From: Sanjay R Mehta <Sanju.Mehta@amd.com>
To: <mika.westerberg@linux.intel.com>, <andreas.noever@gmail.com>,
<michael.jamet@intel.com>, <YehezkelShB@gmail.com>
Cc: <Basavaraj.Natikar@amd.com>, <linux-usb@vger.kernel.org>,
Sanjay R Mehta <sanju.mehta@amd.com>
Subject: [PATCH v5] thunderbolt: Add quirk to disable CLx
Date: Tue, 14 Feb 2023 14:01:52 -0600 [thread overview]
Message-ID: <1676404912-7048-1-git-send-email-Sanju.Mehta@amd.com> (raw)
From: Sanjay R Mehta <sanju.mehta@amd.com>
Add QUIRK_NO_CLX to disable the CLx state for hardware which
doesn't supports it.
AMD Yellow Carp and Pink Sardine don't support CLx state,
hence disabling it using QUIRK_NO_CLX.
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
---
drivers/thunderbolt/quirks.c | 19 +++++++++++++++++--
drivers/thunderbolt/tb.h | 11 ++++++++---
2 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c
index b5f2ec7..3fc5474 100644
--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -20,6 +20,11 @@ static void quirk_dp_credit_allocation(struct tb_switch *sw)
}
}
+static void quirk_clx_disable(struct tb_switch *sw)
+{
+ sw->quirks |= QUIRK_NO_CLX;
+}
+
struct tb_quirk {
u16 hw_vendor_id;
u16 hw_device_id;
@@ -37,6 +42,13 @@ static const struct tb_quirk tb_quirks[] = {
* DP buffers.
*/
{ 0x8087, 0x0b26, 0x0000, 0x0000, quirk_dp_credit_allocation },
+ /*
+ * CLx is not supported on AMD USB4 Yellow Carp and Pink Sardine platforms.
+ */
+ { 0x0438, 0x0208, 0x0000, 0x0000, quirk_clx_disable },
+ { 0x0438, 0x0209, 0x0000, 0x0000, quirk_clx_disable },
+ { 0x0438, 0x020a, 0x0000, 0x0000, quirk_clx_disable },
+ { 0x0438, 0x020b, 0x0000, 0x0000, quirk_clx_disable },
};
/**
@@ -47,14 +59,17 @@ static const struct tb_quirk tb_quirks[] = {
*/
void tb_check_quirks(struct tb_switch *sw)
{
+ struct tb_switch *root_sw = sw->tb->root_switch;
int i;
for (i = 0; i < ARRAY_SIZE(tb_quirks); i++) {
const struct tb_quirk *q = &tb_quirks[i];
- if (q->hw_vendor_id && q->hw_vendor_id != sw->config.vendor_id)
+ if (q->hw_vendor_id && (q->hw_vendor_id != sw->config.vendor_id &&
+ q->hw_vendor_id != root_sw->config.vendor_id))
continue;
- if (q->hw_device_id && q->hw_device_id != sw->config.device_id)
+ if (q->hw_device_id && (q->hw_device_id != sw->config.device_id &&
+ q->hw_device_id != root_sw->config.device_id))
continue;
if (q->vendor && q->vendor != sw->vendor)
continue;
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index f978697..206759a 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -23,6 +23,11 @@
#define NVM_MAX_SIZE SZ_512K
#define NVM_DATA_DWORDS 16
+/* Keep link controller awake during update */
+#define QUIRK_FORCE_POWER_LINK_CONTROLLER BIT(0)
+/* Disable CLx if not supported */
+#define QUIRK_NO_CLX BIT(1)
+
/**
* struct tb_nvm - Structure holding NVM information
* @dev: Owner of the NVM
@@ -997,6 +1002,9 @@ static inline bool tb_switch_is_clx_enabled(const struct tb_switch *sw,
*/
static inline bool tb_switch_is_clx_supported(const struct tb_switch *sw)
{
+ if (sw->quirks & QUIRK_NO_CLX)
+ return false;
+
return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw);
}
@@ -1254,9 +1262,6 @@ struct usb4_port *usb4_port_device_add(struct tb_port *port);
void usb4_port_device_remove(struct usb4_port *usb4);
int usb4_port_device_resume(struct usb4_port *usb4);
-/* Keep link controller awake during update */
-#define QUIRK_FORCE_POWER_LINK_CONTROLLER BIT(0)
-
void tb_check_quirks(struct tb_switch *sw);
#ifdef CONFIG_ACPI
--
2.7.4
next reply other threads:[~2023-02-14 20:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-14 20:01 Sanjay R Mehta [this message]
2023-02-15 5:49 ` [PATCH v5] thunderbolt: Add quirk to disable CLx Mika Westerberg
2023-02-15 5:59 ` Basavaraj Natikar
2023-02-15 6:16 ` Mika Westerberg
2023-02-15 6:23 ` Basavaraj Natikar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1676404912-7048-1-git-send-email-Sanju.Mehta@amd.com \
--to=sanju.mehta@amd.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=linux-usb@vger.kernel.org \
--cc=michael.jamet@intel.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox