From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
niklas.neronin@linux.intel.com,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 06/21] usb: xhci: remove unused 'xhci' argument
Date: Wed, 26 Jun 2024 15:48:20 +0300 [thread overview]
Message-ID: <20240626124835.1023046-7-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20240626124835.1023046-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Remove argument 'struct xhci_hcd *xhci' from functions which do not
utilize it. This change contributes to a simpler codebase by avoiding
redundant arguments.
Functions which have the argument removed:
check_interval()
xhci_num_trbs_free()
xhci_handle_cmd_enable_slot()
xhci_clear_interrupt_pending()
xhci_requires_manual_halt_cleanup()
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 35 ++++++++++++++---------------------
1 file changed, 14 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index dfde9d3cca02..c528dc97dd9a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -283,7 +283,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
* Only for transfer and command rings where driver is the producer, not for
* event rings.
*/
-static unsigned int xhci_num_trbs_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
+static unsigned int xhci_num_trbs_free(struct xhci_ring *ring)
{
struct xhci_segment *enq_seg = ring->enq_seg;
union xhci_trb *enq = ring->enqueue;
@@ -1490,8 +1490,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
-static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
- struct xhci_command *command, u32 cmd_comp_code)
+static void xhci_handle_cmd_enable_slot(int slot_id, struct xhci_command *command,
+ u32 cmd_comp_code)
{
if (cmd_comp_code == COMP_SUCCESS)
command->slot_id = slot_id;
@@ -1759,7 +1759,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
switch (cmd_type) {
case TRB_ENABLE_SLOT:
- xhci_handle_cmd_enable_slot(xhci, slot_id, cmd, cmd_comp_code);
+ xhci_handle_cmd_enable_slot(slot_id, cmd, cmd_comp_code);
break;
case TRB_DISABLE_SLOT:
xhci_handle_cmd_disable_slot(xhci, slot_id);
@@ -2141,9 +2141,7 @@ static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
* driver won't clear the halt in that case, so we need to issue a Set Transfer
* Ring Dequeue Pointer command manually.
*/
-static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
- struct xhci_ep_ctx *ep_ctx,
- unsigned int trb_comp_code)
+static int xhci_requires_manual_halt_cleanup(struct xhci_ep_ctx *ep_ctx, unsigned int trb_comp_code)
{
/* TRB completion codes that may require a manual halt cleanup */
if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
@@ -2328,8 +2326,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
case COMP_STOPPED_LENGTH_INVALID:
goto finish_td;
default:
- if (!xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code))
+ if (!xhci_requires_manual_halt_cleanup(ep_ctx, trb_comp_code))
break;
xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
trb_comp_code, ep->ep_index);
@@ -2804,8 +2801,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
slot_id, ep_index);
}
if (trb_comp_code == COMP_STALL_ERROR ||
- xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
- trb_comp_code)) {
+ xhci_requires_manual_halt_cleanup(ep_ctx, trb_comp_code)) {
xhci_handle_halted_endpoint(xhci, ep, NULL,
EP_HARD_RESET);
}
@@ -2925,8 +2921,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (trb_is_noop(ep_trb)) {
if (trb_comp_code == COMP_STALL_ERROR ||
- xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
- trb_comp_code))
+ xhci_requires_manual_halt_cleanup(ep_ctx, trb_comp_code))
xhci_handle_halted_endpoint(xhci, ep, td,
EP_HARD_RESET);
} else {
@@ -3046,8 +3041,7 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
}
/* Clear the interrupt pending bit for a specific interrupter. */
-static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci,
- struct xhci_interrupter *ir)
+static void xhci_clear_interrupt_pending(struct xhci_interrupter *ir)
{
if (!ir->ip_autoclear) {
u32 irq_pending;
@@ -3068,7 +3062,7 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
int err;
u64 temp;
- xhci_clear_interrupt_pending(xhci, ir);
+ xhci_clear_interrupt_pending(ir);
/* Event ring hasn't been allocated yet. */
if (!ir->event_ring || !ir->event_ring->dequeue) {
@@ -3241,7 +3235,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
if (ep_ring != xhci->cmd_ring) {
new_segs = xhci_ring_expansion_needed(xhci, ep_ring, num_trbs);
- } else if (xhci_num_trbs_free(xhci, ep_ring) <= num_trbs) {
+ } else if (xhci_num_trbs_free(ep_ring) <= num_trbs) {
xhci_err(xhci, "Do not support expand command ring\n");
return -ENOMEM;
}
@@ -3416,8 +3410,7 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
-static void check_interval(struct xhci_hcd *xhci, struct urb *urb,
- struct xhci_ep_ctx *ep_ctx)
+static void check_interval(struct urb *urb, struct xhci_ep_ctx *ep_ctx)
{
int xhci_interval;
int ep_interval;
@@ -3458,7 +3451,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct xhci_ep_ctx *ep_ctx;
ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
- check_interval(xhci, urb, ep_ctx);
+ check_interval(urb, ep_ctx);
return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
@@ -4263,7 +4256,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
* Check interval value. This should be done before we start to
* calculate the start frame value.
*/
- check_interval(xhci, urb, ep_ctx);
+ check_interval(urb, ep_ctx);
/* Calculate the start frame and put it in urb->start_frame. */
if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
--
2.25.1
next prev parent reply other threads:[~2024-06-26 12:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 12:48 [PATCH 00/21] xhci features for usb-next Mathias Nyman
2024-06-26 12:48 ` [PATCH 01/21] xhci: Remove dead code in xhci_move_dequeue_past_td() Mathias Nyman
2024-06-26 12:48 ` [PATCH 02/21] xhci: show usb device name in xhci urb tracing Mathias Nyman
2024-06-26 12:48 ` [PATCH 03/21] xhci: Set correct transferred length for cancelled isoc transfers Mathias Nyman
2024-06-26 12:48 ` [PATCH 04/21] xhci: dbc: Allow users to modify DbC poll interval via sysfs Mathias Nyman
2024-06-26 12:48 ` [PATCH 05/21] usb: xhci: remove 'num_trbs' from struct 'xhci_td' Mathias Nyman
2024-06-26 12:48 ` Mathias Nyman [this message]
2024-06-26 12:48 ` [PATCH 07/21] usb: xhci: remove unused argument from xhci_handle_cmd_config_ep() Mathias Nyman
2024-06-26 12:48 ` [PATCH 08/21] usb: xhci: remove unused argument from handle_port_status() Mathias Nyman
2024-06-26 12:48 ` [PATCH 09/21] usb: xhci: move link chain bit quirk checks into one helper function Mathias Nyman
2024-06-26 12:48 ` [PATCH 10/21] usb: xhci: move all segment re-numbering to xhci_link_rings() Mathias Nyman
2024-06-26 12:48 ` [PATCH 11/21] usb: xhci: move untargeted transfer event handling to a separate function Mathias Nyman
2024-06-26 12:48 ` [PATCH 12/21] usb: xhci: improve error message for targetless transfer event Mathias Nyman
2024-06-26 12:48 ` [PATCH 13/21] usb: xhci: remove obsolete sanity check debug messages Mathias Nyman
2024-06-26 12:48 ` [PATCH 14/21] xhci: rework xhci internal endpoint halt state detection Mathias Nyman
2024-06-26 12:48 ` [PATCH 15/21] usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped Mathias Nyman
2024-06-26 12:48 ` [PATCH 16/21] usb: xhci: remove false xhci_giveback_urb_in_irq() header comment Mathias Nyman
2024-06-26 12:48 ` [PATCH 17/21] usb: xhci: remove infinite loop prevention Mathias Nyman
2024-06-26 12:48 ` [PATCH 18/21] usb: xhci: move process TD code out of the while loop Mathias Nyman
2024-06-26 12:48 ` [PATCH 19/21] usb: xhci: add 'goto' for halted endpoint check in handle_tx_event() Mathias Nyman
2024-08-02 9:21 ` Michał Pecio
2024-08-02 9:39 ` Neronin, Niklas
2024-06-26 12:48 ` [PATCH 20/21] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to TGL Mathias Nyman
2024-06-26 12:48 ` [PATCH 21/21] xhci: sort out TRB Endpoint ID bitfield macros Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626124835.1023046-7-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox