From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
niklas.neronin@linux.intel.com,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 10/21] usb: xhci: move all segment re-numbering to xhci_link_rings()
Date: Wed, 26 Jun 2024 15:48:24 +0300 [thread overview]
Message-ID: <20240626124835.1023046-11-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20240626124835.1023046-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
This is a preparation patch for switching from custom segment list
handling to using list.h functions.
Contain all segment re-numbering in xhci_link_rings() which links two
segments lists together, and performs all necessary adjustments for
them to fit together.
No need to send segment number to xhci_alloc_segments_for_ring()
as a parameter after this.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 68994ce21933..020a23ece74f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -153,7 +153,7 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring,
ring->last_seg = last;
}
- for (seg = last; seg != ring->last_seg; seg = seg->next)
+ for (seg = ring->enq_seg; seg != ring->last_seg; seg = seg->next)
seg->next->num = seg->num + 1;
}
@@ -324,12 +324,16 @@ EXPORT_SYMBOL_GPL(xhci_initialize_ring_info);
/* Allocate segments and link them for a ring */
static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
- struct xhci_segment **first, struct xhci_segment **last,
- unsigned int num_segs, unsigned int num,
- unsigned int cycle_state, enum xhci_ring_type type,
- unsigned int max_packet, gfp_t flags)
+ struct xhci_segment **first,
+ struct xhci_segment **last,
+ unsigned int num_segs,
+ unsigned int cycle_state,
+ enum xhci_ring_type type,
+ unsigned int max_packet,
+ gfp_t flags)
{
struct xhci_segment *prev;
+ unsigned int num = 0;
bool chain_links;
chain_links = xhci_link_chain_quirk(xhci, type);
@@ -388,9 +392,8 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
if (num_segs == 0)
return ring;
- ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
- &ring->last_seg, num_segs, 0, cycle_state, type,
- max_packet, flags);
+ ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg, &ring->last_seg, num_segs,
+ cycle_state, type, max_packet, flags);
if (ret)
goto fail;
@@ -428,10 +431,8 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
struct xhci_segment *last;
int ret;
- ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
- num_new_segs, ring->enq_seg->num + 1,
- ring->cycle_state, ring->type,
- ring->bounce_buf_len, flags);
+ ret = xhci_alloc_segments_for_ring(xhci, &first, &last, num_new_segs, ring->cycle_state,
+ ring->type, ring->bounce_buf_len, flags);
if (ret)
return -ENOMEM;
--
2.25.1
next prev parent reply other threads:[~2024-06-26 12:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 12:48 [PATCH 00/21] xhci features for usb-next Mathias Nyman
2024-06-26 12:48 ` [PATCH 01/21] xhci: Remove dead code in xhci_move_dequeue_past_td() Mathias Nyman
2024-06-26 12:48 ` [PATCH 02/21] xhci: show usb device name in xhci urb tracing Mathias Nyman
2024-06-26 12:48 ` [PATCH 03/21] xhci: Set correct transferred length for cancelled isoc transfers Mathias Nyman
2024-06-26 12:48 ` [PATCH 04/21] xhci: dbc: Allow users to modify DbC poll interval via sysfs Mathias Nyman
2024-06-26 12:48 ` [PATCH 05/21] usb: xhci: remove 'num_trbs' from struct 'xhci_td' Mathias Nyman
2024-06-26 12:48 ` [PATCH 06/21] usb: xhci: remove unused 'xhci' argument Mathias Nyman
2024-06-26 12:48 ` [PATCH 07/21] usb: xhci: remove unused argument from xhci_handle_cmd_config_ep() Mathias Nyman
2024-06-26 12:48 ` [PATCH 08/21] usb: xhci: remove unused argument from handle_port_status() Mathias Nyman
2024-06-26 12:48 ` [PATCH 09/21] usb: xhci: move link chain bit quirk checks into one helper function Mathias Nyman
2024-06-26 12:48 ` Mathias Nyman [this message]
2024-06-26 12:48 ` [PATCH 11/21] usb: xhci: move untargeted transfer event handling to a separate function Mathias Nyman
2024-06-26 12:48 ` [PATCH 12/21] usb: xhci: improve error message for targetless transfer event Mathias Nyman
2024-06-26 12:48 ` [PATCH 13/21] usb: xhci: remove obsolete sanity check debug messages Mathias Nyman
2024-06-26 12:48 ` [PATCH 14/21] xhci: rework xhci internal endpoint halt state detection Mathias Nyman
2024-06-26 12:48 ` [PATCH 15/21] usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped Mathias Nyman
2024-06-26 12:48 ` [PATCH 16/21] usb: xhci: remove false xhci_giveback_urb_in_irq() header comment Mathias Nyman
2024-06-26 12:48 ` [PATCH 17/21] usb: xhci: remove infinite loop prevention Mathias Nyman
2024-06-26 12:48 ` [PATCH 18/21] usb: xhci: move process TD code out of the while loop Mathias Nyman
2024-06-26 12:48 ` [PATCH 19/21] usb: xhci: add 'goto' for halted endpoint check in handle_tx_event() Mathias Nyman
2024-08-02 9:21 ` Michał Pecio
2024-08-02 9:39 ` Neronin, Niklas
2024-06-26 12:48 ` [PATCH 20/21] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to TGL Mathias Nyman
2024-06-26 12:48 ` [PATCH 21/21] xhci: sort out TRB Endpoint ID bitfield macros Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626124835.1023046-11-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox