[PATCH 2/3] Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"

[Mathias Nyman <mathias.nyman@linux.intel.com>]

This reverts commit 4c2604a9a6899bab195edbee35fc8d64ce1444aa.

Asynch probe caused regression in a setup with both Renesas and Intel xHC
controllers. Devices connected to the Renesas disconnected shortly after
boot. With Asynch probe the busnumbers got interleaved.

xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4

Reason why this commit causes regression is still unknown, but revert it
while debugging the issue.

Link: https://lore.kernel.org/linux-usb/20230307132120.5897c5af@deangelis.fenrir.org.uk
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-pci.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index fb988e4ea924..6db07ca419c3 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -771,12 +771,11 @@ static struct pci_driver xhci_pci_driver = {
 	/* suspend and resume implemented later */
 
 	.shutdown = 	usb_hcd_pci_shutdown,
-	.driver = {
 #ifdef CONFIG_PM
-		.pm = &usb_hcd_pci_pm_ops,
-#endif
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	.driver = {
+		.pm = &usb_hcd_pci_pm_ops
 	},
+#endif
 };
 
 static int __init xhci_pci_init(void)
-- 
2.25.1