public inbox for linux-usb@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: Chen Changcheng <chenchangcheng@kylinos.cn>
Cc: stern@rowland.harvard.edu, benjamin.tissoires@redhat.com,
	linux-usb@vger.kernel.org, usb-storage@lists.one-eyed-alien.net,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
Date: Wed, 17 Dec 2025 14:50:01 +0100	[thread overview]
Message-ID: <2025121742-spendable-hardened-56e2@gregkh> (raw)
In-Reply-To: <20251203071643.57058-1-chenchangcheng@kylinos.cn>

On Wed, Dec 03, 2025 at 03:16:43PM +0800, Chen Changcheng wrote:
> The optical drive of EL-R12 has the same vid and pid as INIC-3069,
> as follows:
> T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
> D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=13fd ProdID=3940 Rev= 3.10
> S:  Manufacturer=HL-DT-ST
> S:  Product= DVD+-RW GT80N
> S:  SerialNumber=423349524E4E38303338323439202020
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
> E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E:  Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> 
> This will result in the optical drive device also adding
> the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
> it will fail, and the reason for the failure is as follows:
> [  388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
> [  388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [  388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
> [  388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [  388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
> [  388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
> [  388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
> [  388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
> [  388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
> 
> For the EL-R12 standard optical drive, all operational commands
> and usage scenarios were tested without adding the IGNORE_RESIDUE quirks,
> and no issues were encountered. It can be reasonably concluded
> that removing the IGNORE_RESIDUE quirks has no impact.
> 
> Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
> ---
>  drivers/usb/storage/unusual_uas.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
> index 1477e31d7763..939a98c2d3f7 100644
> --- a/drivers/usb/storage/unusual_uas.h
> +++ b/drivers/usb/storage/unusual_uas.h
> @@ -98,7 +98,7 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
>  		US_FL_NO_ATA_1X),
>  
>  /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
> -UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
> +UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x0309,
>  		"Initio Corporation",
>  		"INIC-3069",
>  		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> 
> base-commit: 7d0a66e4bb9081d75c82ec4957c50034cb0ea449
> -- 
> 2.25.1
> 
>

This does not apply to 6.19-rc1 at all :(

Please rebase and resend it.

thanks,

greg k-h

  reply	other threads:[~2025-12-17 13:50 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-03  7:16 [PATCH v4] usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive Chen Changcheng
2025-12-17 13:50 ` Greg KH [this message]
  -- strict thread matches above, loose matches on Subject: below --
2025-11-25  5:32 Chen Changcheng
2025-11-26 12:00 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025121742-spendable-hardened-56e2@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=benjamin.tissoires@redhat.com \
    --cc=chenchangcheng@kylinos.cn \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=usb-storage@lists.one-eyed-alien.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox