Re: [PATCH v2 1/1] usb: cdns3: add NXP imx8qm glue layer

[Peter Chen <peter.chen@nxp.com>]

On 20-01-11 20:25:59, Greg KH wrote:
> On Thu, Jan 09, 2020 at 05:35:58PM +0800, Peter Chen wrote:
> > There is a Cadence USB3 core for imx8qm and imx8qxp SoCs, the cdns
> > core is the child for this glue layer device.
> > 
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > ---
> > Changes for v2:
> > - Add COMPILE_TEST Kconfig option
> > - Using BIT Macro for definition
> > - Delete runtime pm operation
> > 
> >  drivers/usb/cdns3/Kconfig     |  10 ++
> >  drivers/usb/cdns3/Makefile    |   1 +
> >  drivers/usb/cdns3/cdns3-imx.c | 216 ++++++++++++++++++++++++++++++++++
> >  3 files changed, 227 insertions(+)
> >  create mode 100644 drivers/usb/cdns3/cdns3-imx.c
> > 
> > diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> > index 2a1e89d12ed9..84716d216ae5 100644
> > --- a/drivers/usb/cdns3/Kconfig
> > +++ b/drivers/usb/cdns3/Kconfig
> > @@ -53,4 +53,14 @@ config USB_CDNS3_TI
> >  
> >  	  e.g. J721e.
> >  
> > +config USB_CDNS3_IMX
> > +	tristate "Cadence USB3 support on NXP i.MX platforms"
> > +	depends on ARCH_MXC || COMPILE_TEST
> > +	default USB_CDNS3
> > +	help
> > +	  Say 'Y' or 'M' here if you are building for NXP i.MX
> > +	  platforms that contain Cadence USB3 controller core.
> > +
> > +	  For example, imx8qm and imx8qxp.
> 
> What will the module name be?
> 

I will add module name at Kconfig, thanks.

-- 

Thanks,
Peter Chen