[PATCH v1 1/5] phy: amlogic: during USB PHY clkin obtaining, enable it

[Dmitry Rokosov <ddrokosov@sberdevices.ru>]

Previously, all Amlogic boards used the XTAL clock as the USB PHY input
clock, and it did not need to be enabled as it was the default board
clock. However, in new Amlogic SoCs such as the A1 family, USB PHY uses
a gated clock, so it is necessary to enable this gated clock during
probing.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/phy/amlogic/phy-meson-g12a-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
index 9d1efa0d9394..26b99fbe1026 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -315,7 +315,7 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	priv->clk = devm_clk_get(dev, "xtal");
+	priv->clk = devm_clk_get_enabled(dev, "xtal");
 	if (IS_ERR(priv->clk))
 		return PTR_ERR(priv->clk);
 
-- 
2.36.0