Linux USB
 help / color / mirror / Atom feed
From: Stefan Wahren <wahrenst@gmx.net>
To: "Russell King" <linux@armlinux.org.uk>,
	"Doug Anderson" <dianders@chromium.org>,
	"Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Ray Jui" <rjui@broadcom.com>,
	"Scott Branden" <sbranden@broadcom.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Jassi Brar" <jassisinghbrar@gmail.com>,
	"Maíra Canal" <mcanal@igalia.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Minas Harutyunyan" <hminas@synopsys.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Lukas Wunner <lukas@wunner.de>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>,
	Peter Robinson <pbrobinson@gmail.com>,
	dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com, linux-pm@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel-list@raspberrypi.com, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V3 1/9] mailbox: bcm2835: Fix timeout during suspend mode
Date: Wed, 21 Aug 2024 23:40:44 +0200	[thread overview]
Message-ID: <20240821214052.6800-2-wahrenst@gmx.net> (raw)
In-Reply-To: <20240821214052.6800-1-wahrenst@gmx.net>

During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].

Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.

[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
 rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G         C         6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs

Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/mailbox/bcm2835-mailbox.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mailbox/bcm2835-mailbox.c b/drivers/mailbox/bcm2835-mailbox.c
index fbfd0202047c..ea12fb8d2401 100644
--- a/drivers/mailbox/bcm2835-mailbox.c
+++ b/drivers/mailbox/bcm2835-mailbox.c
@@ -145,7 +145,8 @@ static int bcm2835_mbox_probe(struct platform_device *pdev)
 	spin_lock_init(&mbox->lock);

 	ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0),
-			       bcm2835_mbox_irq, 0, dev_name(dev), mbox);
+			       bcm2835_mbox_irq, IRQF_NO_SUSPEND, dev_name(dev),
+			       mbox);
 	if (ret) {
 		dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
 			ret);
--
2.34.1


  reply	other threads:[~2024-08-21 21:41 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-21 21:40 [PATCH V3 0/9] ARM: bcm2835: Implement initial S2Idle for Raspberry Pi Stefan Wahren
2024-08-21 21:40 ` Stefan Wahren [this message]
2024-08-31  9:19   ` [PATCH V3 1/9] mailbox: bcm2835: Fix timeout during suspend mode Stefan Wahren
2024-09-01 20:26     ` Jassi Brar
2024-09-01 20:57       ` Stefan Wahren
2024-08-21 21:40 ` [PATCH V3 2/9] drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get Stefan Wahren
2024-08-22 13:09   ` Maíra Canal
2024-08-21 21:40 ` [PATCH V3 3/9] drm/vc4: Get the rid of DRM_ERROR() Stefan Wahren
2024-08-22 13:10   ` Maíra Canal
2024-08-21 21:40 ` [PATCH V3 4/9] drm/vc4: hdmi: add PM suspend/resume support Stefan Wahren
2024-08-22 12:10   ` kernel test robot
2024-08-21 21:40 ` [PATCH V3 5/9] drm/vc4: v3d: simplify clock retrieval Stefan Wahren
2024-08-22 13:12   ` Maíra Canal
2024-08-21 21:40 ` [PATCH V3 6/9] drm/vc4: v3d: add PM suspend/resume support Stefan Wahren
2024-08-21 21:40 ` [PATCH V3 7/9] usb: dwc2: Refactor backup/restore of registers Stefan Wahren
2024-08-22  9:16   ` kernel test robot
2024-08-22 10:30   ` Stefan Wahren
2024-08-21 21:40 ` [PATCH V3 RFC 8/9] usb: dwc2: Implement recovery after PM domain off Stefan Wahren
2024-08-29 19:33   ` Doug Anderson
2024-08-21 22:36 ` [PATCH V3 9/9] ARM: bcm2835_defconfig: Enable SUSPEND Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240821214052.6800-2-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=Arthur.Petrosyan@synopsys.com \
    --cc=airlied@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel@ffwll.ch \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hminas@synopsys.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=kernel-list@raspberrypi.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lukas@wunner.de \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mcanal@igalia.com \
    --cc=mripard@kernel.org \
    --cc=pbrobinson@gmail.com \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox