[RFT PATCH] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long

[Mathias Nyman <mathias.nyman@linux.intel.com>]

If host/hub initiated link pm is prevented by a driver flag we still must
ensure that periodic endpoints have longer service intervals than link pm
exit latency before allowing device initiated link pm.

Fix this by continue walking and checking endpoint service interval if
xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED

While at it fix the split line error message

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 447c29bbad48..8892dfbb2af7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4809,10 +4809,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
 		if (intf->dev.driver) {
 			driver = to_usb_driver(intf->dev.driver);
 			if (driver && driver->disable_hub_initiated_lpm) {
-				dev_dbg(&udev->dev, "Hub-initiated %s disabled "
-						"at request of driver %s\n",
-						state_name, driver->name);
-				return xhci_get_timeout_no_hub_lpm(udev, state);
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
 			}
 		}
 
-- 
2.7.4