From: Thierry Reding <thierry.reding@gmail.com>
To: JC Kuo <jckuo@nvidia.com>
Cc: gregkh@linuxfoundation.org, jonathanh@nvidia.com,
linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH] xhci: tegra: mbox registers address in"soc" data
Date: Mon, 2 Sep 2019 09:57:23 +0200 [thread overview]
Message-ID: <20190902075723.GD930@ulmo> (raw)
In-Reply-To: <20190902035445.32046-1-jckuo@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 6094 bytes --]
On Mon, Sep 02, 2019 at 11:54:45AM +0800, JC Kuo wrote:
> Tegra194 XUSB host controller has rearranged mailbox registers. This
> commit makes mailbox registers address a part of "soc" data so that
> xhci-tegra driver can be used for Tegra194.
>
> Signed-off-by: JC Kuo <jckuo@nvidia.com>
> ---
> drivers/usb/host/xhci-tegra.c | 51 ++++++++++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 12 deletions(-)
I'd perhaps reformulate the subject a little to be something like:
xhci: tegra: Parameterize mailbox register addresses
Two other minor comments below.
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index dafc65911fc0..b92a03bbbd2c 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -146,6 +146,13 @@ struct tegra_xusb_phy_type {
> unsigned int num;
> };
>
> +struct tega_xusb_mbox_regs {
> + u32 cmd;
> + u32 data_in;
> + u32 data_out;
> + u32 owner;
> +};
Perhaps make these unsigned int (or unsigned long). Making these
explicitly sized variables suggests (at least to me) that they are
register values, whereas they really are offsets. So I prefer to use
"unsized" types to distinguish between register offsets and values.
> +
> struct tegra_xusb_soc {
> const char *firmware;
> const char * const *supply_names;
> @@ -160,6 +167,8 @@ struct tegra_xusb_soc {
> } usb2, ulpi, hsic, usb3;
> } ports;
>
> + struct tega_xusb_mbox_regs mbox;
> +
> bool scale_ss_clock;
> bool has_ipfs;
> };
> @@ -395,15 +404,15 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> * ACK/NAK messages.
> */
> if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
> + value = fpci_readl(tegra, tegra->soc->mbox.owner);
> if (value != MBOX_OWNER_NONE) {
> dev_err(tegra->dev, "mailbox is busy\n");
> return -EBUSY;
> }
>
> - fpci_writel(tegra, MBOX_OWNER_SW, XUSB_CFG_ARU_MBOX_OWNER);
> + fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
>
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
> + value = fpci_readl(tegra, tegra->soc->mbox.owner);
> if (value != MBOX_OWNER_SW) {
> dev_err(tegra->dev, "failed to acquire mailbox\n");
> return -EBUSY;
> @@ -413,17 +422,17 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> }
>
> value = tegra_xusb_mbox_pack(msg);
> - fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_DATA_IN);
> + fpci_writel(tegra, value, tegra->soc->mbox.data_in);
>
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
> + value = fpci_readl(tegra, tegra->soc->mbox.cmd);
> value |= MBOX_INT_EN | MBOX_DEST_FALC;
> - fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
> + fpci_writel(tegra, value, tegra->soc->mbox.cmd);
>
> if (wait_for_idle) {
> unsigned long timeout = jiffies + msecs_to_jiffies(250);
>
> while (time_before(jiffies, timeout)) {
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
> + value = fpci_readl(tegra, tegra->soc->mbox.owner);
> if (value == MBOX_OWNER_NONE)
> break;
>
> @@ -431,7 +440,7 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
> }
>
> if (time_after(jiffies, timeout))
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
> + value = fpci_readl(tegra, tegra->soc->mbox.owner);
>
> if (value != MBOX_OWNER_NONE)
> return -ETIMEDOUT;
> @@ -598,16 +607,16 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
>
> mutex_lock(&tegra->lock);
>
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_DATA_OUT);
> + value = fpci_readl(tegra, tegra->soc->mbox.data_out);
> tegra_xusb_mbox_unpack(&msg, value);
>
> - value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
> + value = fpci_readl(tegra, tegra->soc->mbox.cmd);
> value &= ~MBOX_DEST_SMI;
> - fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
> + fpci_writel(tegra, value, tegra->soc->mbox.cmd);
>
> /* clear mailbox owner if no ACK/NAK is required */
> if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
> - fpci_writel(tegra, MBOX_OWNER_NONE, XUSB_CFG_ARU_MBOX_OWNER);
> + fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
>
> tegra_xusb_mbox_handle(tegra, &msg);
>
> @@ -1365,6 +1374,12 @@ static const struct tegra_xusb_soc tegra124_soc = {
> },
> .scale_ss_clock = true,
> .has_ipfs = true,
> + .mbox = {
> + .cmd = XUSB_CFG_ARU_MBOX_CMD,
> + .data_in = XUSB_CFG_ARU_MBOX_DATA_IN,
> + .data_out = XUSB_CFG_ARU_MBOX_DATA_OUT,
> + .owner = XUSB_CFG_ARU_MBOX_OWNER,
> + },
> };
> MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
>
> @@ -1397,6 +1412,12 @@ static const struct tegra_xusb_soc tegra210_soc = {
> },
> .scale_ss_clock = false,
> .has_ipfs = true,
> + .mbox = {
> + .cmd = XUSB_CFG_ARU_MBOX_CMD,
> + .data_in = XUSB_CFG_ARU_MBOX_DATA_IN,
> + .data_out = XUSB_CFG_ARU_MBOX_DATA_OUT,
> + .owner = XUSB_CFG_ARU_MBOX_OWNER,
> + },
> };
> MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
>
> @@ -1422,6 +1443,12 @@ static const struct tegra_xusb_soc tegra186_soc = {
> },
> .scale_ss_clock = false,
> .has_ipfs = false,
> + .mbox = {
> + .cmd = XUSB_CFG_ARU_MBOX_CMD,
> + .data_in = XUSB_CFG_ARU_MBOX_DATA_IN,
> + .data_out = XUSB_CFG_ARU_MBOX_DATA_OUT,
> + .owner = XUSB_CFG_ARU_MBOX_OWNER,
> + },
You're already giving these registers names via the new parameters, so I
don't think we need the symbolic names. This usually just leads to weird
things like:
#define XUSB_CFG_ARU_MBOX_CMD_T194 ...
#define XUSB_CFG_ARU_MBOX_DATA_IN_T194 ...
#define XUSB_CFG_ARU_MBOX_DATA_OUT_T194 ...
#define XUSB_CFG_ARU_MBOX_OWNER_T194 ...
.mbox = {
.cmd = XUSB_CFG_ARU_MBOX_CMD_T194,
.data_in = XUSB_CFG_ARU_MBOX_DATA_IN_T194,
.data_out = XUSB_CFG_ARU_MBOX_DATA_OUT_T194,
.owner = XUSB_CFG_ARU_MBOX_OWNER_T194,
},
Just remove the symbolic names and use the literal address in the
structure definition.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-09-02 7:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-02 3:54 [PATCH] xhci: tegra: mbox registers address in"soc" data JC Kuo
2019-09-02 7:57 ` Thierry Reding [this message]
2019-09-02 7:59 ` JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190902075723.GD930@ulmo \
--to=thierry.reding@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jckuo@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox