[v2,08/10] hikey960: Support usb functionality of Hikey960

[v2,08/10] hikey960: Support usb functionality of Hikey960

[Yu Chen]

This driver handles usb hub power on and typeC port event of HiKey960 board:
1)DP&DM switching between usb hub and typeC port base on typeC port
state
2)Control power of usb hub on Hikey960
3)Control vbus of typeC port

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Using gpiod API with the gpios.
* Removing registering usb role switch.
* Registering usb role switch notifier.
v2:
* Fix license declaration.
* Add configuration of  gpio direction.
* Remove some log print.
---
---
 drivers/misc/Kconfig          |   6 ++
 drivers/misc/Makefile         |   1 +
 drivers/misc/hisi_hikey_usb.c | 181 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 188 insertions(+)
 create mode 100644 drivers/misc/hisi_hikey_usb.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f417b06e11c5..8d8b717759e2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -521,6 +521,12 @@ config PVPANIC
 	  a paravirtualized device provided by QEMU; it lets a virtual machine
 	  (guest) communicate panic events to the host.
 
+config HISI_HIKEY_USB
+	tristate "USB functionality of HiSilicon Hikey Platform"
+	depends on OF && GPIOLIB
+	help
+	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e39ccbbc1b3a..dc8892b13a1a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
+obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..70013f8e76f0
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+
+struct hisi_hikey_usb {
+	struct gpio_desc *otg_switch;
+	struct gpio_desc *typec_vbus;
+	struct gpio_desc *hub_vbus;
+	int typec_vbus_enable_val;
+
+	struct usb_role_switch *role_sw;
+	struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int switch_to)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+		int value)
+{
+	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hisi_hikey_role_switch(struct notifier_block *nb,
+			unsigned long state, void *data)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb;
+
+	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
+
+	switch (state) {
+	case USB_ROLE_NONE:
+		usb_typec_power_ctrl(hisi_hikey_usb,
+				!hisi_hikey_usb->typec_vbus_enable_val);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+		break;
+	case USB_ROLE_HOST:
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		usb_typec_power_ctrl(hisi_hikey_usb,
+				hisi_hikey_usb->typec_vbus_enable_val);
+		break;
+	case USB_ROLE_DEVICE:
+		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+		usb_typec_power_ctrl(hisi_hikey_usb,
+				!hisi_hikey_usb->typec_vbus_enable_val);
+		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *root = dev->of_node;
+	struct hisi_hikey_usb *hisi_hikey_usb;
+	int ret;
+
+	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+	if (!hisi_hikey_usb)
+		return -ENOMEM;
+
+	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
+
+	ret = of_property_read_u32(root, "typec-vbus-enable-val",
+				   &hisi_hikey_usb->typec_vbus_enable_val);
+	if (ret)
+		hisi_hikey_usb->typec_vbus_enable_val = 1;
+
+	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+			hisi_hikey_usb->typec_vbus_enable_val ?
+			GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
+	if (!hisi_hikey_usb->typec_vbus)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
+		return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+	gpiod_direction_output(hisi_hikey_usb->typec_vbus,
+			!hisi_hikey_usb->typec_vbus_enable_val);
+
+	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", GPIOD_IN);
+	if (!hisi_hikey_usb->otg_switch)
+		return -ENOENT;
+	else if (IS_ERR(hisi_hikey_usb->otg_switch))
+		return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+	gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB);
+
+	/* hub-vdd33-en is optional */
+	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
+			GPIOD_OUT_LOW);
+	if (IS_ERR(hisi_hikey_usb->hub_vbus))
+		return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+	gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON);
+
+	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
+	if (!hisi_hikey_usb->role_sw)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(hisi_hikey_usb->role_sw))
+		return PTR_ERR(hisi_hikey_usb->role_sw);
+
+	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+	if (ret) {
+		usb_role_switch_put(hisi_hikey_usb->role_sw);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, hisi_hikey_usb);
+
+	return 0;
+}
+
+static int  hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
+			&hisi_hikey_usb->nb);
+
+	usb_role_switch_put(hisi_hikey_usb->role_sw);
+
+	return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+	{.compatible = "hisilicon,gpio_hubv1"},
+	{.compatible = "hisilicon,hikey960_usb"},
+	{}
+};
+
+static struct platform_driver hisi_hikey_usb_driver = {
+	.probe = hisi_hikey_usb_probe,
+	.remove = hisi_hikey_usb_remove,
+	.driver = {
+		.name = DEVICE_DRIVER_NAME,
+		.of_match_table = id_table_hisi_hikey_usb,
+	},
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");

[v2,08/10] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

Hi,
On Mon, 2019-02-18 at 19:23 +0800, Yu Chen wrote:
> This driver handles usb hub power on and typeC port event of HiKey960 board:
> 1)DP&DM switching between usb hub and typeC port base on typeC port
> state
> 2)Control power of usb hub on Hikey960
> 3)Control vbus of typeC port
> 
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> 
> ---
> v1:
> * Using gpiod API with the gpios.
> * Removing registering usb role switch.
> * Registering usb role switch notifier.
> v2:
> * Fix license declaration.
> * Add configuration of  gpio direction.
> * Remove some log print.
> ---
> ---
>  drivers/misc/Kconfig          |   6 ++
>  drivers/misc/Makefile         |   1 +
>  drivers/misc/hisi_hikey_usb.c | 181 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 188 insertions(+)
>  create mode 100644 drivers/misc/hisi_hikey_usb.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f417b06e11c5..8d8b717759e2 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -521,6 +521,12 @@ config PVPANIC
>  	  a paravirtualized device provided by QEMU; it lets a virtual machine
>  	  (guest) communicate panic events to the host.
>  
> +config HISI_HIKEY_USB
> +	tristate "USB functionality of HiSilicon Hikey Platform"
> +	depends on OF && GPIOLIB
> +	help
> +	  If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index e39ccbbc1b3a..dc8892b13a1a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
>  obj-$(CONFIG_OCXL)		+= ocxl/
>  obj-y				+= cardreader/
>  obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
> +obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
> diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
> new file mode 100644
> index 000000000000..70013f8e76f0
> --- /dev/null
> +++ b/drivers/misc/hisi_hikey_usb.c
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for usb functionality of Hikey series boards
> + * based on Hisilicon Kirin Soc.
> + *
> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
> + *		http://www.huawei.com
> + *
> + * Authors: Yu Chen <chenyu56@huawei.com>
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/usb/role.h>
> +
> +#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
> +
> +#define HUB_VBUS_POWER_ON 1
> +#define HUB_VBUS_POWER_OFF 0
> +#define USB_SWITCH_TO_HUB 1
> +#define USB_SWITCH_TO_TYPEC 0
> +
> +struct hisi_hikey_usb {
> +	struct gpio_desc *otg_switch;
> +	struct gpio_desc *typec_vbus;
> +	struct gpio_desc *hub_vbus;
> +	int typec_vbus_enable_val;
> +
> +	struct usb_role_switch *role_sw;
> +	struct notifier_block nb;
> +};
> +
> +static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
> +}
> +
> +static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int switch_to)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
> +}
> +
> +static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
> +		int value)
> +{
> +	gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
> +}
> +
> +static int hisi_hikey_role_switch(struct notifier_block *nb,
> +			unsigned long state, void *data)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +
> +	hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
> +
> +	switch (state) {
> +	case USB_ROLE_NONE:
> +		usb_typec_power_ctrl(hisi_hikey_usb,
> +				!hisi_hikey_usb->typec_vbus_enable_val);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
> +		break;
> +	case USB_ROLE_HOST:
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		usb_typec_power_ctrl(hisi_hikey_usb,
> +				hisi_hikey_usb->typec_vbus_enable_val);
> +		break;
> +	case USB_ROLE_DEVICE:
> +		hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
> +		usb_typec_power_ctrl(hisi_hikey_usb,
> +				!hisi_hikey_usb->typec_vbus_enable_val);
> +		usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_hikey_usb_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *root = dev->of_node;
> +	struct hisi_hikey_usb *hisi_hikey_usb;
> +	int ret;
> +
> +	hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
> +	if (!hisi_hikey_usb)
> +		return -ENOMEM;
> +
> +	hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
> +
> +	ret = of_property_read_u32(root, "typec-vbus-enable-val",
> +				   &hisi_hikey_usb->typec_vbus_enable_val);
> +	if (ret)
> +		hisi_hikey_usb->typec_vbus_enable_val = 1;
> +
> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> +			hisi_hikey_usb->typec_vbus_enable_val ?
> +			GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
> +	if (!hisi_hikey_usb->typec_vbus)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
> +
> +	gpiod_direction_output(hisi_hikey_usb->typec_vbus,
> +			!hisi_hikey_usb->typec_vbus_enable_val);
maybe a simple way if use fixed regulator?

> +
> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", GPIOD_IN);
> +	if (!hisi_hikey_usb->otg_switch)
> +		return -ENOENT;
> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
> +
> +	gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB);
> +
> +	/* hub-vdd33-en is optional */
> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> +			GPIOD_OUT_LOW);
> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
> +
> +	gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON);
ditto
> +
> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> +	if (!hisi_hikey_usb->role_sw)
> +		return -EPROBE_DEFER;
> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
> +		return PTR_ERR(hisi_hikey_usb->role_sw);
> +
> +	ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +	if (ret) {
> +		usb_role_switch_put(hisi_hikey_usb->role_sw);
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, hisi_hikey_usb);
> +
> +	return 0;
> +}
> +
> +static int  hisi_hikey_usb_remove(struct platform_device *pdev)
> +{
> +	struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
> +			&hisi_hikey_usb->nb);
> +
> +	usb_role_switch_put(hisi_hikey_usb->role_sw);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id id_table_hisi_hikey_usb[] = {
> +	{.compatible = "hisilicon,gpio_hubv1"},
> +	{.compatible = "hisilicon,hikey960_usb"},
> +	{}
> +};
> +
> +static struct platform_driver hisi_hikey_usb_driver = {
> +	.probe = hisi_hikey_usb_probe,
> +	.remove = hisi_hikey_usb_remove,
> +	.driver = {
> +		.name = DEVICE_DRIVER_NAME,
> +		.of_match_table = id_table_hisi_hikey_usb,
> +	},
> +};
> +
> +module_platform_driver(hisi_hikey_usb_driver);
> +
> +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
> +MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
> +MODULE_LICENSE("GPL v2");

[v2,08/10] hikey960: Support usb functionality of Hikey960

[Yu Chen]

Hi,

On 2019/2/19 10:50, Chunfeng Yun wrote:
>> +	if (ret)
>> +		hisi_hikey_usb->typec_vbus_enable_val = 1;
>> +
>> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>> +			hisi_hikey_usb->typec_vbus_enable_val ?
>> +			GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
>> +	if (!hisi_hikey_usb->typec_vbus)
>> +		return -ENOENT;
>> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
>> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
>> +
>> +	gpiod_direction_output(hisi_hikey_usb->typec_vbus,
>> +			!hisi_hikey_usb->typec_vbus_enable_val);
> maybe a simple way if use fixed regulator?
> 
The hardware of the Hikey960 board has been fixed, and the type-c
port can act as UFP. So it is better to close the vbus when Hikey960
connect to host(e.g PC).
>> +
>> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", GPIOD_IN);
>> +	if (!hisi_hikey_usb->otg_switch)
>> +		return -ENOENT;
>> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
>> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
>> +
>> +	gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB);
>> +
>> +	/* hub-vdd33-en is optional */
>> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
>> +			GPIOD_OUT_LOW);
>> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
>> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
>> +
>> +	gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON);
> ditto
>> +
>> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>> +	if (!hisi_hikey_usb->role_sw)
>> +		return -EPROBE_DEFER;
>> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
>> +		return PTR_ERR(hisi_hikey_usb->role_sw);
>> +

Thanks
Yu Chen

[v2,08/10] hikey960: Support usb functionality of Hikey960

[Chunfeng Yun]

On Tue, 2019-02-19 at 11:20 +0800, Chen Yu wrote:
> Hi,
> 
> On 2019/2/19 10:50, Chunfeng Yun wrote:
> >> +	if (ret)
> >> +		hisi_hikey_usb->typec_vbus_enable_val = 1;
> >> +
> >> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
> >> +			hisi_hikey_usb->typec_vbus_enable_val ?
> >> +			GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
> >> +	if (!hisi_hikey_usb->typec_vbus)
> >> +		return -ENOENT;
> >> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
> >> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
> >> +
> >> +	gpiod_direction_output(hisi_hikey_usb->typec_vbus,
> >> +			!hisi_hikey_usb->typec_vbus_enable_val);
> > maybe a simple way if use fixed regulator?
> > 
> The hardware of the Hikey960 board has been fixed, and the type-c
> port can act as UFP. So it is better to close the vbus when Hikey960
> connect to host(e.g PC).
I guess you misunderstand what I mean?
Please refer to bindings/regulator/fixed-regulator.txt
If you control vbus by gpio, you can use fixed-regulator, it will be
easy to make compatible with other cases, think about using a LDO to
control vbus
> >> +
> >> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", GPIOD_IN);
> >> +	if (!hisi_hikey_usb->otg_switch)
> >> +		return -ENOENT;
> >> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
> >> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
> >> +
> >> +	gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB);
> >> +
> >> +	/* hub-vdd33-en is optional */
> >> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
> >> +			GPIOD_OUT_LOW);
> >> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
> >> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
> >> +
> >> +	gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON);
> > ditto
> >> +
> >> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
> >> +	if (!hisi_hikey_usb->role_sw)
> >> +		return -EPROBE_DEFER;
> >> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
> >> +		return PTR_ERR(hisi_hikey_usb->role_sw);
> >> +
> 
> Thanks
> Yu Chen
>

[v2,08/10] hikey960: Support usb functionality of Hikey960

[Yu Chen]

Hi Chunfeng Yun,

On 2019/2/22 15:32, Chunfeng Yun wrote:
> On Tue, 2019-02-19 at 11:20 +0800, Chen Yu wrote:
>> Hi,
>>
>> On 2019/2/19 10:50, Chunfeng Yun wrote:
>>>> +	if (ret)
>>>> +		hisi_hikey_usb->typec_vbus_enable_val = 1;
>>>> +
>>>> +	hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
>>>> +			hisi_hikey_usb->typec_vbus_enable_val ?
>>>> +			GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
>>>> +	if (!hisi_hikey_usb->typec_vbus)
>>>> +		return -ENOENT;
>>>> +	else if (IS_ERR(hisi_hikey_usb->typec_vbus))
>>>> +		return PTR_ERR(hisi_hikey_usb->typec_vbus);
>>>> +
>>>> +	gpiod_direction_output(hisi_hikey_usb->typec_vbus,
>>>> +			!hisi_hikey_usb->typec_vbus_enable_val);
>>> maybe a simple way if use fixed regulator?
>>>
>> The hardware of the Hikey960 board has been fixed, and the type-c
>> port can act as UFP. So it is better to close the vbus when Hikey960
>> connect to host(e.g PC).
> I guess you misunderstand what I mean?
> Please refer to bindings/regulator/fixed-regulator.txt
> If you control vbus by gpio, you can use fixed-regulator, it will be
> easy to make compatible with other cases, think about using a LDO to
> control vbus
Sorry for misunderstanding the fixed-regulator and thanks for your advice!
I have read bindings/regulator/fixed-regulator.txt and I think it is enough
to use gpiod API right now.
>>>> +
>>>> +	hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", GPIOD_IN);
>>>> +	if (!hisi_hikey_usb->otg_switch)
>>>> +		return -ENOENT;
>>>> +	else if (IS_ERR(hisi_hikey_usb->otg_switch))
>>>> +		return PTR_ERR(hisi_hikey_usb->otg_switch);
>>>> +
>>>> +	gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB);
>>>> +
>>>> +	/* hub-vdd33-en is optional */
>>>> +	hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en",
>>>> +			GPIOD_OUT_LOW);
>>>> +	if (IS_ERR(hisi_hikey_usb->hub_vbus))
>>>> +		return PTR_ERR(hisi_hikey_usb->hub_vbus);
>>>> +
>>>> +	gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON);
>>> ditto
>>>> +
>>>> +	hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
>>>> +	if (!hisi_hikey_usb->role_sw)
>>>> +		return -EPROBE_DEFER;
>>>> +	else if (IS_ERR(hisi_hikey_usb->role_sw))
>>>> +		return PTR_ERR(hisi_hikey_usb->role_sw);
>>>> +
>>
>> Thanks
>> Yu Chen
>>
> 

Thanks
Yu Chen