W: www.topic.nl
next prev parent reply other threads:[~2024-06-04 5:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.c5f44c79-75b2-43c1-a791-806fe8b693cd@emailsignatures365.codetwo.com>
2024-06-03 13:13 ` [PATCH] usb: dwc3: gadget: Inform system of suspended state Mike Looijmans
2024-06-04 1:03 ` Thinh Nguyen
2024-06-04 5:26 ` Mike Looijmans [this message]
2024-06-04 6:45 ` Krishna Kurapati PSSNV
2024-06-04 8:25 ` Mike Looijmans
2024-06-04 8:52 ` Krishna Kurapati PSSNV
2024-06-04 23:06 ` Thinh Nguyen
2024-06-05 14:32 ` Mike Looijmans
2024-06-06 0:28 ` Thinh Nguyen
2024-06-06 5:52 ` Mike Looijmans
2024-06-06 15:11 ` Mike Looijmans
2024-06-06 20:21 ` Thinh Nguyen
2024-06-07 6:10 ` Mike Looijmans
2024-06-07 22:57 ` Thinh Nguyen
2024-06-11 4:59 ` Mike Looijmans
2024-06-11 8:02 ` Mike Looijmans
2024-06-13 0:32 ` Thinh Nguyen
2024-06-13 8:51 ` Mike Looijmans
2024-06-17 23:46 ` Thinh Nguyen
2024-06-18 0:26 ` Thinh Nguyen
2024-06-05 14:41 ` Mike Looijmans
2024-06-06 0:29 ` Thinh Nguyen
2026-03-05 9:45 ` Ravineet Singh
2026-03-06 2:06 ` Thinh Nguyen
2026-03-06 12:07 ` Ravineet Singh
2026-03-06 23:05 ` Thinh Nguyen
2026-03-09 9:52 ` Ravineet Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0fceefc4-2b3c-41a4-a6ac-d0b6dbacc1f7@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=Thinh.Nguyen@synopsys.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox